Hire Electrical Schematics Designers in United States

I learned to draft in high school not knowing I would be able to use drafting skills with CAD. I thoroughly enjoy CAD and have been making drawings every day for many years. My skills are mostly mecha... Read more

I learned to draft in high school not knowing I would be able to use drafting skills with CAD. I thoroughly enjoy CAD and have been making drawings every day for many years. My skills are mostly mechanical, but I also wired Control Panels for several years . I use a close facsimile of ACAD called Bricscad. I have also worked with Solidworks. And of course I have Free Cad / Blender / Paint Dot Net / and Inkscape should the need arise. I enjoy 2D Drafting or 3D Modeling, and yes, I will continue to create, innovative and have fun !! .

I'm a certified CAD designer who enjoys mostly working with the 3D mechanical discipline, and I enjoy designing new things. For a short time while working on my CAD certification, my instructor pick... Read more

I'm a certified CAD designer who enjoys mostly working with the 3D mechanical discipline, and I enjoy designing new things. For a short time while working on my CAD certification, my instructor picked me as one of four potential candidates to intern at a private engineering firm called Power Engineers in the Kansas City area. I was one of the 4 which they selected out of the rest of the class. The process was very enlightening as to what to expect working for a company doing CAD work. Once the internship came to a close, they pretty much offered me a job to work there permanently, although sadly I had to decline due to the long distance I would have to travel each day. I also wanted the freedom to be able to work on a wider variety of parts and products while doing CAD work, and not be stuck doing one thing only, like electrical schematics. While I haven't had a whole lot of on the job experience doing CAD work, I still have a passion for the design aspect and have kept up on practicing designs at home with my own projects. My software of choice (and what I am most familiar with) is Fusion 360. I am familiar, and have worked with other CAD software in the past such as Autocad, Microstation, and Autodesk Inventor. I also have experience working with consumer grade 3D printers.

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

I am an electrical engineer with experience in designing electronic solutions for rugged robotic applications. This includes PCB designs, cable harnesses, motor and feedback selection, and overall sys... Read more

I am an electrical engineer with experience in designing electronic solutions for rugged robotic applications. This includes PCB designs, cable harnesses, motor and feedback selection, and overall system architecture. I also have experience designing mechanical components such as rugged enclosures, heat sinks, etc. My skills span the full design process, from initial concept and requirement generation to final product design and manufacturing.

Providing Engineering Design Drafting, 3d Modeling & Staffing Service Solutions for the New Orleans/Baton Rouge Architecture Engineering & Construction community. Our experience includes extensive... Read more

Providing Engineering Design Drafting, 3d Modeling & Staffing Service Solutions for the New Orleans/Baton Rouge Architecture Engineering & Construction community. Our experience includes extensive engineering skills and experience acquired over nearly twenty years with four years of land surveying experience, and fifteen plus years of design drafting using AutoCad, Civil 3D, Revit, Raster Design, Cadworx Structural and Pro-Engineer, for Architectural, Civil, and Structural design drafting , detailing, & 3D Modeling. Our design experience ranges from Residential/Commercial Development, Structural Steel Detailing, Municipal and Industrial Infrastructure Capital improvements, including Downstream O&G facilities throughout the Southeast region, as well as Bulk Handling and Liquid Transfer Stations on the Lower Mississippi River, Marine Terminal and Wharf Design, and Marine Inspection & Rehabilitation projects worldwide. Additional design experience includes detailing P&ID drawings and electrical schematics; substation design , cable tray drawing and diagrams, Light Rail design and Bridge upgrades for Light Rail, Pulp & Paper Plant Design, Levee/Flood control design, Pump Stations, and a year of site inspection work.

Technical Abilities: • CAD Software: AutoCAD 2017 (electrical and LT), Solidworks. • Programming Software: Horner APC, Rockwell Studio5000, Connected Components Workbench, RSLogix500. • Misc.: Com... Read more

Technical Abilities: • CAD Software: AutoCAD 2017 (electrical and LT), Solidworks. • Programming Software: Horner APC, Rockwell Studio5000, Connected Components Workbench, RSLogix500. • Misc.: Commissioning, Project Management, Preventive Maintenance Program Set-up, Lockout & Tagout Program Set-up, AutoCad Standards Development. Experience: Versatility Services Inc. Brooksville, FL- Clatskanie, OR President/Owner 10/14 to Present www.versatilityservices.com Small independent system integrator • Applied engineering principles to design, modify and develop facilities, testing, machines, equipment and processes used in processing and manufacturing products. • Analyzed equipment specifications and performance requirements to determine designs to be produced by existing manufacturing and processing facilities and methods. • Analyzed engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design. • Determined feasibility of designing new plant equipment and modifying existing facilities, considering costs, available space, time limitations, company planning and other technical and economic factors. • Provided technical information concerning manufacturing and processing techniques, materials, properties and limitations that affected long range plant and product engineering planning. • Studied engineering and technical publications to keep abreast of technological changes and developments in industry. • Program PLC using ladder logic. • Develop HMI screens. • Built custom control panels. • Provided start-up and commissioning services. • Lighting design. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. • Engineer and design PLC based control systems for the industrial market. • Specify instrumentation, estimating, project management, and purchasing. DcR Engineering Services Tampa, FL HT/DcR Engineering Lakeland Senior Electrical Designer 04/05 to 10/14 • Applied engineering principles to design, modify and develop facilities, testing, machines, equipment and processes used in processing and manufacturing products. • Analyzed equipment specifications and performance requirements to determine designs to be produced by existing manufacturing and processing facilities and methods. • Analyzed engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design. • Determined feasibility of designing new plant equipment and modifying existing facilities, considering costs, available space, time limitations, company planning and other technical and economic factors. • Provided technical information concerning manufacturing and processing techniques, materials, properties and limitations that affected long range plant and product engineering planning. • Studied engineering and technical publications to keep abreast of technological changes and developments in industry. • Used computer-assisted engineering software and equipment. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. Engineer and design PLC based control systems for the municipal and industrial market. Specify instrumentation, estimating, project management, and purchasing. Rocha Controls Tampa, FL Electrical Designer 11/00 to 12/04 • Applied engineering principles to design, modify and develop facilities, testing, machines, equipment and processes used in processing and manufacturing products. • Analyzed equipment specifications and performance requirements to determine designs to be produced by existing manufacturing and processing facilities and methods. • Analyzed engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design. • Determined feasibility of designing new plant equipment and modifying existing facilities, considering costs, available space, time limitations, company planning and other technical and economic factors. • Provided technical information concerning manufacturing and processing techniques, materials, properties and limitations that affected long range plant and product engineering planning. • Studied engineering and technical publications to keep abreast of technological changes and developments in industry. • Used computer-assisted engineering software and equipment. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. Engineer and design PLC based control systems for the municipal and industrial market. Specify instrumentation, estimating, project management, and purchasing. Central Power & Lime Brooksville, FL Electrician 02/00 to 11/00 • Repaired and maintained electrical equipment in generating station and powerhouse. • Tested defective equipment to determine cause of malfunctions and failures, using voltmeters, ammeters and related electrical testing apparatus. • Repaired and replaced equipment, such as relays, switches, supervisory controls and indicating and recording instruments. • Tested and repaired switchboard and equipment circuitry, interpreting wiring diagrams to trace and connect numerous wires carrying currents for independent functions. • Cleaned and repaired brushes, commutators, windings and bearings of generators, motors and converters. • Successfully handled converting blueprints to Autocad format. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. Universal Studios Escape Orlando, FL Animation/Show Control Technician 04/99 to 02/00 Troubleshoot, repair, and performed preventative maintenance on various PLC controlled systems including a rollercoater, a stunt show, and a state of the art special effects show. Worked on Allen-Bradley soft start controllers, variable frequency drives, electro-hydraulic and pnuematic equipment. Schenctady International Inc. Schenectady, NY Electrician 03/95 to 03/99 • Installed and repaired electrical systems, apparatuses and electrical and electronic components of industrial machinery and equipment. • Installed power supply wiring and conduit for newly installed machines and equipment, such as robots, conveyors and programmable controllers. • Connected power supply wires to machines and equipment and connected cables and wires between machines and equipment. • Diagnosed malfunctioning apparatuses, such as transformers, motors and lighting fixtures, using test equipment. • Tested malfunctioning machinery and discussed malfunctions with other maintenance workers. • Visually inspected and listened to machines and equipment to locate causes of malfunctions. • Dismantled machines and equipment to gain access to problem areas. • Replaced faulty electrical components of machine, such as relays, switches and motors and positioned sensing devices. • Planned layout of wiring and installed wiring, conduit and electrical apparatuses in buildings.

https://www.▒▒▒▒▒▒.com/freelancers/~01f3b786d9eaae6d35/

https://www.▒▒▒▒▒▒.com/freelancers/~01f3b786d9eaae6d35/

I currently do water and wastewater EI&C design and drafting. My strengths are in PLC panel design, power distribution and P&ID's. I am good with drafting electrical site plans, conduit and conductor... Read more

I currently do water and wastewater EI&C design and drafting. My strengths are in PLC panel design, power distribution and P&ID's. I am good with drafting electrical site plans, conduit and conductor schedules, motor control schematics, and one line diagrams.

I've been doing 2D and 3D design work since 2009. I have experience in a wide variety of fields, such as architectural, mechanical, electrical, and many more. I primarily work with Autodesk Inventor... Read more

I've been doing 2D and 3D design work since 2009. I have experience in a wide variety of fields, such as architectural, mechanical, electrical, and many more. I primarily work with Autodesk Inventor and Autocad but I have experience with other software as well.

I am a CAD Drafter with 5 years of experience in AutoCAD, specializing in industrial electrical enclosures and wiring. I handle design development, drafting, and documentation, excelling in creating d... Read more

I am a CAD Drafter with 5 years of experience in AutoCAD, specializing in industrial electrical enclosures and wiring. I handle design development, drafting, and documentation, excelling in creating detailed and accurate technical drawings such as enclosure layouts and wiring schematics. While my primary focus is on 2D drafts, I am actively working to grow my skills in 3D CAD. I have a sharp eye for detail and often catch errors that others might miss. With an engineering background, I have trained junior engineers in CAD drafting, project design, and quoting, fostering both precision and efficiency. I am passionate about solving problems, meeting client needs, and bringing ideas to life through my designs. Whether it's creating new designs, updating existing ones, or documenting builds that lack proper records, I am committed to delivering results that exceed expectations.

I am a very ambitious and motivated CAD designer who is always eager to learn and gain knowledge from everything I take part in. I take pride in all my work and am always trying to impress with my ski... Read more

I am a very ambitious and motivated CAD designer who is always eager to learn and gain knowledge from everything I take part in. I take pride in all my work and am always trying to impress with my skills. My primary work is in electrical design and I have experience with structural and mechanical design as well. I am also looking to explore other fields of design work to expand my skills. I typically use AutoCad, but I am proficient with all AutoDesk programs. I’m also familiar with most of the well know CAD programs. I have excellent attention to detail and problem solving skills and I am always going the extra mile to make sure I am doing everything I can to help the team.

I graduated with an Associate of Applied Science in CAD. Additionally, I have an occupation certificate in CAD and I am an ADDA certified Mechanical Drafter. I have worked with everything from office... Read more

I graduated with an Associate of Applied Science in CAD. Additionally, I have an occupation certificate in CAD and I am an ADDA certified Mechanical Drafter. I have worked with everything from office floor plans to P&ID and electrical schematics. I am currently employed full-time as a CAD Designer.

I'm an experienced AutoCAD Drafter/Designer. I have experience with Assembly Drawings, Electrical Schematics, Mechanical Drawings, Plumbing Systems, PC Board Layouts, Network Block Diagrams, Software... Read more

I'm an experienced AutoCAD Drafter/Designer. I have experience with Assembly Drawings, Electrical Schematics, Mechanical Drawings, Plumbing Systems, PC Board Layouts, Network Block Diagrams, Software Flowcharts, Survey Drawings, and Bill of Materials creation.

Experienced in AutoCAD through my time working as an Instrumentation and Controls Engineer at a Fortune 500 company. This included drafting panel designs, Instrument Layouts, P&IDs, and electrical sch... Read more

Experienced in AutoCAD through my time working as an Instrumentation and Controls Engineer at a Fortune 500 company. This included drafting panel designs, Instrument Layouts, P&IDs, and electrical schematics. I now work for a small Controls contractor and have gained experience developing Honeywell graphics screens for plant control operations. I gained my experience in SolidWorks while in college at an ABET accredited University. I have passed the FE exam and am currently working towards a PE license.

I’m Dave, an experienced Designer with over 20 years of history of working in the machinery, manufacturing and automation industries. Skilled in Inventor and AutoCAD, 3D Computer-Aided Design (CAD), E... Read more

I’m Dave, an experienced Designer with over 20 years of history of working in the machinery, manufacturing and automation industries. Skilled in Inventor and AutoCAD, 3D Computer-Aided Design (CAD), Electrical schematics, Control Systems Design, Hydraulic System Design, Controls Programming and Troubleshooting, Wire Harness Design, Mechanical Design, and Manufacturing.

I am I CAD drafter for an Audio Visual company in the Greater New York area. I currently provide Elevations, Plans and Electrical Schematics for clients and installers.

I am I CAD drafter for an Audio Visual company in the Greater New York area. I currently provide Elevations, Plans and Electrical Schematics for clients and installers.

Services I Offer 2D & 3D Drafting & Modeling • AutoCAD electrical schematics, panel schedules, and single‑line diagrams • Revit MEP models—HVAC layouts, plumbing isometrics, wiring and lighting plans... Read more

Services I Offer 2D & 3D Drafting & Modeling • AutoCAD electrical schematics, panel schedules, and single‑line diagrams • Revit MEP models—HVAC layouts, plumbing isometrics, wiring and lighting plans Design Coordination & Clash Detection • Cross‑discipline reviews to identify and resolve conflicts before construction Drawing Revision & Documentation • Updates per RFI responses, vendor submittals, and field changes • As‑built markups and revision clouds Code Compliance & Permitting Support • Coordinate with city, state, and county officials on life‑safety and energy requirements Cost Estimates & Punch Lists • Preliminary material take‑offs and field observation reports

I am an experienced E&I Engineer in the industrial automation sector, with strong proficiency in AutoCAD and working knowledge of MicroStation and Navisworks. I have a solid understanding of electrica... Read more

I am an experienced E&I Engineer in the industrial automation sector, with strong proficiency in AutoCAD and working knowledge of MicroStation and Navisworks. I have a solid understanding of electrical schematics, P&IDs, and enclosure layout design for custom fabrication. I also create control and automation graphics for industrial systems.

Self- starter with strong leadership and supervisory skills. Excellent communicator with the ability to elicit enthusiasm, energy, and drive from team using a common sense approach. Adept at analysing... Read more

Self- starter with strong leadership and supervisory skills. Excellent communicator with the ability to elicit enthusiasm, energy, and drive from team using a common sense approach. Adept at analysing situations and facts to develop appropriate course of action to achieve desirable outcomes. Continually focused on building relationships and promoting synergy across business lines to drive positive change, cohesive, comprehensive business approaches and enhanced profitability. Skilled in designing for plastic injection molding, sheet metal construction, and machining processes with experience in the design for, operation, and maintenance of fused deposition material (FDM) and polyjet rapid prototype equipment. Areas of Expertise include:  Product Design  Training and Development  Team Leadership  Sheet Metal Construction  New Product Management  Efficiency Enhancement  Process Improvement  Cost Reduction  Customer/ Supplier Relations Technical Skills: CAD• CAM• SolidWorks (CSWP) •AutoCAD• Microsoft Office Suite (Including Project and advanced Excel) •3D Printing (STL creation and editing) • Electrical Schematics • Reverse Engineering • Precision Measuring Tools • ASME Y14.5

10 years of professional drafting and customer service. I am proficient in drafting electrical schematics, single-line diagrams, as-builds, redlines, and PDF to CAD conversions.

10 years of professional drafting and customer service. I am proficient in drafting electrical schematics, single-line diagrams, as-builds, redlines, and PDF to CAD conversions.

I've worked for a range of clients from around the world. My objective is to address each project with a high level of detail and accuracy in order to support each customer. I strive to be professiona... Read more

I've worked for a range of clients from around the world. My objective is to address each project with a high level of detail and accuracy in order to support each customer. I strive to be professional in all of my work arrangements. Each project is an opportunity to make a positve mark on the world.