Hire Mechanical Engineering Design Designers in United States

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsda... Read more

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsdale, AZ. ► Designed & Engineered WORLD'S most advanced luxury wallet, medical equipment, industrial components, products & more at: ♦VIEW PORTFOLIO & EXHIBIT:♦ w w w . lovesobhani . c o m From napkin-sketch to fully-functional final prototype, he's been there every step of the way. He's designed & engineered entire products (electrical, software & mechanical aspects) for nearly a decade on a contractual basis with prophetic proficiency. This created a multi-specialty Prototype & Design Engineer that is a super talented, professional expert with many intricacies of: ► Product Design & Engineering ► CAD Modeling ► ElectroMechanical Design & Engineering ► Realistic Rendering ► DFM (Design for Manufacture) Techniques ► Component Design ► Circuit & PCB Design ► Product Development & Optimization ♦ FULL PROFESSIONAL EXPERIENCE: ♦

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawing... Read more

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawings, preliminary layouts, P&IDs, and more. My expertise is in rotating equipment, specifically centrifugal pumps, vacuum pumps, and compressors from 1.5 HP (1 kW) to upwards of 1,000 HP (750 kW). I have also had experience in other pneumatic applications as well as office furniture design. I have designed piping runs (including valves, gauges, transmitters, other instrumentation), structural steel frames, gear reducers, V-Belt driven equipment, selected motors, designed for adherence to stringent specifications, and communicate regularly directly with customers. I am finishing my Bachelor's degree in Mechanical Engineering Technology and will continue to pursue my MBA after that. I am offering services in Solidworks 2019 (2D & 3D) and Draftsight (2D) and can save files in any of the supported formats (i.e. .SLDPRT, .SLDASM, .SLDDRW, .STEP, .DWG, etc.) If you are looking for a quick layout, concept, or have a small part that needs to be modeled in 3D I can make that happen. If you need a full blown design with detailed 2D drawings I can make that happen as well. I oversee my projects from start to completion!

I have been using Solidworks since 2015 and have been designing on and off up until 2019. Since 2019 I have been designing full time as a mechanical design engineer. I love the process and hope to wor... Read more

I have been using Solidworks since 2015 and have been designing on and off up until 2019. Since 2019 I have been designing full time as a mechanical design engineer. I love the process and hope to work with you in the future. If you have any questions, feel free to ask!

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

Mechanical design engineer available for part-time contract work. Experienced in product design using numerous CAD software tools, especially SolidWorks and Fusion 360.

Mechanical design engineer available for part-time contract work. Experienced in product design using numerous CAD software tools, especially SolidWorks and Fusion 360.

I am a seasoned mechanical engineer with extensive experience in the design and development of non-standard parts, automated warehouse systems, industrial machinery, and product mechanical structures.... Read more

I am a seasoned mechanical engineer with extensive experience in the design and development of non-standard parts, automated warehouse systems, industrial machinery, and product mechanical structures. Over the years, I have honed my expertise in creating detailed production drawings, CNC laser unfold drawings, and innovative solutions for hydraulic, agricultural, and special-purpose automation machinery. I have a deep understanding of standard part selection and sourcing, and I am well-versed in the complexities of the supply chain, particularly from my ten years of living in China—one of the world's largest spare parts suppliers. I am proficient in a variety of design software, including SolidWorks, AutoCAD, Fusion360, UG NX, and Pro-E. Additionally, I use rendering tools such as KeyShot, Blender, and Rhino to bring designs to life.

• 16 Years of full-time, professional experience as a mechanical engineer. • Proficiency with Onshape, SolidWorks, Creo, and a variety of other 3D CAD programs (Onshape preferred). • Clarkson Universi... Read more

• 16 Years of full-time, professional experience as a mechanical engineer. • Proficiency with Onshape, SolidWorks, Creo, and a variety of other 3D CAD programs (Onshape preferred). • Clarkson University graduate (B.S. Mechanical Engineering, 2009) • Reside in NY State.

I am a Mechanical Engineering student with 8+ years of experience in CAD/3D design. I can create 3D models with accompanying renders, engineering drawings, and technical documentation. I am heavily ex... Read more

I am a Mechanical Engineering student with 8+ years of experience in CAD/3D design. I can create 3D models with accompanying renders, engineering drawings, and technical documentation. I am heavily experienced in various software tools such as Onshape and SolidWorks, where I am a certified CAD Design Associate. Most of my design work is in robotics, UAVs, and automotive parts. I am in expert in rapid engineering prototyping with FDM 3D printing.

My name is Thomas White and I hold a Bachelor of Science in Mechanical Engineering. I grew up in the city of Chico, Ca. A small town approximately 80 miles north of the capital of Sacramento. Growing... Read more

My name is Thomas White and I hold a Bachelor of Science in Mechanical Engineering. I grew up in the city of Chico, Ca. A small town approximately 80 miles north of the capital of Sacramento. Growing up I was always fascinated by the way the world works in both social and scientific ways. I enlisted in the United States Marine Corps right out of high school and explored the world and its many cultures. It was here that I learned the essentials of leadership, and where my decision to walk the path of personal development began. Upon returning home, I set off on a new career path and decided to undertake the challenge of an engineering curriculum. During that time I met many like minded people and garnered a new set of skills, and a tenacity for excellence. As a young aspiring technical professional, I seek to continue to improve myself. I found that Modeling and Simulation is an area that I excel at and use to continually exercise my engineering judgement and find new ways to approach the analysis of a problem. As I traverse down this path of technical enlightenment, I increasingly remind myself of the things that I have learned from my many experiences at home and abroad, and never disrespect the high value of total mission accomplishment.

I am an accomplished 18 year Tool & Die Maker with equal accomplishments in engineering spanning over an additional 15 years. Worked in the design, manufacturing and assembly of plastic injection mold... Read more

I am an accomplished 18 year Tool & Die Maker with equal accomplishments in engineering spanning over an additional 15 years. Worked in the design, manufacturing and assembly of plastic injection molds and machine tooling (new and replacement parts) for companies like Lutron Electronics, Taylor Technologies, Amp Incorporated (now Tyco Electronics), Plasticert and Framatone Connectors from 1989-2003 as a toolmaker and shop supervisor eventually becoming a shop owner with 12 Ft employees. I made the transition to full-time engineering when I worked in product research and development for EdgeCraft Corporation leading the design and development of 2 new products that launched in 2003-2005. Moving closer to home I was hired at Joseph Machine Company where I was challenged with designing modular tooling for their custom SFMC manufacturing machines. This led to a 15% reduction in manufacturing costs and a 30% reduction in design time. I was the lead engineer for the launch of the Quad Head Sash Cleaner in 2006. I took a job in 2007 as an engineer at Manitowoc Cranes in Shady Grove Pa. I was initially a production support engineer eventually working my way into the structures group working on new products and assisted, as needed, in the custom application department where we would design and deliver many different types of customized units per customer specific requirements. When I left after my 10 year tenure I had led an engineering team of 30+ engineers on the launch of 2 new products released to market and was the lead engineer on major custom applications (500+ hour efforts) on over 20 custom machines, many leading to new option offerings on standard products. New products launched include the GCD09 and GCD15. The NTC55 was a new product launched from the result of a special custom application for Stevenson Crane in Harrisburg Pa. Customizations I was in charge of included the entire Industrial Line, most of the National Crane product line and small Grove RT units. After a 3 year stint at HydroWorx International I decided it was time to relaunch my own business and opened All Points Design where I offer mechanical engineering and design services on many types of products.

~ 30+ years experience in Mechanical Engineering and Manufacturing. ~ Design Innovator, 6 Registered Patents. ~ 3D CAD Expert, SolidWorks ~ Proven record of industry changing product development. ~ Ex... Read more

~ 30+ years experience in Mechanical Engineering and Manufacturing. ~ Design Innovator, 6 Registered Patents. ~ 3D CAD Expert, SolidWorks ~ Proven record of industry changing product development. ~ Expert in DFM, Molded Plastics, Cast Metals, Metal Fabrication, Complex Mechanisms, Lean Manufacturing, Quality Control, Electro-Mechanical Integration. ~ Outsourcing, CM Management, Cost Reduction ~ GD&T, Production Drawings, BOMs, ECM ~ Quality and Reliability testing and compliance Management ~ Problem Solving thru extraordinary ingenuity and innovation ~ BS Mechanical Engineering, CalPoly SLO. I am a professional Mechanical Engineer with an extremely successful career in Engineering Design, Engineering Management and Manufacturing. I have taken hundreds of products from concept to mass production. I have taken 3D CAD designs thru the full cycle of vendor sourcing & qualification, RFQ, Tooling, Sampling, Production Planning, Quality Control and Testing Specifications and into mass production manufacturing. My greatest strength is thinking outside the box, finding simple cost effective solutions to complex and difficult problems. I am the idea guy, with a history of developing new concepts and market changing innovation. I have an extraordinary mechanical aptitude.