Description:Slimline ring light
light weight stand
Easy to move around
bracket for phone/device
must be able to be broken down into bag
Light control dimmer - similar to that of the GLAMCOR LIGHT (warm and cool functions)
Wants:Looking for a light that is suitable for a salon environment, photo shoots and makeup
Don't Wants:The bottom of the stand to be too large - easy to walk around to avoid knocking light over etc.
#3 LED lamp by Morne28
Similar Contests on Cad Crowd
Hotel Butler Robot
I am looking for an industrial design of a hotel butler robot with manufacturing specification. I would like an interchangeable face module - 1 with the mascot as the face, another with a screen as the face. Additionally the robot needs to have an interchangeable stand to make it taller like the Double ipad stand. http://www.doublerobotics.com/ Here are some of the specs the robot needs to possess so you can factor it into the design: Size: 56 x 35 x 35 cm Weight: 5-8kg with the majority of the weight at the bottom of the robot Exterior Components: • Rechargeable battery pad/station Interchangeable Modules: • Butler face head • Screen face head • Stand (Double Like) to extend height http://www.doublerobotics.com/ Internal Component: • 1080HD w night vision camera • 2W speaker with 22mm diaphragm • 1 microphone • 1HDMI output • 1USB output • 1SD card slot • Range finder sensors • Ground detection sensors • Object Detection sensors • 4 motors feedback control • Head rotation 2 Axes: 1st +/- 90°, 2nd +80°/-60° • Base Movement 360° (2 drive wheels, 3rd support wheel) • Electrical Rechargeable Battery • Wifi & SIM Card Deliverable: 1) Butler Robot looking mostly like the attached mascot with an interchangeable screen module and rechargeable pad design 2) Adjustable height stand – see Double for reference 3) Video showing its movement and interchangeable module in order to show to the client 4) Manufacturing specifications
Design the coolest penis rings
We already have a successful line of vibrating penis rings, to get an idea visit http://www.ovo.de/en/category/rings. The new line will be different, though, ovo is a line created with a white, clean, mainstream concept, the new line will be branded LooP. "LooP Maximum Performance"will be inspired in sports and concept cars, men worldwide appeal very well to sports cars and performance is always related to them, therefore, sexual performance can be inspired in sports cars. Designers need to take the following into account: 1. Vibrating penis rings must meet their promise, they deliver orgasms by stimulating both, men and women during intercourse, designers must think of the ergonomics of sex, the ring constrains the flow of blood to the penis but the part that holds the motor serves a double purpose, it indirectly stimulates men and directly stimulates the clitoris, so successful designs must consider an elevation of the part that holds the motor. 2. I envision these rings as a fusion between the ring and a sports car, the front of the "car" is the ring and the hood holds the motor, the elevation that will get in contact with the clitoris is the "windshield" and the hood, the vibration from the motor will diffuse to the "windshield" and the "hood" the back of the ring is just pure design. 2. The material is medical grade silicone as it is stretchy and tissue safe, this also means the following constrains: Silicone is matt finished, attaining a glossy color is somewhat difficult but not impossible, there should not be too many elements in the ring as these rings perform in a "wet" environment, bacteria can get inside the joints of different layers. 3. I want 16 different rings, each of them inspired in a sports or concept car, we will have suggestive names for them like "Loop Stealth", "LooP M3", "LooP Viper", etc. Finally, Have fun, I think it's an amazing project!! PS. Attached is our number one selling penis ring from the current line, that will give you an idea on size, weight and motor positioning. Also, I have attached a preliminary logo, the symbol you see is the celtic symbol of virility which could nicely be used in the rings the same way sports car have a symbol on the hood.
Enclosure design for a building automation product
Our company is looking for enclosure designs for a set of 3 PCB modules which can connect together to form one single product. Our chosen manufacturer uses folded plastic sheet, although design ideas do not need to be limited to this process. The main board can feature as a standalone product but in many cases will be connected with the HV and I/O submodule boards, in which case they need to form a single product. There should be a lock-in mechanism on the side panels of the main enclosure to allow connection with HV board and I/O board. The Main board will have an LED panel illuminating the company logo (which will change colours based on the product status). Each individual enclosure should be DIN rail mountable. The top and bottom inputs and outputs modules on each board should be exposed so that appropriate connections can be made without opening the box. The way the three modules assemble together into one product should be similar to this: http://sie.ag/1E7emGo Beyond the technical specifications we are looking for a fresh design to take away the feel of an industrial product and make this looks more like a consumer product. We are looking for something sleek and fresh with the look and feel of a quality product.
Customizable Headphone Design
We want a customizable headphone design for our new product line. It represents the ability to customize based on likes of people. We would like the following files - High Quality Renderings - STL file that is 3D printable - Dimensions in pdf file Description: Type: Switchable caps and switchable cushion headphone Target Audience: 15-35 year old Competitors: Enclosed for reference Design: Switchable headphone caps (please refer to the enclosed switchable caps picture), 90° swivel earcups, On ear and over-ear switchable ear cushions (refer to enclosed switchable ear cushions picture), extendable, foldable headphone Material: Plastic Specification Details: Driver Unit: 40mm Connectivity: Bluetooth LED Indicators to show battery, Power button with light indicators, One multi-function button, Volume button/s (But not limited to your design, please feel free to be creative) Headband: Width- 22-28mm, Length- 30cm unexpended, 38cm extended length, Material: Soft Cushion Earcup length/ size of the earcup: 6-8 cm x 6-8 cm x within 3.5cm thickness/ 6-8 diameter Size range of Over the ear module including cushions: L75-90 mm x H75-90 mm x W25-33 mm Size range of On the ear module including cushions: L50-75 mm x H50-75 mm x W20-28 mm We would just like 3D printable ID design, and we will take care of mechanical design by ourselves. Any software is acceptable, if STL format file can be provided. Any further questions, please feel free to comment.
Stealth Startup Needs a 3D Image and Model Version of our Logo Character
Our company "Avalon Holographics" is developing holographic display technology. We've already got a logo, but we'd like to get some 3D modeled versions of the logo character (head) made for several purposes: 1. Use as a splash screen for the product (which uses 3D models from engines like Unreal already) 2. Use as a graphic in promotional materials 3. Create objects (via 3D printer or manufacturer) for demo and promotion Ideally, we'd like both a static model and one where the guy's hair is on "fire" and moving/waving (animation). The core themes we worked with for the original logo and continue to want to follow are: open, inquisitive, playfulness, intensity I've attached several variations on our logo as the basis for the design and colours, and we're open to creativity. There's also a graphic from the website (www.avalonholographics.com) that maybe helps convey the themes.