Hire the best freelance MEP expert designers for your company

Lumière Studios is a Chicago-based technical production firm focused on the execution of complex BIM and visualization mandates. We operate as a strategic, white-label partner for architects, develope... Read more

Lumière Studios is a Chicago-based technical production firm focused on the execution of complex BIM and visualization mandates. We operate as a strategic, white-label partner for architects, developers, and general contractors, providing the specialized bandwidth required to transition projects from conceptual design to coordinated construction documentation with high velocity. Service Pillars: I. BIM Coordination & Technical Modeling: Our primary mandate involves the authoring of accurate BIM models (LOD 200–400) to support architects and builders in securing approvals and mitigating the risk of costly site errors. We specialize in model creation, clash detection, and scan-to-BIM coordination to identify spatial conflicts before materialization. II. Executive 4K Visualization: Complementing our technical rigor, we leverage a high-end tech stack to transform existing plans into photorealistic 4K assets. These deliverables are engineered to secure stakeholder alignment, drive pre-sales, and facilitate capital ROI. III. Technical 2D Drafting: We produce clear, non-stamped architectural and MEP plan sets, including fabrication and shop drawings for seamless project communication. Commercial Impact: Our technical assets act as a catalyst for project growth. In a benchmark case study, the deployment of our team's high-fidelity visualization assets and video walkthroughs facilitated a 300% increase in a client’s project budget—transforming an initial $400,000 allocation into a $1.6 million project. Operational Governance: Lumière Studios provides non-licensed technical design support only. All instruments of service are intended for coordination and visualization; deliverables must be reviewed and stamped by the licensed professional of record prior to construction. We prioritize technical precision while maintaining strict governance over build-liability. Minimum Project Engagement: $2,000

Architect with 30 years of experience. Construction management and project control for buildings, urban development, and infrastructure. Architectural design (single-family and multi-family homes, adm... Read more

Architect with 30 years of experience. Construction management and project control for buildings, urban development, and infrastructure. Architectural design (single-family and multi-family homes, administrative buildings, industrial warehouses, residential and industrial developments). Modeling with Revit since 2010. Building modeling, interference detection and control between structure/architecture/MEP using BIM methodology. Development of documentation for the construction documents phase. Building surveys using point clouds.

I am a dedicated CAD Designer with expertise in creating accurate 2D drawings, 3D models, and technical documentation. I specialize in transforming concepts, sketches, and engineering requirements int... Read more

I am a dedicated CAD Designer with expertise in creating accurate 2D drawings, 3D models, and technical documentation. I specialize in transforming concepts, sketches, and engineering requirements into high-quality CAD designs that meet industry standards. My technical skills include: * AutoCAD (2D Drafting & Detailing) * Autodesk Revit (Architecture & MEP) * Primavera P6 (Project Planning & Scheduling) * 3D Modeling ( Exterior and Interior ) I am committed to delivering: * Accurate and detailed CAD drawings * High-quality work with attention to detail * On-time project completion * Clear and professional communication * Client satisfaction on every project Whether you need architectural drawings, construction documentation, CAD drafting, drawing conversion (PDF to DWG), or design modifications, I am ready to provide reliable and efficient solutions. I look forward to helping you bring your ideas and projects to life with precision, professionalism, and quality.

Hello there, thanks for visiting, I'm Raphael a detail-oriented 3D Civil & Steel Structural Engineer with strong experience in structural modeling, steel detailing, and industrial building systems, d... Read more

Hello there, thanks for visiting, I'm Raphael a detail-oriented 3D Civil & Steel Structural Engineer with strong experience in structural modeling, steel detailing, and industrial building systems, delivering accurate, code-compliant, and construction-ready designs for residential, commercial, and industrial projects. I specialize in 3D civil and steel structural design using Tekla Structures, with extended expertise in boiler rooms, HVAC, MEP coordination, and chiller systems. My goal is simple: help clients turn engineering concepts into precise, buildable, and cost-effective solutions. 🔧 What I Do Best As a 3D Civil & Steel Structural Engineer | Tekla Structures, I provide end-to-end support from concept modeling to fabrication-ready deliverables. I understand both engineering principles and real-world construction challenges, ensuring that every model is practical, clash-free, and optimized. My services include : ✔ 3D Civil & Structural Modeling ✔ Steel Structure Design & Detailing (Tekla Structures) ✔ Structural Shop Drawings & GA Drawings ✔ Connection Modeling & Detailing ✔ Industrial Steel Structures (plants, frames, platforms) ✔ Boiler Room Structural Layout & Support Systems ✔ HVAC & MEP Structural Coordination ✔ Chiller Plant Structural Design ✔ Clash Detection & Model Optimization ✔ Fabrication-Ready BIM Models Many projects fail due to poor coordination between structure, HVAC, and MEP systems. As a 3D Civil & Steel Structural Engineer | Tekla, MEP & HVAC Design, I ensure: 1. Structural systems properly support HVAC ducts, chillers, boilers, and piping 2. Accurate load consideration for mechanical equipment 3.Clean coordination between steel, mechanical, and electrical layouts 4.Reduced rework, delays, and on-site conflicts I also work confidently on boiler room and chiller system structures, ensuring safe equipment placement, access platforms, and maintenance clearance. Why Choose to Work With Me : ✔ Strong engineering logic, not just modeling ✔ High accuracy and attention to detail ✔ Clear communication and timely delivery ✔ Designs aligned with international standards ✔ Deep understanding of steel fabrication workflows ✔ Experience with industrial and utility-based projects Whether you need a Tekla steel structure, a boiler room structural layout, or full HVAC/MEP structural coordination, I bring both technical expertise and practical insight to your project. 🛠 Tools & Skills : ✔ Tekla Structures ✔ SAP2000 ✔ Bluebeam ✔ AutoCAD ✔ 3D Structural Modeling ✔ Steel Detailing & Fabrication Drawings ✔ Civil & Structural Engineering Principles ✔ HVAC & MEP Coordination ✔ Boiler Room & Chiller System Design ✔ BIM & Clash Detection ✔ Construction-Ready Documentation Kindly do well to leave me a message with your project details and requirements, I'll be glad to discuss timeline and deliverables to your goal Thank you

I am a German-qualified electrical engineer (B.Eng., Electrical Engineering - Energy and Information Technology) with more than seven years of experience in electrical MEP design for buildings. I work... Read more

I am a German-qualified electrical engineer (B.Eng., Electrical Engineering - Energy and Information Technology) with more than seven years of experience in electrical MEP design for buildings. I work remotely as a design and BIM resource for MEP consultants, architects and contractors, producing complete and coordinated electrical documentation under the direction of your Engineer of Record. My day-to-day work covers power distribution, from service, feeder and branch layouts to load and short-circuit calculations, voltage drop, cable and conduit or tray sizing, panel schedules and single-line diagrams. On the lighting side I handle interior, exterior and egress lighting with illuminance calculations and layouts in DIALux evo. I also cover low-voltage and ELV systems such as telecom and data, fire alarm layouts, access control and security, together with earthing and lightning protection. What I hand over are full construction document sets with plan drawings, schedules, details, specifications and tender documents. I model in Revit MEP, run clash detection in Navisworks and exchange IFC. I am equally comfortable taking over incomplete or inconsistent drawings, checking them for code compliance, constructability and coordination conflicts, and reissuing a clean, buildable set. I work through schematic design, design development and construction documents, which corresponds to German HOAI phases 1 to 8, including as-built and revision documentation. I design to international standards and adapt to the code framework of each project, including NEC (NFPA 70), NFPA 72, IES, ASHRAE 90.1, IECC, IEC, BS and the European VDE, DIN and EN standards. Project experience covers hospitals and clinics, government and police facilities, offices, hotels, schools and industrial and logistics buildings, among them a police headquarters, a US clinic, a university hospital, an ICE rail depot, a steel production facility and a four-star hotel. Software I use daily: Revit MEP, AutoCAD, Navisworks, DIALux evo, Simaris Design, Caneco BT and PV*SOL. I work fully remote with fast turnaround, I am fluent in English and German, and I am available for one-off packages as well as ongoing overflow capacity.

I am Mechanical Engineer I can do : − Proficient skill on using Microsoft Office including Word, Excel, Outlook. − Proficient skill in using graphics software as Revit MEP, AutoCAD MEP, Invento... Read more

I am Mechanical Engineer I can do : − Proficient skill on using Microsoft Office including Word, Excel, Outlook. − Proficient skill in using graphics software as Revit MEP, AutoCAD MEP, Inventor,Navisworks, Revit Architect, especially Revit MEP. − Using Revit MEP proficient to calculate and design in 2D, 3D − Fire fighting system − Plumbing system(Domestic Cold Water , Domestic Hot Water, Sanitary) − Electrical system(trunking, Ladder Cable Tray..) − Air-Conditioning system − Air Compressor System − HVAC System, Hydraulic Pipeline System and. − Good skills of debating, organizing/coordinating, inter-personal communication. BIM Services for MEP : -BIM Model: -BIM 3D Modeling Services( Architecture, Structure & MEP) -Clash Detection & Co-ordination (Architecture, structure, MEP, HVAC, Piping services,) BIM Cost Estimating and Quantity Takeoff -3D BIM Model for MEP Coordination -HVAC Ducting 3D BIM Modeling -Plumbing Line 3D BIM Modeling

⭐ Over 3 Years of Engineering Expertise ⭐ 30+ Successful Projects ⭐ Precision in Design, Simulation, and Analysis ⭐ Specialized in Renewable Energy and HVAC Solutions ⭐ Certified in SolidWorks, A... Read more

⭐ Over 3 Years of Engineering Expertise ⭐ 30+ Successful Projects ⭐ Precision in Design, Simulation, and Analysis ⭐ Specialized in Renewable Energy and HVAC Solutions ⭐ Certified in SolidWorks, ANSYS, and AutoCAD Hi, I'm Hafiz Waqar Ul Haq, a Mechanical Engineer with a strong foundation in CAD design, finite element analysis (FEA), and renewable energy systems. My career is driven by a passion for creating innovative solutions that contribute to sustainable development and industrial efficiency. What I Offer: ➤ CAD Design & 3D Modeling: Expert in SolidWorks, AutoCAD, Fusion360, and Revit MEP for creating precise and detailed 3D models, assemblies, and 2D drawings ready for manufacturing. ➤ FEA & Simulation: Specialized in conducting complex simulations using ANSYS and Abaqus, including thermal and vibration analysis for mechanical components. ➤ Renewable Energy Projects: Experience in designing solar-powered systems, including PV panel efficiency enhancement, solar-powered train cabins, and off-grid solar solutions, contributing to significant reductions in CO2 emissions. ➤ HVAC & Building Energy Solutions: Proficient in developing and analyzing HVAC systems using tools like HAP and Cool Selector 2, focusing on optimizing energy efficiency in buildings. ➤ Prototyping & Manufacturing: From conceptual design to final prototype, I ensure that every project is executed with attention to detail, leveraging advanced tools to deliver functional and manufacturable solutions. Key Projects: Solar-Powered Train Cabins: Developed a 100 kW off-grid solar system for railway cabins, presented at AutoConex, and published in the conference’s book of abstracts. PV Panel Efficiency Enhancement: Achieved a 17.64% increase in PV panel efficiency by optimizing heat extraction processes, extending the lifecycle of solar cells. Vibration Analysis of Beams: Conducted modal analysis on various beam structures using MATLAB, Abaqus, and ANSYS, comparing experimental and analytical results. Building Cooling Load Software: Created software for cooling load analysis in Pakistani cities, optimizing HVAC designs for human comfort. Software Proficiency: ✔ SolidWorks ✔ AutoCAD ✔ Fusion360 ✔ ANSYS ✔ Abaqus ✔ PVsyst ✔ Revit MEP ✔ Python ✔ Matlab Let’s Bring Your Ideas to Life: Whether you're looking to enhance product design, improve energy efficiency, or develop cutting-edge mechanical solutions, I’m here to help. Let’s collaborate to turn your concepts into reality with precision, innovation, and sustainability at the forefront. 📌 Ready to get started? Click 'Invite to Job' and let’s discuss how I can contribute to your next project. Best Regards, Hafiz Waqar Ul Haq

I am a multidisciplinary architectural, structural, and MEP designer with over 8 years of experience delivering residential and commercial projects for U.S.-based clients. I specialize in developing d... Read more

I am a multidisciplinary architectural, structural, and MEP designer with over 8 years of experience delivering residential and commercial projects for U.S.-based clients. I specialize in developing detailed construction documents, permit sets, 3D BIM modeling, and coordination drawings using Revit, AutoCAD, SketchUp, Tekla Structures, and Lumion. I have extensive knowledge of the Florida Building Code (FBC), California Residential Code (CRC), and Eurocode, and I work with precision to meet municipal and client standards. My expertise includes: Full residential permit drawings (floor, roof, foundation, framing, elevation) Decks, additions, garages, and ADUs Structural drafting and detailing (timber, steel, concrete) MEP layouts and coordination Revit family creation in imperial units (per U.S. standards) Code-compliant notes and details As-built and remodel drawings Tools I Use: Revit | AutoCAD | SketchUp | Tekla | Lumion | Bluebeam I'm detail-oriented, deadline-driven, and flexible with communication to deliver exactly what clients need. Let’s collaborate to bring your project to life — accurately and on time!

Mechanical Engineer specializing in CFD and FEA simulation, with ANSYS expertise built through academic research and live industry work. I run Zenith Engineering Services, offering simulation-driven e... Read more

Mechanical Engineer specializing in CFD and FEA simulation, with ANSYS expertise built through academic research and live industry work. I run Zenith Engineering Services, offering simulation-driven engineering support backed by real documentation, not black-box results. My core strength is multiphase flow and erosion analysis. My final year project used ANSYS Fluent's DPM with the Oka erosion model to study erosion on 3D-printed polymer sieve meshes under slurry flow, validated with a Taguchi L9 DOE campaign and SEM/EDX material analysis — giving me practical depth in setups that hold up against real experimental data. I also work across FEA (structural, thermal, FSI/coupled analysis) and CAD design in SolidWorks, AutoCAD, Fusion 360, CATIA, and Creo, from concept modeling to detailed engineering drawings. On the product development side, I bring GD&T and DFM (design-for-manufacturing) experience, additive manufacturing know-how (FDM with PLA/ABS), and hands-on exposure to thermodynamic systems — carrying designs from concept through to production-ready output. I'm currently a Safety Trainee Engineer on an MEP firefighting project, which has sharpened my eye for technical documentation and compliance-grade accuracy. What I bring: Documented mesh independence and convergence checks, not just final numbers Practical troubleshooting with boundary conditions, DPM, and multiphase coupling CAD-to-simulation fluency across multiple platforms GD&T, DFM, and additive manufacturing experience for production-ready designs Clear communication and realistic timelines If your project needs CFD, FEA, CAD, or manufacturing-ready product design, let's talk.

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

I am a mechanical engineer and i am a professional autocad and revit MEP trainer. I have been working in the hvac industry as a design engineer for hvac and fire fighting.I can do other tasks related... Read more

I am a mechanical engineer and i am a professional autocad and revit MEP trainer. I have been working in the hvac industry as a design engineer for hvac and fire fighting.I can do other tasks related to mechanical engineering.I have done many modeling projects and can perform simulation in ansys. My area of expertise is materials but i can do any job related to mechanical engineering

I am a professional 2D CAD Drafting Specialist with strong experience in AutoCAD floor plans, technical drawings, and PDF to DWG conversion. I provide accurate, clean, and detail-oriented drafting ser... Read more

I am a professional 2D CAD Drafting Specialist with strong experience in AutoCAD floor plans, technical drawings, and PDF to DWG conversion. I provide accurate, clean, and detail-oriented drafting services for architectural and MEP projects. My expertise includes: • 2D AutoCAD drafting • Floor plan drawing and modification • PDF/JPG/Sketch to DWG conversion • Fire Alarm (FA) layout drafting • Wiring and device layout drawings • As-built drawing preparation • Redrawing from scanned plans I focus on precision, proper layer management, clear annotations, and industry standards to ensure professional-quality drawings. I always deliver work on time and maintain clear communication with clients. Client satisfaction and accuracy are my top priorities. If you need reliable and high-quality CAD drafting support, I am ready to assist you.

A Dynamic Design Professional in Architecture and Interior Design with 22+ years of expertise in Residential, Office, Commercial & Hospitality Spatial Planning. Worked with International reputed firm... Read more

A Dynamic Design Professional in Architecture and Interior Design with 22+ years of expertise in Residential, Office, Commercial & Hospitality Spatial Planning. Worked with International reputed firms and having 7 years of experience at Singapore, in Project Management with comprehensive expertise in Interior Fit-out & Construction industry. Proficient in Design Management, Clientele Management, MEP Services and Project Management expertise in execution of projects. Complete knowledge of Technical Expertise like AutoCAD, 3D Modelling & Sketch up, Photoshop Editing and software tools like MS Office (Word, Excel and Powerpoint)

Greetings! My name Tsaqif Al Farrel Ghazali and please call me Farrel. Mechanical Engineer with experience in engineering design, research, and on-site project execution. Currently working as a Projec... Read more

Greetings! My name Tsaqif Al Farrel Ghazali and please call me Farrel. Mechanical Engineer with experience in engineering design, research, and on-site project execution. Currently working as a Project Engineer for chiller and technology water piping systems, installation, and commissioning. Proven ability to manage site activities, coordinate multidisciplinary teams, and ensure compliance with project specifications, QA/QC standards, and client requirements. Experienced in fabrication planning, material coordination, and testing & commissioning processes such as hydrostatic testing, flushing, and passivation. Proficient in SolidWorks, CATIA, and ANSYS, with a strong foundation in structural design and constructability. Passionate about mechanical system execution in high-reliability environments, with strong interest in data center infrastructure, MEP systems, and project-based engineering roles involving site coordination and commissioning.

I AM MECHANICAL ENGINEER. I HAVE INTEREST IN DESIGN FIELD. I HAVE COMPLETED MY TRAINING OF DESIGNING SOFTWARE'S LIKE CATIA , AUTOCAD , REVIT MEP , ETC. AND WANT TO LEARN MORE SO I CAN BE A PROFESSIONA... Read more

I AM MECHANICAL ENGINEER. I HAVE INTEREST IN DESIGN FIELD. I HAVE COMPLETED MY TRAINING OF DESIGNING SOFTWARE'S LIKE CATIA , AUTOCAD , REVIT MEP , ETC. AND WANT TO LEARN MORE SO I CAN BE A PROFESSIONAL IN MY FIELD.

Portfolio: https://engmds.wixsite.com/mahmoud-sukker Civil Engineer with over 11 years of experience in construction and BIM modeling, specializing in Autodesk Revit. I have worked on high-rise and l... Read more

Portfolio: https://engmds.wixsite.com/mahmoud-sukker Civil Engineer with over 11 years of experience in construction and BIM modeling, specializing in Autodesk Revit. I have worked on high-rise and large-scale projects in the UAE, combining strong site experience with advanced digital engineering workflows. I provide professional BIM services including 3D modeling, structural modeling, reinforcement detailing, quantity takeoff, and construction drawings. My work is always focused on accuracy, coordination, and real-world buildability. I also have solid experience in project execution, site supervision, and contractor coordination, which allows me to deliver practical and efficient solutions, not just theoretical models. I can help you with: ✔ BIM Modeling (Revit) ✔ Structural Modeling & Reinforcement ✔ Quantity Takeoff & BOQ ✔ Construction Drawings ✔ BIM Coordination (Architecture, Structure, MEP) ✔ 3D Visualization I am committed to delivering high-quality work, meeting deadlines, and ensuring client satisfaction.

Experience as MEP Modeller with Intel. Any design you can imagine I can perform, any Product and Building design and rendering. Experience in HVAC design, architectural. Got powerful portable works... Read more

Experience as MEP Modeller with Intel. Any design you can imagine I can perform, any Product and Building design and rendering. Experience in HVAC design, architectural. Got powerful portable workstation for amazing renderings.

✨ Mechanical Engineer | CAD • Simulation • MEP Specialist ✨ With 12+ years of cross-functional engineering experience, I bring a strategic blend of design, analysis, and execution. I turn ideas int... Read more

✨ Mechanical Engineer | CAD • Simulation • MEP Specialist ✨ With 12+ years of cross-functional engineering experience, I bring a strategic blend of design, analysis, and execution. I turn ideas into manufacturable, performance-validated, and field-ready solutions—whether it’s a product, a system, or a full-scale building workflow. ⭐Tools: SolidWorks | Fusion 360 | AutoCAD | Revit | ANSYS | SAP2000 | STA4CAD | Inventor | Excel | MS Project Core Expertise: ⭐Design & Product Development End-to-end design of mechanical parts, plastic components, and industrial products—ready for real-world production. ⭐Simulation & Analysis FEA & CFD-based structural, thermal, and fluid flow validation for optimized, reliable performance. ⭐MEP & Project Coordination HVAC, plumbing (clean, waste, fire), BIM clash control, BOQ/BOS documentation, and interdisciplinary integration. Why Work With Me? ⭐Holistic project vision—from concept to execution ⭐Field-tested, buildable solutions ⭐Precision-driven and detail-focused ⭐ Strong communicator across all disciplines ⭐ Fast, focused, and quality-oriented delivery Let’s connect and make your vision real—with results that are engineered to perform.

Hello! I'm a Design & Drafting Engineer specializing in MEP, HVAC, Industrial Piping, Civil, and Architectural drafting and modeling. I help clients transform concepts, sketches, PDFs, and engineering... Read more

Hello! I'm a Design & Drafting Engineer specializing in MEP, HVAC, Industrial Piping, Civil, and Architectural drafting and modeling. I help clients transform concepts, sketches, PDFs, and engineering requirements into accurate, professional, and industry-standard deliverables using the latest Autodesk and engineering software. I provide complete engineering and drafting solutions for industrial, pharmaceutical, commercial, residential, and infrastructure projects

I graduated Technical University of Constructions Bucharest - Faculty of Geodesy and Cadastre and I'm looking for a home based collaboration. I have over 15 years work experience in topographical su... Read more

I graduated Technical University of Constructions Bucharest - Faculty of Geodesy and Cadastre and I'm looking for a home based collaboration. I have over 15 years work experience in topographical survey and levelling, project management: - Experience with working in a lot off Software such as AutoCAD, Civil 3D, Autodesk Revit, SketchUp, Cad&Pillar; -Designing and making plans for buildings, parcels of property, roads, railways and bridges, rehabilitation whites of rivers, irrigation and drainage networks; - Designing buildings projects using Autodesk Revit BIM software for structural design, MEP engineering, and construction; - Highly experienced in Total Station, Levels and GPS and their associated software (Trimble 5503 Servo Total Station Laser; Geodimetere 510N Total Station, Theo 010a, 020b Theo, Koni Level 007, Trimble S6 Total Station, GPS Trimble R3). Starting June 2003 I worked as Land Surveyor for RomProiect International, a Roumanian company which has developed numerous projects as construction of AFI Palace Bucharest Mega Mall, owned by AFI Europe, part of Africa Israel Group. Starting November 2008, the Canadian company, SNC Lavalin, took over the Romanian company Romproiect. After 4 years working for SNC Lavalin as Senior Land Surveyor, I grabbed the opportunity to be part of the team working on the new Bucharest Metro Line with 7 new stations. 4 years I worked as a Senior Land Surveyor for A.T.C. - Actual Tera Construct, Beneficiary SOLDATA GROUP where I coordinated the work of the surveying team for this project, including building surveys. In present I work as Project Manager at Metrorex, Coordinating the surveying department of Bucharest Subway . Also I have a contract for designing forest roads using Civil 3D software with a roumanian design company, ProForest.

🏆 Expert in Autocad, Revit 🏆 5+ years of experience 🏆 Available 24/7 🏆 Quality Assured Thanks for visiting my profile. I'm Sharif With over 5+ years of experience in residential/commercial design... Read more

🏆 Expert in Autocad, Revit 🏆 5+ years of experience 🏆 Available 24/7 🏆 Quality Assured Thanks for visiting my profile. I'm Sharif With over 5+ years of experience in residential/commercial designing/drafting. I specialize in architectural and construction detailing, with particular focus on architectural design solutions. What Services I offer include 💥 ✅ 2D/ 3D Floor Plan / House plan Design ✅ Architectural 2D drawings ✅ Architectural Technical drawings ✅ Architectural 3D modeling ✅ Furniture drawings, Evacuation plan ✅ MEP drawings ✅ Residential / Commercial Drafting / Designing (IBC, NCS & AS100) ✅ Civil drawings: Site plan, landscaping, Survey layout, contour map. ✅ Construction documentation detailing, MEP drawings ✅ As-built drawings, Office planning, Shop drawings, Conceptual drawings ✅ Architectural Presentational Drawings ✅ PDF to CAD, Hand sketch to CAD, Matterport to CAD Conversion SOFTWARE SKILLS 🔥 🎓 AutoCAD 🎓 Revit 🎓 Sketchup 🎓 Twinmotion 🎓 Lumion 🎓 Adobe Suite (Photoshop, Illustrator) I'm dedicated to building long-term relationships with my clients. offering one-stop architectural design solutions for your company. I would love to provide you with assured quality with design consultation, and enjoyable work with me. Let's start the incredible journey together.

I am a multidisciplinary CAD and BIM professional specializing in end-to-end project delivery and workflow optimization. My expertise spans Architectural, Structural, and MEP design, ensuring that eve... Read more

I am a multidisciplinary CAD and BIM professional specializing in end-to-end project delivery and workflow optimization. My expertise spans Architectural, Structural, and MEP design, ensuring that every facet of a building works together flawlessly. I don't just build models; I engineer custom solutions to make drafting and design highly efficient. Alongside advanced 3D modeling and rendering, I develop custom scripts and add-ins—such as Python and C# tools for Revit, AutoLISP routines for AutoCAD, and Ruby plugins for SketchUp—to automate complex tasks, increase precision, and drastically reduce project turnaround times. Core Capabilities: - Comprehensive BIM & CAD: Deep expertise in Revit, AutoCAD, SketchUp, and 3ds Max for architectural, structural, and MEP layouts. - Coordination & Estimation: Rigorous clash detection using Navisworks Manager and accurate model-based budget estimation. - Workflow Automation: Custom tool development (Ruby, AutoLISP, Python, C#) for tasks like automated HVAC duct routing, CAD-to-BIM wall generation, and intelligent geometry cleanup. - Visualization & Presentation: Photorealistic rendering using D5 and Enscape, paired with expert post-production and layout design in Photoshop and Illustrator.

I am a Mechanical Engineer with 4 years of experience in CAD and BIM design, specializing in SOLIDWORKS, AutoCAD, CATIA, and Revit. I have expertise in 3D modeling, product design, mechanical assembli... Read more

I am a Mechanical Engineer with 4 years of experience in CAD and BIM design, specializing in SOLIDWORKS, AutoCAD, CATIA, and Revit. I have expertise in 3D modeling, product design, mechanical assemblies, manufacturing drawings, and engineering documentation. My experience also includes BIM modeling, MEP design, and the development of civil and structural plans. I am skilled in creating accurate, detailed, and production-ready designs while ensuring compliance with engineering standards and project requirements. I have worked on diverse engineering projects, transforming concepts and specifications into high-quality 2D drawings, 3D models, and coordinated BIM solutions. I am passionate about delivering efficient, innovative, and practical design solutions for industrial and construction projects.

Am a results-driven Mechanical Design Engineer with 8+ years of experience delivering innovative, cost-effective mechanical systems, components, and prototypes. Proficient in SolidWorks (3D modeling,... Read more

Am a results-driven Mechanical Design Engineer with 8+ years of experience delivering innovative, cost-effective mechanical systems, components, and prototypes. Proficient in SolidWorks (3D modeling, sheet metal, FEA simulation), ANSYS for finite element analysis, Autodesk Inventor, AutoCAD, LANTEK and LIBELLULA Sheet metal cutting optimization. I specialize in designing manufacturable parts and assemblies, performing tolerance analysis, GD&T application, engineering calculations, simulations, and ensuring compliance with safety, quality, and industry standards (e.g., ASHRAE, BS). In MEP building services, I excel at creating integrated systems for HVAC, plumbing, and electrical designs. Using Revit MEP, AutoCAD MEP, and HAP for load calculations, I've prepared shop drawings, coordination drawings, and as-built documentation for complex projects, ensuring 100% installation accuracy and seamless revisions. My work supports architects, consultants, and site teams in resolving onsite issues, maintaining version control, and adhering to project specs—reducing rework and enhancing efficiency in construction environments. Key achievements include: Reducing component weight by 40%+ and improving strength via ANSYS FEA, cutting manufacturing and lifecycle energy use. Shortening design-to-prototype cycles by 70% through optimized modeling and simulations. Boosting team deadline adherence by 60% with efficient CAD workflows and project management (MS Project, ClickUp, Agile/Lean). Overseeing prototype development, physical testing, validation, BOM/BOQ preparation, technical drawings, and cross-functional collaboration to resolve manufacturing/field issues. From steel structures and elevators to MEP systems and fuel-efficient vehicle designs (Shell Eco-Marathon project: 200% weight reduction), I bring hands-on fabrication knowledge, laser cutting optimization, and a focus on precision and efficiency. Passionate about mechanical engineering in manufacturing, energy, automotive, MEP building services, and product development. Ready to help turn your concepts into high-quality, compliant products on time and within budget. Let's discuss your project—message me today!

B.S. Civil Engineer & CAD Specialist specializing in permit-ready drawing packages, MEP schematics, and site/utility plans. Experienced in converting rough redlines and field surveys into code-complia... Read more

B.S. Civil Engineer & CAD Specialist specializing in permit-ready drawing packages, MEP schematics, and site/utility plans. Experienced in converting rough redlines and field surveys into code-compliant, production-grade .DWG sets with complete dimensioning and equipment legends.

Experienced Mechanical Design Engineer with a demonstrated history of working in Mega projects in infrastructure design . Skilled in P&ID , Pipe sizing ,selection, 3D Modelling , Microsoft Word, Compu... Read more

Experienced Mechanical Design Engineer with a demonstrated history of working in Mega projects in infrastructure design . Skilled in P&ID , Pipe sizing ,selection, 3D Modelling , Microsoft Word, Computer-Aided Design (CAD), Revit MEP, and Drawing. Strong engineering professional with a B.SC focused in Mechanical engineering from Higher Technological Institute

Hello! I'm Abhijeet Verma, a BIM Engineer and Top Rated Plus professional on ▒▒▒▒▒▒, leading a dedicated team of architects, civil engineers, and BIM experts at The Zenith Visions. With a strong found... Read more

Hello! I'm Abhijeet Verma, a BIM Engineer and Top Rated Plus professional on ▒▒▒▒▒▒, leading a dedicated team of architects, civil engineers, and BIM experts at The Zenith Visions. With a strong foundation in Revit and other industry-leading software, we specialise in delivering accurate, high-quality, and cost-effective BIM solutions tailored to your project needs. ◼ Our Expertise: 🔹 Scan to BIM: We convert point cloud data into detailed Revit models, covering Architectural, Structural, and MEP disciplines. 🔹 Joinery & Millwork Drafting: From cabinetry to custom furniture detailing, we deliver precision-driven shop drawings. 🔹 CAD/PDF/Sketch to BIM: We convert 2D data into intelligent Revit, ArchiCAD, and SketchUp models. 🔹 Revit Family Creation: Custom parametric families tailored to unique project requirements. 🔹 3D Modeling & Visualization: High-quality models, photorealistic renderings, walkthroughs, and animations. 🔹 Topography & Site Modeling: Realistic terrain modeling for comprehensive site understanding. 🔹 Construction Documentation: We produce interior CD & DD sets, façade detailing, and permit-ready technical drawings. 🔹 Container Architecture: Specialized in creating permits and construction drawings for modular and container-based structures. ◼ Software Proficiency: Revit | AutoCAD | ArchiCAD | SketchUp | Chief Architect | Navisworks | Enscape | Twinmotion | Lumion ◼ My Experience: With over 500 successfully delivered projects across residential, commercial, and industrial sectors, we’ve built a strong reputation for accuracy, reliability, and excellence. I've worked on projects in various countries, including Australia, the UK, the US, and Switzerland. This global experience has broadened my architectural expertise and adaptability to different design and regulatory contexts. ◼ Why Work With Us: 🔹 Commitment to Precision and Detail 🔹 On-Time Delivery, Every Time 🔹 Transparent and Collaborative Communication 🔹 A Track Record of Client Satisfaction If you're seeking a reliable team that can transform your ideas into precise, construction-ready models and documentation, I’d be glad to connect and collaborate. Let’s create something exceptional together!