I’m a Mechanical Engineer specialized in 3D CAD modeling and mechanical design. I’ve worked on real engineering projects and Formula Student race car design (braking system, suspension and chassis com... Read more

I’m a Mechanical Engineer specialized in 3D CAD modeling and mechanical design. I’ve worked on real engineering projects and Formula Student race car design (braking system, suspension and chassis components), always focusing on precision, performance and manufacturability. I can help you with: • 3D models and assemblies ready for manufacturing (CATIA, SolidWorks) • 2D engineering drawings, GD&T and BOMs for suppliers • Sheet metal and welded structures (laser-cut, bent, welded parts) • Basic FEA simulations in ANSYS (stress, stiffness, safety factor) Whether you’re developing a prototype, optimizing a component, or need clean documentation. I deliver fast, reliable and well organized results. Clear communication, version control and attention to detail are my priorities on every project. I also use MATLAB/Excel for engineering calculations, and have experience with KISSsoft (gear design) and MSC ADAMS (vehicle dynamics and suspension simulations) from real Formula Student projects.

Hello! We are two Mechanical Engineers with 10+ years of experience in CAD design and management roles. Our services include: • 3D modeling and CAD design from idea or sketch to production-ready file... Read more

Hello! We are two Mechanical Engineers with 10+ years of experience in CAD design and management roles. Our services include: • 3D modeling and CAD design from idea or sketch to production-ready files • Prototyping support for startups and small businesses, including design optimization • Reverse engineering of existing parts – creating accurate 3D models and technical drawings • Conversion of old or legacy technical drawings into modern CAD files • Assembly drawings and detailed manufacturing documentation Why Choose Us? • 10+ years of expertise in mechanical engineering • Tailored solutions • On-time delivery • Clear, responsive communication throughout the project Ready to start? Message us to discuss your project and get a customized plan! — Mehatrons Team

What I Offer: - Design for Manufacturing (DFM): I focus on designing products that are not only innovative but also easy and cost-effective to manufacture. - Detailed Workshop & Manufacturing Drawing... Read more

What I Offer: - Design for Manufacturing (DFM): I focus on designing products that are not only innovative but also easy and cost-effective to manufacture. - Detailed Workshop & Manufacturing Drawings: I create precise, production-ready drawings that clearly communicate your design intent to the workshop and manufacturing teams. - 3D Models & Prototypes: Whether you're looking for fully detailed 3D models or print-ready prototypes, I deliver accurate and production-friendly designs. - Sheet Metal & Flat Patterns: Expertise in creating efficient sheet metal designs and flat patterns, ensuring minimal material waste and easy fabrication. - Component Development & Machine Design: I design individual components and complete machines with a focus on performance, reliability, and manufacturability. - CAD Tools Expertise: Proficient in Autodesk Inventor and AutoCAD for 3D modeling, drafting, and detailed design documentation. How I Can Help You: I work closely with clients to understand their requirements and challenges, transforming ideas into practical, manufacturable solutions. My attention to detail and commitment to quality ensure that all designs meet both functional and production standards. Whether you need help converting designs to CAD, redrawing existing components, or developing new products from scratch, I bring a wealth of experience to each project. Let's work together to turn your vision into a successful product!

Professional Mechanical Engineer specializing in Reverse Engineering and CAD modeling of 3D-scanned parts. I have several years of hands-on experience working with industrial-grade 3D scanners, conver... Read more

Professional Mechanical Engineer specializing in Reverse Engineering and CAD modeling of 3D-scanned parts. I have several years of hands-on experience working with industrial-grade 3D scanners, converting point clouds and mesh data into accurate, fully parametric CAD models suitable for manufacturing, inspection, and redesign. I work daily in SolidWorks, CATIA, Siemens NX, and Autodesk Inventor, delivering clean, production-ready models with proper tolerances, feature history, and design intent preserved. My expertise includes reverse engineering of mechanical components, housings, automotive parts, assemblies, and legacy components with missing or outdated documentation. I focus on precision, manufacturability, and clear communication, ensuring clients receive reliable CAD data that fits their production needs. I am comfortable collaborating remotely with international teams and meeting tight deadlines. Key skills: Reverse engineering from 3D scan data (mesh / point cloud to CAD) Parametric mechanical CAD modeling Industrial 3D scanning workflows Manufacturing-oriented design and documentation SolidWorks, CATIA, Siemens NX, Autodesk Inventor If you need accurate reverse-engineered CAD models from scanned parts, I can deliver efficient and professional results.

As a highly skilled in product, mechanical, sheet metal, piping and structural design with good understanding of production and assembly processes, I’m apply my knowledge and experience in design, by... Read more

As a highly skilled in product, mechanical, sheet metal, piping and structural design with good understanding of production and assembly processes, I’m apply my knowledge and experience in design, by using design tools like PMDS/ E3D / CATIA/ Solidworks, AutoCAD, Microstation and many other. I am able to administrate these tools and perform software customization to increase efficiency. Working on “Brown field” / EPCM projects I have used to work in context of scanned environment in form of PointCloud (Leica / Z+F/ LMI). I’m able to work fully independently, or as part of the team, or to take lead role with high level of responsibility and determination to complete project in shortest possible time with highest level of quality of delivered solutions or end documentation. I’m able to communicate in English, Serbian, Croatian and limited German language.

Mechanical Engineer with experience in production process optimization and hands-on development of embedded and IoT prototypes. Skilled in mechanical design, CAD modeling, sensor integration, Arduino-... Read more

Mechanical Engineer with experience in production process optimization and hands-on development of embedded and IoT prototypes. Skilled in mechanical design, CAD modeling, sensor integration, Arduino-based systems, PLC programming fundamentals, and technical problem solving. Interested in prototype development, industrial automation, and embedded product design.

Hello! I’m a hardware engineer with many projects behind me, some simple, some highly complex, but all completed with great care and attention to detail. I work closely with a driven group of young en... Read more

Hello! I’m a hardware engineer with many projects behind me, some simple, some highly complex, but all completed with great care and attention to detail. I work closely with a driven group of young engineers on developing hardware and software for diverse projects. We have deep experience in designing reliable, production-ready hardware and firmware using modern MCUs (ESP32, STM32, TI, C2000), high-power topologies, battery systems, and a wide range of communication protocols. Our lab is fully equipped for prototyping, testing, and validation, including oscilloscope work, precision measurements, firmware bring-up, and full board bring-up. Over the years, I (and we) have gained experience designing high power, mixed-signal PCBs where signal integrity and EMI problems can occur. Technical Expertise: Hardware & Power Electronics • Topology selection: buck, boost, flyback, SEPIC, PFC buck, forward, synchronous drivers • Wide range power design up to 5 kW, switching frequencies up to 5 MHz • Battery systems: BMS, balancing, charging, MOSFET drivers PCB Design • Professional PCB layout using Altium Designer and KiCAD • High density, mixed signal, high current, high voltage, and EMC safe design • Rigid flex, microcontroller modules, RF layouts • Full DFM/DFT optimization for production Communication Protocols • CAN, I²C, SPI, UART, RS485 • Bluetooth, Wi Fi • Ethernet Software & Simulation • MATLAB, Simulink, PSpice • LTspice, TINA, • Firmware bring up Prototyping & Testing • Soldering, rework, fault analysis • Gate driver tuning, feedback loop stabilization • Load testing, thermal evaluation, EMC preparation If you need a reliable, complex PCB design that can pass EMC tests, along with all documentation required for manufacturing and assembly, you are in the right place. We’d be happy to take on your challenge! Best regards!

I am a technical and CAD-oriented professional with experience in maintenance, production support, 3D modeling, technical documentation, 3D printing and prototyping. My background combines practical... Read more

I am a technical and CAD-oriented professional with experience in maintenance, production support, 3D modeling, technical documentation, 3D printing and prototyping. My background combines practical industrial experience with CAD design and software engineering knowledge. I work with Autodesk Inventor, AutoCAD, Fusion 360, SolidWorks and other engineering tools, and I am interested in supporting engineering teams remotely with CAD modeling, 2D drawings, design preparation, prototype development and manufacturing documentation. I currently work in a technical maintenance and engineering-support environment within the medical industry, where precision, troubleshooting, documentation and reliability are very important. I am especially interested in projects related to mechanical design, product development, technical documentation, 3D printing, automation support and design-for-manufacturing.

I’m a mechanical engineer with 5 years of experience in 3D modeling and technical drawings. For the past 3 years, I’ve been working in the oil and gas industry, focusing on equipment such as pressure... Read more

I’m a mechanical engineer with 5 years of experience in 3D modeling and technical drawings. For the past 3 years, I’ve been working in the oil and gas industry, focusing on equipment such as pressure vessels, tanks, and heat exchangers. Additionally, I have 2 years of experience in modeling and drafting steel structures. I specialize in creating accurate 3D models and fabrication drawings using Autodesk Inventor, following international standards and client specifications.

Master of Engineering at University of Belgrade, on module for Thermal Power Engineering, with experience in Steam Boilers, Steam and Gas Turbines, Energy Management, MRO.

Master of Engineering at University of Belgrade, on module for Thermal Power Engineering, with experience in Steam Boilers, Steam and Gas Turbines, Energy Management, MRO.

I'm a mechanical design engineer based in Belgrade, Serbia with 5+ years of experience across the automotive, electrical, and metal industries. My background spans real BMW production programs, electr... Read more

I'm a mechanical design engineer based in Belgrade, Serbia with 5+ years of experience across the automotive, electrical, and metal industries. My background spans real BMW production programs, electrical enclosure design to UL891 standards, and reverse engineering full assemblies from photographs and legacy documentation. I currently lead a design team where I create detailed 3D models and documentation for EDC frames, metal constructions, and switchboards. Before that, I spent nearly three years at Ingenieurschmiede d.o.o. working on BMW exterior plastic components and foam insulation systems. I work with small engineering firms as an outsourced CAD resource — no hiring overhead, fast turnaround, and clear communication throughout. One project or an ongoing monthly retainer — I adapt to what you need.

I am a skilled SolidWorks designer with over 5 years of experience in mechanical and industrial design. I deliver precise, efficient 3D models and technical drawings tailored to client needs.

I am a skilled SolidWorks designer with over 5 years of experience in mechanical and industrial design. I deliver precise, efficient 3D models and technical drawings tailored to client needs.

A dedicated and experienced engineer with extensive knowledge of standards, specifications, theories, and engineering principles. Adept at 3D designing as well as overseeing the manufacturing process... Read more

A dedicated and experienced engineer with extensive knowledge of standards, specifications, theories, and engineering principles. Adept at 3D designing as well as overseeing the manufacturing process and working with other professionals to ensure the successful completion of projects. Skilled and experienced in designing, prototyping, and testing vehicles.

7+ years in Mechanical Engineering. Open to work remotely and support your projects. Capable in automation, CAD, CAM, 3D printing, parts list, BOM and more. If you need motivated, out-box thinker, dec... Read more

7+ years in Mechanical Engineering. Open to work remotely and support your projects. Capable in automation, CAD, CAM, 3D printing, parts list, BOM and more. If you need motivated, out-box thinker, decisions maker and cooperative person, contact me.

Experienced Mechanical Engineer with a demonstrated history of working in the Civil Engineering Industry, Mining Tools&Equipment. Skilled in Solid Edge, Autodesk Inventor, FEM analysis, Solidworks, K... Read more

Experienced Mechanical Engineer with a demonstrated history of working in the Civil Engineering Industry, Mining Tools&Equipment. Skilled in Solid Edge, Autodesk Inventor, FEM analysis, Solidworks, KeyShot etc. Strong engineering professional with a Master’s Degree focused in Automotive Engineering/Mining Tools&Equipment Technology/Technician from Faculty of Mechanical Engineering, University of Belgrade. Advising and Consulting on solving problems and improving current way of manufacturing.

Expert in the industrial services as well as development of innovative products (under the NDA and cannot be presented on my profile). With my team I successfully developed and manufactured products i... Read more

Expert in the industrial services as well as development of innovative products (under the NDA and cannot be presented on my profile). With my team I successfully developed and manufactured products in mobility, goods transportation, and consumer electronics industries. We have done more than 170 projects so far, and gain experience for each product development stage: feasibility study, concept design (compliance with functional requirements and limitations of prescribed technology), concept development (detailed design of assemblies and components in accordance with the limitations of materials and production processes), production preparation (BOM creation, material, and supplier definition), Manufacturing and testing. We are highly skilled in CAD using model parameterization, bottom-up and top-down approaches, as well as dFm, dAm approaches. The design approach that we deal with relies on the production processes for which the parts are developed, to save our clients time and money by timely thinking about the technology that will be used at the end of the product development. Regarding the documentation to produce parts, we can create it in accordance with the traditional approach or the GD&T approach. We would be glad to support you on your path.