The interior of wooden houses

in 3D Modeling Design held by Michae1
Contest Closed

I urgently need to make the visualization of the interior of three houses. It's actually quite simple. All you need to do is just apply the material of wood in the interior (floors, ceiling, beams, etc.)
In some images you will need to make the fireplace, as specified in the example.
I attached 3 ready models with the camera settings. And all the other additions you will find in the attached file. In the example, there are all images which correspond to the name of each house.
Unfortunately I can't give more information, because that's all I was given by the customer. But if you carefully view all of the attached material, everything is clear described.
Maximum accordance with the example
Don't Wants:
The presence of furniture in the interior
  1. 3ds Max (3D Studio Max)


#11 2 room interior by zyrone levantino
Hi, this is my 2 render entry.
The other is on working progress and will complete soon.
I hope you like it
Nov 12, 2015 16:42
#10 Macmicken render (house 1 of 3) by EntropyMachine
Uploading the first house render while I'm working on the other two. Hope you like it, let me know if you need any change. Thank you.
Nov 12, 2015 5:07
#9 2nd house by poll
Nov 11, 2015 21:26
#8 pic 02 by viz_rado
Nov 10, 2015 21:55
#7 pic01 by viz_rado
Nov 10, 2015 21:54
#6 macmicken int c2 entry by zyrone levantino
Here is my version of the first interior.
Hope you like it. I am still working with the other rooms.
Nov 10, 2015 21:31
#5 Tuomi_ver1 by Dub Coonco
Hello. Here is second visualization from me. Please let me know if everything is ok. I can made changes as you will want.
Nov 10, 2015 20:31
#4 House by ProtoTech Workbench
I just uploaded this one too because i realised that i didn't uploaded yesterday.I rendered all the houses that you wanted and i have also put furniture into the randers. If you want something to be change, write me. Thank you!
Nov 10, 2015 8:50
#3 Wooden House by ProtoTech Workbench
Hello Michae,
Attached you'll find our work.
Please note that, even if you asked for renderings without presence of furniture in the interior, we've done both with and without it. I felt like something is empty there without furniture... Hope you don't mind that I've inserted some randeings with furniture.
We are a team made of architects, interior designers and engineers with experience.
Please send us a feedback over our work. If any modification is needed, please let me know and we will handle it right away.
Have a nice day,
ProtoTech Team
Nov 9, 2015 21:36
#2 Macmicken_ver1 by Dub Coonco
Hello here is my visualization for your project.
I am working on the other designs right now. Feel free to ask for changes and tweaks.
Nov 9, 2015 21:09
#1 first render by mop3d
config render with vray and photoshop traitement
Nov 9, 2015 12:40


Mon, 09 Nov 2015 12:15:51 +0000
Hi Michel
You said it's an urgent request but the deadline is for 18th, will that be ok if I send you before 18th or earlier?
Mon, 09 Nov 2015 11:24:02 +0000
Hi, I don't see anything but photographs in the .rar file. I take it there were supposed to be 3 models attached?



Mon, 09 Nov 2015 09:08:53 +0000
wait for my entry also.
Mon, 09 Nov 2015 07:56:23 +0000
Please wait for my entry.


Nasib Banjarnahor
Mon, 09 Nov 2015 05:47:55 +0000
Hi Michae1,

Unable to open the files.Can you resend the files in 3dsmax 9.


zyrone levantino


Sun, 08 Nov 2015 17:22:21 +0000
I am on it Michae1.
Please wait for my entry.


Similar Contests on Cad Crowd

Enclosure design for a building automation product
Our company is looking for enclosure designs for a set of 3 PCB modules which can connect together to form one single product. Our chosen manufacturer uses folded plastic sheet, although design ideas do not need to be limited to this process. The main board can feature as a standalone product but in many cases will be connected with the HV and I/O submodule boards, in which case they need to form a single product. There should be a lock-in mechanism on the side panels of the main enclosure to allow connection with HV board and I/O board. The Main board will have an LED panel illuminating the company logo (which will change colours based on the product status). Each individual enclosure should be DIN rail mountable. The top and bottom inputs and outputs modules on each board should be exposed so that appropriate connections can be made without opening the box. The way the three modules assemble together into one product should be similar to this: Beyond the technical specifications we are looking for a fresh design to take away the feel of an industrial product and make this looks more like a consumer product. We are looking for something sleek and fresh with the look and feel of a quality product.
Are you a motorbike rider?
Riding a bike means freedom, speed, joy, and pleasure. It also means risk and security. To wear the right equipment as a jacket, gloves, helmet and eventually trousers and boots will make the journey safer. Every rider wants the wind to slap the face, to feel the speed, the airflow, and still ride safely. I am a rider myself and I know the air is not clean at all. Pollution, insects and other small objects hit the run, blur the vision and become inevitably critical and dangerous. The product I seek to design solves this riding issue and it is developed by a rider for those about to ride. The design body is a textile wearable net, to be easily installed underneath the helmet's visor, wrapping the helmet, and getting fixed to the back and front by Velcro stripes or some other solution. The net material should have some flexibility, allowing for a tight surface when fixed to the helmet. The solution must have at least two anchors elements (front and back) to provide stability and prevent slip or wrinkles of the net. Adjustment, installation, and de-installation should be easy and fast. I am anxious about design proposals to be evaluated.
Euler Motors
Govt. of India has introduced new category of Vehicle - E Rickshaw last year primarily to uplift the working condition of rickshaw-pullers (from an otherwise physically taxing mode of commute, rickshaw pullers and drivers now have an easier and greener alternative.) E Rickshaw comes in two variant - Passenger Vehicle and Goods Carrier. Euler Motors is working on 3 Wheeler Electric Good Carrier variant for Indian Market - Tier 3/4 Markets { Villages, Small Townships }. Here is specification according to government :- 1. Top Speed = 25 Km/H 2. Load Capacity = 310 Kgs 3. Length x Width x Height = 2.8 m x 1 m x 1.8 m . (Dimensions are in Meters) Here are some of the existing version of E Rickshaw Goods Carrier :- Salient Features That Euler Motors is working on :- 4.3” Inch Digital Display { Link = } instead of Regular Dial based display { Link = }. This display will display stats around Speed, Battery Left, Temp., Headlights, Indicator Reverse Backup Camera : To enhance Safety of the vehicle and driver, a reverse backup camera will be attached to the rear - centre of the vehicle. Display from camera would appear on the 4.3” Digital display when vehicle reverses. Li Ion Battery will be placed in front of the vehicle {below the driver’s seat}. However the structure should be made in a way that the battery can taken out from enclosure within 2 minutes if required. Entire battery back will consist of 2 modules. Each module will be of following dimensions Each Module’s Weight = 12 Kgs Each Module’s size : Length x Width x Height = 220 mm x 210 mm x 355 mm 2 Modules can be arranged along the width of vehicle or height in the battery pack. Required Items inside the Vehicle:- Li Ion Charging Spot needs to be on the vehicle installed. Vehicle needs to include First Aid Box Mini Fire Extinguisher Vehicle Charging Point needs to be on vehicle { , } Standard vehicle parts - Front head light {LED headlight}, Front Indicator, Tail Lights, Rear Indicator, brake pedal. Accelerator in the conventional 3 wheeler are along the handle.