Hire the best freelance Risk Analysis expert designers for your company

I am a licensed Professional Mechanical Engineer and the founder of Solvify LLC, an independent mechanical engineering consulting firm based in Covington, Washington. I hold a B.S. in Mechanical Engin... Read more

I am a licensed Professional Mechanical Engineer and the founder of Solvify LLC, an independent mechanical engineering consulting firm based in Covington, Washington. I hold a B.S. in Mechanical Engineering from the University of Washington, where I graduated with a 3.89 GPA, and an A.S. in Pre-Engineering from Green River College with a 3.90 GPA. Since founding Solvify in 2025, I have specialized in helping industrial clients in the oil & gas, nuclear, combustion, hydro, and manufacturing sectors tackle complex challenges through design calculations, failure analysis, reliability engineering, and risk-informed design. I bring a strong foundation in thermal-hydraulic and fluid system analysis, combined with practical experience in codes and standards such as ASME B&PV, B31.1, and B31.3. Before starting my own firm, I gained valuable experience across research, operations, product development, and large-scale engineering projects. At TerraPower, I worked as a Fluid Systems Design Engineer on a first-of-a-kind sodium fast reactor, where I developed thermal-hydraulic models, supported nuclear licensing efforts, wrote technical reports, and mentored other engineers. Earlier, as a Gas Products Engineer and Product Technical Lead at Algas-SDI, I led design projects for propane vaporizers, conducted FMEAs, developed capacity calculation tools still used by the sales team, and drove product improvements that enhanced reliability while meeting UL and ATEX requirements. My background also includes hands-on power plant operations at the University of Washington’s steam plant and published research in knot theory. This combination of deep technical analysis, manufacturing and operations experience, and leadership allows me to deliver practical, high-impact solutions that improve safety, reliability, and performance for my clients. I am deeply passionate about helping my clients succeed by delivering engineering solutions that are not only technically sound but also practical, reliable, and aligned with their real-world operational goals. My goal is always to leave clients with stronger systems, greater clarity, and the tools they need to perform effectively long after the project ends.

I am a self-driven mechanical designer with a strong foundation in mechatronics and advanced mechanical design, developed through hands-on practice and real industrial projects. I have nearly one year... Read more

I am a self-driven mechanical designer with a strong foundation in mechatronics and advanced mechanical design, developed through hands-on practice and real industrial projects. I have nearly one year of professional experience at a company specializing in rubber processing machinery, where I contributed to the design and development of machines such as Open Mixing Mills, Sigma Mixers, and Banbury Mixers. Throughout this experience, I worked extensively with SolidWorks to design mechanical systems and metal components, with a strong focus on manufacturing constraints, tolerances, and assembly logic. I am comfortable designing parts intended for machining, welding, and industrial assembly, and I have a solid understanding of mechanical fits and tolerancing practices. In addition to industrial machinery design, I have experience with 3D printing and rapid prototyping, enabling efficient design validation and a practical design-for-manufacturing mindset. I am particularly interested in remote mechanical design work, where I can deliver reliable, detail-oriented solutions while continuing to grow as a mechanical designer.

Digital development projects, in which I took the initiative, resulted in increased teamwork, higher quality, fewer errors, and rationalization gains.

Digital development projects, in which I took the initiative, resulted in increased teamwork, higher quality, fewer errors, and rationalization gains.

With a Master's degree in Construction Management from the National Institute of Technology, Warangal, I specialize in helping clients bring their projects in on time and under budget. My expertise li... Read more

With a Master's degree in Construction Management from the National Institute of Technology, Warangal, I specialize in helping clients bring their projects in on time and under budget. My expertise lies in advanced project controls, specifically using Primavera P6 for detailed scheduling and BIM for accurate 4D and 5D analysis. I provide remote services for small-to-mid-sized firms that need to streamline their pre-construction and execution phases without the cost of hiring a full-time expert. My goal is to transform your project data into actionable insights, ensuring you have clear visibility on costs and timelines from the start.

Mechanical Designer | SolidWorks & Risk Analysis Specialist | 2D/Paper to 3D Conversion Mechanical Designer with many years of experience in the development and engineering of industrial components,... Read more

Mechanical Designer | SolidWorks & Risk Analysis Specialist | 2D/Paper to 3D Conversion Mechanical Designer with many years of experience in the development and engineering of industrial components, machinery, and systems. I use advanced SolidWorks software to manage the entire design cycle, integrating 3D modeling with rigorous risk analysis to ensure product safety and full regulatory compliance. In addition to developing new projects, I modernize technical archives by converting from 2D to 3D and reconstructing parametric 3D models from paper drawings. My work is based on two fundamental pillars: the highest quality of technical details and rigorous punctuality in meeting agreed deadlines. Key Services and Skills: Industrial Mechanical Design: Advanced 3D modeling, complex assembly management, and 2D drafting in SolidWorks. CAD Conversion & Digitization: Transform 2D drawings (DWG/DXF) and old paper drawings into production-ready parametric 3D models. Risk Analysis: Technical assessment and risk analysis in compliance with machine safety directives. Quality and Punctuality: Optimization of components for production, maximum detail accuracy, and compliance with delivery times.

Civil engineers typically do the following: Analyze long range plans, survey reports, maps, and other data to plan and design projects. Consider construction costs, government regulations, potential... Read more

Civil engineers typically do the following: Analyze long range plans, survey reports, maps, and other data to plan and design projects. Consider construction costs, government regulations, potential environmental hazards, and other factors during the planning and risk-analysis stages of a project.

Innovative and detail-oriented Mechanical Design Engineer with over 7.5 years of diverse experience in medicaldevice development and NPD. Proven expertise in design validation, risk analysis, toleranc... Read more

Innovative and detail-oriented Mechanical Design Engineer with over 7.5 years of diverse experience in medicaldevice development and NPD. Proven expertise in design validation, risk analysis, tolerance stack-ups, andSustenance engineering. Contributed to the development of multiple patented medical devices with a strongunderstanding of technical documentation, cross-functional collaboration, and global stakeholder management

Established professional providing:- Project management services for Oil & Gas and Energy construction projects | Structural design, Analysis and Detailing | Project Scheduling and progress tracking o... Read more

Established professional providing:- Project management services for Oil & Gas and Energy construction projects | Structural design, Analysis and Detailing | Project Scheduling and progress tracking of construction and O&M works | Project Management of Scope, Time, Quality, and Cost | Resource Management | Risk evaluation, assessment and management || Primavera P6 Professional EPPM Expert || AutoCAD | Revit | Civil 3D | ETABS | Robot Structural Analysis| Primavera Risk Analysis

Strong analytical and problem solving skills. Experience in designing of complex industral machinery equipment in the field of sorting, packaging and classifying fruits and vegetables. Experience in... Read more

Strong analytical and problem solving skills. Experience in designing of complex industral machinery equipment in the field of sorting, packaging and classifying fruits and vegetables. Experience in designing products for people with mobility impairments. Experience in technical documentation (writting manuals, risk analysis, reports, presentations etc.) More than 10 years of experience in Research and Development. Experience in project managmanet. Bachelor's degree in Mechanical engineering. Master's degree in Material Science. PhD in2D materials (Graphene in particular).

Skilled in packaging and product design with hands-on experience across furniture, stone, and consumer goods. Proficient in AutoCAD, Autodesk Inventor, Illustrator, SAP, and Excel for technical design... Read more

Skilled in packaging and product design with hands-on experience across furniture, stone, and consumer goods. Proficient in AutoCAD, Autodesk Inventor, Illustrator, SAP, and Excel for technical design, data management, and workflow optimization. Experienced in product quality inspection, e-commerce catalogue management, and marketing material design. Strong foundation in ISTA packaging standards, risk analysis, and lean design principles. Awarded two student scholarships and served as English Club leader, building leadership and communication skills.

Himanshu is an engineering graduate from NIT Raipur, one of the premier engineering institutes in India, with 7 years of technical experience in Solar PV. His experience ranges from bidding, project a... Read more

Himanshu is an engineering graduate from NIT Raipur, one of the premier engineering institutes in India, with 7 years of technical experience in Solar PV. His experience ranges from bidding, project acquisition, capex analysis, opex analysis, risk analysis, site audit, concept design, detail design, technical specification, BOQ preparation, weather assessment, yield estimation, till post-commissioning technical support for ground-mount & roof-top projects in APAC (India, Malaysia, Japan, Indonesia etc). He is currently an independent consultant providing techno-commercial consultancy and training in the field of Solar PV for clients in India and abroad.

My main responsibilities to design and model parts of machines or even complete machines in different scales, related to mechanical engineering field, using different CAD software such as: SolidWorks,... Read more

My main responsibilities to design and model parts of machines or even complete machines in different scales, related to mechanical engineering field, using different CAD software such as: SolidWorks, Autocad, and ANSYS Workbench. I am also familiar with valve design, industrial processes, heat exchanges, pressure vessels, risk analysis,non-destructive testing,asset integrity,renewable energy design and 3D modeling. I always strive to clearly understand my customer's needs before starting any project to make sure we are aligned on what the final product should be. I look forward to our first conversation

I have 5 years of industry experience as a mechanical engineer specializing in fluid and thermodynamics, design using SolidWorks and Autocad, manufacturing techniques and modeling. I always keep relev... Read more

I have 5 years of industry experience as a mechanical engineer specializing in fluid and thermodynamics, design using SolidWorks and Autocad, manufacturing techniques and modeling. I always keep relevant codes and standards into consideration. I am also familiar keep relevant codes and pressure vessels, PSV's, risk analysis, non-destructive testing, asset integrity, renewable energy design, and 3d modeling. I always strive to clearly understand to clearly understand my customer's needs before starting any project to make sure we are aligned on what the final product should be. I look forward to our first conversation about your next project

I´m mechanical design engineer with 1000+ finished projects and 12 years of experience in automotive industry as a Leader of design team, At the moment also freelancing for you ! :) - one purpose de... Read more

I´m mechanical design engineer with 1000+ finished projects and 12 years of experience in automotive industry as a Leader of design team, At the moment also freelancing for you ! :) - one purpose devices and machines design. Small devices, small machines, semi-automatic machines, fully automated lines. - industrial design, rendering, motion/FEA/Thermal simulations, animations Tasks: - 3D concept development from customer specification/cost offer - 3D detail design - project leading ( CATIA, SOLIDWORKS, NX, SOLIDEDGE ) - 2D documentation - production/assemblies/maintenance plans - project/budget/timeline supervising - CAD standartization, libraries, catalogues, development of macros with software designers ( CATIA, SOLIDWORKS ) - production/suppliers coordination, ordering - machinery safety responsible - CE declaration, risk analysis - process automation - sensorics/machine vision tests - machine testing, commisioning, release to production

Experienced Mechanical Engineer | CAD & Simulation Expert I am a highly skilled Mechanical Engineer with over 10 years of experience in mechanical design, project management, and system engineering.... Read more

Experienced Mechanical Engineer | CAD & Simulation Expert I am a highly skilled Mechanical Engineer with over 10 years of experience in mechanical design, project management, and system engineering. My expertise lies in armored vehicle design, powertrain & driveline systems, suspension engineering, and military-grade mechanical solutions. I have worked on major defense industry projects, including main battle tanks, armored personnel carriers (APCs), infantry fighting vehicles (IFVs), hybrid & electric military vehicles, and unmanned systems. Key Skills & Expertise: ✔️ 3D CAD Design & Engineering: CATIA V5, AutoCAD, PTC Windchill ✔️ Structural & Mechanical Analysis: Ansys, RecurDyn, MATLAB, Simulink ✔️ Product Development & System Integration ✔️ Vehicle Dynamics & Performance Optimization ✔️ Prototyping, Testing & Validation ✔️ Project Management & Risk Analysis I have a strong background in military standards (MIL-STD, STANAG, ITOP, NATO, IEEE) and experience working with international defense contractors. I am passionate about delivering high-performance, durable, and cost-effective mechanical solutions. Let’s connect and discuss how I can contribute to your next project!

Program Management & NPD Leadership: End-to-end ownership of Rubber, LSR, and Plastic component programs from RFQ through SOP, including feasibility, DFM, tooling, validation, and post-SOP change trac... Read more

Program Management & NPD Leadership: End-to-end ownership of Rubber, LSR, and Plastic component programs from RFQ through SOP, including feasibility, DFM, tooling, validation, and post-SOP change tracking, governed through APQP, PPAP, DFMEA, DVP, and SPC. - Product Design: Hands-on design expertise in UG-NX12 and CATIA V5, covering 3D modelling, 2D drawings, GD&T, and CAE result interpretation, across exterior/interior trims, powertrain acoustic components, and EV battery-thermal parts (venting valves, hydraulic connectors). - Cross-functional & Program Leadership: Experience leading CFT teams, managing cost/budget/risk analysis, supplier development, and customer-facing program delivery for global automotive and EV platforms. with a demonstrated history of working in the automotive industry. Skilled in Design devlopment of various components such as exterior Trims, Interior Trims and Power train accoustic parts and Polymer Parts Tool Design and Geometric Dimensioning & Tolerancing, Product Design, UG Nx 12, Automotive Engineering, and CATIA V5 R26. Strong operations professional with a B E mechanical engineering focused in Mechanical from Visvesvaraya Technological University

* Piping designer/engineer with experience in conceptual, basic, and detailed engineering projects within the oil, gas and mining industry. Participation in multidisciplinary meetings, preparation and... Read more

* Piping designer/engineer with experience in conceptual, basic, and detailed engineering projects within the oil, gas and mining industry. Participation in multidisciplinary meetings, preparation and review of technical documents and drawings such as design criteria, pipe thickness calculation, bill of materials, specifications of construction, welding, hydrostatic test, coating, painting, firefighting systems, key plan, plot plan, detail and elevations, isometrics, as well as modelling and presentation of equipment and piping in 3D model using PDS Equipment & Piping, AutoCAD Plant 3D, Cadworx, SmartPlant Review and Naviswork. * Segregation and stress analysis of piping using Caesar II, criteria design of stress, loads evaluations of supporting and equipment’s nozzles. * Active involvement in field activities, such as field surveying, piping pre-commissioning, and work in the technical office on construction sites, responding to requests for information (RFI), reviewing and approving designs, optimizing pipe routes, and providing solutions for design and engineering challenges. Expertise in occupational risk analysis and safety work authorization, supervision of activities in confined spaces such as excavations. * Proficient in Python, HTML, CSS, JavaScript, AutoLISP, and Visual Lisp for implementing routines and scripts to enhance daily tasks.

• Over 8 years of experience in Computer Aided Design (CAD) & CAE which include design and analysis of Machining, Casting, Die cast, sheet metal & injection molding plastic products. • Failure mode e... Read more

• Over 8 years of experience in Computer Aided Design (CAD) & CAE which include design and analysis of Machining, Casting, Die cast, sheet metal & injection molding plastic products. • Failure mode effect analysis (FMEA) & Risk analysis to anticipate problems and design processes and products to reduce risks. • To do stack up analysis for the calculation of tolerance for critical dimensions. • To generate good quality mesh to reduce solution time and to achieve accurate result using meshing tools. • Retrieve and modify CAD model of medical devices components, generate tetrahedral, hexahedral FE mesh to define structural domain • To perform structural, linear & non-linear, Static & Dynamic FEA analysis of components to assess and /or modify structural design of these components to meet the design requirements. • Low-cycle fatigue (LCF) & High-cycle fatigue (HCF) calculation. • Identify and confirm model set-up and boundary conditions, execute analysis and post-processing of FEA results. • Participate in product design and development teams and regularly present analysis results to engineering peers and management. • Document analysis objectives, conclusions, results, and assumptions using a standard report template. • Modify design based on the interpretation of analysis results. • To calculate factor of safety to minimize the prototype iteration and validate the FEA result with hand calculation. • To design testing fixture for physical design life testing of products and created test report as per the IEC 60601 third edition compliance. • To do design for manufacturing analysis for mechanical components & interact with international supplier for DFM and modify design to reduce manufacturing cost without compromising the functionality of product. • To create parts and assembly drawings, bills of materials, detailed drawings for machining, assembly and quality inspection as per ASME standards.

I am a mechanical engineer with strong expertise in mechanical product development and agricultural machinery, currently working as a Design Engineer at AGCO. I specialize in the design and optimizati... Read more

I am a mechanical engineer with strong expertise in mechanical product development and agricultural machinery, currently working as a Design Engineer at AGCO. I specialize in the design and optimization of feederhouse and residue management systems for Fendt IDEAL and Massey Ferguson combine harvesters, using Creo Parametric and Windchill for 3D CAD modeling and product lifecycle management. My work incorporates Design for Manufacturing (DFM) principles, Top-Down Design methodology and Geometric Dimensioning and Tolerancing (GD&T) standards, contributing to robust and cost-effective product solutions. My technical background includes thermal and mechanical calculations, fluid simulations CFD, Finite Element Analysis - FEA, failure analysis, DFMEA, PLC programming, P&ID design, sensor specifications, integration and comissioning and risk analysis HazOp. I also have hands-on experience in design, maintenance engineering, commissioning, and inspection of thermal systems such as steam boilers, pressure vessels, biomass conveyors, and industrial fans, as well as experience with steel structures in industrial environments. In the Oil & Gas and Offshore Engineering sectors, I worked as a Technical Manager, Contracts Manager and Responsible Engineer, leading maintenance projects for plate heat exchangers and printed circuit heat exchangers on Petrobras platforms (P66 to P69). I also gained experience with thermal machine manufacturers, including steam turbines and centrifugal and reciprocating compressors. Currently, I am pursuing a Master’s degree in Mechanical Engineering at UFRGS, focusing on energy efficiency and combustion simulation in porous media burners. My research involves Computational Fluid Dynamics (CFD) using ANSYS Fluent and the Flamelet Generated Manifold (FGM) technique to model laminar flame propagation in porous structures. I also hold a Master’s in Industrial Automation and Control Engineering, and a technical degree in Mechatronics. My goal is to integrate advanced simulation tools, robust engineering design, and real-world project management to deliver innovative, sustainable, and high-performance solutions across the agriculture and energy sectors. Beyond my professional life, I am an amateur rugby player for Charrua Rugby Clube, competing in championships such as the SUPER 12 (the first division of the Brazilian Rugby XV Championship) and the Gaúcho Rugby XV Championship.

I joined the Instituto Superior de Engenharia de Coimbra in 2008, with a degree in Mechanical Engineering (post-Bologna). Concludes, at the same institution, the Master in Mechanical Systems and Equip... Read more

I joined the Instituto Superior de Engenharia de Coimbra in 2008, with a degree in Mechanical Engineering (post-Bologna). Concludes, at the same institution, the Master in Mechanical Systems and Equipment in 2013, in a total of 5 years of academic career. Associativism was not left out: I joined the Orxestra Pitagórica and was a founding member of the Tuna Académica of the institution where I studied (ISECOTUNA). I was awarded two FCT Research Grants, one in 2013 which focused on the mechanical properties of composite materials, combined forces and interlaminar fracture, another in 2014 in the context of the structural integrity of aeronautical light alloys (propagation of fatigue cracks, overloads, crack closure phenomenon and its measurement by DIC – Digital Image Correlation). I was involved in the Vehicle Transformation Industry, in an ambitious project called TecLife, where I played the role of Production Engineer during a year of great growth and maturation for the company. I continued to work in the automotive area, belonging to the logistics team at Gestamp Vendas Novas, an international group dedicated to the design, development and manufacture of metallic components and assemblies for the automotive industry, with Volkswagen Autoeuropa as its main customer. Given the scope of projects in which I was involved, I acquired solid knowledge in terms of Supply Chain Management, having followed an intense period of growth in production activity, industrialization and adjudication of new projects, always following the Industry 4.0 model. I also played the role of Project Designer at SIRMAF, where I was responsible for the construction project and conversion of special robotic machines for the automotive industry. I also prepared 3D and 2D CAD, specifications, instruction manuals, risk analysis, preventive maintenance tables, etc. I also developed methods and time optimization projects at Paul Stricker, and actively participated in the training of new employees. After some accumulated experience, I continued to develop my career as a Designer Designer at Indusstock, where I was also responsible for the production department. I am currently part of the Riatrónica team, being the Mechanical Project Manager.

I’m an experienced product design engineer with a focus in the development of medical and consumer products. I worked at design consultancies for over 16 years, focusing on all kinds of very challengi... Read more

I’m an experienced product design engineer with a focus in the development of medical and consumer products. I worked at design consultancies for over 16 years, focusing on all kinds of very challenging projects.. Although I could tell you I like making things that improve people’s lives (which is true), and I'm passionate about engineering... I feel that’s a bit cliche. I decided to transition to freelance engineering because I know product development is challenging and complicated. I wanted to both make it more accessible to more people trying to get a product off the ground, as well as support teams when they are really in need of some help. Check out my Website and Portfolio at catinella. com Product development is hard work. Timelines are always tight, teams are always taxed, budgets can be thin, there are many late nights, and it can be very challenging to get a product launched. I wanted to directly help folks by providing some of my time, so they can get back some of theirs. - I'm skilled in identifying user requirements, managing budgets and schedules, conceptual engineering and feasibility, prototyping, testing, risk analysis, tolerance analysis, verification and validation, regulatory compliance, and new product launch. - I've lead small 2-4 person teams to large multi-disciplinary 14-20+ person programs consisting of human factors specialists, industrial designers, mechanical, electrical, software, and quality engineers. - I've developed a broad range of products from consumer and electronics products, to medical devices, to automation and robotics, to industrial processing systems. - I've navigated challenging technical problems through a process of breaking the problem down, identifying risks, asking appropriate questions, and mitigating risks to acceptable levels for moving forward. Some of my primary skills include: Brainstorming/Ideation Concept Sketching Concept Synthesis Project Management Issue Identification Risk Identification FMEAs Hazards and Risks Assessments CAD Development Drawings Development Analysis/Simulations Technology Research IP Analysis Prototyping Test Planning Requirements Definition Component Selection System Conceptualization System Architecture Design Cost Assessments Component Selection Electronics Integration Early Supplier Involvement Prototype Tooling Qualification Testing Low Volume Builds High Volume Builds Tolerance Analysis Design Refinement Supplier Selection Design for Manufacture and Assembly Cost Reduction Verification Testing Design Controls Supply Chain Development Assembly line setup IQ/OQ/PQ Build Instructions Pilot Builds Validation Testing Change Management Quality systems Design Controls ISO 9001 / 13485 / 14971

Well-developed skills in communication, problem solving and creative thinking. • Used to team work but have the ability to work without supervision. • Extensive product development experience from c... Read more

Well-developed skills in communication, problem solving and creative thinking. • Used to team work but have the ability to work without supervision. • Extensive product development experience from concept, manufacture through to market. • Experience designing mass process machinery for all sectors of industry including Automotive, Aerospace, Nuclear, Pharmaceutical, Life Sciences, Mining and Medical. • Jig and fixture design, mould design (injection, compression and thermoforming), sheetmetal development and fabrication design. • Pneumatics – Circuit design, component specification and supplier recommendations. • Conversant in ISO9000, BSI 8888, FMEA,DFMEA, DMAIC, APQP, PPS GAMP, Hazard and Risk assessment, PD5500 and PED requirements. • Experience with Microsoft Word, Excel, Project, Visio, PowerPoint, Sage, SAP and Baan. • FEA experience and Flow Simulation (Solidworks Simulation) • Design for Manufacture (DFM) methods. • Extensive CAD experience AutoCAD (14 years), Pro-Engineer/Creo (9 years), SolidWorks (18 years), Solid Edge (6 years), Siemens NX (2 years), Inventor and CATIA V5.

gineering consulting for complex technical problems, new product concepts, mechanisms, energy systems, and industrial projects. My work includes mechanical and structural analysis, strength and load... Read more

gineering consulting for complex technical problems, new product concepts, mechanisms, energy systems, and industrial projects. My work includes mechanical and structural analysis, strength and load assessment, reliability and failure analysis, heat-transfer and thermal-system analysis, engineering design review, materials selection, manufacturing feasibility, DFM, and technical risk assessment. I can review existing designs, drawings, calculations, prototypes, and technical concepts; identify weaknesses and risks; recommend practical improvements; and prepare clear engineering reports and technical opinions. I am particularly interested in complex projects where the client needs an independent engineering opinion rather than routine drafting. I can support inventors, product developers, manufacturers, engineering companies, and investors from the initial technical idea through feasibility assessment, design review, manufacturing preparation, and technical documentation. My current independent engineering work includes the analysis of advanced LNG-based cooling and energy systems for AI/HPC data centers, including cryogenic cooling, closed-loop nitrogen thermal storage, mechanical backup systems, energy integration, reliability, and safety. I also provide technical analysis of inventions and patent-related engineering documentation

Mechanical Systems Design & FEA Consultant | Systems Engineering | Sustainable projects | Renewable Energy | Services You Can Offer Mechanical Systems Design: System architecture, concept developmen... Read more

Mechanical Systems Design & FEA Consultant | Systems Engineering | Sustainable projects | Renewable Energy | Services You Can Offer Mechanical Systems Design: System architecture, concept development, equipment integration, 3D CAD modelling, mechanical assemblies, design optimisation, and detailed engineering. FEA & Structural Integrity: ANSYS, Abaqus, stress analysis, fatigue assessment, structural integrity evaluation, and design verification. Piping & Plant Design: AutoCAD Plant 3D, piping system design, equipment integration, piping layouts, and isometric drawings. Renewable Energy & Desalination: Mechanical systems for renewable energy applications, seawater reverse osmosis (SWRO) systems, equipment integration, and technical problem-solving. Engineering Verification & Validation: Design reviews, verification and validation documentation, failure investigation, root-cause analysis, and engineering risk assessment

I’m an Industrial Engineer specialized in CAD modeling, technical drafting and building envelope thermal analysis. I work with clients across different stages of a project — from early concepts to fu... Read more

I’m an Industrial Engineer specialized in CAD modeling, technical drafting and building envelope thermal analysis. I work with clients across different stages of a project — from early concepts to fully defined components — providing accurate 2D and 3D CAD models, technical drawings and engineering support as needed. Whether the input is a sketch, a PDF, a set of drawings or an existing part, I translate it into clean, reliable geometry ready for manufacturing, documentation or further development. I use Rhino, Fusion 360, AutoCAD, SketchUp and Blender depending on the requirements of each project. My focus is always on delivering consistent, well-structured files that integrate easily into real workflows. My CAD work typically includes: 3D CAD modeling from drawings, sketches or reference images Generation of 2D technical drawings from 3D models PDF to CAD conversion (DWG / DXF) Reverse engineering of mechanical and industrial components Preparation of models for manufacturing or 3D printing In addition to CAD work, I provide specialized building envelope thermal analysis using THERM. My work is focused on real construction details and includes: U-value calculations for wall, roof and floor assemblies Psi-value (thermal bridge) analysis for junctions and details Thermal bridge modeling for construction details Condensation risk assessment This type of analysis is typically used for energy compliance, performance evaluation and optimization of building systems. I usually work based on ISO standards and validated material properties when manufacturer data is not available, ensuring technically consistent and usable results. I’ve worked on mechanical components, industrial parts, casting patterns and building envelope details. I take a straightforward approach: clear communication, precise execution and reliable delivery. If you need CAD modeling, technical drawings or thermal analysis, feel free to reach out.

I am a graduate Mechanical Engineer, pro-active & multi-skilled professional extending rich corporate experience of 7 years in Mechanical & Structural Designs,Pipeline Engineering, Asset integrity & C... Read more

I am a graduate Mechanical Engineer, pro-active & multi-skilled professional extending rich corporate experience of 7 years in Mechanical & Structural Designs,Pipeline Engineering, Asset integrity & Condition Monitoring ,Risk-Based Inspection, Non-Destructive Examination & Evaluation, Corrosion Engineering in oil/gas, Petrochemical, and power/process industries.

Experienced mechanical design engineer delivering robust, manufacturing-ready solutions for high-value projects. Expert in SolidWorks and AutoCAD for precision CAD and engineering documentation, A... Read more

Experienced mechanical design engineer delivering robust, manufacturing-ready solutions for high-value projects. Expert in SolidWorks and AutoCAD for precision CAD and engineering documentation, ANSYS for FEA-driven validation and design optimization, and KeyShot for executive-level product visualization. Strong experience in DFM/DFA, risk reduction, and performance-critical design from concept through production. I help clients reduce engineering risk and production costs through validated, manufacturing-ready mechanical design. Trusted by clients for accuracy, technical depth, and reliable delivery.