Hire Local CAD Designers near Escondido, California

Im Mechanical Designer with experience building machinery, fixtures and jigs using CAD softwares. More than 10 years of experience in the industry of consumer electronics and plastic molding injection... Read more

Im Mechanical Designer with experience building machinery, fixtures and jigs using CAD softwares. More than 10 years of experience in the industry of consumer electronics and plastic molding injection area. *Knows of GD&T and Safety machinery methodology *Full projects management from start to finish *Strict communications with client, for me its very important for a total satisfaction.

Mechanical Design Engineer with 20 years experience in consumer products, low cost high volume manufacturing

Mechanical Design Engineer with 20 years experience in consumer products, low cost high volume manufacturing

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can u... Read more

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can understand and contractors can utilize to build your project.

I just liking CADing.

I just liking CADing.

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial C... Read more

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial College London, a globally top-10 university. My capabilities include but are not limited to: - Product Design (hand sketches/design conceptualization) - Consulting and Recommendations for Design for Manufacturability, Material Selection, and Manufacturing Methods - Design for Manufacturing – Injection Molding, CNC Machining, Forming, Casting, etc. Mold Design - 3D Modeling - Sheet Metal (3D Model and DXF Files with bends and cut lines) - 3D Simulation and Analysis (stress/strain/fluid flow/volumetric analysis/fatigue analysis/center of gravity/etc.) - Dynamic Motion Simulation - 3D Renderings (Photo Realistic) - 2D Engineering Drawings (ASME Y14.5 Standard) - Assembly Drawings with BOM (Bill of Materials) - Design Specification Drawings - Tech Packs I have launched a freelance mechanical design engineering practice, StellarForged, working with a diverse range of clients—from small startups to established companies. Whether you're tackling a fundamental engineering challenge or navigating a complex problem, I provide the expertise and support needed to drive your success. https://stellarforged.com/

Specializing in sheet metal and tubing, with extensive experience in prototyping and product design for manufacturability. Skilled in SolidWorks, having created over 1000 parts and assemblies with bui... Read more

Specializing in sheet metal and tubing, with extensive experience in prototyping and product design for manufacturability. Skilled in SolidWorks, having created over 1000 parts and assemblies with build sheets, BOM, etc. Focused on optimization of efficiency, precision, and production readiness.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

+ Lots of experience in designing complex mechanical systems, mainly competition robots and robot components + Experience in designing technical 3D prints, from compact, low cost belt sanders to modu... Read more

+ Lots of experience in designing complex mechanical systems, mainly competition robots and robot components + Experience in designing technical 3D prints, from compact, low cost belt sanders to modular desktop organizers + Strength of creativity used to value and emphasize elegant, functional designs + Multiple years of SolidWorks CADding and Rendering experience + Helped design a world championship level competition robot, winning a design award. + Designed an affordable, compact belt sander, receiving thousands of upvotes and multiple rewards on Reddit

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the... Read more

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the opportunity to work with different companies which gave me the ability to learn about diverse products and manufacturing processes. Actually working with a small company in North San Diego as R&D lead mechanical engineer. In additionI am offering my services to people who are looking to make a modification to an existing product, to reverse engineer a component, generate file for 3D printing, generate drawing for quote or drawings for patent submission. I utilize 3D software from which I extract parametric drawings and files I can use to 3D print. Please don't hesitate to contact me for a quick preliminary pricing.

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project... Read more

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project from concept to supply chain design and procurement strategy, and would love to do the same for you.

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D f... Read more

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D floor plans, elevations, and section drawings ✅3D modeling in SketchUp & AutoCAD ✅Revit MEP electrical layouts and system design ✅Photorealistic rendering for presentations ✅Electrical drafting for residential and commercial projects ✅CAD Conversion ✅Clash Detection and Animation

Hello, this is ERosner and I'm a freelance Art Director, Illustrator and 2d/3d Motion Graphic Designer in Los Angeles. I have created design and motion for: Viacom MTV, Rick and Morty, the City of We... Read more

Hello, this is ERosner and I'm a freelance Art Director, Illustrator and 2d/3d Motion Graphic Designer in Los Angeles. I have created design and motion for: Viacom MTV, Rick and Morty, the City of Westwood, the City of Venice, CB2, The Moma Design store, Nickelodeon, ▒▒▒▒▒▒▒▒▒▒ TVLand, BoConcept and others. Social media, motion design, merchandise, invites, posters and more. Fun art for merchandising. Let’s chat about working together on some fabulous new projects. Eric www.erosner.com 917-405-8961 Demo reel https://youtu.be/FKp_mxnikNs Fabulous book covers https://www.erosner.com/new-gallery-1 Wow, more fabulous sample projects https://99designs.com/profiles/erosner

Paul Murphy is a product designer and engineering strategist with 30+ years of experience turning complex concepts into manufacturable products. He has led engineering and design teams for several glo... Read more

Paul Murphy is a product designer and engineering strategist with 30+ years of experience turning complex concepts into manufacturable products. He has led engineering and design teams for several global brands. He founded FILE2FAB, a Los Angeles–based design engineering firm that creates production-ready solutions. The firm delivers practical, end-to-end support from concept and CAD development through prototyping and manufacturing. FILE2FAB serves clients in Aerospace, Medical Devices, Footwear, Apparel, and precision fabrication, providing: • Industrial and mechanical design • CAD modeling, 3D scanning, reverse engineering, and digital fabrication • Design for manufacturing (DFM) and design for assembly (DFA) • Prototyping and material testing Paul combines production expertise and design discipline to create products that are visually refined, technically sound, and commercially viable. His recent work includes fully reverse engineering and redesigning the Golden Globe Award for the Hollywood Foreign Press Association.

I have a passion for Solidworks, AutoCAD, and photoshop so I am eager to expand my knowledge set and skills utilizing this software to help anyone that needs general 3D and 2D design assistance. I cu... Read more

I have a passion for Solidworks, AutoCAD, and photoshop so I am eager to expand my knowledge set and skills utilizing this software to help anyone that needs general 3D and 2D design assistance. I currently have access to the following programs: -SolidWorks (2017) -AutoCAD (2017) -Photoshop (CS2) My core skill set is SolidWorks which extends 4 years and I have the ability to work using the tools below: -Photoview 360 (Rendering) -Surfaces -Sheet Metal -Weldments -Molds -Sketches -Animations (motion studies) -Complex Assemblies -Converting conceptual data to computer models -Product design & Development -3D Modeling and Rendering AutoCAD I am working extensively to obtain a higher skill set to progressively take on more complex and difficult Problems. General skill set is listed below for AutoCAD: -2D Archtecture -2D Park/landscape Layouts -Satellite image to AuoCAD -Layer Management -Custom Template/Drawings Photoshop skills are limited to essential photograph manipulation and digital art. Being entree level, I seek to work hard on your projects for very low cost to benefit you as well as well as use the opportunity for improvement in the Engineering / Manufacturing field. I am excited and will love to assist on any of your projects as I would put the same level of attention into them as I would my own. Please view my personal website / portfolio to view examples of my past work to give you a better understanding of my qualification. I look forward to working with you. Thank you, Cameron Ross

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic... Read more

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic environments, I stay focused on delivering solutions that exceed expectations. Let's drive success together.

I can put together a professional grade, permit-ready set of drawings for most houses, accessory buildings, and remodels. In some cases, a structural engineer may be required to provide calculations.... Read more

I can put together a professional grade, permit-ready set of drawings for most houses, accessory buildings, and remodels. In some cases, a structural engineer may be required to provide calculations. I operate primarily in Northern California, but can design remotely in 46 states. Website: https://tdtconceptdesign.weebly.com/

I'm 2D/3D animations & landscape designer and i love natural work and have a awesome experience in Landscaping design & gardens.. i do - Design 3D Building, Furniture, Landscapes & Gardening. - De... Read more

I'm 2D/3D animations & landscape designer and i love natural work and have a awesome experience in Landscaping design & gardens.. i do - Design 3D Building, Furniture, Landscapes & Gardening. - Design Pictures, Logo & All Marketing Stuff. - Utilization Solutions

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Mode... Read more

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Modeling, and Architectural Visualizations. Currently working at Tesla.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

Professional engineering experience in various industries including aerospace, tool & die, injection molding, die casting and plastics industries. Hands on experience in small business operations, pr... Read more

Professional engineering experience in various industries including aerospace, tool & die, injection molding, die casting and plastics industries. Hands on experience in small business operations, product design, reverse engineering and 3D inspection, marketing, invention development, 3D laser scanning, FEA analysis, and sales engineering.

I am an architect. I have 12 years of experience in the field of Interior Design, Facade Design, and 3d presentation. I am Responsible and punctual. And I love learning new things in my field.

I am an architect. I have 12 years of experience in the field of Interior Design, Facade Design, and 3d presentation. I am Responsible and punctual. And I love learning new things in my field.

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, o... Read more

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, organized, intelligent, motivated, and communicative.

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference m... Read more

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference materials into official black-and-white line drawings with the high precision required for successful patent applications.   My Core Strengths: Expert Compliance: Extensive experience in meeting strict USPTO standards using Adobe Illustrator.   Precision Engineering: Background in production-ready 3D modeling (Autodesk Alias) ensures every drawing is technically accurate.   Proven Track Record: Successfully developed numerous registered patent drawings (e.g., US D1,087,866 S).   I am committed to providing high-quality technical illustrations that support your intellectual property goals efficiently.

A 3D Modeler with a comprehensive knowledge base and specialized skill combination of 3D modeling, texture, UV mapping, rigging, rendering, and animation.

A 3D Modeler with a comprehensive knowledge base and specialized skill combination of 3D modeling, texture, UV mapping, rigging, rendering, and animation.

Mechanical Design Engineer & Drafter providing CAD consulting as POHL3D. Message me if you'd like to connect or are in need of some CAD help. Thanks & Take Care!

Mechanical Design Engineer & Drafter providing CAD consulting as POHL3D. Message me if you'd like to connect or are in need of some CAD help. Thanks & Take Care!