Hire the best freelance Suspension Design expert designers for your company

I'm a mechanical design engineer who has worked in various domains like automotive, automation and new product development. I am confident in the skills that I can take upon a variety of design chall... Read more

I'm a mechanical design engineer who has worked in various domains like automotive, automation and new product development. I am confident in the skills that I can take upon a variety of design challenges and go beyond the expectations of my clients.

Certified CAD designer. Experience of more than three years in Solid-works and ANSYS simulation. worked with SAE organization during Bachelor in Automobile Engineering.

Certified CAD designer. Experience of more than three years in Solid-works and ANSYS simulation. worked with SAE organization during Bachelor in Automobile Engineering.

Over 4 years of experience in design, development,manufacturing and testing of automobiles and its systems. Worked on fields varying from both on and off highway applications.

Over 4 years of experience in design, development,manufacturing and testing of automobiles and its systems. Worked on fields varying from both on and off highway applications.

Passionate Suspension Engineer with 10 years of experience in R&D, Automotive Suspension Design, Design Released Engineer and Structural Engineer. Adept at mastering new technologies, data collection,... Read more

Passionate Suspension Engineer with 10 years of experience in R&D, Automotive Suspension Design, Design Released Engineer and Structural Engineer. Adept at mastering new technologies, data collection, pattern observation, and problem-solving. Proficient in integrating mechanical and electrical/electronic (E&E) devices, with expertise in feasibility studies, architecture, and packaging of transportation systems, especially automobiles. Passionate about developing innovative technologies that benefit businesses, governments, and future generations. Certified Malaysia Automotive Engineer with Board of Engineers Malaysia Registration.

I have good knowledge of 3D Modeling as well as 2D drawing of models with GD&T.I have 4 years of experience in design. I design all 3Dmodels on low charges than competitive market. Highly efficient, s... Read more

I have good knowledge of 3D Modeling as well as 2D drawing of models with GD&T.I have 4 years of experience in design. I design all 3Dmodels on low charges than competitive market. Highly efficient, smart working and talented design engineer Concept development, new product design, manufacturing and construction methods. Experienced in all design stages of a product Development and manufacture including material selection, machining process I had completely worked with SAE projects. I have worked on the projects like SAE EFFICYCLE , SAE BAJA , GOKARTS and SOLAR VEHICLE. Have an experience in robot designing and also the electrical part and basic coding of it.

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but... Read more

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but I also used Catia V5/6 in the academic field. Experience with Matlab as numeric software, and experience with PTC Creo Simulate and Abaqus as FEA Software. During my professional life I have been working on design of racing cars with particular focus on powertrain installation, cooling systems, hydraulic systems, CNC machined components and composite material made components and related jigs and toolings, 3D printed components. Currently working in the food processing industry and involved in the design of industrial machineries and related items (fluid machinery, system's dimensioning and layout design).

I am Currently working as Senior Engineer in Research and Development Team at Vertex Research Centre. Involved in Hybrid Vehicle Development projects for Renault Nissan. Hands on experience in Susp... Read more

I am Currently working as Senior Engineer in Research and Development Team at Vertex Research Centre. Involved in Hybrid Vehicle Development projects for Renault Nissan. Hands on experience in Suspension, Drive shaft and Vehicle Integration Activities

I am an automotive engineer and entrepreneur with a passion for building innovative vehicle solutions. My journey began with Formula Student, where I led suspension and mechanical design for NMMU Raci... Read more

I am an automotive engineer and entrepreneur with a passion for building innovative vehicle solutions. My journey began with Formula Student, where I led suspension and mechanical design for NMMU Racing, competing internationally in Germany. Today, I head ART Suspensions, specializing in performance suspension systems including coilovers, shocks, and air suspension. I bring expertise in CAD, simulation, structural analysis, and manufacturing, combined with hands-on experience in designing and producing high-performance components. What drives me is my love for interesting automotive projects—turning bold ideas into real-world solutions that improve ride quality, handling, and overall driving experience.

Cal Poly: San Luis Obispo Graduate Suspension Design for SAE Baja team Luminaire Fixture Design

Cal Poly: San Luis Obispo Graduate Suspension Design for SAE Baja team Luminaire Fixture Design

I Have total 12 years of experience in product design and development - chassis frame, attachments and suspension design

I Have total 12 years of experience in product design and development - chassis frame, attachments and suspension design

CAD proficiency ( FS car design | FS suspension design along with calculations) Well versed with mechanical concepts | material knowledge

CAD proficiency ( FS car design | FS suspension design along with calculations) Well versed with mechanical concepts | material knowledge

• Skilled in software like Solidworks, ANSYS, ADAMS, MATLAB, Simulink • Designed and validated the complete suspension design for a Formula Student EV car

• Skilled in software like Solidworks, ANSYS, ADAMS, MATLAB, Simulink • Designed and validated the complete suspension design for a Formula Student EV car

Performance-focused Mechanical Design Engineer specializing in off-road vehicle engineering and high-performance modifications. Expert in reinforced chassis systems, suspension design, roll cages, bum... Read more

Performance-focused Mechanical Design Engineer specializing in off-road vehicle engineering and high-performance modifications. Expert in reinforced chassis systems, suspension design, roll cages, bumpers, and structural components engineered for extreme desert environments. Highly proficient in SolidWorks and advanced CAD modeling with strong focus on durability, manufacturability, and strength-to-weight optimization. Skilled in suspension geometry tuning, load analysis, OEM–aftermarket integration, and motorsport safety compliance. Dedicated to delivering high-reliability engineering solutions through precision design, testing, and continuous improvement.

Mechanical Engineering student at VSSUT Burla with hands-on experience in industrial manufacturing (NALCO) and defence R&D (DRDO). I've worked on CFD-based shock wave modelling using ANSYS Fluent,... Read more

Mechanical Engineering student at VSSUT Burla with hands-on experience in industrial manufacturing (NALCO) and defence R&D (DRDO). I've worked on CFD-based shock wave modelling using ANSYS Fluent, regenerative suspension design using rack-and-pinion mechanisms, and studied largescale aluminium casting processes. I'm driven by solving real engineering problems at the intersection of simulation, design, and manufacturing. Currently seeking design/R&D roles where I can apply my skills in CAD, CAE, and mechanical systems.

I am a Lead Mechanical Design Engineer with over 8 years of experience in automotive and vehicle engineering, specializing in chassis and suspension systems, steering, vehicle integration, and mechani... Read more

I am a Lead Mechanical Design Engineer with over 8 years of experience in automotive and vehicle engineering, specializing in chassis and suspension systems, steering, vehicle integration, and mechanical design. I have experience across the complete vehicle development cycle, from initial concepts and kinematic layouts to detailed CAD design, prototyping, manufacturing, and physical testing. My expertise includes: Chassis and suspension design Steering systems and vehicle packaging Mechanical design using Siemens NX, CATIA and Solidworks Vehicle integration and engineering problem-solving Prototype development and testing Technical coordination and design team leadership I also founded an ATV/UTV project and helped develop it from the initial concept to a working prototype, including fabrication, assembly, and testing. I am available for short-term and project-based engineering work, helping companies turn engineering concepts into practical, manufacturable solutions.

I am a professional Mechanical Designer with extensive experience in Automotive Design and Engineering. For 03 years, I have specialized in creating high-precision vehicle components and complex assem... Read more

I am a professional Mechanical Designer with extensive experience in Automotive Design and Engineering. For 03 years, I have specialized in creating high-precision vehicle components and complex assemblies using PTC Creo 10. My expertise includes: Chassis & Suspension Design: Robust mechanical structures for performance and safety. Engine Components: Intricate part modeling with high thermal and mechanical tolerance. Body-in-White (BIW) & Surfacing: Advanced surfacing techniques for aerodynamic and aesthetic vehicle exteriors. Manufacturing Readiness: Optimized designs for Die-Casting, Sheet Metal, and CNC Machining. I focus on delivering designs that are not only visually accurate but also technically feasible for mass production. Whether you need a single mechanical part or a complete vehicle sub-assembly, I ensure top-tier engineering standards.

Experience in the development of Automotive and Industrial Products. Expertise in Transmission, Chassis, Steering, Suspension domains of automotive vehicles. Can provide design support using CAD too... Read more

Experience in the development of Automotive and Industrial Products. Expertise in Transmission, Chassis, Steering, Suspension domains of automotive vehicles. Can provide design support using CAD tools - CATIA V5, CREO & AUTODESK INVENTOR... in Solid, Sheet metal, Castings, Forgings, Assembly & Drafting Modules. I have working experience with clients - VOLVO, JOHN DEERE, CUMMINS, NIMR, MPAC, SIEMENS GAMESA. Have a working knowledge of GD&T.

Designing complex assemblies for manufacture. Previously designed automotive suspension systems, bulk storage solutions and food processing equipment.

Designing complex assemblies for manufacture. Previously designed automotive suspension systems, bulk storage solutions and food processing equipment.

Bachelor’s project 2014, first experience in handling project given me a solid Understanding and unique ability to apply technology in all its form. My contribution was working with the design of Flyw... Read more

Bachelor’s project 2014, first experience in handling project given me a solid Understanding and unique ability to apply technology in all its form. My contribution was working with the design of Flywheel bi-cycle (Used Catia v5), Calculation and Fabrication. At the same time, I worked as a machinery supervisor at a textile company. Gained experience in teaching a new employee to operate machinery, production and process improvements. It was a wide area to spread, within a short span of time I could able to learn and acquire knowledge in this sector. Mechanical engineer in AGRKR Company, Mediator in between MEP and Architect department. My main task is to verify, modifying and implementing a design, maintenance of machinery and installing. It was a challenging experience, developed personally and professionally. Cooperating, decision making, organizing and multitasking are the key personal skills I have developed during this time. During M.Sc., my thesis study on the Development and Simulation of a Suspension system for L7e EV was useful information for the company to initiate their research to the next Level. My thesis includes two Phase which is to find out an ideal suspension system for the Electric Vehicle and study on dynamic behaviour of a suspension system. After my master’s degree, I was working a part-time job in a food company. At the same time, I started developing my skills in CAD Software’s (Creo, Inventor, SolidWorks, etc). whenever I get free time I mostly spend with designing. A design engineer at Alten worked with design and development of outer drone shell. I enjoyed the CAD work, and the chance to take part in a real project. It was a unique experience in applying product development. Used Catia V5 for designing.

I am a Mechanical Design Engineer with over 6 years experience designing and developing steering and suspension components for global automotive suppliers. I have taken products from the design concep... Read more

I am a Mechanical Design Engineer with over 6 years experience designing and developing steering and suspension components for global automotive suppliers. I have taken products from the design concept stage through to design validation, testing and mass production stages.

I am a mechanical design engineer with 13 years experience using PTC proE Creo. For over a decade I have provided engineering services, 2d/3d cad modeling, drafting, GD&T, research & development, and... Read more

I am a mechanical design engineer with 13 years experience using PTC proE Creo. For over a decade I have provided engineering services, 2d/3d cad modeling, drafting, GD&T, research & development, and new product development for large companies like Caterpillar, Komatsu and Oshkosh. I’ve developed new designs for mining truck cabs which included cab doors, plastic panels, sheet metal components, brackets, ROPS, rubber seals and other cab components. Other designs include suspension components for military vehicles, surface modeling, plastic design, castings, sheet metal design and more.