BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality:... Read more

BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality: BMEC has a no-compromise approach to quality and safety. Ethical, elegant engineering is the cornerstone of our business. BMEC's multidisciplinary team specialises in using the latest technologies and manufacturing methods to provide insightful solutions quickly and affordably Time: Our dedicated team coupled with our partner-network of suppliers means we can guarantee the shortest development time. Cost: Our professional design and manufacturing services are highly competitive. Scope: Our experienced team is here to help you find balanced solutions that fit your budget and your timeline.

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie... Read more

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory... Read more

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and becom... Read more

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and become a fully integrated partner in your development project. Project Engineering Our involvement is entirely centered around the clients requirements. We are able to handle the product from start to finish Reverse Engineering Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. One type of reverse engineering involves producing 3-D images of manufactured parts when a blueprint is not available in order to re-manufacture the part. Re-Engineering Re-engineering of the existing engineered components and systems. Modifications of the existing design are done in order to enhance the look & feel, improve material usage and productivity.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I am a highly experienced and innovative product manufacturer and designer, dedicated to delivering exceptional results in 3D design using Rhino 3D and CAD software. With a passion for classic car re... Read more

I am a highly experienced and innovative product manufacturer and designer, dedicated to delivering exceptional results in 3D design using Rhino 3D and CAD software. With a passion for classic car rebuilds and automotive components, I also specialize in cutting-edge 3D printing and advanced composite material fabrication. My expertise in Rhino 8 allows me to excel in 3D design, drafting, 3D scanning, mold creation, and component manufacturing. I proficiently utilize epoxy systems, carbon fiber, glass fiber, and other materials to create high-quality components that stand out for their mechanical functionality and visual appeal. Furthermore, my hands-on skills in finishing and spray painting ensure that every product meets the highest standards of quality, combining outstanding form with flawless function.

I am a Chemical Process Engineer with broad experience across industrial chemical manufacturing, mineral processing, metallurgy, and pharmaceutical design. I have led multidisciplinary teams through t... Read more

I am a Chemical Process Engineer with broad experience across industrial chemical manufacturing, mineral processing, metallurgy, and pharmaceutical design. I have led multidisciplinary teams through the successful design, construction, and commissioning of multiple processing plants.

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast... Read more

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast industry. Everything I design I try to make aesthetically pleasing, practical and mechanically strong enough for the job!

I love working with architectural designs, civil engineering and mechanical designs. I matriculated from Wynberg Boys High School in Cape Town and got a distinction for Engineering graphics and design... Read more

I love working with architectural designs, civil engineering and mechanical designs. I matriculated from Wynberg Boys High School in Cape Town and got a distinction for Engineering graphics and design.

I am a fully qualified draughtsman with an international qualification based in South Africa. I have over 10 years experience in drafting covering multiple disciplines. I work mainly in Solidworks and... Read more

I am a fully qualified draughtsman with an international qualification based in South Africa. I have over 10 years experience in drafting covering multiple disciplines. I work mainly in Solidworks and AutoCAD and am currently specializing in mechanical engineering, design and R&D. I have been in mechanical drafting for the last 6 years. I have experience in architectural and electrical drafting as well.

I'm a design draftsman with deep experience across the drawing office, specialising in PCB layout and 3D mechanical CAD. Most of my career has been spent translating engineering intent into clean, man... Read more

I'm a design draftsman with deep experience across the drawing office, specialising in PCB layout and 3D mechanical CAD. Most of my career has been spent translating engineering intent into clean, manufacturable drawings — board layouts, mechanical detail, assembly documentation, and the full data packages that fabricators and assembly houses actually need to build from. On the electronics side I've laid out multilayer boards up to 16 layers, including RF, high-speed digital, and analog work for GPS/GSM tracking units, high-resolution camera systems, and satellite hardware. On the mechanical side I produce 3D models, enclosures, and detailed production drawings. I work fluently in Altium Designer, P-CAD, CAM350, AutoCAD, and SolidWorks. What I bring to a project is a draftsman's discipline: accurate, complete, manufacturing-ready documentation, with a strong eye for design-for-manufacture so problems get caught on the drawing board, not on the production line.

Murdoch Tough (MT) MEP Design & Consulting Specialist offers expert MEP design and consulting services with a strong focus on electrical engineering, renewable energy systems, and building services. W... Read more

Murdoch Tough (MT) MEP Design & Consulting Specialist offers expert MEP design and consulting services with a strong focus on electrical engineering, renewable energy systems, and building services. With over two years of experience, we specialize in electrical load management, solar PV system integration, BESS solutions, and system optimization. Our expertise extends to MEP procurement, equipment setup, installation, and designing systems such as STP and WTP. We take pride in delivering precise, efficient designs that meet both budgetary and technical requirements, with an emphasis on sustainability and reliability. Let’s collaborate to optimize your next project and ensure it’s future-ready!

Drafting to scale ,corrected scale, can drart any thin, place coordinate. Can draft from scratch. Can draft big or small, easy to tuff copies.

Drafting to scale ,corrected scale, can drart any thin, place coordinate. Can draft from scratch. Can draft big or small, easy to tuff copies.

3D CAD designer with over 10 years experience in product design and development, injection/ blow mould design, mechanical design and sheet metal design.

3D CAD designer with over 10 years experience in product design and development, injection/ blow mould design, mechanical design and sheet metal design.

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an appro... Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an approach in hand drawn sketching and illustration skills. I’m very experienced with CAD programs such as Revit Architecture, Sketch-up, Zbrush, Substance Painter & Designer, Megascane, Solidworks, 3ds Max, Keyshot & Vray

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3... Read more

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.

Freshly graduated from one of the top French Engineering School, I moved in South Africa in order to work in a local company, Finite Element Analysis Services. FEAS is the first consulting company... Read more

Freshly graduated from one of the top French Engineering School, I moved in South Africa in order to work in a local company, Finite Element Analysis Services. FEAS is the first consulting company that provides Abaqus analyses in South Africa and is the only Abaqus retailer throughout all Africa. The experience of the team of engineers I am working with is a solid backup.

Experienced Computer Engineer with expertise in software development, embedded systems, IoT, electronic systems, systems analysis, entrepreneurs and AI integration. Skilled in building interactive sol... Read more

Experienced Computer Engineer with expertise in software development, embedded systems, IoT, electronic systems, systems analysis, entrepreneurs and AI integration. Skilled in building interactive solutions that enhance learning and user engagement, with proficiency in C, Java, HTML5, CSS, JavaScript, GNS3, and WebGL. Known for a strong technical foundation and a creative approach to complex challenges, particularly in educational platforms, AI integration, and gamified experiences. Committed to continuous learning and leveraging new technologies. Fluent in English, French, and Swahili.

Experienced Mechanical Design Engineer skilled in CAD modeling and project management, with a proven track record in bespoke interior design, structural design, and construction management. Proficient... Read more

Experienced Mechanical Design Engineer skilled in CAD modeling and project management, with a proven track record in bespoke interior design, structural design, and construction management. Proficient in Autodesk Inventor, Revit, and skilled in project management tools, I excel in problem-solving and thrive both independently and collaboratively. Possessing strong communication skills and attention to detail, I am motivated to contribute innovative solutions to engineering challenges.

I'm a SolidWorks user with 14+ years of experience, specializing in advanced surfacing techniques for consumer products, automotive components, composite part and mould design. Whether you're an indu... Read more

I'm a SolidWorks user with 14+ years of experience, specializing in advanced surfacing techniques for consumer products, automotive components, composite part and mould design. Whether you're an industrial designer with a vision, a startup building a prototype, or a manufacturer prepping for composite molding—I've got you covered. Services Offered: - Class-A surface modeling - Organic shapes and ergonomic forms - Reverse Engineering - Spline-driven surface development Conversion of rough or imported geometry to clean, manufacturable models Industries Served: - Industrial/product design - Automotive (panels, housings, concept parts) - Medical and wearable devices - 3D printing & prototyping Deliverables: - SolidWorks (SLDPRT/SLDASM) - STEP, IGES, STL, or native files

Hi there! I'm a qualified Mechanical Engineering Technologist (BTech Mechanical Engineering) with hands-on experience in Wet Services & HVAC Draughting, and Energy Efficiency Compliance. 💻 What I Of... Read more

Hi there! I'm a qualified Mechanical Engineering Technologist (BTech Mechanical Engineering) with hands-on experience in Wet Services & HVAC Draughting, and Energy Efficiency Compliance. 💻 What I Offer (Freelance Services): 🔹 Draughting using AutoCAD or Revit MEP – specialising in wet services layouts for residential, commercial, and industrial projects. 🔹 SANS 10400 XA Compliance  ✔️ Deemed-to-Satisfy Calculations (Fenestration)  ✔️ Rational Design using DesignBuilder (Energy Modeling & Reporting) 📌 I work professionally, meet deadlines, and communicate clearly. 📍Based in South Africa | 🌐 Remote Work Available 💬 Let's collaborate! Whether you're a consultant, architect, or contractor, I’m here to support your project needs.

 CAD - Autodesk Inventor, SolidWorks, FreeCAD  General understanding of G-code (CNC machine code)  Microcontroller design  Programming languages – Python, C/C++, C#, Ruby  Wiring diagrams & s... Read more

 CAD - Autodesk Inventor, SolidWorks, FreeCAD  General understanding of G-code (CNC machine code)  Microcontroller design  Programming languages – Python, C/C++, C#, Ruby  Wiring diagrams & schematics - Autodesk AutoCAD Electrical  Circuit & Printed circuit board (PCB) design – KiCAD, Eagle, DipTrace  Operating Systems – Linux (Ubuntu), Microsoft Windows  RF Protocols – WiFi, Bluetooth  Project management - MS Project  Matlab  MS Office  Firm understanding of computers and computer networking

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Art... Read more

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Arts Gallery (AVA) in Cape Town as well as at the University of Johannesburg Art Gallery, in addition to featuring in the Visi Magazine.

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.