Hire the best freelance SolidWorks EPDM expert designers for your company

I've been extremely fortunate to have worked on a broad array of products in many industries over the course of my career. I've found that my passion is in consumer product development because it requ... Read more

I've been extremely fortunate to have worked on a broad array of products in many industries over the course of my career. I've found that my passion is in consumer product development because it requires thinking deeply about all aspects of the user experience. Thoughtful and elegant design is central to the products I'm most proud to have collaborated on including the Ember Ceramic Mug, iPhone, and Apple Watch. I am an expert in product design and validation. Experienced in complex integrated designs, DOEs, risk mitigation, FMEA, design for manufacturability, and design for reliability. Familiar with a wide array of materials, finishes, and manufacturing processes from composite optical stacks to sheet metal and everything in between.

I help companies design efficient, manufacturable mechanical systems with a strong focus on conveyor systems, fabricated structures, and custom products. With 7+ years of experience working on real i... Read more

I help companies design efficient, manufacturable mechanical systems with a strong focus on conveyor systems, fabricated structures, and custom products. With 7+ years of experience working on real industrial projects, including North American clients, I specialize in delivering designs that are not just visually accurate but fully ready for manufacturing. 🔧 My expertise includes: ✔ Conveyor system design (capacity calculation, belt sizing, motor selection) ✔ 3D modeling & 2D drawings using CATIA & SolidWorks ✔ Fabrication drawings with GD&T ✔ BOM preparation & cost optimization ✔ Design validation and troubleshooting 📈 Results I’ve delivered: • Improved design turnaround time by 20% • Reduced design errors and revisions • Delivered production-ready designs for fabrication I focus on solving real engineering problems — ensuring your design works perfectly in manufacturing and operation. Let’s discuss your project. I can start immediately.

Solidworks Designer / Concept to Final Product Since 2008 working in steel fabrication / sheet metal industry as a Solidworks Designer. My Strengths are: - Concept Design (2D, 3D), Fabrication Detail... Read more

Solidworks Designer / Concept to Final Product Since 2008 working in steel fabrication / sheet metal industry as a Solidworks Designer. My Strengths are: - Concept Design (2D, 3D), Fabrication Detail Drawings, Assembly Drawings, GAs etc. - Bill Of Materials (BOM), Exploded Views. - Solidworks Configurations. - Solidworks FEA - Design Products from Scratch to Final. - Doing FEA of Static Frames / Steel Structures / Lifting Equipment. - Expert in the field of Fuel tanks, Fuel System, Semi-trailers, Six wheel Tipper Trailers, Lowbed Trailers, Gooseneck Heavy Duty Trailers. - Familiar with All Pipe Fittings.

MS Mechanical Engineering | New Jersey Institute of Technology | CAD CAM| FEA CFD | Supply chain management | Robotics and Automation

MS Mechanical Engineering | New Jersey Institute of Technology | CAD CAM| FEA CFD | Supply chain management | Robotics and Automation

Graduated Tallinn University of Technology Masters degree in product development Working in Solidworks Experience in CNC-machining, CAD/FEM

Graduated Tallinn University of Technology Masters degree in product development Working in Solidworks Experience in CNC-machining, CAD/FEM

With over a 10 years of hands-on experience in the intricate fields of product design and development, I am a dedicated Mechanical Engineer specializing in bringing complex mechanical systems from con... Read more

With over a 10 years of hands-on experience in the intricate fields of product design and development, I am a dedicated Mechanical Engineer specializing in bringing complex mechanical systems from conceptual design to successful production launch. My expertise is built upon a foundation of excellence in industry-standard CAD platforms, specifically SolidWorks and AutoCAD. My career has focused on high-stakes engineering environments, providing me with deep technical knowledge in designing and optimizing critical components across several demanding sectors: Aerospace: Designing robust and reliable actuators that meet stringent safety and performance requirements. Industrial Applications: Expertise in developing efficient gearbox systems and intricate valve mechanisms for heavy machinery and process control. I thrive on solving complex engineering challenges and possess a strong command of engineering principles, including GD&T (Geometric Dimensioning and Tolerancing) and DFM (Design for Manufacturability). My approach combines technical precision with strong cross-functional collaboration skills. I excel at working alongside manufacturing teams, project managers, and quality assurance personnel to streamline production processes, ensure design integrity, and consistently deliver superior product outcomes. I am passionate about precision engineering and am always seeking the next challenge where my skills in design excellence can contribute to innovative solutions and organizational growth.

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical drafte... Read more

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical drafter and design engineer. He's held the titles of Designer, Drafter, Project Designer, and Sr. Designer. Tripp also serves on the School board in his community as the Board President. Tripp has been married for 20 years and though he and his wife have no children, they have two dogs and a cat that they consider their children. He enjoys taking his wife and dogs camping in their RV whenever he gets the chance.

Energetic, detail-oriented, and technically proficient mechanical engineer providing skills and experience in mechanical design, 3D Solidworks modeling and drawings, technical writing in regulated ind... Read more

Energetic, detail-oriented, and technically proficient mechanical engineer providing skills and experience in mechanical design, 3D Solidworks modeling and drawings, technical writing in regulated industries, design for manufacturing and assembly, and conceptual design. Adept in mechanical design techniques, CAD modeling, and technical problem solving. Achieved successful design, testing, and verification of capital unit and consumable design from prototyping to product launch on multiple projects.

WORK EXPERIENCE RANGER DESIGN | ENGINEERING DESIGN CO-OP Jan 2017 – September 2017 | Baie-D’Urfe, QC • Created drawings forinstallation guides and engineering changes requested for product enhancem... Read more

WORK EXPERIENCE RANGER DESIGN | ENGINEERING DESIGN CO-OP Jan 2017 – September 2017 | Baie-D’Urfe, QC • Created drawings forinstallation guides and engineering changes requested for product enhancement. • Tracked standard items for projects and engineering changes through resource planning software like, Syteline. • All the CAD changes were done following the industry standards in solidworks. Sheet Metal feature was primarily used to design new parts/prototypes. • Worked on a redesign project of partitions and shelf units for new series of vans. Analysis was done using Solidworks to verify necessary design changes. • Worked on a feasibility study to enhance production and supply chain management. ACADEMIC PROJECTS SYSTEM CONTROLS LABORATORY January 2018 - March 2018 • Modelled a closed loop control system using PID controllers in Matlab Simulink to controlrotary response of flexible joint. • Performance of the system was compared with open loop system and the analysis was throughly documented. BRACKET TOPOLOGY OPTIMIZATION September 2017 – February 2018 • Two similar projects were done on topology optimization using two different analysis software: Abaqus and Solid Thinking. • Redesigned an existing bracket based on given boundary conditions and manufacturing conditions. • Using the analysis software the bracket was optimized for weight and strength alike. AUTOMATIC CASE ERECTOR September 2016 - April 2017 • As part of the Capstone Project, an automatic packaging machine was designed for Hypertec Ciara. • Modelled and designed the pneumatic actuated machine from conceptual phase to final design phase • Stress and deformation analysis were done on the structure using ANSYS, to verify weakness in design and make enhancements accordingly. • Presented feasibility and structural integrity of the design to the client. JET ENGINE ACCESSORY GEARBOX January 2016 - April 2016 • Designed an accessory gearbox following the AGMA standards using Solidworks. • Gear, lubrication and bearing analysis calculations were done using excel and Matlab.

I am a dedicated Electrical Draftsman and Professional Electrician with a passion for transforming ideas into practical, efficient, and safe electrical solutions. Combining hands-on field experience w... Read more

I am a dedicated Electrical Draftsman and Professional Electrician with a passion for transforming ideas into practical, efficient, and safe electrical solutions. Combining hands-on field experience with strong technical drafting expertise, I specialize in creating accurate electrical drawings, layouts, and designs while ensuring projects meet industry standards and client expectations. Known for my attention to detail, problem-solving mindset, and commitment to quality, I take pride in delivering reliable results from concept to completion. My goal is to continuously grow in the electrical industry, contribute to innovative projects, and help power the future through excellence, professionalism, and craftsmanship.

Consulting Snr Engineering CAD Designer Drafter, Design Draughtsman, I am seeking work internationally or within African continent. I am a south African I will need sponsorship visa to work abroad.... Read more

Consulting Snr Engineering CAD Designer Drafter, Design Draughtsman, I am seeking work internationally or within African continent. I am a south African I will need sponsorship visa to work abroad. 20yrs in industry Design, Modelling Shop Detail Research & Design Projects , Prototypes , Tender designs , Reverse Engineering, Back Draft old designs , onsite work hands on. industries: Defence Armored Panzer, Mining ,Structural ,sheetmetal, Civil , architectural, as_built designs, piping isometrics hi - low pressure api, upvc, pvc / hdpe /ms/ss/ asme ,astm, iso, din, bs, plumbing heating water static-portable 20ft - 40ft , mine , filtration , industrial plant layouts equipment , telecom, container tankers, trailers ,sheet metal ,agri ,fmcg, conveyor systems , plant layouts, pid ,pfd , electronics wiring/ hookup/ loop/ wire harness diagrams 2d/3d Autodesk Autocad ,Inventor, 3d Plant, Advanced Steel, Structural Detailer, Revit, Solidworks, Solid Edge, Rhinoceros,Microstation, Draftsite, Pro Engineer, Smart Plant Foundation piping, structures, equipment,pid Designed details and prepared complete and accurate working plans for complex projects piping, electrical, structural, mechanical•Interfaced with departmental staff to identify equipment and materials requirements •Liaised with professionals and clients to agree on project brief and specifications •Determined layout of charts, strength of materials and complex engineering designs •Revised computer-aided designs and plans to comply with modified specifications •Provided technical guidance, design interpretation and direction to drafting staff •Delivered to tight deadlines and ensured strict compliance with quality standards •Coordinated with contractors and client representatives with regards to design changes •Maintained excellent working relations with all site personnel and subcontractors •Created and produced documents of all processes and procedures for the design •Managed and coordinated junior staff and trainees, providing ongoing support •Developed project briefs and monitored progress until final completion of project •Monitored quality assurance, costs and deadlines throughout construction project my contract finishes off 20 November 2021 with MWSPC in K.S.A. Turiaf. if you don't find candidate for my line of industry/work I am available from 2 months notice from period I accept job, contract offer My rates start at R385 to R485/ $25-$35 per hour Mark John Erasmus Consulting Engineering CAD Designer, Design Draughtsman Independant Contractor ,Sole Proprietor of Rockwell Design Mine Technician

My company is designed to provide engineering and drafting services to your company at flat rate cost. We focus on Mechanical, Structural, Metal Fab design and Drafting. Have an idea for an invention?... Read more

My company is designed to provide engineering and drafting services to your company at flat rate cost. We focus on Mechanical, Structural, Metal Fab design and Drafting. Have an idea for an invention? We also produce Patent drawings to get your idea patented and also produce your prototype. Also we will produce shop drawings to have your invention manufactured. Our motto is you think it up. We make it come to life!! If you have any questions or would like to hire our services please feel free contact me for a free quote.

Mechanical Engineer with 8 years of experience in designing and 1 year of experience in testing and composite laminate manufacturing. My journey in this profession has given me great experience in des... Read more

Mechanical Engineer with 8 years of experience in designing and 1 year of experience in testing and composite laminate manufacturing. My journey in this profession has given me great experience in design, redesign, BOM release, BOM maintenance, ECO release, ECO maintenance, 3D modeling, and 2D drafting. I also possess engineering expertise, technical abilities, and knowledge in computer-aided design software. I have successfully designed the “Fuel & Exhaust” subsystem as a design engineer supporting the power-train NPD group for portable screw air compressors. Designed subsystems, components, weldments, Sheet-metal parts, assemblies under various projects for portable screw air compressors, aerial work-platforms & utility vehicles. Executed projects in an integrated environment using Unigraphics NX & Teamcenter, Solidworks & EPDM. I have also played a significant role in project estimation and execution, created a top-level assembly (truck and product integration) with different configurations using lightweight modeling methods (SpeedPak option in Solidworks).

Mechanical Design Engineer with over 11 years of senior-level experience leading complex mechanical and manufacturing engineering projects across multiple industries. Proven track record of driving pr... Read more

Mechanical Design Engineer with over 11 years of senior-level experience leading complex mechanical and manufacturing engineering projects across multiple industries. Proven track record of driving product development from concept through production, mentoring junior engineers, and collaborating across departments to deliver cost-effective, manufacturable, and standards-compliant solutions. Expert in 3D CAD modeling, GD&T, materials specification, and design for manufacturability (DFM).

Mechanical Engineer specializing in the use of AutoCAD and SolidWorks to manage the engineering design process. Experience using, configuring, and testing customized automation and data extraction sof... Read more

Mechanical Engineer specializing in the use of AutoCAD and SolidWorks to manage the engineering design process. Experience using, configuring, and testing customized automation and data extraction software in manufacturing environments. Possessing over 10 years of knowledge with change management standards, concepts, and procedures.

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master... Read more

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master builder. Shortly after, I joined an architectural firm on which I also developed a taste for construction and its intricacies. I was exposed to everything from blueprints to the production of scale models (maquettes). During this time, I also obtained a certificate as a Solar Project Designer through Censolar. I also worked in plumbing designing water systems for irrigation, pools, residential sanitary water, and a few other projects. My interest in design had just begun and there was a long and interesting road ahead of me. Years later in 2003, I moved to the US where I married my wife, with whom I share a beautiful kid. Moving here opened many doors and I dove into these opportunities head first. In 2004 I joined ACC and attained an AA in Mechanical Design, and from then on I have developed upon that skill. My design exposure since moving to the US has been as follows: * National Instruments, involved in virtual instrumentation design. * Alpha Slip Rings, designing custom commutators for oil drilling, radars, etc. * Sisu Devices, robots and industrial automation. * Biomedical design for Global. * Thermal tooling and mechanical solutions design for Intel, CNC machining, and where I also lead the board repair lab.

I am an enthusiastic Application Engineer. I have expertise in Product Data Management. I have implemented SolidWorks EPDM tool for several customers. I have also done CAD implementation at customer e... Read more

I am an enthusiastic Application Engineer. I have expertise in Product Data Management. I have implemented SolidWorks EPDM tool for several customers. I have also done CAD implementation at customer end to improve their design process. I have been involved in consulting customers about improving their current design and data management process more efficient and productive.

Mechanical Engineering Student at ASU. Have been designing items in CAD applications since Freshman year high school. Name what you need done and I can probably do it.

Mechanical Engineering Student at ASU. Have been designing items in CAD applications since Freshman year high school. Name what you need done and I can probably do it.