As-Built Freelance Design & Engineering Services

If you are interested in using the ultimate As-Built services, you have come to the right place. Cad Crowd is here to connect every client with freelance As-Built experts capable of creating the best design for your new structure. Every designer at Cad Crowd has been screened and checked and they are also pre-trained and pre-qualified. This gives us the confidence that our designers will meet your expectations and help you with your project’s needs and requirements. Eliminate all the dilemmas you may have about hiring online and start working with reputable, professional As-Built freelancers from Cad Crowd.

As-Built drawings, surveying, and drafting can be described in many different ways. The simplest definition describes As-Built drawings as revised set of drawing filed by contractors after finishing a specific task or after finishing a project. These documents mirror all the changes that have been made in the specs and working drawings that happened while the construction process was still on. With their help people can see the exact geometry, dimensions and location of all parts of the work finished under the contract. As-Built drawings are known as record drawings, measured drawings or simply  As-Builts.

It is not unusual to make some changes on a building project during construction. This is quite natural, as no one can predict what kind of circumstances will emerge during on site. Sometimes these changes are small and even insignificant, but in other cases, they are very important and radical. This is the reason why many clients ask for as-built drawings while the construction process is still on or when the task is completely finished. They want to know more about the changes that were made in the initial plan. In most cases, the contractor will mark up these changes with red ink and these drawings are used by the consultant team to make record drawings. This is what as-built drawings are all about. 

As-built drawings are kept during all the stages of a construction project. It is the construction coordinator’s obligation to make sure that these drawings are maintained. The as-built drawings are documents that are presented to the client for approval after the construction job is finished.

Our designers will work with your through the whole design process and help you with the as-built drawings from the starting analysis to the final files. Construction projects are complex and the changes we have mentioned may include some complex activities, but our designers will help you get the job done without any problems. 

 Cad Crowd has a community of thousands of freelance engineers, CAD designers, and other experts from all over the world. We will be glad to connect you with the best freelancers at a reasonable price. Send us your project description for a free quote. We'll analyze your requirements and connect you directly with a top-tier design freelancer. You won't find the same breadth of expertise from other CAD design companies! Speed up your project by hiring a Cad Crowd professional.

Member Since: 2015-02-21
I can create anything from sketching to fully rendered 3D models.
253 points
Member Since: 2015-06-15
Steel structure Designer by ISOTEC Karachi Project work CEMENT MILL 70 TPH Scope of work Falcon Cement All Steel Structure Designing and provided by Design Calculation(Staad Pro), Fabrication Drawings & Bill of Quantity. Supporting Steel Structure by: 1. Belt Conveyors. 2. Weigh feeders. 3. Transfer Stations. 4. Air slides. 5. Classifier. 6. Screw conveyors. 7. Bag Filters. & Fans. 8. Bucket Elevators. 9. Cyclone inlet, outlet ducts Classifier inlet, outlet ducts. 10. Stairs.
15 points
Member Since: 2017-01-13
I/we "make forms a functional part of life". With Ideation, I/we will formulate your ideas and concepts. I/we design, develop, consult, and/or market.
10 points
Member Since: 2017-02-17
I have full experienced in construction developing drawings and site supervision. I worked almost 18 years with full knowledge on AutoCAD/ CAD and Revit and other Engineering software that develop drawings. I’ve been in so many projects locally and internationally, worked also on a big company with full used of International standards. With my knowledge I can accomplished and coordinate projects and assist people where I can share my knowledge on standards to make projects well and done. I also have the initiative to work and make decisions on constraint condition having my positive attitude and a thrive in pressure situation.
10 points
Member Since: 2015-11-13
My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic and control narratives for coke drum sequence control system, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system - SAUDI ELASTOMER PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic, cause and effect, control and safeguarding narratives of the whole EPC project, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system as a SENIOR INSTRUMENT & CONTROL ENGINEER - SOUTH PARS PHASEs (Phase 12, Phase 17 and 18) as an INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT: o Responsibilities: Principal detail design work for several related Demin water, waste water and polishing water units as a INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT. My skills can be summarized as in developing required detail instrument and control documents for EPC projects (Control narratives, C&E, S.G. Narrative, Logic, Index, Cable routing, etc., package or detail design review, design leadership and highly qualified in working with Autocad, and M.S. Office, programming and etc. The key strengths and achievement that I possess for success which make me very competitive candidate for the above position are as follows: • Receiving Award of Excellence of Year 2014 as the best instrument engineer in a reputable EPC Company, due to EPC project cost saving of more than 5,000,000 USD. • Leading package design works for more than 39 packages for SAUDI Elastomer project and more than 20 packages for OMAN SRIP project. Those packages include Utility boilers and water, air and oil utilities, several gas and air reciprocating and centrifugal compressors and etc. • Leading the design work for the Vibration monitoring and condition monitoring system of above projects • Developing the control and safeguarding narrative and logic works of SEP project (SAUDI Elastomer Project) • Leading the instrument database works for above projects • Being involved in various turbine control scenarios and I believe myself as a turbine control specialist. • Promotion from principal to senior to lead instrument engineer and finally to vice of deputy of engineering management in a process package vendor company within short period of time due to the high technical and leading skills • Leading detail design works of packages in vendor companies with variety of abilities including detail design, PLC programming and etc. • Leading and also carrying out the detail design, procurement and some parts of the constructions steps of more than four EPC process and utility units in Oil and Gas Industries worldwide as a vendor package detail designer and reviewer. • My strong analytical and forward looker mind, punctuality, perseverance, excellence and development seeking characters have led to more accurate, efficient and cost saving designs • Cost effectiveness along with better efficiency is one of the aims is being sought and I believe that engineering is a trade-off between the cost and the efficient design With a BS degree in Instrument and Control Engineering, I have a very good knowledge of process control and instrumentation, high leadership potential and energy levels, very strong analytical mind and deep detail-oriented skills, multitask handling abilities, responsible, creative and strong technical experience, very motive, super active and highly efficient and all this is owing to my educational backgrounds and absolutely my past experience in research then in detail design, then design review of small to enormous EPC project as well as conducting detail design leadership as a senior instrument and control engineer. Attached, you can find my resume for your kind consideration. I can be reached anytime via email at or my cell phone, +1-830-309-0843
6 points
AC Behera
Member Since: 2015-02-24
Name: Ananda Chandra Behera Father's Name: Late Bhairab Charan Behera D.O.B. 1964-04-12 Religion: Hinduism Nationality: Indian Marital Status: Married Work Experience: 20 yrs. Organizations Worked with: VATech, VAI India Pvt Ltd, SIEMENS_VAI, Siemens Ltd. Designations: CAD Engineer/Design Engineer/Design Executive
5 points
Member Since: 2015-09-05
Over 20 years of AutoCAD experience. Proficient with AutoCAD and Plant3D. Available to do the following: - P&ID's - Piping Isometrics - As-built Piping Models - Plans & Sections - Line lists - Tie-in Lists Contact me for any of your CAD needs.
5 points
Member Since: 2015-12-16
Worked as a CAD Technician and Architectural Technician, working on jobs ranging from small private house extensions to £100million+ high tech commercial facilities. I have been using AutoCAD daily for about 8 years, Revit Architecture for 2 years and I have experience using Sketchup, ArchiCAD and Photoshop. I have worked through all stages of design from Surveying existing, conceptual design, planning drawings, tendering, construction drawings, site work checking and approving contractor drawings and as-built drawings. I am currently full time employed but looking to take on additional jobs to improve my experience and develop my knowledge further. Any questions, please feel free to contact me,
5 points
Member Since: 2016-02-01
24 years experience in the Civil Engineering Industry as AutoCAD support and 15 years as a GIS Technician (ArcMap) support.
5 points
Chris Perrott
Member Since: 2016-03-28
I have worked in the oil,gas and process industries for over 40 years as an instrument and controls Designer / Engineer. I have worked on major projects both on and off shore. I have also worked for small companies designing an manufacturing electrical switchgear and control panels from design concept to installation and commissioning. I have used Smartplant Instrumentation, Solidworks 3D. Auto cad and Microsoft Office software systems to develop and design design and engineering documentation.
5 points