Hire the best freelance RACK PIPING expert designers for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I have almost 7 years ofexperience in piping disigning industry. i know PDMS ,SP3D , PDS,AUTOCADE,MICROSTATION,EXCEL

I have almost 7 years ofexperience in piping disigning industry. i know PDMS ,SP3D , PDS,AUTOCADE,MICROSTATION,EXCEL

Hi ! I'm an Electronics Design Engineer holding a Master's degree in Electrical Engineering with +2 years of experience. I had some experience in designing PCBs and RF/microwave and millimeter-wave c... Read more

Hi ! I'm an Electronics Design Engineer holding a Master's degree in Electrical Engineering with +2 years of experience. I had some experience in designing PCBs and RF/microwave and millimeter-wave components (filters, antennas, diplexers...). Most of my experience comes using the following software: Kicad, EasyEDA, Altium, ADS, CST, and HFSS. --------- Recently, I have worked on the design of an RF transmitter (PCB board) for RFID reader; The broad consist of: Antenna; Bandpass Filter; Power Amplifier; Oscillator... I also participated in working on a development of new charger. I have experience in using measurement tools for RF components such as VNA and oscilloscope. I have published three book chapters and two articles in international journals. - Programming: C++, VHDL, Java, MATLAB, Familiar with Python.

• Seven (7) years of solid experience in telecommunication industry as Radio Network Optimization Engineer and Design&Planning Engineer for WiFi, WiMAX/LTE (4G Network), WCDMA(3G Network), GSM(2G Netw... Read more

• Seven (7) years of solid experience in telecommunication industry as Radio Network Optimization Engineer and Design&Planning Engineer for WiFi, WiMAX/LTE (4G Network), WCDMA(3G Network), GSM(2G Network). • Experience in analyzing the KPI's (key performance indicators) traffic statistics and monitoring the network for troubleshooting on daily basis. • Experience in Wifi Design&Planning Engineer. • Experience in Wifi Integration Engineer. • Knowledgeable in different Network Optimization and Planning Software(IBWave, OPTIs-WiMAX, TEMS Investigation 13 and 15, NEMO Outdoor 7.5, Nemo Handy, Agilent Technologies, TEMS 10 Investigation, GENEX Probe, PHAROS DM, AutoCad 2016),and Post-Processing Softwares(ATOLL,ACTIX Analyzer, MAPINFO Professional, PHAROS Analyzer, NEMO Analyzer) and Microsoft Office applications (MS Word, MS Excel, MS Power point, MS Access, MS Outlook),. • Experience in Wifi Cisco Router. • Knowledgeable in different Wifi Tools(Cisco Router, Edgecore Switch, Site Audit and Survey Tools (Handheld GPS, compass, digital camera, crimper binoculars, and inclinometer). • Highly motivated, ambitious, hardworking with commitment to excellence

IPC CID+ certified PCB designer. Flex, rigid-flex, RF, analog and high-speed. Any layer count - any technology. Mil/Aero and ITAR. 30+ years experience

IPC CID+ certified PCB designer. Flex, rigid-flex, RF, analog and high-speed. Any layer count - any technology. Mil/Aero and ITAR. 30+ years experience

1. Embedded Hardware Skills - Eagle,Orcad schematic and PCB Design 2. VLSI Design - Analog Design using Cadence virtuoso 3.RF and Antenna Design using ADS, HFSS 4. Four Years of Experience With Master... Read more

1. Embedded Hardware Skills - Eagle,Orcad schematic and PCB Design 2. VLSI Design - Analog Design using Cadence virtuoso 3.RF and Antenna Design using ADS, HFSS 4. Four Years of Experience With Masters Degree 5. Several Embedded,RF,VLSI Industrial Projects successfully driven

I’m a freelance analog, RF/Microwave design engineer offering PCB Services. I have purchased my own copy of Altium Designer (PCB software) and Sonnet Professional (RF/Microwave electromagnetic softwa... Read more

I’m a freelance analog, RF/Microwave design engineer offering PCB Services. I have purchased my own copy of Altium Designer (PCB software) and Sonnet Professional (RF/Microwave electromagnetic software. Together I design any type of planar RF or Microwave filter, mixer, directional coupler, 90 degree hybrid, and more. I also own my own microwave laboratory with the capability to provide turnkey solutions - design, schematic capture, layout, and test. Contract me directly at Straight RF, LLC. I’ve worked in Silicon Valley for 25 years as an analog design engineer specializing in RF/Microwave/mmW as well as some digital and firmware. My past includes architecture design of radio systems, point to point and spectrum analyzers (see the front cover of the 2004 May issue of Microwaves & RF). Most recently, I’ve spent time in RFIC design designing inductors, baluns and transformers for silicon CMOS on 28nm, 40nm and 65nm nodes. David

I have 5.9 Years experience as Piping Design Engineer in Chemicals/Petrochemicals/Oil &Gas industry. Key strengths reviewing P&ID’s, Equipment Layout, 2D study 3D modelling (SP3D,E3D,AutoCAD) Preparin... Read more

I have 5.9 Years experience as Piping Design Engineer in Chemicals/Petrochemicals/Oil &Gas industry. Key strengths reviewing P&ID’s, Equipment Layout, 2D study 3D modelling (SP3D,E3D,AutoCAD) Preparing Piping Layout, Extraction of isometric, Material Take-off, Equipment’s Detailing and Drawing Pipe Support Modelling, Preparation of GA drawing Equipment’s/Structure, Pipe Rack, Bill of material etc. • SP3D • AUTOCAD • NAVIS WORK (FOR REVIEW) • MICROSOFT WORD • MICROSOFT EXCEL • REVIT • Study of a plant layout. • Equipment modelling on Smart Plant 3D. • Piping modelling on Smart Plant 3D. • Resolve Piping Clashes in model by clash report. • Preparation of tentative line routing and preparation of isometrics for MTO calc. • Checking of 3D model using Navis Works Freedom. • Extraction of isometrics by Smart Plant 3D. • Isometric Preparation and checking. • Incorporation of isometric comments. • Extraction of Piping General Arrangement Drawing (GAD). • Preparation of piping layout as per the system requirement using plot plans P&ID. • Structure modelling. • Structure modelling for piping support. • Calculation of pipe, elbow, component, valves, fitting etc for material take off purpose. • Checking and giving comment on P&ID. • Pipe Rack modeling. • Nozzle projection of vessel, column, tank, pump etc. • Study and modelling of pump piping, Filter piping, Air cooler piping, Heat exchanger piping, vertical column piping, Rack piping, • Pipe support modelling • Calculating Piping MTO • Isometric and M.T.O generation • Model Review Tag closer • To Do List Error clear in SP3D • G.A.D extraction

I have AutoCAD 2D and 3D intermediate skill, I used to draw piping lines, simple beam structure, rack, fence, etc.

I have AutoCAD 2D and 3D intermediate skill, I used to draw piping lines, simple beam structure, rack, fence, etc.

Professional AutoCAD Draftsman with strong experience in water treatment plants, industrial piping, and mechanical layouts. I have hands-on expertise in AutoCAD, AutoCAD Plant 3D, P&ID drafting, pipin... Read more

Professional AutoCAD Draftsman with strong experience in water treatment plants, industrial piping, and mechanical layouts. I have hands-on expertise in AutoCAD, AutoCAD Plant 3D, P&ID drafting, piping layouts, isometrics, tank drawings, and equipment arrangement. I have worked on municipal and industrial water treatment projects including RO systems, pressure vessels, storage tanks, pump rooms, all type of fabrication, and pipe rack layouts. I focus on accurate drawings, clean layers, correct standards, and fast delivery. I am reliable, detail-oriented, and committed to providing high-quality CAD drawings that meet client and project requirements.

Hi, I am a mechanical engineer having expertise in piping field. I can help you with plant design, piping study preparation, overall plant layout preparation, equipment layout prepatation, pipe rack... Read more

Hi, I am a mechanical engineer having expertise in piping field. I can help you with plant design, piping study preparation, overall plant layout preparation, equipment layout prepatation, pipe rack study preparation, Nozzle Orientation preparation, Material take off estimation, proposal estimation, 3D model review and Isometrics.

I'm mechanical engineer from Indonesia and temporary stay in Japan, I have beed finished some project drawing such as 3d drawing for piping line, pipe rack, mechanical part, mechanical equipment, etc.

I'm mechanical engineer from Indonesia and temporary stay in Japan, I have beed finished some project drawing such as 3d drawing for piping line, pipe rack, mechanical part, mechanical equipment, etc.

I am a mechanical engineer and independent consultant specialized in piping stress analysis, pipe vibrations, pressure vessel design, and steel structures for industrial plants. I support EPC contract... Read more

I am a mechanical engineer and independent consultant specialized in piping stress analysis, pipe vibrations, pressure vessel design, and steel structures for industrial plants. I support EPC contractors, engineering firms and plant owners on complex projects in the oil & gas, gas transmission, chemical and energy sectors, from greenfield plants to revamping and troubleshooting. My expertise covers piping and pipeline stress analysis according to ASME B31 (power, process, liquid and gas pipelines, hydrogen) and European codes such as EN 13480 and EN 1594, including slug flow, support design and piping–structure interaction. I also design and check pressure vessels and heat exchangers to ASME VIII Div.1 and EN 13445, as well as service and pipe rack steel structures based on Eurocodes. I have hands‑on experience with many international projects (LNG regasification, gas compressor stations, CO₂ and H₂ pipelines, carbon black plants, refrigeration packages, slug catchers, fertilizer and petrochemical units), often working in English‑speaking environments and multidisciplinary teams. Typical scopes include flexibility and nozzle load checks, vibration and pulsation assessment (API 618), lifting analyses, skid and support verification, feasibility and revamping studies. Main software: CAESAR II, Bentley AutoPIPE Advanced, STAAD.Pro, PV Elite and FEA tools (Salome‑Meca / Code_Aster, NozzlePRO). I am a member of ASME and regularly attend specialized courses and conferences on vibrations, finite elements and forensic engineering. I deliver clear calculation reports, ready for client and authority review, and I am used to working remotely for international clients.

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowle... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

 Good experience of P&ID, PFD, Piping layout, Equipments layout, Plant sections, Pipe rack & its Section, Master plan, Key plan, Plant Evacuation layout, Isometric Drawings, Sketch from site, As buil... Read more

 Good experience of P&ID, PFD, Piping layout, Equipments layout, Plant sections, Pipe rack & its Section, Master plan, Key plan, Plant Evacuation layout, Isometric Drawings, Sketch from site, As built, HVAC Drawing, Airflow Diagram, Pressure vessel, Reactor, H.E, Storage Tank, Column, Rotating Equipment, Mechanical drawing, and detailed drawings that are based on information provided by engineers and customers.  Supervision of Piping, structure erection and equipments installation work of various projects carried out by contractors of ground field and green field projects.  Handling team of contract workers and work distribution, measurement of work done.

Asian Engineering Company was established in 2004 in Pune. Company is dealing with the Engineering of the different sections of Oil & gas, Chemical, Petrochemical, Fertilizer, Power and Process pl... Read more

Asian Engineering Company was established in 2004 in Pune. Company is dealing with the Engineering of the different sections of Oil & gas, Chemical, Petrochemical, Fertilizer, Power and Process plants. Company is dealing with following sections of engineering of plants: Company is having good experience of working in above mentioned categories. The objective of Asian Engineering is to provide cutting edge engineering solutions to Industry. Asian Engineering has good reputation amongst its clients due to its technical expertise and good resources in hand. CORE BUSINESS ACTIVITIES • Skid Mounted compressor Package Detailing • Skid Mounted Chilling plant detailing • Compressor Piping Layouts. • Civil Loading details. • Pressure vessel design (ASME Section VII Div I, CE, GEP, using PV ELite) • Atmospheric Storage tank design (API-650) • Piping Stress Analysis. • Structural detailing (pipe rack design & piping supports) • Piping GA for Critical and Non critical lines • Power Piping, Process piping and water treatment piping. • Isometrics with detailed drawings with Bill of material. • Boiler Pressure parts & Non Pressure part detailing, Riser & downcomer • Project Documentation. RESOURCES OFFICE FACILITIES: 1. AREA • 1000 Sq Ft 2. HARDWARE • COMPUTERS - 13 NOS. • PRINTERS 2 NOS. 3. SOFTWARE MECHANICAL ENGINEERING • PRESSURE VESSEL & TANK PV-ELITE. • STORAGE TANK DESIGN IN-HOUSE MADE PROGRAM IN EXCEL. • PIPING MODELING SP3D 2009 & PDMS-12. • P & I DIAGRAM SPPID & AUTOCAD-12 • STRUCTURAL & CIVIL DESIGN STAAD PRO. • 3D MODELING OF STRUCTURE TEKLA. 4. PIPING ENGINEERING • PIPING STRESS ANALYSIS CAESAR-II 5.1 5. PROJECT MANAGEMENT • MICROSOFT PROJECT 6. DRAFTING • MANUFACTURING DETAILED DRAWINGS AUTOCAD LT 12. 7. OFFICE AID • MICROSOFT OFFICE 8. COMMUNICATION • TELEPHONES / FAX / E-MAIL MANPOWER DESIGN ENGINEERS PIPING ENGINEERS DRAUGHTSMAN ADMINISTRATION OUR PRESTIGOUS CLIENTS • Thyssen-krupp Industries • Thermax Limited • Praj Industries Limited • Forbes & Company Limited Mumbai. • Nath Chemical Limited Vapi • ChandanTech Solution Pune • L & T Vadodara • Prothious engineering services • Meru Industries Bhosari. WORK PROFILE 1. Piping-Critical Non Critical: Asian Engineering have done piping design of Chemical plant and boiler piping which starts from P & ID and includes Layouts, Orientations, Piping GA, Piping Isometrics, Pipe Rack Drawings, Piping Model using 3D tools like PDMS/ Propipe, Line Lists, valve lists, Material Take offs, Interconnecting drawings, foundation drawings, CLD, Pipe support drawings. 2. Stress analysis: We have expertise in Stress Analysis using CAESAR-II 5.1 as a tool. We have references of completed projects for Stress Analysis for Boiler Steam & Turbine Piping. 3. Power Piping: We have done Boiler piping for various projects of Thermax, Praj Industries Ltd and Forbes & Company Limited. We are having experience in steam piping including PRDS Control stations, Condenser piping of Boiler etc. 4. Pressure Vessel Design and Design of Storage tanks: Asian Engineering does have expertises for Pressure vessel design as per ASME VII div I, Div-II and CE marking requirement. We have done designing of pressure vessel using PV Elite software as well. We have experience of designing Atmospheric tanks as per API-650. 5. Structural Design: Asian Engineering has completed number of projects for structural design and detailing. 6. Detail Engineering and Process Documentation: As per above experience and available expertise we have capability to do the detail engineering of the Compressor Package, Chemical and Fertilizer, Distillery plants, Boilers plants and others We have prepared good level of documentation for these projects. This documentation done based on specific requirement from clients. This is the reason why Asian Engineering can be a preferred Engineering Partner.

I am a Mechanical Design Engineer and CAD Designer with hands-on experience in SolidWorks, AutoCAD, and Fusion 360. I specialize in 3D CAD modeling, product design, mechanical assemblies, engineering... Read more

I am a Mechanical Design Engineer and CAD Designer with hands-on experience in SolidWorks, AutoCAD, and Fusion 360. I specialize in 3D CAD modeling, product design, mechanical assemblies, engineering drawings, sheet metal design, and manufacturing-ready documentation. I have worked on industrial and mechanical design projects including plant layouts, piping rack planning, structural components, sheet metal products, and fabrication drawings. My experience also includes creating GADs, BOMs, detailed manufacturing drawings, and designs for CNC laser cutting and fabrication. I hold a Bachelor's degree in Mechanical Engineering and focus on creating accurate, practical, and manufacturable designs that meet client requirements and industry standards. I am committed to delivering high-quality CAD work with attention to detail, dimensions, functionality, and ease of manufacturing.

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspecti... Read more

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspection using 7 QC tools. ➔ Inspected product designs prior to use and producing the product as per customer recruitments. ➔ Preparing PPAP documents and maintaining logs for management to review. ➔ Investigated in-process non-conformance and effectively determined the scope of the non-conformance and configured NCR reports. ➔ Communicated to peers, manufacturing and maintenance personnel and taking preventive action using WHY-WHY analysis. ➔ Performing JH activity and maintaining 5S while using work habits. ➔ Documented and presented the machine non conformances and products failure in Quality TPM. ➔ Attending customer complaints and preparing 8D reports. Additional Technical Qualifications : ➔ PDMS Pipe modeling as per P&ID and study piping including necessary line slopes, instrumentation, valves and special purpose items. ➔ 3D modelling of Equipment, pipework, Structure, Draft, isodraft in PDMS. ➔ Pipe rack and expansion loop design. ➔ Piping material specification and valve data sheet. ➔ 3D modelling of Support Modelling using MDS. ➔ Preparation of material specification and MTO. ➔ Pressure design of pipe and components. ➔ Wall thickness, branch reinforcement &PT rating etc. ➔ Flexibility analysis of piping systems. ➔ Stress intensification factor calculations. INDUSTRY KNOWLEDGE : ➔ International design codes & dimensional standards. ➔ ANSI/ASME, API, BS, ASTM & their use in design & analysis. ➔ PFD & P&ID drawing, process equipment & plant layout Statutory bodies & regulations. ➔ Geometric Dimensioning & Tolerancing.. ➔ Production Part Approval Process (PPAP). ➔ Total Productive Maintenance (TPM). ➔ Manufacturing Engineering. ➔ Root Cause Analysis. ➔ ISO Standards.

With nearly a decade of hands-on experience in cruise ship design, I specialize in creating efficient, buildable solutions for complex systems within machinery spaces. My work is grounded in a solid u... Read more

With nearly a decade of hands-on experience in cruise ship design, I specialize in creating efficient, buildable solutions for complex systems within machinery spaces. My work is grounded in a solid understanding of ship construction - from the keel up - which enables me to design with both functionality and feasibility in mind. I focus on the detailed design and 3D modeling of piping, ducts, cable trays, machinery layouts, foundations, lifting arrangements, exhaust systems, sea and tank connections, gratings, and pipe rack modules. One of my key strengths is routing these systems in extremely confined spaces - finding practical solutions where space is limited and precision is critical. My background in IT allows me to streamline and optimize the design process through automation, especially for repetitive tasks. I’m passionate about CAD and parametric design, and bring strong proficiency in tools such as Microstation and Intergraph Smart 3D. I'm also quick to learn new software and adapt to evolving workflows. I understand the demands of shipbuilding: efficiency, accuracy, and coordination across disciplines. My goal is always to deliver designs that are not only technically sound, but ready for production, reducing rework and delays at the yard. As a strong advocate for decarbonization and renewable technologies, I look forward to contributing to a more sustainable future for the maritime industry - bringing together solid engineering, smart tools, and forward-thinking design.

V.A. SOLUTION FIRM NAME : - VINAYCHANDRA ADHVARYU OFFICE ADDRESS : - 101,SHAYMDARSHAN APPT,... Read more

V.A. SOLUTION FIRM NAME : - VINAYCHANDRA ADHVARYU OFFICE ADDRESS : - 101,SHAYMDARSHAN APPT, B/H WARD NO-6 OFFICE, AKOTA-390020. GUJARAT INDIA CONCERN PEOPLE: - Mr. VINAY N ADHVARYU. CONTACT NO. :- ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ E-mail I.D. :- ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ MECHANICAL ENGINEER 45 YEARS EXP. CHEMICAL ENGINEERS 45 YEARS EXP. PIPING DESIGNER 2 NOS 30 YEARS EXP MECHANICAL DRAUGHTSMAN 3 NOS 8 YEARS EXP. (Mr. VINAY N ADHVARYU) TECHNICAL Since its inception in 2010 V.A. SOLUTION has distinguished itself as a leader in Engineering service provider. With extensive experience covering various industries like Oil and Gas, Fertilizers, Hydrocarbons, Chemicals, Pharmaceuticals, Dairy, Steel structural, MEP, EQUIPMENTS, ISOMATRIC workshop detailing in M.S, S.S., Rubber, P.V.D.F. lining P&ID, equipment layout plan and elevation, storage tank layout, piping layout of OFSITE storage tank and pipe rack always offered best and in time services provider. Our comprehensive services include: 1. Design & Detailed Engineering: We excel in comprehensive engineering services in fields of as Piping, still-Structural, & Mechanical and others. 2. Professional/Professional Solutions: Our customized professional solutions, offered on an ongoing or ASBUILT projects. 3. AS-Built Plant Drawings & 2D Job Work: Our skills include creating AS-Built Plant drawings and including P & ID, PFD, GAD, Isometric, Equipment, and more the solution of the. Process Engineering Mechanical Engineering Process Flow Diagram based on Material Balance & Energy Balance Up gradation and finalization of P & I Diagrams & Line List Pipe Size & Pressure Drop Calculations Basic Equipment Layout Instrument process data sheet Process Data sheets for Static & Rotary Equipment Thermal Design & Rating of Heat Exchanger Process Equipment Simulations Preparation of mechanical data sheet for all static equipment such as vessels, tanks, heat exchangers, distillation columns etc. for design calculation(if it is required ) Mechanical Design for Static Equipment as per ASME, BS, IS, TEMA Codes using PV Elite Software.( BY VENDOR) Mechanical Design for Storage Tanks as per API, BS, IS Codes.(BY VENDOR) Preparation of GA & fabrication drawings. As per your final design data sheet of pressure vessel, reactor, receiver, ST. tank, distillation column, ect. Piping Engineering Development of Equipment Layout Piping layouts Isometric drawings for pipes MTO for Piping Civil (client Scope Drawings for Civil) and Structural Engineering Design & detail fabrication deg. with MTO Piping supports layout with details and BOM Equipment sizing and specifications (MCC, Motor, HT/LT System etc.) Preparation of Single line diagram Drafting and Digitization At VINAYCHANDRA N ADHVARYU, will produce a wide range of drafting services for our clients. Using software like AutoCAD we can convert all paper drawings into accurate multi-layered AutoCAD drawings. These services are rendered by a drafting team working in coordination with our engineers to create all types of As-Built drawings, mechanical, piping, and process engineering drawings with complete details. an experienced mechanical & chemical engineer, I'd love the opportunity to put my skills and expertise to work on your pipeline design and detaling layout project. OUR PRESTIGIOUS CLIENTS ARE: - . INDUSTRIAL PLANT & PIPING ---------------------------------------- (BOMBAY) ADVENT ENGINEERING PVT. LTD.------------------------------------ (BOMBAY) LUPIN LABORATORY(THROUGH R.J. ASSOCIATES)------------------(BOMBAY) NESTLER BOILERS --------------------------------------------- (BOMBAY) PROJECT TRCHNOLOGIEST PVT. LTD. ------------------------------- (BARODA) HEUBECH COLOUR PVT. LTD. ---------------------------------------- (BARODA) NEW FILED INDUSTRIAL EQUIPMENT PVT. LTD.-------------------- (BARODA) J.K PETROCHEMICALS PVT. LTD.-----------------------

I am a Senior Fire Protection Engineer with 18+ years of experience in fire protection, firewater and piping engineering for industrial, commercial and high-hazard facilities. I specialize in fire pr... Read more

I am a Senior Fire Protection Engineer with 18+ years of experience in fire protection, firewater and piping engineering for industrial, commercial and high-hazard facilities. I specialize in fire protection system design, engineering calculations, hydraulic analysis, BIM coordination and technical documentation in accordance with international and Indian standards including NFPA, FM Global, BIS/IS and applicable project specifications. My Core Expertise 🔥 Fire Sprinkler Systems NFPA 13 sprinkler system design Hazard classification and design criteria Sprinkler selection and spacing Hydraulic calculations ESFR and storage protection Rack storage sprinkler systems Sprinkler layout and riser design 💧 Firewater & Hydrant Systems NFPA 14 standpipe/hydrant systems Firewater network design Fire hydrant and hose reel systems Hydraulic calculations Firewater demand calculations Pipe sizing and network optimization 🚒 Fire Pump Systems NFPA 20 fire pump selection Fire pump room layout and piping Suction/discharge piping Jockey pump systems Fire pump test header and flow-meter arrangements Pressure sensing and control systems Fire pump hydraulic requirements 🔥 Deluge / Water Spray Systems NFPA 15 water spray systems HVWS/MVWS systems Transformer protection Conveyor protection Deluge valve systems Spray nozzle selection and hydraulic calculations 📐 Engineering & BIM AutoCAD fire protection drawings Autodesk Revit MEP Navisworks coordination 2D/3D model review Clash detection P&ID and schematic development Fire protection equipment layouts Fire pump room layouts 📊 Engineering Deliverables Basis of Design Design calculations Hydraulic calculation reports Equipment sizing BOQ/MTO Technical specifications Datasheet review Design review and compliance assessment Fire protection layouts and schematics Industry Experience My experience includes projects involving: Oil & Gas LNG / Gas Facilities Petrochemical Plants Semiconductor Facilities Data Centres Pharmaceutical Facilities Warehouses Industrial Facilities Electrical Transformer Protection Codes & Standards I have extensive working experience with: NFPA 13, NFPA 14, NFPA 15, NFPA 16, NFPA 20, NFPA 72, NFPA 2001, NFPA 318, FM Global, BIS/IS standards, NBC and applicable international engineering practices. Software AutoCAD | Autodesk Revit | Navisworks | PipeNet | SP3D | MS Office What I Can Help You With I can support clients with complete fire protection engineering or individual engineering deliverables, including design, calculations, drawings, BIM modelling, technical review and documentation. I am particularly interested in long-term remote engineering support and part-time projects where my senior-level fire protection and piping experience can add value. My objective is to provide technically sound, code-compliant and practical fire protection solutions with clear engineering documentation and timely delivery.

KALEEM SHARIFF Over 25 years experience in reputed Organization as Engineer Designs in various level and different companies Wide exposure and hands on experience in design and development, Rev... Read more

KALEEM SHARIFF Over 25 years experience in reputed Organization as Engineer Designs in various level and different companies Wide exposure and hands on experience in design and development, Reverse engineering, Tool designs, Product Design and prototyping, Machine design and development, Material handling equipment, Sheet metal and Plastic design & development, Production planning, Wood Working using CNC & conventional machines and Design process using 2D and 3D CAD. High level of adaptability since have worked in different areas. A result oriented, initiator and go-getter with proven track record. I have depth knowledge on Design & development, Planning and Out sourcing, Manufacturing, Project execution, production planning, Vendor developments etc Professional Experience : More then Fifteen years experience in CAD & its related activities. Having wide exposure on - Solid Edege V3 to V20 and ST - Solid Works - UG NX2 - Auto CAD. - ZW CAD 2D and 3D - Archicad 9 - Microstation, Intelli CAD, Tourbo CAD, Cadlab-2005 - 3Dsmax and Maya - Flash Wide Exposure and hand on experience in Part Modeling, Assembly Modeling, Sheet metal modeling & development, Welding , Drafting, Piping, wiring for Panels, kinematics solution & Checking interference, Geometrical Tolerance Design Process, Tool Designs, Product Designs, I am good in project management and 2D & 3D drawings as per IS & ISO Standards. Experienced in Virtual Prototype modeling, Simulation, Animation & Manufacturing process using 3D CAD & Reverse Engineering. Some of the recent successful completed Projects SERVICE KIOSK: Design & develop and proto type of service Kiosk enclosures and system engineering for Banking and others like Ticket collecting at the parking places etc. (successfully completed) SOLAR TRACKER: Design and develop of single and two way tracking of solar energy for mono cells and HCPV cells using actuator and motor. (successfully completed) SWITCHES: Touch screen switch enclosure and higher end touch switch for houses and hotels (successfully completed) ELECTRIC BOOSTER: Design and develop it is like small SPM using lever mechanism etc. HAND HELD COMPUTER: Enclosures like plastic molding and system design (successfully completed) NET WORKING, SERVER RACKS AND CONTROL PANELS: Design development of full range of rack and control panels including cable manager etc (successfully completed) DBR systems for Railway: Indigenous design and develop (successfully completed) Kiosk for Games Using different material like CRCA, SS, Wood, FRP, etc (successfully completed) DEVELOPMENT OF FURNITURE: OFFICE FURNITURE : - Modular Work Station - Discussion Table - Conference table - Full height Partition - Height adjustable Table - Height adjustable monitor - Storage (metal and wood) - Etc RETAIL FURNITURE (using sheet metal) - Wall units Gondola - Island Gondola - Aligator Stand - Display racks - Shop fitting fixtures - Mobile store Fixtures - Cash counters - Etc. HOUSE FURNITURE - Modular kitchen - Bed room furniture - Etc SCHOOL FURNITURE HOTEL FURNITURE NET WORKING RACKS AND CABLE TRAYS LADDERS ETC. DEVELOPMENT OF - Auto mobile Components - Indexing unit for milling machine - Oval turning unit - Sachet making machine - Printer enclosures - Electrical Capacitor - Electrical panel - Electrical & Electronic enclosures - Fire alarm enclosure - Plastic switches - Electronic Product Designs - Encoders - SPM Machines for Textile and other Industries - Jigs & Fixtures and Cutting Tools - Press Tools - Industrial Gauges - 3D Model for 3D axes machine - Development for Automation unit Like Plastic Sealing unit, Drilling and Tapping unit attachment to machine etc and developed also for other machines (Reduce man power , increase the Production and Quality) - Cutting Tools like Form Tool, Drills, End Mills etc – 3D model for 5D axes Tool Grinding machine WATCHES : - Developed new watch movement and checked all parameters - 3D modeling of new watch cases & Rapid prototype - Development of Digital and Analog Watches - Packing boxes for Watches (higher end and lower cost) MEDICAL EQUIPMENT: - Dental Chair - Auto Clave - Operation theatre equipment - Syringe Pump - Testing Unit (Blood, Urine etc) PRODUCT DESIGN AND DEVELOPMENT - Furniture Designs - Service Kiosk for Banking and other sector - ATM Machine - Fire Alarm box - Floor Boxes - Seat for Bus & Bus Interior - Ultraviolet unit for Medical purpose - Water filterer and Mobile water purifier - Development of Garden lamp & Fountain Lamp (Water proof with IP65) - Water Filter and Electronic Level Indicator - Table water Purifier - Mobile Water Filter - Development of Electronic sensor for motors (Mechanical Parts including Plastic and sheet metal Components and also tool design for the same components) - Chassis for UNO Console - Hand Held computers - Net working racks Reverse Engineering Projects : - Caulking machine - Oval turning unit - Automobile Components - Collapsible doors - Operation theatre equipment - Indexing unit - Reverse Engineering of SPM for textile and other industries - Cam Designing for Semi Automatic Auto Lath - Gang Drilling machine - Saddle Stitching machine projects - Web printing machine - Switches for Aeronautics - Switches for General purpose - Irrigation components like Dippers, Sprinkles etc - Chassis for UNO Console General Project: - Worked on Standards department in the field of Standardization of Tap, Drills, Gauges, Material and Tools standards as per IS and ISO. - Jig and Fixtures, Striking unit & Cutting Tools for Watch components - Back bone route diagram for TTL ( Design & Drafting) - Cartoon Animation ( 2D & 3D ) Projects for overseas - Furniture designing - Worked for ISO-9000 certification - Corporate training & Bench marking for Solid edge, Auto CAD, Micro station - Arictectural Walk through - CAD conversions - Cooling Plant layout (3D & 2D)

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

Muzammil here, I am a Mechanical Engineer by Profession and Video Creator by Passion. I love to innovative designs and promote products. I can 3d Model any design, render it to look attract... Read more

Muzammil here, I am a Mechanical Engineer by Profession and Video Creator by Passion. I love to innovative designs and promote products. I can 3d Model any design, render it to look attractive, make animation to make it presentable and create commercial ad to promote it. I have expertise in Creo Parametric, Autocad, Solidworks, Filmora, Ansys and Microsoft Office. It would be my pleasure to work for you as self motivation makes me eligible to any project which relates to my expertise. Thanks for providing your precious time to know me. See you again. Have a great day!

"Driven by a lifelong passion for both artistic drawing and vector technical design, I pursued a career in architecture. My expertise lies in creating high-quality architectural drawings, designs, and... Read more

"Driven by a lifelong passion for both artistic drawing and vector technical design, I pursued a career in architecture. My expertise lies in creating high-quality architectural drawings, designs, and perspectives. Through collaborative projects with colleagues, I have consistently refined my skills in key software for 2D drafting, 3D modeling, and visualization in architecture, construction, and landscaping. I am dedicated to using my digital design abilities to contribute to new projects."

As a mechanical engineer i have a good knowledge of basic principles of engineering which i have learnt during my degree and during designing ,i keep in my mind that i better uses them while designin... Read more

As a mechanical engineer i have a good knowledge of basic principles of engineering which i have learnt during my degree and during designing ,i keep in my mind that i better uses them while designing. skills:- *AutoCAD (2D & 3D). *solidworks (modelling,assembly,rendering,simulation and drawing) *Ms Visio