Teething Toy Design

in 3D Modeling Design held by bambeado
Contest Closed
Description:
We currently have a teething toy produced called Little bamBAM (it is the picture attached that looks like a giraffe). One of the aspects that mothers have commented on many times is that their children enjoy chewing on the horns – they are long enough to reach the back of the gums but they can’t push it down their throats and gag.

What I am hoping to have produced is a single molded product that has multiple protrusions, with different textures. I have attached images of some popular teething products that have some of these protrusions so you can see the type of textures I am referring to. The teething banana is one of the most popular baby products on Amazon right now so it would be good to have the toothbrush part included.

I am thinking this may need to be some sort of ring, but am open to suggestions. I have attached an image of an octopus that has multiple protrusions (although all the same texture) so this is one way the effect can be achieved.
Wants:
Single molded product
At least five protrusions that are no longer than 5cm from the main body.
There should be at least four different textures (similar to those on the product images attached) on the protrusions
There must also be texture on the main body of the product.
File Size Limit:
5 MB - 9.9 MB
Company Logo:
Yes
Software:
  1. ?

Entries

#31 Little Astronaut by KadeJM
Inspired by Deep Space, Guardians of the Galaxy, Aliens, Star Trek, and Stargate hence it's colors and strange warp gate-like appearance.
This is a teething ring fit for any little one with big dreams to infinity and beyond at warp speed of course!
It's ergonomic design is as smooth as a baby's butt with lots of little bumps that stick out allover, starter look-alike blocks, varied texturing everywhere, two nipple-like protrusions for suckling interests to assist with breastfeeding moms as needed, and a teething brush atop that even Baby Groot would be proud to have!
It's a perfect for holding a young space travelers interest keeping them entertained for hours on end!
more
May 25, 2017 23:37
#30 Teething Toy Design dry by Muhammad Yodi Supriadi
This design is designed with the theme of the cutters by displaying many grooves
more
May 25, 2017 8:40
#28 teeth toy for babies by Omar Farouk
this is a pre-design idea i think it's mechanically good because of the comfortable handles for the baby's hands and it's also a single molded product, it's editable so you can edit the texture and the overall shape can be edited as well
please send me a feedback even if you didn't choose my design so i can do better
more
May 19, 2017 23:49
#27 Teething Toy by DeBasstyan
I hope i will win!
more
May 18, 2017 7:35
#26 The Bee's Knees by Designasaurus
May 18, 2017 4:50
#25 Teething Toy by Stella X
Strawberry and ice cream teething toy. Ring can be removed.
more
May 15, 2017 3:09
#24 Starfish Teething Toy by RustyD
May 13, 2017 19:47
#23 hast tag Baby by Manuel Zaragoza
hast tag teeter.
http://a360.co/2pEipmY
more
May 12, 2017 6:40
#22 Teething Toy by Mahbub
Pending....
more
May 10, 2017 6:36
#21 Theeting Star by Pablo Gosso
Following project specs I created a really basic shape and added 5 different teething features with different shapes and sizes.
I follow ergonomic size according to similar product so the concept is already dimensioned for babies.
This is a parametric model so we can easily change any feature according to your needs.
I have already checked molding Draft so the shape is ready for mold/tool creation.
Looking forward to your feedback, Pablo
more
May 9, 2017 22:57
#20 Cute toothbrush by SHIVAM MISHRA
May 9, 2017 18:30
#19 Tétine by REDA
;)
more
May 5, 2017 22:48
#18 teething toy by Adam
May 5, 2017 19:22
#17 Panda Teething Toy by Designasaurus
May 4, 2017 1:18
#16 teething toy patrick by NabilZer
a whole new concept for teething toy ..patrick the teether , a cool design for baby's by me
more
May 4, 2017 0:24
#13 Cute turtle by SHIVAM MISHRA
May 1, 2017 14:30
#11 teething toy by arjunkhanna
design based on the inspiration from ship steering wheel
more
May 1, 2017 6:02
#10 giraffe_teether by astonetech
giraffe_teether
more
May 1, 2017 3:33
#9 Horn_teether by astonetech
Horn_teether
more
Apr 30, 2017 9:20
#8 Eagle_teether by astonetech
Eagle_teether
more
Apr 30, 2017 6:07
#6 torus by astonetech
Apr 28, 2017 14:55
#5 Circular by astonetech
Circular
more
Apr 28, 2017 14:53
#4 giraffe_teether by astonetech
giraffe_teether
more
Apr 28, 2017 8:45
#3 Flower by Stanislav Brodetskiy
Apr 27, 2017 16:37
#2 Koala_x by astonetech
Teethar Koala.
more
Apr 27, 2017 12:58
#1 Koala by astonetech
It is a 3d printable design.The available file format is .obj,.stl .
more
Apr 27, 2017 9:56

Discussion

KadeJM

Designer

Thu, 01 Jun 2017 14:49:34 +0000
@Adam probably cus of the prize money I would guess ;p

Adam

Designer

Thu, 04 May 2017 02:49:49 +0000
It's amazing how many people will spend the time for a no gurantee, payment pending contest.
Mon, 01 May 2017 16:29:47 +0000
Prepay the contest if you seek better designs. Just a suggestion.:)

Adam

Designer

Sat, 29 Apr 2017 02:14:34 +0000
You need to prepay the contest.

Similar Contests on Cad Crowd

The first drink sling ever made - Freelance 3D modeler, CAD designer
designing a drink that goes on your wrist wanting a sleeve or sling that can fit a juice pouch simmilar to capri sun you can design the pouch any way long as easy to fit in sling or sleeve and remove has a drink spout for the straw wich is lijke a water bottle top but better drink pouch 6.25 ounces or smaller
MuTT MoTE™ and MeOw MoTe™
Very simple stackable design for a pet feeder with the food in the middle and a mote of water around it. Center should be high enough to keep food dry and surrounding water mote area should be large and deep enough to hold enough water for the pet to drink.
Choice FM Studio Furniture
I am building a radio station studio and need a design for the main console. I need a design for the carpenter to work from. I can provide information as to what my needs are. I also have the layout of the building the console will be housed in. Please send questions.
Paint Poncho Pro
Paint Poncho Pro are wet paint brush and roller silicone protectors. I need 3D drawings to provide to my manufactures. They are asking for the file format to be in IGS or STP .
The gentlemans shaver
We need a design for a shaver handle. The design should have an exclusive look to it, not "spacey" as many established brands are. Keywords for the design could be "gentleman, scandinavian, hipster, modern man, elegant, James Bond, simple" and such. What we need is a design made in CAD, and ultimately files ready for production, our current setup requires .dwg or .dwt files. But we would like to see an realistic 3d render of the handle. There are though some specifications for the connection between the handle and the razor blades that should be met. Since the connection is an standard set of from our razor-blade production partner. In the attached files there are an example of an handle and the lock mechanism, so the way the blades are connected and the sliding lock works should be thought into the design. It's for the scandinavian market, so the design should fit in there, and should ofcourse have a good grib, size and weight to it. We have a target weight of minimum 50-60gr to the handle.