CAD Creation For Cylindrical Planter

in CAD Design held by mwalker83
Contest Ended, Winner(s) have been selected.
Description:
We're in the process of producing a size range of cylindrical indoor/outdoor planters and need a high-res STEP file to provide to potential manufacturers.

This is a high-end homeware product so small details are important. We are open to any small design elements within the specified parameters that keep the product clean and minimal.
Wants:
We are looking to create 5 scaled sizes as follows:

EXTRA SMALL (Diameter 4", height 4")
SMALL (Diameter 8", height 8")
MEDIUM (Diameter 12", height 12")
LARGE (Diameter 16", height 16")
EXTRA LARGE (Diameter 20", height 20")

For all sizes:

- Wall thickness 1/4"
- Base thickness 1/2"

There needs to be a circular inset on the base of the of the planter to accommodate a stand. The inset should have a slight angle (see image attached). Inset diameters are as follows:

EXTRA SMALL (3")
SMALL (6")
MEDIUM (9")
LARGE (12")
EXTRA LARGE (15")

There should be no sharp edges on either the rim or base of the planter as per the references provided.
Don't Wants:
Please don't stray too far from the parameters and references provided. While this is a simple design, we don't want it to looks too rudimentary.
Ask for Sample:
Yes, please make size MEDIUM first and the winning designer will complete other sizes.
Software:
  1. SolidWorks
  2. Any CAD software

Entries

1st Winner
#92 Matte Modern Planters by sldraftingdesign
Here are the planters in a Matter finish. Also attached are all necessary files for manufacturing including STEP files and PDF technical drawings.
more
Dec 24, 2016 19:41
#80 Triangulated Planter by Oleksiy
Let me propose you a model that was created in 3DS Max and after that it was converted to Autodesk DWG.
more
Dec 21, 2016 12:37
#78 planter by adhyatma
Dec 21, 2016 9:44
#37 simple pot by techmymind
Dec 16, 2016 10:33
#22 draft 001 by Dragos Popovici
After you made the contest prepay I wil post bigger resolution
Thank you
more
Dec 13, 2016 15:12
#21 PLANTER MEDIUM (Diameter 12in x height 12in) by WyzeOwl
Neat simple design. 1.5deg draft angle makes de-molding easier if this is to be injection molded. As well, removing potted plants is easier being tapered. Raised bottom ribbing also allows users to place planted pots into the planter where the raised ribs in the bottom allow potted plants to drain.
more
Dec 13, 2016 15:01
#23 Planter by ODBDesign
Dec 13, 2016 19:21
#5 Cylindrical Planter by Aminegn
This is only Medium size as you asked.
more
Dec 11, 2016 22:35
#82 Сascade Planter by Oleksiy
Let me propose you a model that was created in 3DS Max and after that it was converted to Autodesk DWG.
Also, you can find additional pics in my portfolio:
https://www.cadcrowd.com/gallery/project/cylindrical-planter-v-1
https://www.cadcrowd.com/gallery/project/cylindrical-planter-v-2
Youtube videos: https://goo.gl/Nu8j2E
more
Dec 21, 2016 14:05
#19 MEDIUM by Dev Joshi
Dec 13, 2016 6:41
#68 Cylindrical Planter by Bodhayan
Cylindrical Planter with 20" height & 20' Inner dia
more
Dec 20, 2016 11:22
#71 Cad Creation For Cylindrical Planter by Michael Dimou
Dec 20, 2016 20:07
#58 Cylindrical Planter rev5 by Michael Dimou
Dec 19, 2016 18:32
#48 Cylindrical Planter rev3 by Michael Dimou
m.n.m
more
Dec 18, 2016 9:37
#42 Cylindrical Planter rev3 by Michael Dimou
A minimal design for the medium cylindrical Planter , If you have any question pm me.
more
Dec 16, 2016 22:27
#35 Cylindrical Planter rev2 by Michael Dimou
a taste of m.n.m
more
Dec 15, 2016 18:30
#34 Cylindrical Planter by Michael Dimou
good luck to everyone!!!
more
Dec 15, 2016 18:28
#76 Planter by eliajanineh
Dec 21, 2016 7:11
#91 Simple Planter by Akira
Simple aesthetic - Curved bottom for easy lifting - Insert for placement
more
Dec 21, 2016 22:49
#73 Planter by Akira
Simple aesthetic - Curved bottom for easy lifting - Insert for placement
more
Dec 21, 2016 1:46
#72 Planter by Akira
Simple aesthetic - Curved bottom for easy lifting - Insert for placement
more
Dec 21, 2016 1:44
#53 flower pot with handle by Dr. Dom
Dec 19, 2016 7:09
#36 flower pot 2 by Dr. Dom
the addition of side recesses would greatly aid in the picking up and relocation of larger pots.
more
Dec 16, 2016 6:17
#29 flow by Dr. Dom
The interior of the pot has a flat bottom, as does the cropped conical base (which could be any material, wood was used for contrast) and provides a very stable platform for the pot to sit on, but still allows for the flowing curve lines.
more
Dec 15, 2016 8:54
#33 12" Cylindrical Planter by thedesigningjd
This planter design includes drainage holes in the bottom of the planter and a base that collects excess water. The purpose of drainage holes is to prevent the plant and soil becoming infested with fungus and diseases due to excess water in the soil. With an indoor/outdoor planter it is best to have a base that collects the excess water so it does not damage the indoor flooring. This design is 12" including the height of the
more
Dec 15, 2016 16:54
#17 Planter by John Bagnasco
I am a landscape architect, and I used Rhino for this model.
more
Dec 13, 2016 4:22
#81 planer by eddipaul
Dec 21, 2016 12:40
#45 Medium planter by Redouan Elmirou
Based on your description you just want 3D files of your existing design instead of a whole new design, right? As you asked here is a "sample" of the medium sized planter. Let me know what you think! Happy to deliver all sizes if this one fits your needs!
regards, R Elmirou
more
Dec 17, 2016 21:45
#41 functional planter design concept by ARZSTUDIODESIGN
this design is simple and modern look, user can choose diverent aplication to the plamter. 1( with wood and leg) 2(just with leg) 3 (just with round wood) its a simple design and aplied..i hope u like it.
more
Dec 16, 2016 18:08
#6 Cylindrical Planter by Ahmed Abulkher
Cylindrical Planter
more
Dec 11, 2016 22:36
#4 mwalker83_pot_med00 by nyles
I tried fooling with the aesthetics of the design by adding a groove at the golden ratio - I like the simple version.
more
Dec 11, 2016 22:27
#86 Planter Proposal 3 by Harris M
Slight sectional dip on the top section of the planter, with horizontal grooves matching the silhouette, gradually straightening as it reaches the bottom. Base inset included, and material consideration is likewise ceramic.
more
Dec 21, 2016 17:49
#85 Planter Proposal 2 by Harris M
Simple horizontal grooves. Likewise inset on base included in model. Material consideration; ceramic.
more
Dec 21, 2016 17:43
#84 Planter Proposal 1 by Harris M
Vertical grooves extend out from the cylinder form. Details unseen but inset on base is included in the model. Material consideration: ceramic.
more
Dec 21, 2016 17:39
#56 CAD Creation For Cylindrical Planter by Engineer Festus
hello , attached is a dwg files, one with insert plate implanted to the cylinder forming one solid for easier molding while the other the inset and cylinder are two different objects.looking forward to work on the remaining cylinder plant sizes and their layout views
more
Dec 19, 2016 14:26
#70 Save Green Planter by Siddiqabdulraguman
It makes awareness indirectly to save the green. So that I made this design...
more
Dec 20, 2016 19:46
#57 Medium size cylindrical planter by Siddiqabdulraguman
Dec 19, 2016 16:48
#50 Medium size cylindrical planter by Siddiqabdulraguman
Dec 19, 2016 3:23
#74 CyPMD06 by zulfadzryl
Dec 21, 2016 5:08
#65 CyPMD05 by zulfadzryl
Dec 20, 2016 2:26

Discussion

ARZSTUDIODESIGN

Designer

Tue, 03 Jan 2017 07:59:45 +0000
thanjs mr, we hope u like

sldraftingdesign

Designer

Sun, 25 Dec 2016 00:35:26 +0000
Thank you so much!

mwalker83

Buyer

Sat, 24 Dec 2016 15:33:39 +0000
We'll be picking the winner later today - thanks to all that submitted!

edward m barnes

Designer

Thu, 22 Dec 2016 13:49:52 +0000
So how won?

sldraftingdesign

Designer

Wed, 21 Dec 2016 20:27:03 +0000
very NICE!

Dr. Dom

Designer

Sun, 18 Dec 2016 08:39:29 +0000
very nice.

Dr. Dom

Designer

Thu, 15 Dec 2016 14:07:44 +0000
thanks. sldraftingdesign.

my first time doing anything like this.

sldraftingdesign

Designer

Thu, 15 Dec 2016 14:00:39 +0000
, that is awesome. Kudos

Dragos Popovici

Designer

Tue, 13 Dec 2016 08:06:17 +0000
Do you have any material specification?

Aminegn

Designer

Mon, 12 Dec 2016 19:31:00 +0000
Hello buyer,
Can you please rate our designs?

Thanks,

mwalker83

Buyer

Mon, 12 Dec 2016 19:27:39 +0000
Hi, yes the specified height includes the thickness of the base of the planter itself but not the stand. Thanks!

sldraftingdesign

Designer

Mon, 12 Dec 2016 17:35:13 +0000
does the height you have specified include the thickness of the base? or is it the height of the rim then the thickness of the base?

Similar Contests on Cad Crowd

3D CAD Design Of A Dagger
I need a 3D CAD Drawing of a Dagger in a high-res STEP Format. It will be used for 3D Printing and also a graphite mold will be produced on a CNC Milling Machine. The mold will be used for casting silver. Attachment 1: Please follow this sample in regard to detail on the handle and the curves on the blade. Keep the length of the blade on the short side. This is a dagger......not a sword..
Design the World's Coolest & Most Advanced Sledge
To explore how far we can take the coolest design, the most advanced materials, and the most fun to be had on snow - I'm going to produce a limited number of graphene x carbon fibre x kevlar sledges. This will be the first time those three incredible materials have been combined, and will produce the worlds most advanced and most expensive sledge. I have the materials, facility, and team to make these, I just need the most awesome design! **PRIZE** I have offered $200 for the chosen design - however I plan to launch a Kickstarter to fund the manufacture following completion. So I will also add an additional $400 for the winner if the Kickstarter is successful. You will also be invited to the launch event in Manchester, UK (if successful).
GYM EQUIPMENT
I AM LOOKING TO COMBINE THE FUNCTIONALITY OF A TREADMILL AND A STAIR MASTER MACHINE INTO ONE. THIS WOULD MEAN THE STAIRS FROM THE STAIR MASTER WOULD NEED TO BE ABLE TO LAY FLAT WHEN THE USER SELECTS THE OPTION FOR THE TREADMILL. I WOULD LIKE FOR THE STEPS TO BE IN A ESCALATOR FORMAT/CONVEYOR BELT STYLE. THE MACHINE NEEDS TO BE ABLE TO INCLINE USING EITHER HYDRAULICS OR INCLINE MOTOR. THE ARMS OF THE MACHINE SHOULD BE ABLE TO FUNCTION WHEN IN EITHER mode, WHICH MEANS THEY NEEDS TO BE IN ARMS LENGTH. THE BED OF THE MACHINE WHEN IN INCLINE MODE SHOULD ADJUST WITH THE SCREEN SO THAT IS IN EYE REACH OF THE USER.
Bonadikombo Home
Use current hand drawn sketch as a general template. Convert to CAD, adding a foyer at the main entrance/door and toilet (with windows) off of the foyer before Living Room #1. Provide separation of some sort between the foyer and Living Room #1. Relative room sizes should be similar but exact dimensions are not required. Natural lighting of all areas is important. No HVAC systems. To be build in tropical Africa. 2D required, 3D will be nice. Feel free to use colors if needed.
Marijuana leaf for hood ornament
A simple marijuana leaf inside of a circle. This will be for a chrome hood ornament, so it should be "leaf-like" on both sides (3-D) with a ring around it and a one inch wide circular base under the ring where the leaf's base is. No colors necessary.