Hire Drafting Designers near England, United Kingdom

Mechanical Design, 3D CAD Modeling, 3D modeling, 2D CAD Drawings, 3D Printing. With over 35 years experience in mechanical design, drafting and engineering, covering industries such as computer and co... Read more

Mechanical Design, 3D CAD Modeling, 3D modeling, 2D CAD Drawings, 3D Printing. With over 35 years experience in mechanical design, drafting and engineering, covering industries such as computer and computer related products, mobile phones, automotive and rugged electronics, as well as various other high tech electronic and consumer based products. Over 25 years using 3D CAD including the last 6 years using SolidWorks. 3D printing available using Zortrax M200 and Formlabs' Form 1+ for small prototype, or for just general 3D printed items. Please see www.aardvark3d.co.uk.

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem sol... Read more

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem solving, multi-tasking, prioritising and maintaining peace are what comes naturally. Projects focused on people and planet are held close to heart and are brought to life through a diverse skill set in project management software and creative suites. A multi-disciplinary approach and passion for design has led Mirrin to be an expert in Graphic Design, Illustration, Product 3D Modelling, 3D Rendering and Animation, Architectural and Interior Design, CAD Drafting and Documentation.

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating comp... Read more

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating complex hydraulic control skids for offshore use

I am a Project engineer based in a mechanical engineering environment completing design projects for a range of sectors. everything from Pipework and vessels to brackets and machined components, I hav... Read more

I am a Project engineer based in a mechanical engineering environment completing design projects for a range of sectors. everything from Pipework and vessels to brackets and machined components, I have also worked on one of prototype designs. I can produce designs in both 2D and 3D with the main software being Autodesk based.

I am a mechanical design engineer with more than 10 years experience, specialized in design of new products, machines and equipment for the industry, which realizes from its initial idea to its lead i... Read more

I am a mechanical design engineer with more than 10 years experience, specialized in design of new products, machines and equipment for the industry, which realizes from its initial idea to its lead in production. I use Solid Edge, SolidWorks, AutoCAD LT and Paper to CAD Drafting Engineering 2D Drafting Mechanical 3D Modelling. Design and development of new products from their initial idea to their lead in production. CAD services (3D and 2D), design and development of new and old products. 3D modelling of complicated details and products, solid and surface modelling of 3D virtual prototypes 2D design. Reverse engineering. Plastic parts. Sheet metal.

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural ana... Read more

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural analysis.

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machi... Read more

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machine from concept to prototype, and prototype to commercial product. Designed Ultra High Level vacuum systems, Radiation Shielding, Product Handling, Test Rigs, High Voltage Electrical Enclosures etc. I also work for, and have worked for several multinational engineering corporations developing and automating production equipment, test rigs; and am an registered Incorporated Engineer (I Eng) with the Institute of Mechanical Engineers.

I have been a CAD Technician for a Consulting Civil and Structural Engineering company for coming up 15 years now. I am into all sorts of 2D and 3D design and drawing work. I am very passionate about... Read more

I have been a CAD Technician for a Consulting Civil and Structural Engineering company for coming up 15 years now. I am into all sorts of 2D and 3D design and drawing work. I am very passionate about Designing and Drawing.

I am a Structural CAD Drafter with strong experience in creating accurate 2D AutoCAD drawings. I specialize in structural detailing, technical drafting, and producing clear, construction-ready plans.... Read more

I am a Structural CAD Drafter with strong experience in creating accurate 2D AutoCAD drawings. I specialize in structural detailing, technical drafting, and producing clear, construction-ready plans. I have worked on various structural projects and I am confident in delivering precise and efficient CAD work. I am reliable, detail-oriented, and committed to providing high-quality results for every project.

An organised, confident and motivated draughtsman with 15 years experience in drafting steel, timber and glass structures. Communicates confidently and effectively at all levels and uses initiative to... Read more

An organised, confident and motivated draughtsman with 15 years experience in drafting steel, timber and glass structures. Communicates confidently and effectively at all levels and uses initiative to meet the highest standards. I am extremely skilled at general arrangement and detailed drawings of high specification steel, timber and glass staircases. Specialise in design of unusual architectural metalwork, I have entered my 3d visuals into competitions and publications. I have had work published in several books and magazines, winning various awards for both originality of design and realism.

We are a BIM Modelling and CAD Outsourcing company in UK providing BIM services, CAD Drafting services and MEP BIM co-ordination services in UK. We excel in delivering detailed Architectural BIM Model... Read more

We are a BIM Modelling and CAD Outsourcing company in UK providing BIM services, CAD Drafting services and MEP BIM co-ordination services in UK. We excel in delivering detailed Architectural BIM Modelling and Structural BIM Modelling, Scan to BIM conversion services, MEP BIM Co-ordination, 3D rendering and paper to cad conversion services to a diverse client base across UK and Europe.

My name is Chris Dunn and I am an Industrial Designer with over 18 years industry experience. In that time, I have developed all manner of products for companies in the consumer, marine, gaming, medic... Read more

My name is Chris Dunn and I am an Industrial Designer with over 18 years industry experience. In that time, I have developed all manner of products for companies in the consumer, marine, gaming, medical, industrial and aerospace sectors. I consider the wider needs of your business throughout the design process and understand that product development represents a significant investment in the life of your company. I work with you throughout the process, providing a stress-free and enjoyable experience. Throughout the development cycle, I work closely with manufacturers and other stakeholders to achieve the best possible result while ensuring a seamless flow of product to market. I offer a range of product design services including concept development, 3D solid modelling, rendering and preparation of presentation images, detail design, rapid prototyping and preparation of production documentation. No two projects are the same though, so I always aim to provide a service that is tailored to your individual requirements and budget.

With over 15 years experience working in both architectural and building surveying practices throughout the UK, on projects from simple single storey extensions, to multi-million pound commercial and... Read more

With over 15 years experience working in both architectural and building surveying practices throughout the UK, on projects from simple single storey extensions, to multi-million pound commercial and residential developments, I am well placed to assist you with architectural CAD services for your project, no matter the size. My remote CAD drafting services are provided to both individual clients, as well as ongoing services to architectural professionals, contractors, developers, and teams, across the UK and abroad. My experience includes the preparation of hundreds of project drawings and supporting documents for Planning Applications, Building Regulations, Construction Design & Detailing, Tender Drawings, and 3D Models. In addition to these services, I can also prepare Land Registry Compliant Lease & Title Plans, prepare specifications and construction contract documentation, and advise on The Party Wall etc. Act. My qualifications include a BA (Hons.) degree in Architecture, as well as a post graduate diploma in construction surveying, and I have been a Chartered Building Surveyor for over 8 years, all of which has equipped me with both an understanding of architectural design, and crucially, of the construction technology of buildings, both old and new, including compliance with the Building Regulations. You can find out more by visiting extensionplan.co.uk.

CADEC Limited is an engineering consultancy based in North Yorkshire offering services including Design Engineering, Product Development, Reverse Engineering, Rapid Prototyping (with 3D Printing) and... Read more

CADEC Limited is an engineering consultancy based in North Yorkshire offering services including Design Engineering, Product Development, Reverse Engineering, Rapid Prototyping (with 3D Printing) and Detail Drafting. CADEC Limited support clients across multiple industry sectors, including automotive, agriculture, special purpose machinery, medical, nuclear and consumer products. In recent years CADEC Ltd has completed automotive projects for Polestar – an electric performance car brand, determined to improve the society we live in, the electric London Taxi & Van and supported on a Formula 1 KERS project. Other recent projects include several designs for Infinicut electric mowers and CAD support for Lotus Engineering working on the track bike used by Team GB at the Tokyo Olympics. In addition to projects from major OEMs, CADEC Ltd also support small businesses, entrepreneurs, and private individuals. CADEC Limited has proven expertise in generating and taking concept ideas then developing final engineered solutions utilising parametric 3D models and drawings using industry standard CAD software, such as SolidWorks, Catia V5, Autodesk Inventor, and UGNX. As a full-service consultancy, CADEC’s design expertise and project development skills are provided as a complete package from clean sheet through to production, or for any of the phases in between.

"As an experienced CAD drafter with a passion for BIM technology, I bring a wealth of expertise and a proven track record of success to every project I work on. With over 20 years of experience in the... Read more

"As an experienced CAD drafter with a passion for BIM technology, I bring a wealth of expertise and a proven track record of success to every project I work on. With over 20 years of experience in the industry, I have a deep understanding of the challenges and opportunities that architects, engineers, and construction professionals face every day. My qualifications and experience have prepared me to drive innovation and growth, and I'm committed to playing an instrumental role in shaping the future of sustainable and efficient construction. I'm well-versed in cutting-edge BIM tools and techniques, and I'm excited to help my clients leverage these technologies to achieve their goals. When you work with me, you can expect exceptional results that exceed your expectations and deliver real value to your organization. Whether you need help with drafting, 3D modelling, or 4D visualization, I have the skills, expertise, and commitment to excellence that you need to succeed."

Interior architecture graduate with hands-on experience in 2D drafting, 3D modeling, and photorealistic rendering. I specialize in transforming concepts into compelling visuals for residential and com... Read more

Interior architecture graduate with hands-on experience in 2D drafting, 3D modeling, and photorealistic rendering. I specialize in transforming concepts into compelling visuals for residential and commercial projects, with a cross-cultural portfolio spanning Spain, Egypt, and the UK. Proficient in AutoCAD, 3DS Max, Lumion, V-Ray, and Adobe Suite — I bring precision, creativity, and fast turnaround to every project.

As an independent engineering materials consultant, I offer a consultancy service which can range from attendance at a few meetings to longer term contracts attached to your project. I also offer e... Read more

As an independent engineering materials consultant, I offer a consultancy service which can range from attendance at a few meetings to longer term contracts attached to your project. I also offer engineering design CAD services; aimed at SMEs and start-ups who may not have the capability in-house, but need to produce CAD drawings of components and assemblies for manufacture throughout the project life-cycle. With the flexibility that independence offers, my services can be tailored to precisely what you need, and for how long you need them; making it a  cost-effective alternative to hiring specialists or fixed term contractors. I am happy to quote for complete tasks, an hourly rate, or on a "call-off" contract basis against an overall plan and cost limit. Materials Selection Materials selection should be performed in the earliest stages of the design cycle but is often overlooked, causing project delays with associated increased costs later. Selection of the most appropriate material depends on many factors and several outside the usual parameters of strength, toughness, etc. In product design the main goal of material selection is to minimize cost while meeting product performance goals. Systematic selection of the best material for a given application begins with the required properties.  These should be defined in the Product Design Specification (PDS), with no reference to materials at the PDS stage. For example, a thermal blanket must have poor thermal conductivity in order to minimize heat transfer. Systematic selection for applications requiring multiple criteria is more complex. For example, a rod which should be stiff and light requires a material with high Young's modulus and low density. If the rod will be pulled in tension, the specific modulus, or modulus divided by density, [E / ρ], will determine the best material. These properties also have to be ratified against the cost of the material and available production techniques for shaping and forming. A systematic approach to materials selection will be applied to your project, which will ensure that all design parameters are satisfied while minimising costs to the project. CAD CAD has become the "norm" for drafting in the engineering arena. The advantages of using CAD are numerous, but the key advantages are the flexibility and ease at which new designs can be turned into drawings and existing designs can be modified during the design process.  These make CAD an essential tool in the engineers box. In the product development space, the extended features in modern CAD software are also useful visualise a product. Overall, CAD is a tool for increasing productivity, improving quality, and reducing costs. When combined with Computer-Aided Manufacture (CAM) via CNC machining equipment and, more recently, 3D printing technology, CAD can give a company options to send their model data to suppliers to get things made remotely, with just a phone call or two to confirm details, etc.  This advantage is able to reduce costs by allowing suppliers to be situated anywhere in the world. I have three CAD packages that can be deployed on your project, depending on the project budget.  I use AutoCAD and Salome, the latter used to create meshes for later analysis by FEA. So, depending on your needs, whether it is a one-off paper-design-to-CAD exercise or a longer term product development exercise, I have an efficient solution. FEA For engineering designs, Finite Element Analysis (FEA) is a natural follow-on from CAD. FEA allows the design (or modified design) to be analysed against its performance parameters without the expense of producing working test items. Modern FEA software includes a graphical user interface for model creation, meshing and post-processing.  the calculation engine is usually "hidden" from the user and will require very little interaction, save to check the model parameters and solution accuracy. Load cases can be applied to the design and the response of the component analysed. These analyses can be fed back into the design, which can be modified accordingly. The design - analysis cycle can then be repeated as often as necessary before a working test device or prototype is made. The use of modern CAD and FEA tools makes it very quick and cost-effective to iterate design modifications and analyse them. For FEA, I use "Code-Aster" on a 64-bit Linux platform.  Code Aster is an FEA tool developed and used by French energy company EDF.  It is highly versatile and is capable of numerous post-processing options to allow detailed analysis of your design.

I am a highly efficient, hardworking and skilled design engineer with more than 10 years of experience in Design and manufacturing process. I can design your 3D and 2D cad model as per your requiremen... Read more

I am a highly efficient, hardworking and skilled design engineer with more than 10 years of experience in Design and manufacturing process. I can design your 3D and 2D cad model as per your requirements and ideas. If you need 3D Models, Renderings and 2D drawings created, then you are in right place! I will design 3D models of parts, assembly and drawings depending on YOUR requirements and YOUR ideas. The services I offer include: • 3D modelling , based on your sketches, drawings, pictures, using Solidworks, pro/E , AutoCAD. • Flat patterns of sheet metal parts. • Produce manufacturing drawings based on 3D models and assemblies. • STL files to solid models (STEP, IGS) • Produce DXF files for CNC/Laser/Plasma cutting. • 2D CAD drafting in AutoCAD (architectural and technical drawings, converting from pdf/images to AutoCAD). Satisfaction of clients is my priority on this platform. I am capable because I am confident of my skills. *I look forward to assist you in bringing your imagination into reality*

I am a 30 year old time served tooling engineer who currently works for a large aerospace company, looking to take on some freelance CAD work. I have 12 years experience in both 2D drafting and 3D... Read more

I am a 30 year old time served tooling engineer who currently works for a large aerospace company, looking to take on some freelance CAD work. I have 12 years experience in both 2D drafting and 3D modelling across numerous CAD packages, over a vast variety of jobs ranging from house extensions, architectural metalwork, structural steelwork through to complex mechanical and electrical systems, jig tool, fixture design and work holding. I feel i have the ability to offer the complete package. I would like to think of myself as very professional and somebody who takes absolute pride in his work.

I am a multidisciplinary CAD services specialist providing high quality, professionalism, cost effective and affordable design & draughting solutions. I can offer 2D and 3D CAD Design services using (... Read more

I am a multidisciplinary CAD services specialist providing high quality, professionalism, cost effective and affordable design & draughting solutions. I can offer 2D and 3D CAD Design services using (AutoCAD & SolidWorks) Softwares. I can offer technical drawings, part drawings, assemblies and bill of materials, rendering and animation of the parts or assembly illustrating its design interface and functioning. Services Offered are as follows. - Paper to CAD Conversions - 3D Modelling - Reverse Engineering - CAD Conversions - 2D CAD Drafting - Mechanical Engineering Drawings - 2D Floor Plans elevations. Area Covered: Midlands and Nationwide Work Experience ----------------- Summary: I have 4 years of experience of using 2D and 3D CAD design in manufacturing industry. Having both designed and produced metalwork, I offer services where I understand the actual realisation of products from designs and drawings. Attachment portfolio will provide you better understanding of the kind of projects I've involved in. Solidworks key working areas - 3D Modeling - Photo realist renders - 3D animation and storyboard - Assembly models, drawings, BOMs - 2D sketch, drawings to BS8888 clean and tolerance stacked - Sheet metal - FEA Static Design Validation - Document control (PDM) AutoCAD - Creation of layers - BOM - Manipulate CAD for Data - Floor Plans and Elevations

Mechanical Design Engineer Experience of over five years in design and assembly in manufacturing and aerospace industry. Expert in 3D CAD and 2D design and drafting with experience in packages such as... Read more

Mechanical Design Engineer Experience of over five years in design and assembly in manufacturing and aerospace industry. Expert in 3D CAD and 2D design and drafting with experience in packages such as PTC Creo, Solidworks, NX and AutoCAD.

PRINCE2 Project Manager (Practitioner and Foundation) with 26 years’ experience in numerous industries including Oil & Gas, Manufacturing, Aerospace and Automation, particularly focusing on SME Operat... Read more

PRINCE2 Project Manager (Practitioner and Foundation) with 26 years’ experience in numerous industries including Oil & Gas, Manufacturing, Aerospace and Automation, particularly focusing on SME Operations Management and Design Engineering across UK, Europe, China and the US. Member of the Project Management Institute (PMI). Strong expertise in managing Factory & Office Builds, Capital Equipment Installs, and Bespoke Products, with a background focusing on Metal Component Design and Manufacture(casting/forging/fabrication). Strong expertise using 3D general arrangement drawings to minimize downtime during capital equipment installs.

I am a degree qualified Product Design Engineer with 5+years experience in the automotive industry with a UK renowned bus manufacturer. Part of a new product development team (NPD) that takes a custom... Read more

I am a degree qualified Product Design Engineer with 5+years experience in the automotive industry with a UK renowned bus manufacturer. Part of a new product development team (NPD) that takes a customers spec, provides visualisations, concepts and fully engineers the solution. Previously involved in global projects from London, Hong Kong, Singapore, Toronto. Part of a design team that designed a leading fully electric double decker into the market. My skill set involves the use of Siemens Solid Edge and I can also use Solidworks proficiently.

I am a component Mechanical Engineer with a masters degree from Anglia Ruskin University and I have good and deep experience as a Design Engineer. Currently I am using AutoCAD 2019 and SolidWorks 2020... Read more

I am a component Mechanical Engineer with a masters degree from Anglia Ruskin University and I have good and deep experience as a Design Engineer. Currently I am using AutoCAD 2019 and SolidWorks 2020 for 2D and 3D mechanical design, and Adobe Photoshop CC 2019 for graphic design. I have a good experience in AutoCAD 2006 to 2019 editions, SolidWorks 2006 to 2020 and Adobe Photoshop CS2,CS5 and CC 2019. Services that I can provide, - 3D modelling, - Drafting - Assembling -Rendering - Sheet Metal Design and Drawing - Surfaces - Product Design - Technical Drawing -Graphic Design (logos, banners, business cards, leaflets, posters... etc) Also, I can convert your hand sketchs into AutoCAD or SolidWorks drawings (in 2D and 3D). You can see examples of my previous works in the portfolio section below. In the mean time you can check my website to get to know more about me (www.ekimdenizozen.com). Thank you for visiting my profile!

I`m a CAD enthusiast, with Structural Engineer qualification and 7 years of construction engineering experience, extensive knowledge on drafting structural and architectural drawings with high standar... Read more

I`m a CAD enthusiast, with Structural Engineer qualification and 7 years of construction engineering experience, extensive knowledge on drafting structural and architectural drawings with high standard using AutoCAD.

Arts and Creatives started as a small dream of creative sketches and drawings. The founder Sonda Mvula discovered back in 2009 his love for design and creativity, and decided to further his skills... Read more

Arts and Creatives started as a small dream of creative sketches and drawings. The founder Sonda Mvula discovered back in 2009 his love for design and creativity, and decided to further his skills by studying graphic design, art media and design, and architecture. It was then he recognised his love for design and what was now just a small dream of sketching inspired him to transfer these skills by providing a platform for an architectural design company. Arts and Creatives specialises in architectural concepts and designs, and also works on architectural visualisations and 3D modelling. Using a scope of different methods of designs, such as site analysis, surveying hand sketches, CAD drafting and photography. As a company, we aim to achieve the highest level of design for our clients by creating an excellent planning and innovation project that is tailor made to reflect each of our client’s lifestyle.

Shalin Designs Provide Solutions for CAD Design, Modelling, Conversion, CAD Drafting, Product & Furniture Design company in UK, USA. https://shalindesigns.com/

Shalin Designs Provide Solutions for CAD Design, Modelling, Conversion, CAD Drafting, Product & Furniture Design company in UK, USA. https://shalindesigns.com/