Exercise equipment design

Contest Closed
Description:
We are looking for a pretty simple piece of exercise equipment.

First, please see the attached photo. You will notice how the male is assisting the female with her sit ups by holding her feet down.

We'd like to create something that you could strap on to your shoes/ankles/heels so you wouldn't need a partner to weigh you down.

We don't want it to be too bulky of an item. Something that is light, can be easily carried, and has a good design.
Wants:
Design Detail
Color
Style
Software:
  1. None

Entries

#39 Adjustable Sit-up Stand by Mora Vaibhav
Its a unique height adjustable design equipped with rubber grips and foam supports which provide comfort to the trainee. If the frame is manufactured using aluminium, extreme light weight can be possible. Another advantage of this design is , there is no requirement of additional weight, but the self body weight is enough to hold the frame in stable position
more
2016-09-09 16:49:20
#38 Adjustable Sit-up Stand by Mora Vaibhav
Its a unique portable design where we can adjust the height of the supporting frame according to the individual's body ergonomics. This design is unique because there is no need of additional weight but body weight is enough for its stability. If made with aluminium, this can be made very light weight. special grippers and foams are added so as to increase the comfort of the trainee.
more
2016-09-09 16:40:04
#37 SitUps Free by CADesigner
Very light, taking advantage of the environment to sustain itself
more
2016-09-09 13:44:33
#36 Romancrunch by Kalaiyarasan
Product designed with seating facility provides upward force required to grip the feet on place when person sits and crunches. In conventional product it is achieved only when holder is over weighted. Thus it is less weighted easy to carry. Design is more ergonomic.
Inspired from clubs.
more
2016-09-09 11:05:44
#35 CRUNCHES EQUIPMENT by KP HARISANKAR
I have done simple part modeling. This is the simplest design possible. Works with the same principle of suction cup hooks. When a person gives support, he provides an average pressure of 0.05N/mm^2 to the person performing crunches. For safety purpose we can provide a pressure of 0.1N/mm^2 using this equipment by providing a vacuum area of 10000mm^2.
The red portion in the model can be rubber or cloth material thus reducing pain while performing exercise. It consists of 1 pair of stationary suction cup (black )at the 2 ends and 1 pair of movable suction cups (black with higher width) between the stationary ones. The movable suction cups can be adjusted according to the foot size of the individual so as to provide a firm grip.
The only disadvantage is that this can be used for indoor purpose only that too in smooth surfaces.
more
2016-09-01 18:37:24
#34 CRUNCHES EQUIPMENT by KP HARISANKAR
I have done simple part modeling. This is the simplest design possible. Works with the same principle of suction cup hooks. When a person gives support, he provides an average pressure of 0.05N/mm^2 to the person performing crunches. For safety purpose we can provide a pressure of 0.1N/mm^2 using this equipment by providing a vacuum area of 10000mm^2.
The red portion in the model can be rubber or cloth material thus reducing pain while performing exercise. It consists of 1 pair of stationary suction cup (black )at the 2 ends and 1 pair of movable suction cups (black with higher width) between the stationary ones. The movable suction cups can be adjusted according to the foot size of the individual so as to provide a firm grip.
The only disadvantage is that this can be used for indoor purpose only that too in smooth surfaces.
more
2016-09-01 18:29:15
#33 vaccum grip equipment by Rahul Nagare
Mechanism is simple button push and release mechanism.
Top button is for engaging mechanism.and side button is to release the mechanism.
Griping force is due to vacuum effect
more
2016-09-01 17:39:01
#32 Sit-up equipment by NP-Hardware
This equipment is designed to securely hold the user's feet down with a padded bar, which is pressed into position by the user's own weight.
The distance between the seat plate and the foot bar can be easily adjusted to fit the preference of the user. Adjustment is possible without the user having to change position on the equipment.
I've made the bars extend backwards slightly further than I've seen on many other designs, in order to ensure that the user's feet remain held firmly in position even when downward force at the seat plate is at its weakest (i.e., when the user has their back against the floor).
The bars and foot rest can be made from 25mm aluminium tubing, which can be given a robust powder coating in any colour you prefer. Polyurethane foam padding - standard on many pieces of gym equipment - can be applied in the places suggested on the model.
The seat plate can be made from a single piece of stamped steel. All pieces are designed to be held together, and are rendered adjustable, by a set of spring studs embedded in the bars, and a corresponding set of holes in the seat plate and foot bar.
This equipment should be light enough to be easily carried wherever needed, and in fact can easily be disassembled for easier movement if required.
Should you have any further recommendations, don't hesitate to contact me!
more
2016-08-24 08:11:01
#31 Exercise Equipment by Artificalis
You're contradicting your own info.
You want to have a light solution what you can easely cary around, so the part where you can put something on your feet to have it as a counterweight is already gone (need to catch the momentum arround the ass). So to make it light you have to work with something you can mount to the floor and strap your feet in.
I had the ultimate solution, you can open the model and see it yourself. Its light its easy and cheap.
Let me know what you think, if you have questions, feel free to contact me
more
2016-08-11 10:09:23
#30 sit ups by saurabh5496
Easy to use , easy to manufacture
more
2016-08-10 12:49:43
#29 Sit Up Equipment by Nabih Aldiyab
All the raw material you need is available in marketplace. no need to manufacture any parts. just cut and weld
more
2016-08-10 07:33:49
#28 Pocket Crunch Pal Update 1 by Rkagel
Made from strong lightweight aircraft grade aluminum tube the Pocket Crunch Pal is all you will need to get iron abs.
At over 2 feet long, 2 feet wide, and 3 inches thick when folded the Pocket Crunch Pal can fit nearly anywhere.
Every point of motion is friction fit to supply you with easy pin free folding and operation.
To top it all off the aluminum can be powder coated in nearly any color. This coating can handle even your craziest workout!
more
2016-08-10 05:31:27
#27 Pocket Crunch Pal by Rkagel
Made from strong lightweight aircraft grade aluminum tube the Pocket Crunch Pal is all you will need to get iron abs.
At over 2 feet long, 2 feet wide, and 3 inches thick when folded the Pocket Crunch Palm can fit nearly anywhere.
Every point of motion is friction fit to supply you with easy pin free folding and operation.
To top it all off the aluminum can be powder coated in nearly any color. This coating can handle even your craziest workout!
more
2016-08-10 05:06:50
#26 smpl by bidimage
update
more
2016-08-09 18:05:27
#25 Simple Situps by Nikhil Singh
Try to understand a bit complicated to explain in words.
How to use :
Sit near a wall and place it on your shoes and the straight rectangular part on the wall.Adjust the distance from wall to get a firm grip
How it works:
Shoes try to move up due to which the equipment tries to turn about the bend but because there is rough rubber at other end and it is long in length so equipment doesn't turn about the bend and thus doesn't go up. So shoes are not allowed upper movement.
Cons : Need a structure like a wall , tree or another structure for support.(but can be found easily)
Pros : Single piece!! , easy to carry , can be made foldable , simple to use like plug and play., No hassle of any strap or thinking of shoe size.
Note : I made the pics to explain the concept.The dimensions can be reduced to make it compact .Due to design the materials used need not to be too robust because legs hardly exert any upper force so light and inexpensive material can be used.
Please give your feedback asap. So I can make any changes to suit your needs better.
Thank you
more
2016-08-09 14:56:14
#23 Sit Up Equipment using slide board by Shin Gata Design
By using the concept of slide board, I change the bar to slide board. The material of seat will be same as the material slide shoes. (please to refer https://www.youtube.com/watch?v=I7gkFK7bZjI)
more
2016-08-06 18:36:49
#22 Exercise Equipment flexi by mds Design
The blue is anodized metal that has enough weight as needed to keep the feet on the floor, red is a flexible material to come in the leg
more
2016-08-05 18:42:59
#21 Workout Equipment Concept by Warren.G
It's made of tough plastic material. Light and strong.
more
2016-08-05 15:10:49
#20 Exercise Equipment Design by mds Design
This is an idea or a taste of a low cost Exercise equipment .
Just imagine !
I can make it every format you want.
more
2016-07-30 22:57:43
#19 Exercise Equipment by mds Design
This is an idea or a taste of a low cost Exercise equipment .
Just imagine !
I can make it every format you want.
more
2016-07-30 17:21:36
#16 foot holder by stylexdesign
2016-07-25 23:23:20
#15 Sit Up Equipment 2 by Shin Gata Design
Another exercise equipment modify from rowing machine. A bit different from the previous design.
more
2016-07-24 16:22:28
#14 Sit Up equipment by Shin Gata Design
Modify from rowing machine. Easy to use.
more
2016-07-24 13:38:05
#13 Sit up machine Ab-booster by ProjectZ
The model is consisted of 3 main parts and a small part. It has 7 levels of resistance and it is very easy to use. It can be stored under a bed, or if you have adequate space you can keep it assembled. All the parts are adjustable, and can be adjusted according to your needs. Let me know if you want to make some changes!
more
2016-07-21 20:55:06
#12 Ezy SitUps. by saurabh5496
This is the modified version of old one. This model is Lightweight,Portable, Easy to use, Fold able. We can adjust at any part, according to users requirement. Any male and female of age group 15 to 50 can be use it very effectively. It produces Great Locking Force results in better grip.
this product is cheap and easily assemble and disassembled. Non-technical person can be use it easily.
Ergonomically it is very comfortable. Is is to reliable and lightweight.
Also It is FLEXIBLE, we can adjust according to our comfort and pressure.
more
2016-07-16 05:44:05
#11 sK54 Ezy SitUps by saurabh5496
This is the modified version of previous model. In this I have provided Heel support. Also we can adjust Red portion (From fig.) to up and down as per users requirement. Hope u'll like it. Thank You
more
2016-07-15 11:12:28
#10 Sit up Helper by Cad Geek
Can be used for sit ups or push ups ....push the release valve on the side to release suction. More renders on my portfolio. Enjoy
more
2016-07-15 02:28:53
#9 sK54 Ezy SitUps by saurabh5496
This model is Lightweight,Portable, Easy to use, Foldable. Any male and female of age group 15 to 50 can be use it very effectively. It produces Great Locking Force results in better grip.
this product is cheap and easily assemble and dissassembled. Non-technical person can be use it easily.
Ergonomically it is very comfortable. I have made it at workshop and use it too. is is to reliable and lightweight.
Also It is FLEXIBLE, we can adjust according to our comfort and pressure.
more
2016-07-14 21:25:56
#8 Sit Ups machine by saurabh5496
This is the machine of dimensions 48*7 inches. and wt is 1 KG. its a foldable machine, as well as portable to. easy to carry. I have provided arrangement so that any persone from height 4to 7 feet long can use this machine easily and effectively. i have use material such that it is easily available and cheap
more
2016-07-13 05:38:51
#7 Exercise equipment design / Body Force Workout by manosh
Use force of your hands to hold body up & down.
more
2016-07-12 14:35:04
#6 Crunch Partner - details by Mcneim2
More details on the options of this design. Depending on the targeted final product cost and the targeted tooling cost there are many different ways to create the center hinge. It would be best to conduct some FEA and validate the ribs with a prototype.
more
2016-07-12 02:49:13
#5 Feet holder - exercises by bidimage
- simple and any color possible
more
2016-07-11 19:42:24
#4 The Rubber Sit Up by Nasib agape Banjarnahor
The Rubber Sit Up.
materials:
1. The soles of light wood and solid.
2. The elastic rubber.
how to use is.
1. insert foot into the sock that has been provided.
The size Rubber Sit Up.
30cm (L) x 28cm (D) x 2cm (T).
can be folded and put into bags.
more
2016-07-11 09:05:22
#3 SIT UPS DEVICE by VOOKA
2016-07-11 08:35:37
#2 Crunch partner by Mcneim2
Use your own body weight to hold your feet down for crunches. Made of sturdy yet light ABS this design folds flat for easy transport. You unfold the product, sit down at the far end and strap your feet in. This design has room for branding and customization like a cut out for a handle. This is a concept sketch and I will build the CAD based on any questions or comments.
more
2016-07-11 02:03:18
#1 Exercise equipment by Vladimir Nikolic
LEG HOLDER
more
2016-07-10 21:03:33

Discussion

kmokhtar

Buyer

Sun, 10 Jul 2016 21:00:08 +0000
It would primarily be used indoors, but will be used outdoors as well.

The only function would be to hold down your feet.
Sun, 10 Jul 2016 20:12:45 +0000
Would the item need to have more function other than holding down your feet?
Sun, 10 Jul 2016 20:05:35 +0000
Is there a maximum weight? where should it be used? outdoors? indoors? both?

Similar Contests on Cad Crowd

Choice FM Studio Furniture
I am building a radio station studio and need a design for the main console. I need a design for the carpenter to work from. I can provide information as to what my needs are. I also have the layout of the building the console will be housed in. Please send questions.
Street Elbow Mod.
I would like to know if you would be interested in creating a 3D model for the attached print/sketch? If so, please let me know cost and lead time . I would like to have .STEP and cad file. outside radii are not critical so just need to be close to what is shown. Schedule 40 PVC. Thank you, Ben Neal
Lady at play salon design
Upscale beauty salon 1200-2000 square feet. Should include 3 double side hair stations with chairs. Nail station , pedicure chairs, room for facial and massage., the most important thing about this concept is the design that allows for all components of a full service salon, makeup Bar, reception area.
The first drink sling ever made - Freelance 3D modeler, CAD designer
designing a drink that goes on your wrist wanting a sleeve or sling that can fit a juice pouch simmilar to capri sun you can design the pouch any way long as easy to fit in sling or sleeve and remove has a drink spout for the straw wich is lijke a water bottle top but better drink pouch 6.25 ounces or smaller
The gentlemans shaver
We need a design for a shaver handle. The design should have an exclusive look to it, not "spacey" as many established brands are. Keywords for the design could be "gentleman, scandinavian, hipster, modern man, elegant, James Bond, simple" and such. What we need is a design made in CAD, and ultimately files ready for production, our current setup requires .dwg or .dwt files. But we would like to see an realistic 3d render of the handle. There are though some specifications for the connection between the handle and the razor blades that should be met. Since the connection is an standard set of from our razor-blade production partner. In the attached files there are an example of an handle and the lock mechanism, so the way the blades are connected and the sliding lock works should be thought into the design. It's for the scandinavian market, so the design should fit in there, and should ofcourse have a good grib, size and weight to it. We have a target weight of minimum 50-60gr to the handle.