Design the coolest penis ringsBlind
in
3D Modeling Design
held by
Mike Lozada
Last seen:
2014-09-29 12:18:46
Contest Ended, Winner(s) have been selected.
Description:
We already have a successful line of vibrating penis rings, to get an idea visit www.ovo.de/en/category/rings.The new line will be different, though, ovo is a line created with a white, clean, mainstream concept, the new line will be branded LooP.
"LooP Maximum Performance"will be inspired in sports and concept cars, men worldwide appeal very well to sports cars and performance is always related to them, therefore, sexual performance can be inspired in sports cars.
Designers need to take the following into account:
1. Vibrating penis rings must meet their promise, they deliver orgasms by stimulating both, men and women during intercourse, designers must think of the ergonomics of sex, the ring constrains the flow of blood to the penis but the part that holds the motor serves a double purpose, it indirectly stimulates men and directly stimulates the clitoris, so successful designs must consider an elevation of the part that holds the motor.
2. I envision these rings as a fusion between the ring and a sports car, the front of the "car" is the ring and the hood holds the motor, the elevation that will get in contact with the clitoris is the "windshield" and the hood, the vibration from the motor will diffuse to the "windshield" and the "hood" the back of the ring is just pure design.
2. The material is medical grade silicone as it is stretchy and tissue safe, this also means the following constrains: Silicone is matt finished, attaining a glossy color is somewhat difficult but not impossible, there should not be too many elements in the ring as these rings perform in a "wet" environment, bacteria can get inside the joints of different layers.
3. I want 16 different rings, each of them inspired in a sports or concept car, we will have suggestive names for them like "Loop Stealth", "LooP M3", "LooP Viper", etc.
Finally, Have fun, I think it's an amazing project!!
PS. Attached is our number one selling penis ring from the current line, that will give you an idea on size, weight and motor positioning.
Also, I have attached a preliminary logo, the symbol you see is the celtic symbol of virility which could nicely be used in the rings the same way sports car have a symbol on the hood.
Wants:
Entries will be evaluated on uniqueness, functionality and killer design.
Don't Wants:
I don't want vulgar or boring stuff...
Ask for Sample:
Yes!
Software:
- AutoCAD
Additional Information
I have so far seen interesting designs from freelancers, in order to guide you a little further and spark your creativity, please note rings marked A1, A2 and A3 in our ovo line at www.ovo.de/en/category/ringsAlso please note our BEST SELLER worldwide currently is B7 red color.
For LooP brand we want colors and wild designs maintaining the ergonomics of sex.
I am uploading images of concept cars that can easily be adapted to a ring with a little bit of imagination.
Entries
#22 RING V6 - Tron edition
by Luka B.
This is a design where I also incorporated LED lights (seen on the hood and on the location of actual car lights). The design is based on the movie Tron Legacy, where everything is very futuristic. The hood has 3 additional bumps for better clitoris stimulation. In my next design (which wiill be posted later today or tomorrow morning) I will try to use your concave idea. What do you think about this design? Regards
Sep 18, 2014 10:41
#49 Football ring
by PETER LAKATOS
One entry that is simple and resembles a american football.
I will try to submit more in the time left, usually the contest after it ends still allows entries to be submitted until a winner is chosen. I wish i had more time to work on this contest. I hope you will find the designer you need.
As a tip: cadcrowd can extend the time of the contest, if the buyer wishes to do that and if you find more designs you like, cad crowd can probably help you get those models too, if you get in touch with the administrators. Best of luck
Peter
I will try to submit more in the time left, usually the contest after it ends still allows entries to be submitted until a winner is chosen. I wish i had more time to work on this contest. I hope you will find the designer you need.
As a tip: cadcrowd can extend the time of the contest, if the buyer wishes to do that and if you find more designs you like, cad crowd can probably help you get those models too, if you get in touch with the administrators. Best of luck
Peter
Sep 26, 2014 7:23
#47 p ring 6 the dream car
by vinya
Hi! Mike
I have attached files for penis ring here ; this ring has nice sleek car body
I liked this model especially the hood looks sexy , it looks car from all the angle
But from front it looks like cobra snake so its got two looks and there are No
Sharp deep joint which may catch bacteria. there are pdf and jpeg files to check
The curves and all other files. Let me know if there is anything
Thanks,
vinya
I have attached files for penis ring here ; this ring has nice sleek car body
I liked this model especially the hood looks sexy , it looks car from all the angle
But from front it looks like cobra snake so its got two looks and there are No
Sharp deep joint which may catch bacteria. there are pdf and jpeg files to check
The curves and all other files. Let me know if there is anything
Thanks,
vinya
Sep 25, 2014 6:39
#26 ring_pen_e
by abhishek suchak
This design is based on sports car rims. upper golden button is the button for motor. green dots are LED lights (optional) which will make stunning performance at nights. lights will start at the starting of motor. motor will be put inside the rim small rods openly (in hollow portion between two inner drum and outer drum). motor will not be visible generally because of very small distance between the rods.
Sep 18, 2014 16:49
#25 ring_pen-c1 (improved)
by abhishek suchak
@buyer: this is the improved version of ring_pen-c . after working on the comfort zone factor i had made some modifications as per your suggestion . i tried to maintain its aerodynamic shape and small designs which will surely improve its stunning look and pleasure in sex.please find the screen shots for more clarity.
Sep 18, 2014 16:39
#17 Veyron
by Tinkerwrench
Veyron inspired design, ring has same circumference as a 1.25 inch circle and will deform easily if made from silicone. I think the width is a bit much, but this matches the Bugatti Veyron hood aspect ratio when viewed from the front. Currently working on 2015 Viper design (adjusting hood scoop designs to not be too rough), and a Lambo Egoista inspired design. Also, would you be interested in ideas for overmolded parts that would concentrate vibration more directly to different areas?
Sep 16, 2014 23:55
#13 Loop Eros
by Josh
Eros takes intimacy to the next level with a clever construction, optimized for pleasure. When the blue button is pressed, Eros awakens unleashing a world of bliss. Three different settings vibrate with varying intensities while a raised upper contour maintains contact with the clitoris and an elongated body ensures maximum stimulation for him. An angled elliptical orifice secure Eros right behind the tip of the penis so the last thing you have to worry about is it flying across the room. Have fun!
Let me know what you think!
Let me know what you think!
Sep 16, 2014 2:34
#19 RING V4
by Luka B.
Hey this is my fourth entry, this time I changed the orientation (hopefully the right way), I know where I would put the LEDs, but first I would like to know if this orientation and principle works fine for you, then I would focus on the LEDs. This is just a prototype, it needs some additional work...Regards
Sep 17, 2014 10:55
Discussion
Hey Mike, please look at the message I've sent to you in order to clarify some basic information.
@Mike Lozada: i had made modifications as per your suggestions in design
and
. i had tried to resolve this issue of uncomfortability during the intercourse with out making the major changes in aesthetics. please provide me your opinion on design
,
,
.





Dear designers, please bear in mind a very important factor: these rings perform during sex, women and men are as close as it gets during intercourse, therefore, rings MUST be comfortable, before you conceive a design you need to ask yourselves: is this going to hurt? will it look scary? Rings must be OUCHLESS
@abhishek suchak: I find your designs truly innovative, I am a little concern about the comfort during use, for example, your design marked as A looks unique but the lower part with the arrows can be pretty uncomfortable for women and the top part holding the motor has a rough edge where there should be something smooth, this is the part that stimulates the clitoris. Design marked as C has an interesting proposal as clit stimulator but the opposite part has a "thorn", both, men and women would think that will hurt. Design C is very cool and aerodynamic but the ring looks square where it should be round.
@buyer: in design
you can use it in both direction. one it is shown in screen shot and another will be button will be in bottom !

@Albertus Putra: sorry for the late reply, you can refer to any concept car you can find, the limit is your imagination. Super cool designs can have interchangeable parts for different stimulation, cool ways of recharging the motor, mixtures of colors, etc.
nope, you can win with one if it's better than the rest, I do offer to hire the winner as our head designer for the entire collection that will be 16 rings.
So, to win this contest one has to put 16 different designs?
Can you tell us which sport cars that you like?
More specific information is better to pull up countless ideas of the designers
More specific information is better to pull up countless ideas of the designers
Thanks for the tip, I browsed the options and could not find a way to make it blind, can you help?
This is an Idea-concept-brainstorming-talent contest, perhaps making it BLIND is a good idea ( p.s.: currently for blind contests the thumbnail preview of the contest in the open contests lists is the image of the last entry,... and it is revealing enough sometimes... ) Thank you
Note to freelancers: Please keep entry images family friendly. Any images that don't fit this criteria can be uploaded with submissions as an attachment.
Similar Contests on Cad Crowd
Enclosure design for a building automation product
Our company is looking for enclosure designs for a set of 3 PCB modules which can connect together to form one single product. Our chosen manufacturer uses folded plastic sheet, although design ideas do not need to be limited to this process.
The main board can feature as a standalone product but in many cases will be connected with the HV and I/O submodule boards, in which case they need to form a single product. There should be a lock-in mechanism on the side panels of the main enclosure to allow connection with HV board and I/O board. The Main board will have an LED panel illuminating the company logo (which will change colours based on the product status). Each individual enclosure should be DIN rail mountable. The top and bottom inputs and outputs modules on each board should be exposed so that appropriate connections can be made without opening the box. The way the three modules assemble together into one product should be similar to this:
http://sie.ag/1E7emGo
Beyond the technical specifications we are looking for a fresh design to take away the feel of an industrial product and make this looks more like a consumer product. We are looking for something sleek and fresh with the look and feel of a quality product.
Hotel Butler Robot
I am looking for an industrial design of a hotel butler robot with manufacturing specification. I would like an interchangeable face module - 1 with the mascot as the face, another with a screen as the face.
Additionally the robot needs to have an interchangeable stand to make it taller like the Double ipad stand.
http://www.doublerobotics.com/
Here are some of the specs the robot needs to possess so you can factor it into the design:
Size: 56 x 35 x 35 cm
Weight: 5-8kg with the majority of the weight at the bottom of the robot
Exterior Components:
• Rechargeable battery pad/station
Interchangeable Modules:
• Butler face head
• Screen face head
• Stand (Double Like) to extend height http://www.doublerobotics.com/
Internal Component:
• 1080HD w night vision camera
• 2W speaker with 22mm diaphragm
• 1 microphone
• 1HDMI output
• 1USB output
• 1SD card slot
• Range finder sensors
• Ground detection sensors
• Object Detection sensors
• 4 motors feedback control
• Head rotation 2 Axes: 1st +/- 90°, 2nd +80°/-60°
• Base Movement 360° (2 drive wheels, 3rd support wheel)
• Electrical Rechargeable Battery
• Wifi & SIM Card
Deliverable:
1) Butler Robot looking mostly like the attached mascot with an interchangeable screen module and rechargeable pad design
2) Adjustable height stand – see Double for reference
3) Video showing its movement and interchangeable module in order to show to the client
4) Manufacturing specifications
Circular LED light with stand
Slimline ring light
light weight stand
Easy to move around
bracket for phone/device
must be able to be broken down into bag
Light control dimmer - similar to that of the GLAMCOR LIGHT (warm and cool functions)
Achilles
Create a new Innovative and High-Tech Design for a Seated Calf Raise Machine. (Gym equipment)
Do Covid in Style: Innovative New Copper Masks to Stay Safe and Look Great!
High level, I would like to produce Covid Masks from a Hemp fabric that are fashionable, with a Copper Mesh as the breathing apparatus. The copper can be the entire face plate or just the mouth and/or nose.
The mask has to be very comfortable and easy to wear and to clean/wash.
Copper has many anti bacterial/anti virus benefits, and many cooling benefits. Hemp fabric also has cooling benefits. The Copper needs to be a type of mesh so it is easy to breathe in and out (vs. through the fabric, which creates heat).
The copper component needs to be breathable (small holes through the mesh) or some other approach.
One challenge is breathing out air into a mask creates Heat. A HUGE innovation would be if there are way to Cool the Mask (w water, a fan, etc) -- anything to keep the person wearing the mask cool.
These products will significantly improve health outcomes. In addition, they will be positioned as fashion statements -- so the Cool factor is very important.
parth_mech
Designer