Storybook Drafting Solutions, LLC is a U.S.-based drafting studio specializing in fast, accurate structural and architectural CAD support for architects, engineers, and contractors. Founded in 2023, w... Read more

Storybook Drafting Solutions, LLC is a U.S.-based drafting studio specializing in fast, accurate structural and architectural CAD support for architects, engineers, and contractors. Founded in 2023, we combine 18+ years of architectural experience with real-world construction knowledge to deliver high-quality drawings on tight deadlines. We provide: -AutoCAD 2D drafting and detailing -Revit 3D modeling and BIM support -2D to 3D conversions -3D renderings, modeling, and walkthroughs -Architectural redlines, construction documents, and as-builts -CAD templates and standardized drawing sets What sets us apart: -24/7 availability and responsive communication -Fast turnaround, including select 24-hour delivery -Two-person quality control review on every project -Woman-owned, founder-led team based in Ohio (Cleveland & Springfield) Comfortable with healthcare, education, retail, office, and other commercial projects Ideal projects for us range from 8–20 hours, but we also handle smaller “fill-in” drafting tasks and urgent revisions. Whether you need help catching up on a backlog, polishing redlines, or producing full construction documents, we act as an extension of your in-house team. Software expertise: -AutoCAD -Revit -SketchUp - -Photoshop / Illustrator If you’re looking for reliable, detail-oriented drafting support with clear communication and fast turnaround, Storybook Drafting Solutions is ready to help. Share your project details, and we’ll provide a clear scope, timeline, and professional CAD deliverables tailored to your standards. Disclaimer: Storybook Drafting Solutions, LLC is not a licensed architecture or engineering firm. Our drafting services are intended for design, planning, and coordination purposes only and do not replace the services of a licensed architect or engineer. Final plans may require review and approval by a licensed professional as required by local building codes or permitting authorities. It is the client’s responsibility to ensure compliance with all applicable regulations and to engage licensed professionals as needed.

I have 8 years of experience in cad design. I have a background in electrical and piping design both 2D/3D designs. I have 3 years of experience in custom fabrication of heat exchangers, HVAC systems,... Read more

I have 8 years of experience in cad design. I have a background in electrical and piping design both 2D/3D designs. I have 3 years of experience in custom fabrication of heat exchangers, HVAC systems, and water filtration systems.

I have been using AutoCAD and Revit for about 9 years now and I am well versed in all product features and functions. I utilize drafting software primarily for building design - specifically HVAC and... Read more

I have been using AutoCAD and Revit for about 9 years now and I am well versed in all product features and functions. I utilize drafting software primarily for building design - specifically HVAC and Plumbing. I’m up to speed in the latest BIM 360 technologies for coordination amongst multiple consultants. I’m also a licensed professional mechanical engineer with stamps in KY, OH, FL, TX, MI, OR, and TN. I have a full understanding of HVAC and Plumbing design.

I currently work as a Mechanical Design Engineer with a custom automation machine builder. I design solutions for customers, starting with converting, all the way to the placement of sensors. My past... Read more

I currently work as a Mechanical Design Engineer with a custom automation machine builder. I design solutions for customers, starting with converting, all the way to the placement of sensors. My past experience was in the manufacturing sector, specifically automotive. I worked on and designed stamping dies. I have spent a lot of my professional career in Autodesk Inventor, but have worked in Fusion360 and Creo.

I’m a Senior in Highschool in pursuit of some sort of way to apply my engineering skills in areas other than school. InAugust I will being going to school for Aerospace Engineering and I'd like to sta... Read more

I’m a Senior in Highschool in pursuit of some sort of way to apply my engineering skills in areas other than school. InAugust I will being going to school for Aerospace Engineering and I'd like to start saving to pay for it. I've been doing CAD for the past 4 years in school in my drafting classes, partially with my High school and partially with a local college. I feel that I excel in creating models off of ideas such as drawings like for parts or patents.

I can provide a concept and bring your concept to life! I have a 3d printer and can provide you with a physical model of your concept.

I can provide a concept and bring your concept to life! I have a 3d printer and can provide you with a physical model of your concept.

Hi there! My name is Colin Cormier. I'm new to CadCrowd, but I'm a freelance product designer in the Cincinnati area with focuses in CAD, fabrication, and prototyping. I've completed work for P&G, Cin... Read more

Hi there! My name is Colin Cormier. I'm new to CadCrowd, but I'm a freelance product designer in the Cincinnati area with focuses in CAD, fabrication, and prototyping. I've completed work for P&G, Cincinnati Children's Hospital, Boeing, and Sauder among many others over the 5 years I've spent in the field. When I'm not busy building stuff, I teach 3D modeling and rapid prototyping at my alma mater, the University of Cincinnati. I can provide full support for 3D modeling including product drawings, rendering, and prototyping through various technologies such as 3D printing and CNC. I would love to work with you and hear what you're working on! If you're interested in working with me, please contact me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or 919-802-8237. Thank you! - Colin Cormier

Jonathan Schaefer is the founder of June Design, a boutique architecture firm located in Cincinnati, Ohio, USA. He studied architecture at the University of Cincinnati, and received his Master of Arch... Read more

Jonathan Schaefer is the founder of June Design, a boutique architecture firm located in Cincinnati, Ohio, USA. He studied architecture at the University of Cincinnati, and received his Master of Architecture from the Ohio State University along with a Minor in City & Urban Planning. He has experience in both technical drafting skills, 3D modeling, as well as photorealistic and conceptual rendering. Please visit his website (listed below) to view a full catalogue of past and current projects.

I am a mechanical engineer with experience in the design and development of consumer products and medical devices. I have been involved in every step of the product development process--from initial i... Read more

I am a mechanical engineer with experience in the design and development of consumer products and medical devices. I have been involved in every step of the product development process--from initial ideation and prototyping to failure testing and inspection. I have also completed a number of reverse engineering projects. I am an experienced user of SolidWorks, PTC Creo, and Siemens NX. I currently use OnShape for CAD and drawing needs, unless a specific program request is made. Also, with a background in visual art, I am used to working closely with industrial and graphic designers and creating reports and presentations for marketing teams and customers.

I have worked as a mechanical design engineer for over 10 years after graduating from the University of Cincinnati with a Mechanical Engineering degree. I have specialized in modeling for most of my c... Read more

I have worked as a mechanical design engineer for over 10 years after graduating from the University of Cincinnati with a Mechanical Engineering degree. I have specialized in modeling for most of my career but have also worked on a team to design and build large machines for a machining shop as well as fixturing for many others.

Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ I am a mechanical design engineer with 3 years of professional experience at Pratt Miller. I am familiar with a variety of CAD softwares, and have access to Solidw... Read more

Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ I am a mechanical design engineer with 3 years of professional experience at Pratt Miller. I am familiar with a variety of CAD softwares, and have access to Solidworks and Fusion 360 on my personal computer. In addition to my professional experience, I have an extensive portfolio of personal 3D printing projects. I have a bachelors in Mechanical Engineering from Michigan State University. During college, I participated heavily in Baja SAE offroad racing - a competition series where students design and build and an offroad vehicle from the ground up. This vehicle is brought to annual competitions to race against other schools, and the teams give design presentations to judges. I was the chief engineer for the team my last two years of college, and designed the chassis and suspension system. I own a Prusa MINI+ 3D printer

Reverse Engineering Expert with CMM access Precise 3D modeling for 3D printing or CAM Tool/Fixture design expert Patented Inventor of a diesel exhaust manifold seal

Reverse Engineering Expert with CMM access Precise 3D modeling for 3D printing or CAM Tool/Fixture design expert Patented Inventor of a diesel exhaust manifold seal

Hey! I'm Junior and I have over a decades worth of experience in Mechanical Design, Manufacturing, reverse engineering & more. I'm highly skilled in many softwares but my favorites are Solidworks & Bl... Read more

Hey! I'm Junior and I have over a decades worth of experience in Mechanical Design, Manufacturing, reverse engineering & more. I'm highly skilled in many softwares but my favorites are Solidworks & Blender. I have also gained much experience using Revit due to my love of architecture. Best thing about me is that I'm highly driven and always up for a challenge. My skills : - 3D Rendering - 3D modeling - Product Design - Mechanical Part Modeling - Industrial Design

Bachelor's in mechanical engineering with experience in multiple platforms. Have completed work in mechanical design, CAM, and electrical routing.

Bachelor's in mechanical engineering with experience in multiple platforms. Have completed work in mechanical design, CAM, and electrical routing.

I graduated in 2002 and started my career as a piping designer. I worked directly with a mechanical engineer in large projects in retail stores, industrial manufacturing plants, commercial office bui... Read more

I graduated in 2002 and started my career as a piping designer. I worked directly with a mechanical engineer in large projects in retail stores, industrial manufacturing plants, commercial office buildings, and schools. After 3 years I moved to an HVAC designing position, designing and drawing HVAC systems for permit and construction. After the economic hit in the late 2000's I moved to a software management position. Currently I oversee, support, and control all of our BIM software, which includes AutoCAD, Navisworks, Revit, Fabrication CADmep, Fabrication ESTmep, and Fabrication CADduct. I've developed our processes and procedures, along with the entire BIM coordination workflow.

Multi-disciplined engineer with over a decade of experience in the Aerospace and Defense industries working in all aspects of the product development cycle. From prototype design and test, to oversee... Read more

Multi-disciplined engineer with over a decade of experience in the Aerospace and Defense industries working in all aspects of the product development cycle. From prototype design and test, to overseeing manufacturing and procurement of parts, and finally assembling products and completing life cycle tests to determine longevity. I can bring a broad perspective on any design project to ensure meeting the customer's exact needs both technically and economically.