Hire Local CAD Designers near Johnstown, Pennsylvania

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned... Read more

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned. Joining your firm will gauge where I stand. No better opportunity than this can come my way. I can showcase my talent and prove my skills here, while in turn, I can learn how this industry functions in and out. That is why you may hire me for this internship.

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background w... Read more

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background with a powerful record of ten years active expertise in diagnostic repair, project and merchandise development, business management, and engineering strategies. Established ability to with success analyze a team’s skills and hone in on those attributes to form a cost effective workplace. Demonstrates the flexibility to quickly learn in new areas furthermore delivering new ideas to the table, has effectively showcased being a convergent thinker and a pacesetter.

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Renderi... Read more

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Rendering, Strain, and Flow Analysis Trained Hobbies: Music, Art, Optics, Robotics, Soccer, Video Games

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester... Read more

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester University of Pennsylvania Biomedical Engineering program to adopt more 3D printers and expand their CAD softwares through my own use of such technology. Through such technological skills, I played a role in 3 additional Senior Design Projects aside from my own as a Junior and Senior with my 3D modeling and printing expertise, and improved the technical outputs of Chester High School to inspire students into STEM field careers by helping a team win 2nd place in their local science fair competition with a modular, 3D printable water filter. My background in designing biomedical devices, engineering hydroponic system attachments, assembling mechanical systems, and fine-tuning 3D printable gadgets will bring a wide perspective and various technical skills to any project.

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3... Read more

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3.0 and (REX- Reverse Engineering Extension , Autodesk Inventor, Geomagic Design / Design X, AutoCAD (Mechanical), and Autodesk Fusion 360. I'm also highly skilled in the following CAD/CAM Software: MasterCam X7 to X9, Esprit, Bob cad /cam

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as... Read more

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as a CNC machinist and toolmaker Own small machine shop-specializing in prototype machining and development. i have 3 axis milling capability with a HAAS VF3 CNC machining center, I also have both CNC and manual lathe, 3-D printer, 4 axis router, 4 axis laser Diode and IR) for engraving and cutting of thin metals , TIG and MIG welding, surface grinding, and extensive experience in CNC programming, and fixture design for machining . My primary focus is prototype development, and design for manufacturing. I prefer to deign and build small mechanism and machine components.

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you... Read more

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you with your latest project! My background includes modeling for my University's Formula SAE Team, and modifying existing free prosthetic arm models for amputees in need through the eNABLE foundation. I also have experience turning 2D drawings to working 3D CAD Models. Feel free to contact me with any questions or concerns!

I have extensive experience with Mechanical Design using CAD software. I have worked as a Mechanical Design intern and Teaching assistant for CAD software. I can assist in the design process and produ... Read more

I have extensive experience with Mechanical Design using CAD software. I have worked as a Mechanical Design intern and Teaching assistant for CAD software. I can assist in the design process and product design. I can Prepare 3D models, Complex assemblies, 2D drawing, and rendering animation. Expert in Solidworks modeling and assembly. I can also perform Thermal and structural simulations.

My background is sheet metal and general metal fabrication, with an understanding of general machining operations. SolidWorks sheet metal professional certification. Experienced in reverse engineering... Read more

My background is sheet metal and general metal fabrication, with an understanding of general machining operations. SolidWorks sheet metal professional certification. Experienced in reverse engineering of legacy/discontinued products with an eye for product improvement and cost savings. Experience in intermediate 3D modeling, assemblies, proficient in detailing shop/mfg drawings. Also experienced in cost estimation and project management.

Experienced in design of Consumer/Industrial Electronics, Medical Device & Scientific Instruments Familiar in Design for Manufacturing & Assembly including Machining/Turning, Sheet Metal/Plastic, Inj... Read more

Experienced in design of Consumer/Industrial Electronics, Medical Device & Scientific Instruments Familiar in Design for Manufacturing & Assembly including Machining/Turning, Sheet Metal/Plastic, Injection Molding, Stamping, Drawing, Extrusion, Brazing, Welding, and Electronic Assembly

Exhibit designer with experience designing museum exhibits, trade show, experiential and retail displays. Able to develop anything from a simple pop-up or retail shelf up to an entire science center.

Exhibit designer with experience designing museum exhibits, trade show, experiential and retail displays. Able to develop anything from a simple pop-up or retail shelf up to an entire science center.

Proficient in using Revit for comprehensive project development, from concept to completion, including the creation of custom project templates and parametric families. Highly skilled in creating and... Read more

Proficient in using Revit for comprehensive project development, from concept to completion, including the creation of custom project templates and parametric families. Highly skilled in creating and assigning parameters within Revit families to support the development of schedules, quantity takeoffs, tags, and other critical documentation for project coordination. Fully competent in creating and maintaining Revit projects, including working with Central and Local Models to support collaborative workflows across teams

Auto Cad drafting specialized in the glass and glazing industry with 13 plus years of completing curtain wall , storefront , and all glass entrance shop drawings , fabrication drawings, and closeout d... Read more

Auto Cad drafting specialized in the glass and glazing industry with 13 plus years of completing curtain wall , storefront , and all glass entrance shop drawings , fabrication drawings, and closeout documents. I also have the skills to run material and completing estimates for bids

I actively work to provide custom systems for factory automation. I also have experience with 3d printing.

I actively work to provide custom systems for factory automation. I also have experience with 3d printing.

Army veteran, CAD designer, problem solver. From a lifetime of challenges and experiences, I possess the skills necessary to solve any problem and create any product you can imagine. Main focuses are... Read more

Army veteran, CAD designer, problem solver. From a lifetime of challenges and experiences, I possess the skills necessary to solve any problem and create any product you can imagine. Main focuses are Automotive, Defense, and Drone industries, blending mechanical, electronic, and cutting-edge tech to deliver modern solutions.

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented... Read more

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented and strive to take initiative and complete design work above and beyond customer requests.

I’m a degreed mechanical engineer with over 30 years of hands-on experience in manufacturing, mechanical design, and engineering leadership. My career spans industries including automotive, consumer p... Read more

I’m a degreed mechanical engineer with over 30 years of hands-on experience in manufacturing, mechanical design, and engineering leadership. My career spans industries including automotive, consumer products, industrial equipment, and more. This broad background gives me a practical understanding of how to turn ideas into production-ready solutions. I specialize in CAD modeling using SolidWorks and AutoCAD, with deep expertise in design for manufacturability (DFM), tolerance stack-up, BOM creation, and production optimization. Whether you’re prototyping a new product, refining an existing design, or converting legacy CAD files, I bring precision, speed, and real-world insight to every project. My professional history includes roles as a Manufacturing Engineer, Project Engineer, Engineering Manager, Mechanical Designer, and Operations Manager. I’ve led cross-functional teams, improved throughput, reduced tooling costs, and solved complex design challenges under tight deadlines. What I offer: • Production-ready CAD models and assemblies • Legacy CAD file conversion and cleanup • Design optimization for CNC, injection molding, and additive manufacturing • Tolerance analysis and GD&T application • BOM creation and documentation • Remote consulting for manufacturing process improvement I’m available for short-term projects, long-term collaborations, and remote engagements. Let’s make your design not just functional but manufacturable.

I am a CAD Modeler aiming to support my clients' physical product development efforts in a cost-effective way by making CAD models in Fusion360. I have 15 years of experience in product development... Read more

I am a CAD Modeler aiming to support my clients' physical product development efforts in a cost-effective way by making CAD models in Fusion360. I have 15 years of experience in product development, both in large enterprise at Caterpillar and in my own company, Velocity Robotics, as an entrepreneur. I have been on both sides of the freelance relationship and understand what it takes to maximize the value provided to my clients. If you need somebody to turn your drawing or idea into a 3D model, I can help. If you need help with prototyping and engineering, or just another set of eyes on your design, I can help there too. I have a degree in mechanical engineering and a lot of experience prototyping and testing parts and assemblies. I can even 3D print parts and send them to you, and even test fit assemblies in house. I'm looking forward to the opportunity to meet you and discuss your business needs and how I can help. Sincerely, Brad Kriel

I own a remote drafting company that serves the US from Pittsburgh. With over 9 architects and 2 engineers, we can provide quick and affordable Project based deliverables.

I own a remote drafting company that serves the US from Pittsburgh. With over 9 architects and 2 engineers, we can provide quick and affordable Project based deliverables.

Over 20 years of experience with CAD/D in various industries with a broad understanding of engineering environments. Organized professional augmented by a unique blend of excellent technical, customer... Read more

Over 20 years of experience with CAD/D in various industries with a broad understanding of engineering environments. Organized professional augmented by a unique blend of excellent technical, customer service and hands-on skills. Versed in Adobe Creative Suite: various design & graphics related tools and apps. Stratasys Certified 3D Printer Technician.

Over 8 years of experience in CAD/CAM industry with hands-on machining operation for Northwood, Fadal machines.

Over 8 years of experience in CAD/CAM industry with hands-on machining operation for Northwood, Fadal machines.

My design journey over the years has taken me from a textile librarian to creating funky rooms for children on HGTV to designing and implementing rooms and homes for IKEA stores across the US. I ha... Read more

My design journey over the years has taken me from a textile librarian to creating funky rooms for children on HGTV to designing and implementing rooms and homes for IKEA stores across the US. I have worked for almost 20 years as an interior designer, have designed over 75 rooms and several small space homes, and am still hungry for more design! A well designed space should reflect the people who live there, fitting their lives both beautifully and functionally. It should be timeless but also open to change and evolve, just as the people who live in the space change and evolve. I embrace culture and eclectic ideas, which shows in my designs. My style is modern while keeping a hand on the door to the past, creating eclectic and beautifully coordinated designs for living.

Hi my name is Malki Stein, and I recently completed a rigorous program known as Design Alive, where I delved into the intricacies of interior design and AutoCAD. My primary focus throughout the progra... Read more

Hi my name is Malki Stein, and I recently completed a rigorous program known as Design Alive, where I delved into the intricacies of interior design and AutoCAD. My primary focus throughout the program was on tasks related to elevations and electrical design. One of the most notable highlights of my year-long journey was the opportunity to meticulously draw and contribute to the design of a residential space. My core strength lies in my ability to effectively communicate with clients and discern their specific needs and preferences within the realm of interior design.

Experienced in a plethora of civil engineering projects from small parking lots to amusement park to school athletic facilities. Highly efficient Civil 3d but I'm proficient in GIS, for map building,... Read more

Experienced in a plethora of civil engineering projects from small parking lots to amusement park to school athletic facilities. Highly efficient Civil 3d but I'm proficient in GIS, for map building, infraworks, for 3d models and videos and auto turn. I've done some light sketch ▒▒▒▒▒▒▒

Drafter/Designer with a AAS degree in Civil Engineering with a focus in Architecture. I have a passion for design. I enjoy even the simplest of projects. I have experience is drawing floor plans with... Read more

Drafter/Designer with a AAS degree in Civil Engineering with a focus in Architecture. I have a passion for design. I enjoy even the simplest of projects. I have experience is drawing floor plans with some MEP experience