Hire the best freelance Power Plant Design expert designers for your company

I am a licensed Professional Mechanical Engineer and the founder of Solvify LLC, an independent mechanical engineering consulting firm based in Covington, Washington. I hold a B.S. in Mechanical Engin... Read more

I am a licensed Professional Mechanical Engineer and the founder of Solvify LLC, an independent mechanical engineering consulting firm based in Covington, Washington. I hold a B.S. in Mechanical Engineering from the University of Washington, where I graduated with a 3.89 GPA, and an A.S. in Pre-Engineering from Green River College with a 3.90 GPA. Since founding Solvify in 2025, I have specialized in helping industrial clients in the oil & gas, nuclear, combustion, hydro, and manufacturing sectors tackle complex challenges through design calculations, failure analysis, reliability engineering, and risk-informed design. I bring a strong foundation in thermal-hydraulic and fluid system analysis, combined with practical experience in codes and standards such as ASME B&PV, B31.1, and B31.3. Before starting my own firm, I gained valuable experience across research, operations, product development, and large-scale engineering projects. At TerraPower, I worked as a Fluid Systems Design Engineer on a first-of-a-kind sodium fast reactor, where I developed thermal-hydraulic models, supported nuclear licensing efforts, wrote technical reports, and mentored other engineers. Earlier, as a Gas Products Engineer and Product Technical Lead at Algas-SDI, I led design projects for propane vaporizers, conducted FMEAs, developed capacity calculation tools still used by the sales team, and drove product improvements that enhanced reliability while meeting UL and ATEX requirements. My background also includes hands-on power plant operations at the University of Washington’s steam plant and published research in knot theory. This combination of deep technical analysis, manufacturing and operations experience, and leadership allows me to deliver practical, high-impact solutions that improve safety, reliability, and performance for my clients. I am deeply passionate about helping my clients succeed by delivering engineering solutions that are not only technically sound but also practical, reliable, and aligned with their real-world operational goals. My goal is always to leave clients with stronger systems, greater clarity, and the tools they need to perform effectively long after the project ends.

Industrial designer. My field of activity: architecture and furniture, heat power engineering, power engineering.

Industrial designer. My field of activity: architecture and furniture, heat power engineering, power engineering.

Passionate in cad design and modelling.Highly skilled in solidwork, catia, creo. Made a go-kart(project) in my 1st year of engineering in just Rs25000. Having well knowledge about product design & dev... Read more

Passionate in cad design and modelling.Highly skilled in solidwork, catia, creo. Made a go-kart(project) in my 1st year of engineering in just Rs25000. Having well knowledge about product design & development and cost Optimastion.

Design engineer/supervisor/manager

Design engineer/supervisor/manager

I have Thirteen years of experience piping tendering, engineering and construction positions, during which I’ve become an expert in Aveva PDMS, Autodesk Plant 3D, Bentley OpenPlantV8i, and Caepipe sof... Read more

I have Thirteen years of experience piping tendering, engineering and construction positions, during which I’ve become an expert in Aveva PDMS, Autodesk Plant 3D, Bentley OpenPlantV8i, and Caepipe software and Power Plant Mechanical process and Layout. My professional experience includes Tendering, engineering and construction different types of power plants and Oil & Gas plants, and mastering all of the tools involved in the development of different piping systems from the calculation of piping wall thickness to issuing the isometric and spool drawings. The following are my most relevant skills and qualifications: - Modeling of process piping systems using Aveva E3D, and Autodesk Plant 3D - Piping stress analysis and support selection using CAESAR II, and Caepipe - Preparing flow calculation, pressure drop calculation pipe wall thickness, pump selection and tank sizing using Pipe Flow Expert - Tender estimation and technical preparation - Experienced in using international regulations, codes, and standards used in the piping field (API, ASME, ANSI, ASTM, NFPA, AWWA …etc.)

•Competent in 2D Technical Drafting •Knowledgeable in 3D Modelling •Successfully Designed a usable working mechanism which later been fabricated

•Competent in 2D Technical Drafting •Knowledgeable in 3D Modelling •Successfully Designed a usable working mechanism which later been fabricated

I'm graduated in Tehran university with a course of Bachelor of Science in Mechanical Engineering. I have a 20 years experience in HVAC and plumbing design And I have worked for 25 years in various in... Read more

I'm graduated in Tehran university with a course of Bachelor of Science in Mechanical Engineering. I have a 20 years experience in HVAC and plumbing design And I have worked for 25 years in various industries such as thermal power plants

I am an engineer with a long and excellent track record in projects and construction environment. So basically I'm the guy who routinely build new things and am enjoying it. My real passion lies in he... Read more

I am an engineer with a long and excellent track record in projects and construction environment. So basically I'm the guy who routinely build new things and am enjoying it. My real passion lies in helping individuals build new products from pure raw ideas.

I am Electrical & Solar PV Design Engineer with hand-on experience in utility-scale ground mount and rooftop solar power plant design. SLDs & Electrical Layouts

I am Electrical & Solar PV Design Engineer with hand-on experience in utility-scale ground mount and rooftop solar power plant design. SLDs & Electrical Layouts

iam a dedicated solar power plant designer with extensive experience in creating efficient and sustainable photovoltaic (PV) systems for residential, commercial, and industrial projects. My expertise... Read more

iam a dedicated solar power plant designer with extensive experience in creating efficient and sustainable photovoltaic (PV) systems for residential, commercial, and industrial projects. My expertise lies in using industry-standard tools like PVSyst, AutoCAD, to deliver precise system designs, energy yield simulations, and detailed site layouts.I have successfully completed projects ranging from small off-grid setups to large-scale solar farms, optimizing energy output and equipment selection while ensuring cost-effectiveness. My strengths include technical precision, problem-solving, and a commitment to advancing renewable energy solutions

I am a mechanical energy engineer, I studied at the Lebanese University and then followed a Masters' degree in renewable energy at the Saint Joseph University. I currently work at PDP Energy, an engin... Read more

I am a mechanical energy engineer, I studied at the Lebanese University and then followed a Masters' degree in renewable energy at the Saint Joseph University. I currently work at PDP Energy, an engineering consultancy in the field of power generation, renewable energy and energy auditing and I am following a Master’s in Computational Engineering. I have three years of experience in power plant design from PFD and flow calculation, P&IDs to 3D piping and pipe stress analysis. Also, I design steel structures for solar farms and simulate wind calculations. Furthermore, I am assisting to an energy audit project that joins over 40 large companies in Lebanon to help them reduce there energy consumption and there carbon footprint through an ASHRAE level-2 audit. The topics that I am most concerned in are: Energy, Engineering, Thermodynamics, Heat Transfer, Fluid Dynamics, Theology, Climate Change and many others. My hunger for knowledge drives my plans and actions. My integrity forces me to do things the right way or rather not do them at all. That's why, you can trust me. I'm an engineer.

Multi Disciplined Process and Power Plant Designer From Conceptual Mechanical Detail through to full Plant Walkthrough

Multi Disciplined Process and Power Plant Designer From Conceptual Mechanical Detail through to full Plant Walkthrough

High Motivated Mechanical Cad Design Engineer with a vast amount of design experience Experience in 3D Design from Small parts to large Power plant design. Experience multiple design software's and... Read more

High Motivated Mechanical Cad Design Engineer with a vast amount of design experience Experience in 3D Design from Small parts to large Power plant design. Experience multiple design software's and finished products. Experience in cad software design projects.

Extensively worked on Power system Studies like Load Flow Analysis, Short Circuit Study, Relay Coordination, Transient Stability Study and Motor Staring Study in ETAPfor Industries and Power Plant.... Read more

Extensively worked on Power system Studies like Load Flow Analysis, Short Circuit Study, Relay Coordination, Transient Stability Study and Motor Staring Study in ETAPfor Industries and Power Plant. Design and analysis of electrical system. Equipment Sizing for Transformer, Circuit Breaker, Cable, Bus Bar, Batteries, CT, etc., Protection and Co-ordination Review for electrical equipment. Vendor Document Review for Switchgears. Specification and testing of electrical equipment for desired rating. Conduct feasibility studies and testing on new and modified designs. Provide design information to drafting for documentation. Work knowledge and experience on ETAP, PSCAD, ATP, EMTP, AUTOCAD and DIALUX and PVsyst Software. R&D in Power demand projections and Infrastructure planning along with preparation of report. Trained on GIS,AIS,ATP, Lightning Protection, Testing of equipment and SCADA Control.

I am an experienced researcher with a strong aerospace and mechanical engineering background. My work has involved a range of analytical, computational, and experimental analyses. As a curious and amb... Read more

I am an experienced researcher with a strong aerospace and mechanical engineering background. My work has involved a range of analytical, computational, and experimental analyses. As a curious and ambitious individual, I am always seeking to learn and discover new things. Currently, I am employed as an Aerothermal LAB Engineer, researching the thermal analysis and management of un-conditioned avionics systems. Specifically, I am using the Design of Experiment technique to evaluate the thermal behavior of avionics systems under different altitude and Mach number conditions and verifying the resulting data through both analytical and computational analysis. Previously, I worked as a Research Assistant, performing analytical and computational analysis for the thermal management of avionics systems placed in conditioned bays and qualifying the thermal design of avionics according to MIL-STD-5400E for airworthiness. My area of interest include: • Thermo-fluids and heat transfer • Aerothermodynamics of the high-speed airborne platform • Computational and numerical fluid dynamics • Turbomachinery and power-plant design • Optimization I have proficient skills in: • ANSYS (thermal, fluids, structural, topology optimization, and design exploration) • SOLIDWORKS, Inventor, and Fusion 360 • MATLAB In addition to my research routine, I am studying various subjects including rocket propulsion and vehicle design, intelligent computation in engineering, and air-breathing engines.

Objective: Continuous Improvement of Manpower, Engineering & Material management to achieve highest quality, safety, return in design, construction, installation, commissioning, operation & maintenan... Read more

Objective: Continuous Improvement of Manpower, Engineering & Material management to achieve highest quality, safety, return in design, construction, installation, commissioning, operation & maintenance of the plant/factory/engineering services. Skills: Power Plant Management, Project Management, Contracts & Agreements, Expert in Operation & Maintenance of power plant, Expert in Power plant design, Expert in electrical equipment sizing & electrical design, Expert in Gas Engine Based/ HFO Engine Based/ Duel Fuel Based/Steam Turbine Based/Gas Turbine Based power plant, Experienced in oil processing plant, Gas processing plant, Gas regulating & processing plant, Very good communication ability, Innovative, Hardworking, Cost conscious, Quality conscious, OHES awareness. Details of Professional Experiences: i) a) Employer : WARTSILA Bangladesh Ltd. b) Position :Senior Superintendent Engr.(Electrical)/Electrical Advisor c) Responsibilities : 1) Supervision of the operation of the WARTSILA HFO Engines (6x8.924MW DFEG/WV2032)& auxiliaries. 2) Supervision of breakdown & schedule electrical maintenance of the WARTSILA Engines of the 50MW power plant. 3) Executing OJT on operation & electrical maintenance of the Engines & Auxiliaries of the power plant. 4) Preparation of warranty feedback for the 50MW power plant regarding electrical related problems. 5) Advise on improvement & troubleshooting of the engine & auxiliary equipment problems. d) Duration : From 14.09.11 to till date. ii) a) Employer : Barakatullah Electro Dynamics Ltd. b) Position : Plant Manager c) Responsibilities : 1) Manpower management of the 50MW power plant (19x2.92MW GEG, maker- Jenbacher) . 2) Material management of the 50MW power plant. 3) Management of maintenance & operation of 51MW power plant comprised of GEG ‘s of Jenbacher. 4) Manage to execute & maintain the ISO documents of the power plant. d) Duration : From 03.08.11 to 12.09.11 iii) a) Employer : Ananda Shipyard & Slipways Limited b) Position : Deputy General Manager (Electrical) c) Responsibilities: 1) Managing manpower of the electrical department. 2) Managing materials/equipments of the electrical department. 3) Managing electrification of Ships under construction. 4) Managing breakdown & schedule maintenance of the yard machineries. d) Duration : From 02.05.11 to 31.06.11. iv) a) Employer : Energypprima Limited b) Position : Plant Manager c) Responsibilities : 1) Managing the manpower of the 20MW power plant under construction. 2) Managing the purchasing of the additional material/equipments required for the Gas Engine Generators.(3x3.3MW DEUTZ, 5x2.1MW WARTSILA GEG ,2x2.8MW NIGATA GEG). 3) Managing the supervision of erection of the necessary civil works, Engine auxiliaries, piping, fans, cabling, air-compressors, pumps, air intake filters, silencers, cooling towers, engine gas modules, Piping from gas engines & Metering, Power Transformers 2x15MVA, Switch-gears, of the 20MW Power plant. 4) Managing the modification of old electrical control panels like M.C.C, GCP. 5) Engagement of erection contractors for the auxiliaries. 6) Managing the commissioning of the 3x3.3MW Deutz GEG, Switchgears, 2xStation Transformers,2xPower Transformers, GAS RMS, Gas Modules, Air Compressors. 7) Supervision of breakdown maintenance of plant equipments. 8) Preparation of contracts, agreements, monthly budgets, necessary documents & reports. 9) Managing the allocated supply of sanctioned gas for the power plant. 10)Managing the Industry Inspection pass certificate. d) Duration : From 18.08.09 to 31.03.11. v) a) Employer : GBB Power Limited,24MW Bogra Rental Power Plant. b) Position : Deputy General Manager. c) Responsibilities : 1) Managing the manpower of the 24MW Rental power plant (6x3.86MW DEUTZ Engine TCG2032). 2) Managing the smooth operation & maintenance of the power plant. 3) Improvement of the Plant Systems of 24MW Gas Engine based power plant comprised of 6x3.86MW GEG. 4) Managing the Testing /commissioning of the 35MVA, 11/33KV Transformer,2x 1.6MVA station Transformers. 5) Managing the Testing/Commissioning of the six no. DEUTZ Gas Engine generators, Gas RMS,Air-Compressors,. 6) Preparation of monthly budget, employee assessment, training & development of the operation & maintenance manpower. 7) Trend analysis & decision making in operating the power plant. 8) Trouble shooting of the Engine & electrical equipment problems. 9) Arrangement of timely execution of preventive maintenance of the plant equipments. 10) Managing the documentation of the tests & commissioning reports. 11) Managing the schedule spares, consumable spares, breakdown spares in time. d) Duration : From 12.02.08 to 17.06.09. vi) a) Employer : Al-Toukhi Industry,Trading & Contracting,KSA. b) Position : Electrical Engineer. c) Responsibilities: 1) Supervision of installation & commissioning of the H.V/ L.V Switch-Gears, Generator, Battery Chargers, Lighting system for the 65MW Gas Turbine Power Plant. d) Duration : From 22.06.07 to 10.12.07. vii)a) Employer : RAAD Technologies & Consultants b) Position : Managing Director c) Responsibilities: 1) Electrical design of commercial buildings & shopping center. 2) Design of CNG Filling Station. d) Duration : From May 2005 to June 2007. viii)a) Employer : H.P Chemicals Ltd. b) Position : Electrical Engineer. c) Responsibilities: 1) Verification of the electrical design &Finalizing of the single line drawing of the power plant distribution system. 2) Design of dormitory electrification. 3) Arrange & execute the commissioning of the captive power plant (1x 1.3MW DEUTZ Gas & 1x612 KW DEUTZ Diesel engine ) 4) Purchasing of additional electrical materials/equipments like cables, switchgears, PFI plant, earthing pipes, lights, Circuit Breakers, Panels, lighting poles, ventilation fans. 5) Design, Supervision of installation & commissioning of lighting system. 6) Arrange to perform the maintenance of Motors/Generators, Switchgears. 7) Managing the smooth operation of the power plant. d) Duration : From October 2003 to April 2005. ix)a) Employer : Technics Offshore Engineering Pte Ltd, Singapore. b) Position : E & I Engineer. c) Responsibilities : 1) Electrical Design /Instrument specification data sheet/hook up drawing/heat tracing/loop diagram/cable sizing& quantity verification. 2) Purchasing of Instruments like PG,PT,TT,TI,FT,LT,LG,PS,TS,LS,CV,SDV for the oil processing plant PIG Launcher, Metering Station, Mud gas separator & other small skids of 14no.s. 2) Purchasing of electrical materials like cables, junction boxes, Accessories, heat tracing system. 3) Supervising installation of Instruments, tubing, cable laying, cable termination of all the 14 skids.. 5) Engagement of Subcontractors for electrical & instrumental works for the oil processing plant skids. 6) Verification of the documentation of the project. d) Duration : 04.06.01 to 23.12.02. x) a) Employer : Sembawang Shipyard Pte Ltd.,Singapore b) Position : Electrical Foremen. c) Responsibilities : 1) Supervising the new installation Fire Protection, Gas Detection, V-Sat, Gyro Systems. 2) Maintenance/Overhauling of shipboard electrical equipments Generators, Motors, Switchgears 3) Instrumental installation work for FPSO in the topside modules. 4) Re-establishment of electrical part of shipyard crane. 5) Maintenance of the Biggest Power saw of the yard. 6) Engagement of Sub-contractors. 7) Documentation of the ship electrical systems for the new installation d) Duration : From July 1999 to May 2001. xi) a) Employer : Karnaphuli fertilizer Company Ltd. b) Position : Asstt. Engineer (Maintenance). c) Responsibilities : 1) Performing Operation of 25 MW Power Plant (2x10MW steam Turbine Generator ,1x4MW Duel Fuel Engine Generator, 1x1MW Diesel Engine Generator) as assistant shift in charge. 2) Maintaining the Log sheet of the Generators. 3) Trend analysis of the Generators, Turbines & Engines. 4) Experienced the installation, testing& commissioning of the Captive power plant of 25MW d) Duration : From 28.07.1993 to 03.04.1999. Professional Trainings : Sl no. Name of the Course Name of the Institute Duration 1 Electrical Equipments & Systems Maintenance T.I.C.I(Training Institute of Chemical Industries) 06 Months 2 Automatic Process Control & Sequential Logic Operation. T.I.C.I(Training Institute of Chemical Industries) 02 Weeks 3 H2O2 Electrical System Heilong Jiang Chemical Group Co. Ltd,China 02Weeks 4 H2 Plant Electrical System Sichuan Alley High Tec Co. Ltd, China. 02Weeks Computer Skill : MS-WORD, EXCEL,MS-Project, AUTOCAD. Membership: Fellow of Institute of Engineers Bangladesh. Educational Profile : Name of Exam Year Group Division & Marks Obtained Board / University H.S.C 1986 Science 1st Div(Star),750(out of 1000) Rajshahi Board,Bangladesh B.Sc Engineering 1992 October Electrical & Electronic 1st Class 3rd,CGPA-3.32(out of 4.0) Bangladesh Institute of Technology, Rajshahi,Bangladesh Personal Information: Name: Md.Ashraful Arifin Fathers Name:Late Md.Khatib Uddin Mothers Name: Mrs.Asfia Begum Contact Telephone: Cell:+8801715116985/+8801755563873 ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Present Address:C/O-Banshbari,Ruppur,Sahjadpur,Sirajgonj. Permanent Address: Newjummapara,Rangpur Date of Birth:01-01-1969 Religion: Islam Nationality: Bangladeshi Marital Status: Married Qualification: B.Sc Engr.(EE) Profess. Experiences: 18Years __________________________ Engr. Md.Ashraful Arifin B.Sc in Engg.(E&E) FIEB

I am a professional Mechanical & Piping designer with more than 15 years of experience in the field of Oil & Gas, Power Plant, Chemical Plant etc. I can do from Basic design to Detail design engineer... Read more

I am a professional Mechanical & Piping designer with more than 15 years of experience in the field of Oil & Gas, Power Plant, Chemical Plant etc. I can do from Basic design to Detail design engineering.

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Ma... Read more

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Material Selection & Load Calculation on Structural Beam. • Mechanical Engineer working on Basic (conceptual) and detailed engineering designs for sectors like power plant, process plant and waste water treatment plant. • Mechanical Design Engineer who have worked on different projects & handled a challenging technical development position on Precision Sheet Metal Enclosure Designing using Solid Works and AutoCAD.

I have 15+ years of design and drafting experience in oil & gas, refinery, power plant, industrial plant, well pads, pipeline, tank terminal and FPSO projects around the world. Experience covers a... Read more

I have 15+ years of design and drafting experience in oil & gas, refinery, power plant, industrial plant, well pads, pipeline, tank terminal and FPSO projects around the world. Experience covers area of responsibilities & involvements in design drafting and 3D modeling of piperacks, equipment structures, miscellaneous structures and foundations for pumps, compressors, vertical and horizontal vessels and buildings. I have been involved in creating of pile, foundation, concrete and structural steel detailing drawings, making bill of quantities, checking of pile, concrete and structural steel design & fabrication drawings. I have been involved in various stages of engineering such as basic engineering, front end engineering & detailed engineering. Proficient in the use of AISC, ACI, CISC & CSA structural codes & standards and implementation of department & company manual procedures and work instructions to meet the requirement of ISO-9001. I can independently coordinate with other discipline to resolve issues related to design, drafting and modeling. I am highly productive and efficient designer who works well under pressure independently and can be trusted to finish the job in scheduled time meeting the quality standards.

I am a Mechanical Diploma Holder with good exposure in Mechanical & Piping Engineering. I have total experience of 9 years 6 months various Industrial Piping Drawings and PDMS Modelling of Refine... Read more

I am a Mechanical Diploma Holder with good exposure in Mechanical & Piping Engineering. I have total experience of 9 years 6 months various Industrial Piping Drawings and PDMS Modelling of Refinery Units. My knowledge in general Computer applications & MS Office is good. I have a thorough knowledge of Excel and developed many Calculation Sheets For my dept. which save a lot of time & efforts. My strong points includes dedication & sincerity to work, Good grasping power and maximum out put oriented work style. Both of my Verbal & Communication skills are good and I can easily mingle with a new environment. My multitasking ability is advanced. Please let me know if you would like more information about my projects. I look forward to discussing my suitability for this role in person.

Dear Sir/Madam, This is Asli, I would like to give some details about my self : I am an electrical engineer and I used to work for a British company in London as an electrical design engineer and a... Read more

Dear Sir/Madam, This is Asli, I would like to give some details about my self : I am an electrical engineer and I used to work for a British company in London as an electrical design engineer and after that I moved back to Turkey and I worked for Gama in power plant industry as an electrical project management position for 8 years and I left Gama and looking for new opportunities in Ankara. If you are interested in, I can work from home or if you have any project here in Ankara, or another option I can built your branch office in Ankara. Please let me know. If you wish to have more details about mv CV, please check "Asli Ozcelik" on linkedin. I look forward to hearing from your side. Best Regards,

I’m a experience in power plant designing, and also posses vast knowledge in piping. I’m expert in SP3D, PV Elite and Autocad .

I’m a experience in power plant designing, and also posses vast knowledge in piping. I’m expert in SP3D, PV Elite and Autocad .

Silicon Technologies are a multidisciplinary CAD Outsourcing Production and Project Management Office in Bangalore, Karnataka. We provide GIS, Mapping, Building Services, Mechanical, Electrical, Plu... Read more

Silicon Technologies are a multidisciplinary CAD Outsourcing Production and Project Management Office in Bangalore, Karnataka. We provide GIS, Mapping, Building Services, Mechanical, Electrical, Plumbing, Fire, Hydraulic, Architectural and Civil AutoCAD drafting & Revit modelling support for International Design and Engineering Consultants. Silicon Technologies provide a High Quality, Cost Effective, Flexible and Reliable AutoCAD & Revit Outsourcing service. We can offer both general CAD drawing production, man power supply and CAD project management. ® General CAD Drawing Production ® Quality CAD drafting for basic and detail engineering ® Cost Effective CAD resources ® Fast Turnaround of drawings to meet deadlines ® Flexible & Reliable pool of qualified staff ® Simple & Secure transfer of files between offices ® Manpower supply ® Allocate the dedicated manpower to client for project basis ® Supply of trained technical staff as per the client requirement ® Complete CAD Project Management ® Drawing Setup, Title blocks, layers, blocks (families), external references, view ports, match lines, numbering and drawing titles all managed by Silicon Technologies. ® Quality Assurance procedures are controlled and coordinated by our Q.A Manager. Silicon Technologies documentation ensures the successful flow of information both in-house and between Client offices.

Working in BOP plant design and engineering. Having experience in piping and structural detailing for the companies like M/s. Dalmia Cements, M/s. Andritz, M/s. Alkbous, M/s. Shree Cements, etc

Working in BOP plant design and engineering. Having experience in piping and structural detailing for the companies like M/s. Dalmia Cements, M/s. Andritz, M/s. Alkbous, M/s. Shree Cements, etc

I am Mechanical Design Engineer. I have work experience of 5 years as designer. I am good in mechanical design, Product design, HVAC Systems design & Duct design various types of company like Pharmace... Read more

I am Mechanical Design Engineer. I have work experience of 5 years as designer. I am good in mechanical design, Product design, HVAC Systems design & Duct design various types of company like Pharmaceutical, Textile, Foods, Power plant, Foils Factory etc. I have good knowledge in AutoCAD, Solidworks, Microsoft Advance Excel, Microsoft Power point & Microsoft Word. Best Quality Works With Lowest Price guaranteed. No any rework charges. 100% Work satisfaction Thanks you...