Customizable Headphone DesignBlind
in
3D Modeling Design
held by
ETEC
Last seen:
2019-05-14 11:38:47
Contest Ended, Winner(s) have been selected.
Description:
We want a customizable headphone design for our new product line. It represents the ability to customize based on likes of people. We would like the following files
- High Quality Renderings
- STL file that is 3D printable
- Dimensions in pdf file
Description:
Type: Switchable caps and switchable cushion headphone
Target Audience: 15-35 year old
Competitors: Enclosed for reference
Design: Switchable headphone caps (please refer to the enclosed switchable caps picture), 90° swivel earcups, On ear and over-ear switchable ear cushions (refer to enclosed switchable ear cushions picture), extendable, foldable headphone
Material: Plastic
Specification Details:
Driver Unit: 40mm
Connectivity: Bluetooth
LED Indicators to show battery, Power button with light indicators, One multi-function button, Volume button/s (But not limited to your design, please feel free to be creative)
Headband: Width- 22-28mm, Length- 30cm unexpended, 38cm extended length, Material: Soft Cushion
Earcup length/ size of the earcup: 6-8 cm x 6-8 cm x within 3.5cm thickness/ 6-8 diameter
Size range of Over the ear module including cushions: L75-90 mm x H75-90 mm x W25-33 mm
Size range of On the ear module including cushions: L50-75 mm x H50-75 mm x W20-28 mm
We would just like 3D printable ID design, and we will take care of mechanical design by ourselves.
Any software is acceptable, if STL format file can be provided.
Any further questions, please feel free to comment.
Wants:
Robust Design, Fashionable, Creativity
Entries
#1 headphone concept
by Decker
I have included a model of one set of headphones. A conversation needs to be engaged to flush out the exact geometry and dimension your looking for for a set of headphones. A designer will need more information in regards to the selected electronics that are planned for the interior of these headphones. The design I cam up with is fully parametric and can easily be adjusted in size with very little effort. If you like to move this concept into a more functional set of plans I would love to quote the job. Good luck in your projects future.
May 14, 2018 17:10
#27 Franz's Headphones
by franznoise
Download Files
- front — untitled.7
- back — untitled.8
- Over ear cushion perspective — untitled.9
- on ear cushion perspective — untitled.10
- Parts perspective — untitled.11
- ditail buttons on/off + battery — untitled.6
- side view overear cushions — untitled.14
- side view on ear cushions — untitled.13
- customizable caps — untitled.15
I think this is design is very contemporary, new, minimalistic and beautiful.
This kind of design could be very helpful for an industrial production and distribution.
Easy and suitable for everyone. The Customizable caps allow you to see the pattern well thanks to their smooth and clean spacious surface.
Great for dj too, because i imagine that the cable hide in the headbar can be off from the earbudcap. So allow to remove audio from left or right, just an idea.
I design a headbar mechanism with raised teeth that fit together with adjustable shots, you will then eventually think about a spring system hidden inside the earcap.
I think for the buttons:
Right side
1- (+) volume up/skip up track
2- (-) volume down/skip down track
Left side
1- on/off with led
2- battery with 3 leds 3 full battery, 2 semifull, 1 low battery and then it could be red flashing for 10 minuts
I hope you like my headphones.
For every kind of info contact me.
kind regards
Franz
This kind of design could be very helpful for an industrial production and distribution.
Easy and suitable for everyone. The Customizable caps allow you to see the pattern well thanks to their smooth and clean spacious surface.
Great for dj too, because i imagine that the cable hide in the headbar can be off from the earbudcap. So allow to remove audio from left or right, just an idea.
I design a headbar mechanism with raised teeth that fit together with adjustable shots, you will then eventually think about a spring system hidden inside the earcap.
I think for the buttons:
Right side
1- (+) volume up/skip up track
2- (-) volume down/skip down track
Left side
1- on/off with led
2- battery with 3 leds 3 full battery, 2 semifull, 1 low battery and then it could be red flashing for 10 minuts
I hope you like my headphones.
For every kind of info contact me.
kind regards
Franz
Jun 8, 2018 19:03
Discussion
Hi PatrickD3D! Thanks for your query, please feel free to submit animation along with renderings. Thanks and looking forward to your design.
Hi. I can create 3D renderings and an animation of your product. Just let me know. Thanks.
Although you mentioned plastic is there a limit on the kind of materials used or production methods for different parts?
Hello, I would like to know whether the final object shall be exported as an ASCII STL format or as a binary STL format file. Considering that an ASCII STL format file is usually larger than a binary format file, I guess you might prefer the latter. Thank you.
Similar Contests on Cad Crowd
Inventor product block maintenance
We have a large number of CAD blocks representing our product range which require alteration. The work is quite straight forward but high in volume. There will be a number of weeks work with the potential for ongoing work. An understanding of the vault filing system used for Inventor would be an advantage but is not essential.
Do Covid in Style: Innovative New Copper Masks to Stay Safe and Look Great!
High level, I would like to produce Covid Masks from a Hemp fabric that are fashionable, with a Copper Mesh as the breathing apparatus. The copper can be the entire face plate or just the mouth and/or nose.
The mask has to be very comfortable and easy to wear and to clean/wash.
Copper has many anti bacterial/anti virus benefits, and many cooling benefits. Hemp fabric also has cooling benefits. The Copper needs to be a type of mesh so it is easy to breathe in and out (vs. through the fabric, which creates heat).
The copper component needs to be breathable (small holes through the mesh) or some other approach.
One challenge is breathing out air into a mask creates Heat. A HUGE innovation would be if there are way to Cool the Mask (w water, a fan, etc) -- anything to keep the person wearing the mask cool.
These products will significantly improve health outcomes. In addition, they will be positioned as fashion statements -- so the Cool factor is very important.
Design the coolest penis rings
We already have a successful line of vibrating penis rings, to get an idea visit http://www.ovo.de/en/category/rings.
The new line will be different, though, ovo is a line created with a white, clean, mainstream concept, the new line will be branded LooP.
"LooP Maximum Performance"will be inspired in sports and concept cars, men worldwide appeal very well to sports cars and performance is always related to them, therefore, sexual performance can be inspired in sports cars.
Designers need to take the following into account:
1. Vibrating penis rings must meet their promise, they deliver orgasms by stimulating both, men and women during intercourse, designers must think of the ergonomics of sex, the ring constrains the flow of blood to the penis but the part that holds the motor serves a double purpose, it indirectly stimulates men and directly stimulates the clitoris, so successful designs must consider an elevation of the part that holds the motor.
2. I envision these rings as a fusion between the ring and a sports car, the front of the "car" is the ring and the hood holds the motor, the elevation that will get in contact with the clitoris is the "windshield" and the hood, the vibration from the motor will diffuse to the "windshield" and the "hood" the back of the ring is just pure design.
2. The material is medical grade silicone as it is stretchy and tissue safe, this also means the following constrains: Silicone is matt finished, attaining a glossy color is somewhat difficult but not impossible, there should not be too many elements in the ring as these rings perform in a "wet" environment, bacteria can get inside the joints of different layers.
3. I want 16 different rings, each of them inspired in a sports or concept car, we will have suggestive names for them like "Loop Stealth", "LooP M3", "LooP Viper", etc.
Finally, Have fun, I think it's an amazing project!!
PS. Attached is our number one selling penis ring from the current line, that will give you an idea on size, weight and motor positioning.
Also, I have attached a preliminary logo, the symbol you see is the celtic symbol of virility which could nicely be used in the rings the same way sports car have a symbol on the hood.
Euler Motors
Govt. of India has introduced new category of Vehicle - E Rickshaw last year primarily to uplift the working condition of rickshaw-pullers (from an otherwise physically taxing mode of commute, rickshaw pullers and drivers now have an easier and greener alternative.) E Rickshaw comes in two variant - Passenger Vehicle and Goods Carrier. Euler Motors is working on 3 Wheeler Electric Good Carrier variant for Indian Market - Tier 3/4 Markets { Villages, Small Townships }.
Here is specification according to government :-
1. Top Speed = 25 Km/H
2. Load Capacity = 310 Kgs
3. Length x Width x Height = 2.8 m x 1 m x 1.8 m . (Dimensions are in Meters)
Here are some of the existing version of E Rickshaw Goods Carrier :-
https://goo.gl/kTx6ho
https://goo.gl/vWCgjm
https://goo.gl/wFLdQZ
https://goo.gl/SSYsfy
https://goo.gl/3FTk7n
https://goo.gl/p2xjS3
Salient Features That Euler Motors is working on :-
4.3” Inch Digital Display { Link = https://goo.gl/5EJFuw } instead of Regular Dial based display { Link = https://goo.gl/CpC4fv }. This display will display stats around Speed, Battery Left, Temp., Headlights, Indicator
Reverse Backup Camera : To enhance Safety of the vehicle and driver, a reverse backup camera will be attached to the rear - centre of the vehicle. Display from camera would appear on the 4.3” Digital display when vehicle reverses.
Li Ion Battery will be placed in front of the vehicle {below the driver’s seat}. However the structure should be made in a way that the battery can taken out from enclosure within 2 minutes if required. Entire battery back will consist of 2 modules. Each module will be of following dimensions
Each Module’s Weight = 12 Kgs
Each Module’s size : Length x Width x Height = 220 mm x 210 mm x 355 mm
2 Modules can be arranged along the width of vehicle or height in the battery pack.
Required Items inside the Vehicle:-
Li Ion Charging Spot needs to be on the vehicle installed.
Vehicle needs to include
First Aid Box
Mini Fire Extinguisher
Vehicle Charging Point needs to be on vehicle { https://goo.gl/Ngp8KZ , https://goo.gl/5p7buC }
Standard vehicle parts - Front head light {LED headlight}, Front Indicator, Tail Lights, Rear Indicator, brake pedal.
Accelerator in the conventional 3 wheeler are along the handle.
Stealth Startup Needs a 3D Image and Model Version of our Logo Character
Our company "Avalon Holographics" is developing holographic display technology. We've already got a logo, but we'd like to get some 3D modeled versions of the logo character (head) made for several purposes:
1. Use as a splash screen for the product (which uses 3D models from engines like Unreal already)
2. Use as a graphic in promotional materials
3. Create objects (via 3D printer or manufacturer) for demo and promotion
Ideally, we'd like both a static model and one where the guy's hair is on "fire" and moving/waving (animation).
The core themes we worked with for the original logo and continue to want to follow are: open, inquisitive, playfulness, intensity
I've attached several variations on our logo as the basis for the design and colours, and we're open to creativity. There's also a graphic from the website (www.avalonholographics.com) that maybe helps convey the themes.
ETEC
Buyer