Hire the best freelance Piping Plan expert designers for your company

Over 20 years of AutoCAD experience. Proficient with AutoCAD and Plant3D. Available to do the following: - P&ID's - Piping Isometrics - As-built Piping Models - Plans & Sections - Line list... Read more

Over 20 years of AutoCAD experience. Proficient with AutoCAD and Plant3D. Available to do the following: - P&ID's - Piping Isometrics - As-built Piping Models - Plans & Sections - Line lists - Tie-in Lists Contact me for any of your CAD needs.

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

13 years of experience in Multidisciplinary Projects for the Petrochemical, Oil & Gas Industry, mainly in Piping Design Engineering for Process Plants, handlign piping desing tools in 3D PDS, Cadworx... Read more

13 years of experience in Multidisciplinary Projects for the Petrochemical, Oil & Gas Industry, mainly in Piping Design Engineering for Process Plants, handlign piping desing tools in 3D PDS, Cadworx, and 2D software Autocad, Microstation. Excellent handling of the Cadworx plant version 2006 to 2015 for equipment modeling, piping design, and structural. Also handling Isogen software to produce isometric. Other sotfware using is PDS software - Modules: Equipment Modeling, Piping Designer, Isometric Drawing Manager, Drawing Manager (Piping Plans), SmartPlant Review, 3DS Orthogen, Q MicroStation, AutoCAD, MS Office

I am a Mechanical Engineer with 5 years’ experience in Engineering company for mechanical solution in petrochemical, oil and gas, pharmaceutical, and transport equipment. Expertise software for model... Read more

I am a Mechanical Engineer with 5 years’ experience in Engineering company for mechanical solution in petrochemical, oil and gas, pharmaceutical, and transport equipment. Expertise software for modelling and simulation: - PV Elite - CAESAR ii - SolidWorks - Autodesk Inventor - Autodesk AutoCAD - AutoCAD Plant 3D - ANSYS Fluent Familiar with international standards and codes such as - ASME B31.3 - Process Piping, - ASME B31.1 - Power Piping, - ASME VIII div 2 – Boiler and Pressure Vessel, - API 610 – Centrifugal Pump, - API 660 – Shell and Tube Heat Exchanger, - TEMA 10 Some of the design projects I have completed upon have been enlisted as follows: - Design of Piping Plant for Biodiesel Plant complete with isometric drawing, and MTO. - Design of Pressure vessel such as: storage tank, filter strainer, heat exchanger. complete with calculation and designation. - Design of Transport tank such as: Aviation refueller, fuel tanker, hydrant dispenser - Simulation of CFD for wire and tube heat exchanger - Stress Analysis of Evaporation line 🔵 Expertise software for modelling and simulation: - PV Elite - CAESAR ii - SolidWorks - Autodesk Inventor - Autodesk AutoCAD - AutoCAD Plant 3D - ANSYS Fluent 🔵 I offer a variety of services: A. Pressure Vessel Design - Storage Tank - Heat Exchanger - Mixer tank / Reactor Vessel - Agitator Design - Spherical Vessel - Distillation Column - Separator B. Piping Design - Process piping - Water system - Hydraulic system C. Transport Equipment - Aviation Refueller - Fuel Tanker - Hydrant Dispenser - LPG transport - Powder Transportation - Lowbed Trailer - Wing box Trailer D. Simulation - CFD simulation for pipe - CFD simulation for airfoil - CFD simulation for external flow

I HAVE TOTAL 5 YEARS EXPERIENCE IN AUTOCAD & SOLIDWORKS DRAFTING. I HAVE GOOD KNOWLEDGE OF AUTOCAD DETAILING , PRESENTATION, ACCURACY & SPEED. I HAVE ALSO KNOWLEDGE OF ISOMETRIC DRAWING IN AUTOCAD. I... Read more

I HAVE TOTAL 5 YEARS EXPERIENCE IN AUTOCAD & SOLIDWORKS DRAFTING. I HAVE GOOD KNOWLEDGE OF AUTOCAD DETAILING , PRESENTATION, ACCURACY & SPEED. I HAVE ALSO KNOWLEDGE OF ISOMETRIC DRAWING IN AUTOCAD. I HAVE GOOD KNOWLEDGE IN SOLIDWORKS PARTS MODELING & PARTS ASSEMBLY PROJECT. I HAVE DONE LOTS OF PROJECT IN AUTOCAD & SOLIDWORKS DRAFTING. I CA N CREATE MECHANICAL PARTS DRAWING,BUILDING FLOOR PLAN, PIPING PLANT & OIL PLANTS.

Steel Structural Consultant (SSC) is a quality-driven outsourcing company that offers well-defined, intuitive and accurate Architectural Engineering services to the global clientele since our inceptio... Read more

Steel Structural Consultant (SSC) is a quality-driven outsourcing company that offers well-defined, intuitive and accurate Architectural Engineering services to the global clientele since our inception. Being a leading consultancy, highly qualified, skilled and technically sound professionals are our true assets! We follow international standards and codes for meeting your specific requirements. We provide finest and thorough consultation for Architectural Design Services, CAD Drafting, Structural Detailing Services, MEP Shop Drawings Services, Interior Designing Services and others with best competitive pricing in the industry. Our fleet of designers, engineers, architects, detailers, draftsmen and professionals are truly aware about all the latest tools and technologies related 2D & 3D modeling and detailing. With the proper implementation of present day technology, we give you exceptional drawings for long-lasting construction. Structural Design Structural Analysis Architectural Design Services Structural Modelling Steel Detailing Architectural Drafting Services Structural Drafting Misce. Steel Detailing Services Conceptual Modeling Services Rebar Shop Drawings Concrete Masonry Detailing Interior Designing Services Bar Bending Schedules Rebar Foundations Detailing Hvac & Mep Shop Drawings Mechanical Design Services Mechanical Drafting Services Mechanical 2D Drafting Services Piping Engineering Piping Design and Drafting Services Plant Designing FEA Analysis Structural Load Calculation Plant 3D Modeling Piping Shop Drawings Structural Detailing Tower Design CAD Conversion Paper To Cad Structural Designing & Drafting We offer our top-notch structural drafting and detailing services to structural engineers, architects, fabricators, builders, erectors as well as general contractors. For more details just visit us at www.steelstructuralconsultant.com www.mechanicalpipingdesign.com

+17 Years of enriched experience of Design and Construction in Oil & Gas, Petrochemical, Food and Power Industries. Design and Drafting of Piping System (Plot Plan, PFD, P&ID, Piping Plan, Piping Iso... Read more

+17 Years of enriched experience of Design and Construction in Oil & Gas, Petrochemical, Food and Power Industries. Design and Drafting of Piping System (Plot Plan, PFD, P&ID, Piping Plan, Piping Isometrics, Spool Fabrication Drawings and 3D Modeling) using AutoCAD, Micro station CADWorx and, Autodesk AutoCAD Plant 3D, Autodesk Revit Preparation of Piping Bulk & Valves MTO and detailed Construction BOQs of Complete Gas/Oil Processing Plants at Proposal stage. Drafting work also includes various Mechanical Equipment (Vessels, Columns, Heat Exchangers and Tanks including Steel Structure) Detailed Drawings.

We at Go technologies have a vast experience in providing full range of CAD services from planning and design to implementation at an unparalleled standard of flexibility. Our technological expertise... Read more

We at Go technologies have a vast experience in providing full range of CAD services from planning and design to implementation at an unparalleled standard of flexibility. Our technological expertise can meet your requirements ranging from 2D/3D drafting, 3D modelling & rendering, machine design, reverse and forward engineering and 3D plant piping & routing maps. Our core focus is to provide quality services to Industrial segment for their needs by incorporating latest CAD CAM Services. We also service the construction segment however our core focus remains with Industries and plants. We believe in generating new ideas and suggesting methods to give cost effective solution to our clients, thus helping them in application of lean processes & optimal engineering solution using CAD services. One of our expertise is in plant layout and process piping routing as per actual which helps in plan engineering operations like modification of plants, visualisation and documentation of complex piping, planning movement & placement of machinery, open spaces and passages , designing of new plants and wing extensions, etc . We have successfully drawn out 3D plant layouts & piping and workflow 3D maps for clients like Colgate in multiple locations across India. With our expertise and wide experience in industrial design segment we also offer machine design services right from product prototyping to manufacturing support. Our methodology involves brainstorming on easy, lean and cost effective solution for client for their machine design needs . We have worked with ours various clients national as well as international like IFB, Kineco, WhereQube etc. with successful implementation across various sectors. We specialize in , - 2D & 3D layouts. - Industrial Plant Layouts, Structural & Piping & Routing Maps. - Machine Designs - Renderings - Product Prototyping - Ship Design - Furniture and Plastic Designs - Architectural and interior 3D and 2D Modelling and designs.

I am a Civil Engineer specializing in Land development and survey projects with+15 years of experience. I can work closely with your design and drafting needs as well in providing much needed and on-g... Read more

I am a Civil Engineer specializing in Land development and survey projects with+15 years of experience. I can work closely with your design and drafting needs as well in providing much needed and on-going design and drafting specifically in the areas of • AutoCAD, Land Development Desktop, Civil 3D • Site planning, Mass grading, sewer design and utilities • Grading, Demolition and construction plans • Sewerage & drainage plans/ CAD drawings • Road cross-section & Piping plans/ CAD drawings • Digitizing images (map contours and landscape) Survey Drafting • Structural CAD drawings • Structural detailing • Timber Design • Architectural layout & landscaping CAD drawings • Architectural floor plan CAD drawings • Space plan CAD drawings • Revit Modeling • Rendering in 3DS Max and SketchUp • Interior designing & planning / CAD drawings • Quantity takeoffs • Land development & Survey Projects My expertise is: - Water, sanitary sewer, and storm drainage projects for residential, commercial, and industrial areas and Land development and survey project experience. Based on my +15 years experience, I am capable of participating in different types of civil projects such as: road & drainage designs, subdivision projects, treatment plants projects, plumbing designs No matter how big a project is, I can assist independently with minimal instruction and supervision from your side. Thanks to the time difference, your project can be done while you asleep, Reasons to hire me: - - Quality and timely service - I am a very responsible professional and never disappear in the half-done job. - I am very fast, I can finish the 2 days job in few hours. - I am assuring you quality work as I worked on many international projects. - Good work with commitment and professionalism. - 100 % satisfaction guaranteed - Continued support after the delivery of final product -Refund money if you are not satisfied with work.

With over 11+ years of expertise in Mechanical Design Engineering, I specialize in delivering high-performance, code-compliant engineering solutions for pressure equipment, storage tanks, and structur... Read more

With over 11+ years of expertise in Mechanical Design Engineering, I specialize in delivering high-performance, code-compliant engineering solutions for pressure equipment, storage tanks, and structural systems. My deep understanding of ASME standards, finite element analysis (FEA), metallurgy, and fabrication procedures ensures that your projects are not only safe and efficient but also fully compliant with international regulations. Whether you need precision design, fabrication-ready documentation, or end-to-end project support, my services are tailored to minimize risks, optimize costs, and accelerate project timelines—giving you a competitive edge in quality and reliability. Why Choose My Engineering Services? ✅ Pressure Vessel & Heat Exchanger Design – Expert mechanical calculations to determine optimal thickness, flange ratings, and material specs, ensuring durability and regulatory compliance. ✅ Storage Tank Design & Optimization – From shell thickness to wind girders and venting systems, my designs enhance structural integrity while reducing material waste. ✅ Fabrication-Ready Drafting & Detailing – High-quality ASME-compliant drawings, including Welding Maps, BOMs, and Dimensional Tolerances, to eliminate fabrication errors. ✅ Piping & Structural Systems – Detailed P&ID-based piping plans, isometrics, and structural skid designs that align with stress analysis for long-term reliability. ✅ Technical Writing & Documentation – Clear, actionable Assembly Plans, Lifting Plans, User Manuals, and Installation Guides that prevent costly mistakes and ensure safe execution. ✅ Project & Proposal Support – From technical bid preparation to on-site troubleshooting, I bridge the gap between engineering and execution, saving time and reducing delays. ✅ Quality Assurance & Compliance – Rigorous adherence to ASME Y14.5, welding standards, and material specifications to avoid rework and ensure certification. Your Key Benefits: 🔹 Reduced Project Risks – My designs and documentation anticipate fabrication challenges, preventing costly rework and delays. 🔹 Regulatory Confidence – Full compliance with ASME, API, and international codes, ensuring smooth inspections and certifications. 🔹 Cost & Time Efficiency – Optimized material selection and constructability-focused drafting to cut unnecessary expenses. 🔹 Seamless Coordination – I act as your technical liaison, ensuring clear communication between drafting, fabrication, and inspection teams. 🔹 End-to-End Support – From concept to commissioning, my expertise covers design, documentation, and execution oversight for flawless project delivery. If you need precision engineering that prioritizes safety, compliance, and operational excellence, let’s collaborate to bring your projects to life—on time, on budget, and beyond expectations.

Highly qualified Architect with 17 years of extensive experience in Oil & Gas construction and project drafting. I offer a comprehensive skill set that covers the full lifecycle of architectural housi... Read more

Highly qualified Architect with 17 years of extensive experience in Oil & Gas construction and project drafting. I offer a comprehensive skill set that covers the full lifecycle of architectural housing projects—from initial concept to final execution. Additionally, I specialize in the Oil & Gas sector, providing high-precision 2D and 3D deliverables, including piping plans, isometrics, P&IDs, steel structures, and civil works

Engineering design experience consist of process drawing, plant layout, 3d modeling, Automation, and fabrication. I worked for Power plant, Tank farm, Process plant, Fertilizer Plant, Oil well platfor... Read more

Engineering design experience consist of process drawing, plant layout, 3d modeling, Automation, and fabrication. I worked for Power plant, Tank farm, Process plant, Fertilizer Plant, Oil well platform, and combustion equipment project. I worked on piping plan layouts, isometrics, equipment layouts, and 3d ... ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns.... Read more

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns. Towers, Steel Structure, Mechanical & Civil Drafting. Preparing propose initial conceptual design layouts for various projects. Ability to create detailed construction drawings independently which is included related specifications, and capable of enforcing such specifications. Involve in construction, supervision, inspection and material take-off. Involve with Auto CAD 2D & 3D,Bently open plant 3D-Modeler, Piping plan, piping Isometric Drawings, Sheet Metal Work, Mechanical Drawings, PFD, P&ID, and Civil Layout etc. A keen and dedicated Piping Designer having approx. 10+ years of experience in Oil & Gas, Petrochemical, and Mechanical equipment industries. My Responsibilities Includes: • Preparation and modification of Piping layouts. • Preparation of piping isometrics. • Extraction of isometrics form plan. • Piping of storage tank, vessel, heat exchanger, Pumps and Compressors  equipment layout and general arrangement drawings  Under Ground Piping Drawings  • Preparation and modification of support layout. • Preparation of M.T.O. (Weight Calculation) and B.O.Q. • Sketching to provide information and site conditions.  Preparing Steel Structure drawings for installation, proposed new Platform, Joints detail (Welded & Bolted) Bracing, ladders. • Fabrication detail drawings • Rigging plan views from PDS 3D model. • Site Supervision during Project execution and Turn Around. • Generation of bill of material for Projects. • Preparation and modification of Equipment drawings.  • Support marking as per stress analysis report.  Design the BOX UP for different kind of leakages  • PFD, P&IDs, MSDs.

I am a Mechanical Draftsman. I have experience of 15 years as Piping and Mechanical structural Draftsman in a fertilizer industry. I have huge experience of Autocad and Cad works. I have experience of... Read more

I am a Mechanical Draftsman. I have experience of 15 years as Piping and Mechanical structural Draftsman in a fertilizer industry. I have huge experience of Autocad and Cad works. I have experience of drafting of piping plans, piping Isometric, piping supports, civil foundations for supports and equipment's drawings.

Piping / Pipe Supports / Piping Stress Analysis Total 20+ years’ experience where 15+ years as piping stress analysis engineer including pipe support engineering and 5 years experience as piping eng... Read more

Piping / Pipe Supports / Piping Stress Analysis Total 20+ years’ experience where 15+ years as piping stress analysis engineer including pipe support engineering and 5 years experience as piping engineer in offshore and onshore of oil & gas / petrochemical industries as well as power plants. - Knowledge of NOKSOK and DNV standards - Expert in Stress analysis software - Caesar-II 2014 / 2016, Autopipe, Triflex - Expert in Pipe support engineering, 3D modelling, Design, Checking - Expert in Piping layout and materials - Finite Element software: Ansys 14.0 - 3D modelling: PDMS, Inventor, Solid works, - 2D Drafting: Autocad 2014 - Pressure vessel design using PV Elite - Analyze / approve piping stress calculation for any critical lines - Prepare stress calculation reports for third party verification and it’s checking. - Prepare isometrics / GA / stress iso using Microstation and Autocad. - Experience in use of ASME Codes B31.1, B31.3, B31.4, B31.8, VIII –Div.1 & 2, API standards,NORSOK, HS&E, DNV, PED, PD5500, EN 13480, EN 13445 etc.

A highly experienced Senior CAD Designer with over a decade in engineering design, implementation, and the creation of manufacturing drawings for spare parts. Possesses a deep understanding of CAD mod... Read more

A highly experienced Senior CAD Designer with over a decade in engineering design, implementation, and the creation of manufacturing drawings for spare parts. Possesses a deep understanding of CAD modeling principles and a proven record of accomplishment in piping engineering projects for the Oil & Gas industry. Adept at handling diverse project requirements, with specific expertise in 3D modeling of various skids (chemical injection, manifolds, fuel gas, wellhead, test separator) and their piping according to specifications and P&IDs in SolidWorks and AutoCAD. Proficient in generating comprehensive technical drawings, including Piping Plans, structural and detail drawings, support drawings, Piping Spool and Isometric drawings derived from 3D models, as well as detailed drawings for the manufacturing of spare components. Also skilled in reviewing 3D model assemblies and piping isometric plant 3D layouts

Sherif Mohamed Abd El-Nour Abd El-Magid                          &nbsp... Read more

Sherif Mohamed Abd El-Nour Abd El-Magid                             Piping Designer Sr. Cad Designer  _________________________________________________________________________________  OBJECTIVE: Seeking a Challenging Career in a Petroleum (Oil & Gas) or Construction Company Whereby My Designing and Drafting Background, Previous Work Experience, and Managerial Skills can be Applied.   PERSONAL INFORMATION: Date of Birth:     17-1-1970 Address:             20 Mohamed El-Sayed Hyba from Abu El-Fadel St.,      El-Zawia El-Hamra, Cairo. Egypt. Military Status: Finished Marital Status:  Married Nationality:        Egyptian Religion:             Moslem   EDUCATION: Diploma of Industrial Technicality, Mataria Institute of Industrial Technique Department:             Mechanical Graduation Date:     May 1992 Overall Grade:         Good   LANGUAGE SKILLS: Arabic:  Mother tongue English: Very good command of both written and spoken         PROFESSIONAL SKILLS:   Familiarity with International codes & standards.   18 YEARS EXPERIENCE IN THE FIELD OF MECH. WORKS DESIGN             AND DRAFTING INCLUDES: EQUIPMENT ORIENTATION (following Data Sheets). PIPING ROUTING (following P& ID's) FOR EQUIPMENT SUCH AS PRESSURE VESSELS, TANKS, TOWERS, EXCHANGERS AND PUMPS. SITE LAYOUTS AND PLOT PLANS DRAWINGS. PLANS, SECTIONS & DETAILS DRAWINGS. SHOP DRAWINGS. ISOMETRICS AND BILL OF MATERIALS. MECHANICAL DRAWINGS FOR MACHINE ROOMS. UNDERGROUND DRAINAGE NETWORKS. TREATMENT STATIONS. ANIMATION FOR MORE DETAILS AND REPRESENTATION. ______________________________________________________________________________________   COMPUTER SKILLS:   ·         Very good Knowledge of Computer Hardware. ·         Very good Knowledge of Various Operating Systems (DOS / Windows ) ·         Very good Knowledge of Many Applications Running Under Microsoft Windows (Including Microsoft Office Applications). ·         Very good  Knowledge of PDS system. ·         Very good  Knowledge of PDMS system. ·         Very good  Knowledge of Smartplant Review. ·         Very good  Knowledge of ORTHOGEN. ·         Very good Knowledge of MICROSTATION Program (2D - 3D). ·         Excellent Knowledge of AutoCAD Program (2D - 3D). ·         Very good Knowledge of CADWorx Application. ·         Good Knowledge of AutoPLANT Application. ·         Good Knowledge of PlantSpace Application.   ______________________________________________________________________________________                     WORK EXPERIENCE:   I WORK FORCB&I Lummus L.L.C. Position: Sr. PIPING DESIGNER & LEAD CAD DESIGNER Dec. 2010 – Present Member of Reficar project design group (PDS, ORTHOGEN, MicroStation & AutoCAD). Tasks Accomplished Included: ·         Preparing 3D-Equipment Models (following Data Sheets). ·         Preparing 3D-Piping Models (following P&ID). ·         Preparing Supports in Models for Stress Analyses review. ·         Extract and Check ISO's. ·         Coordinate with Process Dep. To reroute lines according to P&ID updates. ·         Coordinate with Stress Analyses to achieve optimum supporting and routing as possible.   TEAM LEADER Tasks Accomplished Included: ·         Extract 2D by DRAWING MANAGER MODULE. ·         PRODUCE DWG & DGN FORMATS WITH ORTHOGEN. ·         FINISH AND COMPLETE 2D WITH FULL DATA AND DETAILS             by AutoCAD & MicroSTATION.     I WORKED FORCB&I Houston Position: Sr. PIPING DESIGNER July 2010 – Dec. 2010 Member of Reficar project design group (PDS, Microstation & AutoCAD). Tasks Accomplished Included: ·         Preparing 3D-Models by PDS (included P&ID and Data Sheets). ·         Clash Check Reports. ·         Extract ISO's ·         Extract 2D with DWG & DGN formats by ORTHOGEN. ·         FINISH DRAWINGS WITH FULL DATA AND DETAILS.                 I WORKED FORCB&I Lummus L.L.C. Position: Sr. PIPING DESIGNER Aug. 2007 –July 2010 Participated in NAGARJUNA project (PDMS & AutoCAD). Tasks Accomplished Included: Member of NAGARJUNA Project team, Participated in Preparing                                     the Modeling as following: - Check Conditions for lines to update from latest Line List. - Check Clashes for lines to release it from Model. - Coordinate with Stress Analyses to achieve optimum    supporting and routing as possible. - Coordinate with Process Dep. To reroute lines according to      P&ID updates. - Coordinate with Instrumentation Dep. To update Sets and    Hook-Up’s. - Coordinate with Electrical Dep. To arrange locations of    Lighting Devices. - Extract ISO’s for Checking. ______________________________________________________________________________________   I WORKED FORHEAVY ENGINEERING INDUSTRIES AND SHIPBUILDING CO. (K.S.C) Position: PIPING DESIGNER Apr. 2006 – Jun 2007 PARTICIPATE IN SEVERALJOBS FOR K.O.C Tasks Accomplished Included: ·          Preparing Equipment Orientation. ·          Preparing Equipment Piping. ·          Preparing Piping Routing. ·          Preparing Pipelines Networks. ·          Preparing Mechanical Drawings & Details. ·          Plot Plans. ·          Site Layouts. ·          Piping Plans & Sec's. ·          Piping Isometrics & MTO. ·          3D View Perspective. ·          Modeling & ISOgen. ____________________________________________________________________________________       I WORKED FORSIEMENS Industrial Solutions and Services. Position: PIPING DESIGNER Sep. 2004 – Mar. 2006 Participated in EAST DELTA piping treatment project And other Electromechanical Projects Tasks Accomplished Included: ·           Preparing Mech. & Piping Works. ·           Preparing SECTIONS & DETAILS. ·           Preparing ROUTING OF PIPING NETWORKS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ______________________________________________________________________________________   I WORKED FORSAUD CONSULT EL KHOBAR. Position: CAD SUPPORT Mar. 2003 – Feb. 2004 Participated in KHAFJI project forARAMCO Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ·           Repairing and Converting for DGN & DWG files. ·           Trainer ( MicroStation ). ______________________________________________________________________________________   I WORKED FORENPPI Position: PIPING DESIGNER May 2001 – Mar. 2003 Participated in Several Petroleum & Industrial Projects Tasks Accomplished Included: ·           Preparing Equipment Orientation & Piping (Vessels, Towers, Tanks, etc.). ·           Preparing Piping Routing for Networks. ·           Preparing Modeling. ·           Preparing Mechanical Drawings for Pump Stations. ·           Preparing Shop Drawings & Details. ·           Plot Plans. ·           Site Layouts. ·           Piping Plans. ·           Piping Isometrics & MTO. _____________________________________________________________________________________           I WORKED FORABBpetroleum Position: PIPING DESIGNER & Sr. MECH. DRAUGHTSMAN Apr. 2000 – Apr. 2001 Participated in ACPA project Jobs Accomplished Included under & above ground: ·           Preparing Underground Oily Piping Design System. ·           Preparing Details. ·           Preparing Piping General Arrangement of Tanks Farm. ·           Preparing Piping Isometrics & MTO.   ______________________________________________________________________________________     I WORKED FOR ZUHAIR FAYEZ Misr Position: MECH. DRAUGHTSMAN Jan. 98 - Apr. 2000 Participated in many of Electromechanical Projects Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing IRRIGATION SITE LAYOUTS.   ______________________________________________________________________________________     I WORKED FORSAUD CONSULT Misr Position:MECH. DRAUGHTSMAN Jan. 96 - Dec. 97 Participated in many of Electromechanical Projects Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ·           Preparing 3D-DRAWINGS.   ______________________________________________________________________________________                 I WORKED FOR GARNO Misr Position: PIPING, MECH. DRAUGHTSMAN Jan. 95 - Dec. 95 Participated in KHARGA treatment stations Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ·           Preparing 3D-DRAWINGS. ______________________________________________________________________   Time Before I Worked For Different Companies As a Beginner Under Training.   ______________________________________________________________________      

Created isometric drawing. Created pipe support updated p&id as per mark up updated piping plans as per mark up. Visitied site construction.

Created isometric drawing. Created pipe support updated p&id as per mark up updated piping plans as per mark up. Visitied site construction.

We are India based renowned organization mainly caters to CAD based designing, 2D drafting, 3D modeling, and drawing. We primarily serve to Architecture, Engineering, and Construction Industry. We bui... Read more

We are India based renowned organization mainly caters to CAD based designing, 2D drafting, 3D modeling, and drawing. We primarily serve to Architecture, Engineering, and Construction Industry. We build and rebuild everything you desire that conforms to standardized building norms. Our sole aim is to ensure each and every engaged client gain the satisfaction they are looking at our designed solutions. Our team includes the highly skilled members who represents the various range of expertise. We undertake every kind of projects irrespective of complexity or size. Each of the professionals is up skilled to adopt the current state-of-the-art technology in a secure setting. We are the leading Engineering and CAD Outsourcing Consultants having its office originated in India. We are a well-established company that provides full-fledged CAD Services and CAD Engineering Services to leading players across the globe to all major AEC and Mechanical engineering fraternity. Our expertise in the services is we are a leading CAD design companies from India, that offers CAD 2D Drafting and drawings as well as 3D modeling to the team of architects, contractors, sub-contractors, engineers, and the stakeholders who are part of the building project. Our services are not limited, but we provide a full-fledged range of services that is the base for any engineering project. Our expertise in providing services are in the areas of Architectural CAD Drafting, 2D CAD drafting, 2D Architecture Drawing, Architectural 3D Model, BIM Services, CAD Drafting Service, Electrical CAD, Electrical Circuit Diagram, Electrical Schematic Diagram, Electrical Design, Structure CAD Services, 3D Model, Structure Design, Structure Detailing, Steel Structure Drafting, Steel Structure Design, 3D Animation, Mechanical CAD Drafting, Mechanical 3D Model, Mechanical CAD Design, MEP Drawings, 3D Rendering Services, CAD Conversion, Paper to CAD Conversion, Raster to Vector, etc. A glance at our architectural drafting and detailing services: • Architectural Elevations and Sections • Architectural Layout and Landscaping • Architectural Floor & Roof Plans • Interior Designing and Planning • Sanitation and Piping Plans • Space Plans and Bifurcation • Detailed Architectural Working • Structural & MEP Drawings • Sewerage and Drainage Plans • Furniture Drafting & Modeling • Reflected Ceiling Plans • Drafting from red-lined PDF • HVAC Layouts and GA drawings • Working Drawings of Door / Windows Schedules • Bill of Quantities (BOQs) • Assembly Drawings • Building Elements & Details • Component Drawings • Architectural Sheet Metal Shop Drawings • Architectural Millwork drawings • Construction Document Set (CD set) • As built Drawings & Red-line Markup drawings • PDF to CAD Conversion • Raster to Vector Conversion CAD Conversion • JPEG to CAD conversion of building designs • PDF to CAD conversion • Scanned documents to CAD conversion • Paper to CAD conversion • Hand sketches to CAD conversion • TIFF to CAD conversion • BMP to CAD conversion • CAD redrafting and conversion • Photographs to CAD conversion • Velum or blueprint to CAD conversion • Raster image to CAD conversion Our CAD Animation Services allow the builders, interior designers, architects, realtors, and developers to understand the right view of a building with lifelike colors, textures to give a lively spirit to Architectural Design Concepts. We offer services as under: • 3D Walkthrough • 3D Architectural Rendering • 3D Rendering • 3D Modeling • 3D Architecture Service • 3D Floor Plan • CAD 3D Animation • 3D Animation • 3D Fly Through • Walkthrough Services CIVIL ENGINEERING SERVICES WE OFFER Below is the list/ types of Civil Engineering Services that are been offered by us. This is the list having the complete guide so that our clients have not to search for any other options and their projects are completed by the company who will give them the services from start to end. • Civil Engineering Services • CAD Civil Engineering Services • AutoCAD Civil 3D • AutoCAD Civil 2D Drawing • Civil and Urban Planning, • BIM Consulting Services • AutoCAD Civil Design • CAD Services • CAD Drafting Service • CAD Design Services • AutoCAD design civil • AutoCAD Civil 2D • AutoCAD Design of Civil Engineering

Lead Piping Engineer with over 21 years of experience in piping design, fabrication, construction, and class plan approval for shipbuilding, offshore/onshore oil & gas, and power plant projects. Speci... Read more

Lead Piping Engineer with over 21 years of experience in piping design, fabrication, construction, and class plan approval for shipbuilding, offshore/onshore oil & gas, and power plant projects. Specializing in outfitting, pipe support design, piping stress analysis and compliance with class society rules (ABS, RINA, DNV, BV) and international codes (ASME, DIN). Skilled in 3D design environments and coordinating with multi-disciplinary teams throughout the project lifecycle.

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conduct... Read more

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conducting finite element analysis (FEA) using AUTODESK FUSION 360, drawing and preparing LAYOUT drawings. I'm currently working as a piping design engineer for a consultancy firm, responsible for producing P&ID's, ISO's, GA's and plot plan drawings. I contributed in projects for a reputable companies like ExxonMobil, ESSO, Chevron,.. I carried out my tasks using software programs like: AUTOCAD PLANT 3D, AUTODESK FUSION 360, AUTOCAD, DRAFTSIGHT, AVEVA PDMS,

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools lik... Read more

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools like E3d, Sp3d, Pdms and Pds. Roles and Responsibilities:- Piping layout designing 3d Modeling of Equipment, Piping, etc., Preparation of Plotplan,Keyplan,Equipmentlayout,Piping GA’s Vendor drawings checking Interacts with other disciplines Inter-Discipline Documents Checking & Clearing Isometric checking Nozzle orientation Support callout based on stress output Attending Model review & comments providing to other disciplines MTO Activities Input preparations for civil works Tie-in/As built works in both Brownfield and Greenfield IFC iso issuing Preparation of Combined UG Plan drawings UG piping/Isometrics Preparation of piping GA drawings Manages and maintains the Project Documentation Model close out activities

Hello! I am Tapas Palit, a hardworking, self-motivated, flexible and an independent resource. I enjoy work and keep positive attitude even in the times of adversities. When hired by an enterprise, I t... Read more

Hello! I am Tapas Palit, a hardworking, self-motivated, flexible and an independent resource. I enjoy work and keep positive attitude even in the times of adversities. When hired by an enterprise, I take responsibility to complete a job within the given deadline. Professionally I am a mechanical/piping/structural designer/draftsman with around 25 years of experience in mechanical component drawing, structural & piping layout drawing & design. I keep industry-ready skills in the latest tools of Autocad/3D softwares. My professional services comprise Plans for proposed, details, as-built, elevations, sections and permit drawings of mechanical—Piping layout, Piping isometric, Plot plan,P&IDs, PFD, etc. I have completed multiple projects using paper to CAD conversions and convert any pdf/sketch/jpg to dwg file. I can also plan and prepare Operations and Maintenance standard manuals. I also have expertise in operations and maintenance manuals ~expert in Microsoft Office Word, Excel, Powerpoint, Data Entry etc. Will be happy to be a part of your existing or next project. Thank you