Hire BOM Designers in Indonesia

More than 15 years of experience as a designer and drafter. First carrier in 1997 at Aircraft Industry, in the area of Aircraft Design at Indonesian Aerospace/IAe. Creating of Production Drawing and... Read more

More than 15 years of experience as a designer and drafter. First carrier in 1997 at Aircraft Industry, in the area of Aircraft Design at Indonesian Aerospace/IAe. Creating of Production Drawing and Modification in detail, assembly, and installation Design for N250 aircraft , NC212 aircraft , CN235 aircraft and NMX Light Jet Aircraft using CATIA V3, CATIA V4 and CATIA V5. Since November 2006 until June 2009 involve for WiGE-8 (Wing in Ground Effect-8 sitter) winged-craft project and WiGE-2 as designer/drafter, also as Structures and Mechanical Engineering Liaison. Integrate and package conveyance product into an Aircraft DMU. Creation of solids model layouts and assemblies. Creation and modification of 3D models from 2D drawings datasets using Catia V5 software. Completion of Engineering Changes on existing product with a requirement of ensuring that all details on the print (including BOM, notes, dimensions, change notice information etc.) are complete. Interaction with the Project Data Management systems to ensure current accuracy. Since July 2009 until May 2011 involve in Engineering Turbine Team at PT UMC NTP Bandung as Turbine drafter using CATIA V5 R18. Integrate and package conveyance product into an Turbine DMU. Creation of solids model layouts and assemblies. Creation and modification of 3D models and 2D drawings using Catia V5 software. Since June 2011 until October 2012 involve in Dmas Engineering Malaysia at PROTON/Perusahaan Otomobil Nasional Berhad, Malaysia, under Lotus Engineering Malaysia. Creation and modification of 3D models and 2D drawings using Catia V5 R18 software. Since November 2012 until present, joint at Henindo Technologies, 3D scanner consultant for Reverse Engineering, Quality Control, Rapid Manufacturing, Digital Mock-Up for a variety industries such as aerospace, turbine, automotive, etc.

An Electrical Engineer in the Design Engineer division with an educational background in Electrical Engineering. Experienced in planning and designing hardware such as Programmable Logic Controller (P... Read more

An Electrical Engineer in the Design Engineer division with an educational background in Electrical Engineering. Experienced in planning and designing hardware such as Programmable Logic Controller (PLC) control system panels, low voltage distribution panels, Motor Control Center (MCC) panels, server rack panels, and ATS panels, and Photovoltaic on grid. Responsibilities include creating drawings such as single-line or multi-line diagrams, general arrangement, and installation detail 3D overviews, determining BoQ and BoM for panel design, and during my studies, I gained a deeper theoretical understanding of electrical engineering, learning the working principles of components in AC motor controllers and Inverter. I am very interested in continuously improving my understanding of industrial automation, especially in terms of software and device communication networks. I want to learn more about the development of Industry 4.0. I am ready to face challenges and continue growing in this field. I have a strong track record in understanding control system hardware panels, such as circuit breakers, relays, and PLCs. I am also capable of managing project documentation carefully and thoroughly, ensuring every detail is well-considered.

About Me I am a professional Mechanical Design Engineer with a proven track record of delivering high-precision 3D models and 2D fabrication drawings for industrial applications. My expertise is back... Read more

About Me I am a professional Mechanical Design Engineer with a proven track record of delivering high-precision 3D models and 2D fabrication drawings for industrial applications. My expertise is backed by solid industrial experience, having worked extensively as a specialized conveyor drafter and currently engineering at a well-known Japanese tractor manufacturing corporation. Trained under rigorous Japanese manufacturing standards (JIS/ISO), I focus on structural integrity, mechanical precision, and seamless assembly integration. I help engineering firms, manufacturing workshops, and plant managers transform complex mechanical concepts into production-ready assets. Here is what I bring to your project: • Software Mastery: Advanced 3D modeling and complex top-down assembly in SolidWorks and Autodesk Inventor, combined with precise 2D drafting and plant layouts in AutoCAD. • Conveyor System Design: Comprehensive design of belt, roller, and chain conveyors, including detailed layouts for structural frames, drive units, take-up systems, and chutes. • Full Machine Assembly & Sub-Assembly: Expert handling of large-scale assemblies, incorporating precise constraints, motion analysis, and interference/clash detection to eliminate physical manufacturing errors. • Manufacturing Documentation: Production-ready 2D shop drawings, sheet metal fabrication details, welding symbols, proper tolerances, and fully structured Bill of Materials (BOM). Whether you need a single custom mechanical component modeled, a complex conveyor system designed from scratch, or an existing machine optimized for fabrication, I deliver world-class CAD data tailored to your precise specifications. Let's collaborate to streamline your production and bring your engineering projects to life. Feel free to send a message to discuss your project requirements!

7 years of Experience in Electrical Design. proficient in using eplan for 4 years. Experienced in planning and designing hardware such as Programmable Logic Controller (PLC) control system panels, low... Read more

7 years of Experience in Electrical Design. proficient in using eplan for 4 years. Experienced in planning and designing hardware such as Programmable Logic Controller (PLC) control system panels, low voltage distribution panels (LVMDP), Motor Control Center (MCC) panels, server rack panels, and ATS panels. I can create drawings such as single-line or multi-line diagrams, determining BoQ and BoM for panel design

I am a Mechanical Product Engineer specializing in turning complex ideas into production-ready realities. With deep expertise in mechanism design, advanced material selection, and Design for Manufactu... Read more

I am a Mechanical Product Engineer specializing in turning complex ideas into production-ready realities. With deep expertise in mechanism design, advanced material selection, and Design for Manufacturing (DFM), I ensure your product is optimized for flawless mass production (3D printing,Injection Molding, CNC, Sheet Metal, Tube metal,Etc..). Unlike standard 3D designers, I bridge the gap between aesthetics and physical factories. I provide full parametric CAD models alongside accurate Bill of Materials (BOM) cost estimations to protect your budget. Let’s build your next innovation safely under NDA!

I’m an Automotive & Industrial Design Engineer specializing in Reverse Engineering CAD, Class A Surfacing, and End-to-End Product Development (N2N). I apply Detailed Engineering Design (DED) and Desig... Read more

I’m an Automotive & Industrial Design Engineer specializing in Reverse Engineering CAD, Class A Surfacing, and End-to-End Product Development (N2N). I apply Detailed Engineering Design (DED) and Design for Manufacturing (DFM) principles to ensure every part is aesthetic, functional, and production-ready for injection molding or metal fabrication. With experience in vehicle and industrial product development, I transform ideas and 3D scan data into accurate, manufacturable CAD models. I bridge design and engineering — delivering surfaces and assemblies that are beautiful, precise, and optimized for real manufacturing. Core Skills: -Reverse Engineering (STL/OBJ → STEP/IGES/SolidWorks) -Class A Surfacing & Parametric Modeling -DFM/DED for plastics & metal parts -Technical Drawings (GD&T), BOM, Exploded Views -Rendering & Visualization Tools: AlLIAS, CATIA, Rhino3d, SolidWorks, Fusion 360, Inventor, AutoCAD, Blender, Geomagic, KeyShot, Lumion, Sketchbook Pro Highlights: -Designed and engineered electric motorcycles at Savart Motors (R&D Division) -Delivered numerous reverse-engineered parts and assemblies from 3D scans, 2D Drawing, Rough Sketch -Developed concept-to-production vehicle and product designs for startups and workshops. I focus on precision, manufacturability, and design intent — ensuring clients receive editable CAD, detailed drawings, and reliable engineering documentation. Let’s collaborate to turn your scanned or conceptual ideas into production-ready, high-quality CAD models — ready for tooling, fabrication, or visualization. — Burhan Bani | Reverse Engineering CAD & DFM Specialist

Hello! I am a 3D CAD designer specializing in transforming innovative concepts into functional, highly manufacturable, and real-world products. With advanced expertise in both SolidWorks and Autodesk... Read more

Hello! I am a 3D CAD designer specializing in transforming innovative concepts into functional, highly manufacturable, and real-world products. With advanced expertise in both SolidWorks and Autodesk Fusion, I provide end-to-end design solutions tailored to your specific needs-whether you are a startup needing a rapid prototype or an established company requiring complex mechanical engineering. My Core Expertise Includes: Product Design & Prototyping: Utilizing Autodesk Fusion for fast, flexible conceptualization, consumer product design, and IoT/electronic enclosures optimized for 3D printing. Mechanical Engineering: Leveraging SolidWorks for robust mechanical design, complex assemblies, sheet metal, and structural integrity. Design for Manufacturing (DFM): Ensuring your design is not just visually appealing, but optimized for cost-effective production (3D Printing, CNC Machining, or Injection Molding). Technical Documentation: Providing detailed 2D manufacturing drawings, GD&T, and Bill of Materials (BOM).

Converted a legacy product (no CAD data) into a fully parametric 3D model. Measured and modeled existing assembly using Autodesk Inventor. Generated fabrication-ready DWG drawings and exploded views.... Read more

Converted a legacy product (no CAD data) into a fully parametric 3D model. Measured and modeled existing assembly using Autodesk Inventor. Generated fabrication-ready DWG drawings and exploded views. Prepared material specification list (BOM) and cost estimation. Software: Autodesk Inventor, AutoCAD Outcome: Reduced rework errors and accelerated replacement part manufacturing.

Currently Design Engineer at multinational automotive company (Yamaha Motor) who research and develop new motorcycle for the ASEAN market. I have engineering projects experience since 2019 until the... Read more

Currently Design Engineer at multinational automotive company (Yamaha Motor) who research and develop new motorcycle for the ASEAN market. I have engineering projects experience since 2019 until the present. Success delivers engineering solutions for any sector : • Manufacturing industry • Automotive industry • Oil and gas industry • Plastic and packaging industry • Renewable energy • Food Industry • Consumer goods • Appropriate technology • Robotics and automation • IoT (Internet of Things) I have professional skills and knowledge in Mechanical Design and Manufacturing as below : • Design and produce 3D part & assembly modelling using SOLIDWORKS, NX and CATIA • Produce 2D engineering drawing with GD&T (ASME Y14.5, ISO 1101) and manufacture symbols based on ISO/ANSI/JIS standard using AUTOCAD, SOLIDWORKS, NX and CATIA • Engineering design scope : focusing on vehicle and able to designing special purpose machine, high volume manufacturing, robotics, turbines, piping, structural, home appliances and HVAC/MEP. • Perform with Finite Element Analysis (FEA) to analyst structural and thermal • Perform with Computational Fluid Dynamics (CFD) • Perform with Motion Analysis Simulation • Perform with PLM and PDM managing design data Bill of Material (BOM) • Implement DFM/DFA principles in engineering design • Implement statistical tolerance analysis & MBD used on tight tolerance assemblies • Implement root cause analysis and DFMEA to address design issues • Reverse engineering used on copying existing product for re-engineering and re-manufacturing • Render image, animation and simulation of the products • Quality and testing of the products • G-Code programming using CAD/CAM • Basic electrical and wiring I have other professionals like Speaker, Trainer (Mechanical Engineering CAD) and Jury on Competition. Specialities: • Engineering Design • CAD (Computer Aided Design) • CAE (Computer Aided Engineering) • CAM (Computer Aided Manufacturing) • Reverse engineering • High volume manufacturing methods (Progressive die, Stamping die, Mold and etc.) • Maintenance (Preventive, Predictive and Corrective)

Senior Mechanical engineer specializing in Solidworks, Autodesk Inventor and AutoCAD with strong experience in the cable manufacturing industry. I excel at reading customer requirements, creating accu... Read more

Senior Mechanical engineer specializing in Solidworks, Autodesk Inventor and AutoCAD with strong experience in the cable manufacturing industry. I excel at reading customer requirements, creating accurate Bill of Materials (BOM), designing wiring harness, cable management systems and producing complete shop drawings.

With over 11+ years of expertise in Mechanical Design Engineering, I specialize in delivering high-performance, code-compliant engineering solutions for pressure equipment, storage tanks, and structur... Read more

With over 11+ years of expertise in Mechanical Design Engineering, I specialize in delivering high-performance, code-compliant engineering solutions for pressure equipment, storage tanks, and structural systems. My deep understanding of ASME standards, finite element analysis (FEA), metallurgy, and fabrication procedures ensures that your projects are not only safe and efficient but also fully compliant with international regulations. Whether you need precision design, fabrication-ready documentation, or end-to-end project support, my services are tailored to minimize risks, optimize costs, and accelerate project timelines—giving you a competitive edge in quality and reliability. Why Choose My Engineering Services? ✅ Pressure Vessel & Heat Exchanger Design – Expert mechanical calculations to determine optimal thickness, flange ratings, and material specs, ensuring durability and regulatory compliance. ✅ Storage Tank Design & Optimization – From shell thickness to wind girders and venting systems, my designs enhance structural integrity while reducing material waste. ✅ Fabrication-Ready Drafting & Detailing – High-quality ASME-compliant drawings, including Welding Maps, BOMs, and Dimensional Tolerances, to eliminate fabrication errors. ✅ Piping & Structural Systems – Detailed P&ID-based piping plans, isometrics, and structural skid designs that align with stress analysis for long-term reliability. ✅ Technical Writing & Documentation – Clear, actionable Assembly Plans, Lifting Plans, User Manuals, and Installation Guides that prevent costly mistakes and ensure safe execution. ✅ Project & Proposal Support – From technical bid preparation to on-site troubleshooting, I bridge the gap between engineering and execution, saving time and reducing delays. ✅ Quality Assurance & Compliance – Rigorous adherence to ASME Y14.5, welding standards, and material specifications to avoid rework and ensure certification. Your Key Benefits: 🔹 Reduced Project Risks – My designs and documentation anticipate fabrication challenges, preventing costly rework and delays. 🔹 Regulatory Confidence – Full compliance with ASME, API, and international codes, ensuring smooth inspections and certifications. 🔹 Cost & Time Efficiency – Optimized material selection and constructability-focused drafting to cut unnecessary expenses. 🔹 Seamless Coordination – I act as your technical liaison, ensuring clear communication between drafting, fabrication, and inspection teams. 🔹 End-to-End Support – From concept to commissioning, my expertise covers design, documentation, and execution oversight for flawless project delivery. If you need precision engineering that prioritizes safety, compliance, and operational excellence, let’s collaborate to bring your projects to life—on time, on budget, and beyond expectations.

Manufacturing professional in the wood/furniture industry with 11+ years of experience across factory operations, product R&D, cost engineering, technical drafting, and Bill of Materials (BOM) managem... Read more

Manufacturing professional in the wood/furniture industry with 11+ years of experience across factory operations, product R&D, cost engineering, technical drafting, and Bill of Materials (BOM) management. Proven record leading cross‑functional teams, planning production, controlling costs, and ensuring quality and on‑time delivery. Seeking to contribute as an R&D Manager in wooden door/furniture manufacturing.

Mechanical CAD Designer with professional experience in manufacturing, R&D, and industrial design. Skilled in SolidWorks, AutoCAD, and CATIA for 2D/3D modeling, technical drawings, assembly design, BO... Read more

Mechanical CAD Designer with professional experience in manufacturing, R&D, and industrial design. Skilled in SolidWorks, AutoCAD, and CATIA for 2D/3D modeling, technical drawings, assembly design, BOM creation, and production-ready documentation. Experienced in handling manufacturing drawings, product design improvements, switchboard design, and engineering support for industrial projects. Strong problem-solving and troubleshooting mindset with attention to detail and production feasibility. Currently expanding my expertise in frontend development, Linux systems, and automation technologies to build modern technical and engineering solutions. Skills: SolidWorks AutoCAD CATIA Technical Drawing 3D Modeling Manufacturing Design Product Design Assembly Design BOM Documentation Engineering Support I am committed to delivering accurate, efficient, and high-quality engineering work with clear communication and professional collaboration.

I am a Marine and Electrical Engineer with strong expertise in CAD design (AutoCAD & SolidWorks) and hands-on experience in ship systems, industrial automation, and electrical engineering projects. I... Read more

I am a Marine and Electrical Engineer with strong expertise in CAD design (AutoCAD & SolidWorks) and hands-on experience in ship systems, industrial automation, and electrical engineering projects. I started my career in industrial electrical engineering and automation, working with systems such as PLC,and ABB VSD for process optimization and energy efficiency. Later, I expanded into marine engineering, focusing on ship systems design, mechanical structures, and maintenance. This unique combination allows me to deliver solutions that bridge both mechanical and electrical perspectives in engineering projects. What I can help you with: -2D & 3D CAD Drafting (AutoCAD, SolidWorks) -Marine & Ship Systems Design (piping, machinery, layouts) -Industrial Electrical Design (cable sizing, panel design, equipment installation) -Automation Systems (drives and instrumentation) -Technical Documentation & BOM preparation I am detail-oriented, reliable, and always eager to learn from every project. My goal is to provide accurate, practical, and efficient designs that meet both technical standards and client requirements. Let’s collaborate to bring your engineering ideas into reality. 🚢⚡

1. SUMMARY OF WORK EXPERIENCE 1986-2000 Fourteen year experiences at aerospace industry in the field of Engine and related system. 4 years (1986-1990) as design engineer for fuel system and 10 y... Read more

1. SUMMARY OF WORK EXPERIENCE 1986-2000 Fourteen year experiences at aerospace industry in the field of Engine and related system. 4 years (1986-1990) as design engineer for fuel system and 10 years as a leader of design group since 1990 up to 2000 with wider responsibility to handle Engine mounting, Engine nacelle and engine control system. The job responsible is performed preliminary design, design improvement, managing the job, including control and monitor the job since design phase, fabrication, installation, functional test until certification phase by authority. 2000-2005 Five year experiences (2000-2005) in electronic company_Japan Company as a head of section to manage more than 70 employees. The product is metal component for semiconductor. The process its self is metal forming, trimming and cutting using down set tool with high level precision. The main task and responsible is performed continuous improvement of product quality for company target achievement; control the quality of product to meet customer requirement and product delivery achievement. Perform the manpower management, manpower and fixed asset budgeting. Familiar with Stamping tool, Lean Manufacturing, Kaizen, PPAP, FMEA.. 2005-Present I have been working for 10 years in US Company with field still in aerospace as lead engineer. The designed and jobs that I have craeted and involved: - Pneumatic Ducting for various aircraft - Weld fixture, Vibration Fixture for Duct assembly -C Seal, E seal and Seal forming dies -Weld fixture for Bellows -Stamping dies for diaphragm of Bellows -Lead of saving cost project -Prepare preliminary model and BOM for Bidding. 2. Skill - Expert in in design engineering - GD&T - Very familiar with Process manufacturing ( machining, Forming, Casting, Molding, welding) - Lean Manufacturing

I’m CAD/CAM Mechanical/Mechatronic Design Engineer with routine in 3D CAD/CAM (SolidWorks, ProE Creo, AutoCAD and CNC programming, MasterCAM) Currently I’m designing integrated automation units, cust... Read more

I’m CAD/CAM Mechanical/Mechatronic Design Engineer with routine in 3D CAD/CAM (SolidWorks, ProE Creo, AutoCAD and CNC programming, MasterCAM) Currently I’m designing integrated automation units, custom solutions for mid sized and high output industrial processing and production lines. Designs that combines custom mechanism design, pneumatic, PLC control and fluid dispensing. My proficiency is producing detailed assembly parametric CAD models, industrial components and technology design. I’m used on generating manuals and complex BOM’s, designing solutions from concept to build up and final acceptance, providing end customer technical support. I also posses hands on manufacturing experience in prototyping, CNC programming and machining, sheet metal and die casting. In my career I often performed troubleshooting that requires in-depth product knowledge, repair, billing and shipping, application analysis to recommend appropriate product solution.