Hire the best KiCAD PCB experts for your company

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industr... Read more

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industrial projects

Hello, Everyone! I am an embedded systems engineer, PCB designer, and firmware developer with over 10 years of professional experience. I provide complete, end-to-end solutions for a wide range of ele... Read more

Hello, Everyone! I am an embedded systems engineer, PCB designer, and firmware developer with over 10 years of professional experience. I provide complete, end-to-end solutions for a wide range of electronic device designs, supporting clients from initial concept and schematic design to PCB layout, prototyping, assembly, and full system testing. I have strong expertise in high-speed PCB design, including PCIe and DDR4 routing, as well as precise impedance matching for reliable performance at high frequencies. I also specialize in RF and antenna design for modern IoT devices, ensuring optimal signal integrity and system efficiency. In addition, I have deep experience in ultra-low power design, achieving microamp and sub-microamp current consumption for battery-operated and wearable systems. I specialize in firmware development for LTE-GPS-LoRa-BLE-based embedded systems (nRF52 series), including low-power optimization and high-precision sensor acquisition. My focus is on delivering robust, production-ready solutions with high reliability and performance. 🔥 Main Skills 👉Embedded Systems 👉Schematic Circuit Design(Low Power consumption Design) 👉Firmware Development(All Microcontrollers-STM32, TMS320, ESP32, FPGA, nRF52, Raspberry PI) 👉PCB Design(High speed signal routing, PCIe, DDR4, 18 multi-Layers Design, RF antenna Design,) using Altium Designer, KiCad, EasyEDA, Fusion 360(No problem in DFM-JLCPCB) 👉IoT with nRF52(BLE), LoRa(for example, SX1262), LTE(SIM card interface), GPS and other variety of sensors 🛠️Tools & Technologies: 👉 nRF5 SDK / nRF Connect SDK 👉SEGGER Embedded Studio + J-Link debugging 👉 C/C++ (bare-metal & RTOS) 👉 BLE GATT, LTE AT commanders, custom wireless protocols 👉SPI / I2C / UART / ADC integration 👉Low-noise measurement systems (nA level) 👉STM32CubeIDE, Cube MX, Keil, CCS, Arduino, ... 👉MQTT, Free RTOS, Zephyr RTOS 🚀 I can support your project from concept to production.

I am a skilled PCB Design and Electronics Engineering professional with experience in schematic design, PCB layout, and embedded systems development. I specialize in creating high-quality, manufactura... Read more

I am a skilled PCB Design and Electronics Engineering professional with experience in schematic design, PCB layout, and embedded systems development. I specialize in creating high-quality, manufacturable PCB designs for Arduino, ESP32, IoT, automation, and electronic product projects. My services include: PCB layout and routing Schematic design Gerber and manufacturing files Multi-layer PCB design Component selection and BOM preparation 3D PCB visualization Prototype-ready circuit boards I work with tools such as KiCad, Altium Designer, EasyEDA, and Proteus to deliver clean and efficient designs with attention to detail and performance. I am committed to clear communication, fast delivery, and client satisfaction while helping businesses, startups, and individuals turn their electronic ideas into reality.

Comprehensive Product Development Services Under One Roof At our company, we provide end-to-end product development services, all conveniently managed under one roof. Our team of seasoned professiona... Read more

Comprehensive Product Development Services Under One Roof At our company, we provide end-to-end product development services, all conveniently managed under one roof. Our team of seasoned professionals is committed to delivering exceptional quality at every stage of the development process. From ideation and design to prototyping, testing, and manufacturing, we specialize in turning concepts into fully realized products. Leveraging state-of-the-art facilities and cutting-edge technology, we craft innovative solutions tailored to meet the unique needs of each client. We pride ourselves on delivering projects on time and within budget, without compromising on quality. Trust us to transform your product ideas into reality with our complete, turnkey development services.

🎯End-to-End Hardware & Embedded Systems Development We are a specialized engineering team focused on turning concept sketches and product requirements into production-ready electronic hardware. Opera... Read more

🎯End-to-End Hardware & Embedded Systems Development We are a specialized engineering team focused on turning concept sketches and product requirements into production-ready electronic hardware. Operating at the intersection of circuit design, firmware architecture, and physical enclosure integration, we bridge the gap between abstract code and manufactured reality. If you are building IoT devices, smart hardware products, or custom automation equipment, we manage the complete development lifecycle—ensuring your electronics work reliably on the bench and seamlessly fit your physical product constraints. Core Expertise & Capabilities: 🔷Advanced PCB Layout & Schematic Capture: Multi-layer designs, high-speed routing, power management, and RF considerations using industry-standard tools (Altium Designer, KiCad). 🔷Embedded Firmware Development: Bare-metal and RTOS-based firmware development, sensor integration, wireless communication protocols (BLE, Wi-Fi, LoRa, Zigbee), and custom peripheral drivers. 🔷Electro-Mechanical Integration: Designing circuit boards to fit precisely inside custom 3D enclosures, minimizing iteration loops between mechanical constraints and electrical placement. 🔷Prototyping & DFM (Design for Manufacturing): Generating precise Gerber files, BOMs (Bill of Materials), and assembly documentation optimized for smooth transition to PCB assembly houses. 🔷Lab Testing & Bring-Up: Rigorous testing utilizing professional bench equipment (oscilloscopes, power supplies, logic analyzers) to ensure hardware stability before mass production. Why Partner With Us?🤝 We don't just write code or draw schematics in isolation; we view every project through the lens of manufacturability and real-world performance. Whether you need a standalone board layout or an entire prototype built from scratch, we deliver clean, scalable, and production-ready documentation. Let’s build something functional and robust. Reach out to discuss your hardware specifications!

I am an Electrical Engineering student at NUTECH Islamabad with hands on experience in PCB design and embedded systems I design custom PCBs in KiCad from scratch — starting from schematic all the way... Read more

I am an Electrical Engineering student at NUTECH Islamabad with hands on experience in PCB design and embedded systems I design custom PCBs in KiCad from scratch — starting from schematic all the way to Gerber files ready for manufacturing. My designs are clean DRC verified and optimized for real world manufacturing at fabs like JLCPCB and PCBWay Projects I have designed: Arduino Nano Breakout Board with full pin breakout screw terminals reset button and reverse polarity protection Custom ESP32 development board Custom Arduino Nano board Bidirectional Visitor Counter Smart Irrigation System Line Follower Robotics What I bring to your project: Complete KiCad workflow from schematic to layout to Gerbers 2-layer pr multi-layer PCB design optimized for low cost manufacturing Proper design rules clearances and DRC verification and EMI verification as well before delivery Clean silkscreen labelling and 3D verification of every board I take your idea and turn it into a manufacturable board ready to order

Antenna designer -Circuit Design -PCB Designer -ARDUINO IDE 3D Modelling AutoCAD -javascript -python -mobile app develpment (android , IOS) -solidworks - CST Microwave Studio -ANSYS HFSS -Sonar equip... Read more

Antenna designer -Circuit Design -PCB Designer -ARDUINO IDE 3D Modelling AutoCAD -javascript -python -mobile app develpment (android , IOS) -solidworks - CST Microwave Studio -ANSYS HFSS -Sonar equipment Operation and maintenance -Radar operator and maintenance maintenance . -MATLAB , Simulink , GUI -Multisim, Kicad -C++C++ -Logo Design -Adobe Photoshop -Radar System Engineer and underwater acoustic -Microwave

I design manufacturable, production-ready PCBs with a focus on power electronics — particularly DC-DC converter layouts, where getting the copper pours, thermal relief, and switching-loop geometry rig... Read more

I design manufacturable, production-ready PCBs with a focus on power electronics — particularly DC-DC converter layouts, where getting the copper pours, thermal relief, and switching-loop geometry right is the difference between a board that works on paper and one that works on the bench. With a few years of industry experience as a PCB designer, I can work in both KiCad and Altium Designer, from schematic capture through layout, Gerbers, and BOM handoff to manufacturing. What I can help with: General mixed digital-analog 2–8 layer board design Schematic capture and layout from your requirements or reference design Buck/boost converter layout — hot-loop minimization, current-carrying trace sizing, copper pour and thermal management Design-risk flagging before it becomes an expensive fab mistake

I am a dedicated Electronics Engineer with over 5 years of experience specializing in mixed-signal hardware design, PCB routing, and embedded systems. I partner with clients to turn their initial conc... Read more

I am a dedicated Electronics Engineer with over 5 years of experience specializing in mixed-signal hardware design, PCB routing, and embedded systems. I partner with clients to turn their initial concepts into manufacturable, error-free prototypes. My core expertise includes: Schematic capture and precise PCB layout using [Insert your software, e.g., KiCad / Altium / Eagle] Microcontroller integration, specifically STM32 and AVR architectures Design for Manufacturing (DFM) and thorough Design Rule Checking (DRC) BOM optimization to ensure cost-effective production Whether you need a complete hardware system designed from the ground up or a professional second pair of eyes to audit your existing schematics before you order boards, I deliver precise, reliable results. I pride myself on excellent communication and delivering files perfectly prepped for manufacturing.

I am a Mechatronics and Mechanical Engineer with 12+ years of experience delivering end-to-end product solutions. I specialize in taking complex ideas from initial 3D CAD concepts to fully integrated,... Read more

I am a Mechatronics and Mechanical Engineer with 12+ years of experience delivering end-to-end product solutions. I specialize in taking complex ideas from initial 3D CAD concepts to fully integrated, manufacture-ready physical prototypes. Tools: SolidWorks, SolidEdge, Fusion 360, Onshape, FreeCAD, Blender, 3ds Max Core Skills: 3D CAD Modeling, Electromechanical Integration, Rapid Prototyping, and End-to-End Product Development Project Highlights: M3D Enabler: Architected and designed a complete, commercial desktop 3D printer from the ground up. PhysLab Apparatus: Designed intricate, high-precision scientific and robotic apparatuses for advanced laboratory research. M3D Go & PhysLogger: Engineered modular educational robotics kits and complex hardware ecosystems for data acquisition. Education: M.Sc. Mechatronics Engineering B.Sc. Mechanical Engineering

Designer with 6 years experience in custom electronic products, from prototype to fabrication stage. Previously has worked for global AV brand and learned the basics there

Designer with 6 years experience in custom electronic products, from prototype to fabrication stage. Previously has worked for global AV brand and learned the basics there

I am an Electrical Engineer specializing in electronic hardware and PCB design, with a focus on RF, high-speed interfaces, signal integrity, embedded systems, and manufacturable electronic products.... Read more

I am an Electrical Engineer specializing in electronic hardware and PCB design, with a focus on RF, high-speed interfaces, signal integrity, embedded systems, and manufacturable electronic products. I support both complete hardware development and focused engineering work such as PCB design review, troubleshooting, electromagnetic simulation, signal-integrity analysis, layout optimization, and preparation for manufacturing. My work covers the complete hardware development cycle, including system architecture, component selection, schematic capture, multilayer PCB layout, power architecture, prototype bring-up, debugging, validation, DFM/DFT, and manufacturing release. A recent project involved the electromagnetic analysis and optimization of a GMSL2 serializer-to-FAKRA PCB interconnect operating up to 6 GHz. I developed a KiCad-to-openEMS simulation workflow to evaluate S-parameters, return loss, impedance, transmission-line geometry, connector launches, via structures, anti-pads, and reference-plane discontinuities. I also develop embedded and industrial hardware using STM32 and ESP32 platforms, cellular connectivity, GNSS, LoRaWAN, CAN, RS-485, Ethernet, BLE, Wi-Fi, sensors, industrial interfaces, low-power electronics, and battery-powered systems. Typical projects I support include: — Complete schematic and PCB development — RF and high-speed PCB design — Multilayer and controlled-impedance layouts — PCB design review before fabrication — Existing hardware troubleshooting and redesign — Signal-integrity and electromagnetic analysis — Embedded and industrial IoT hardware — Power-management circuits — Prototype bring-up and validation — BOM optimization and component selection — DFM, DFT and manufacturing documentation I have experience across industrial R&D, freelance engineering, hardware validation, and test engineering, including two years in R&D at Furukawa Electric. My main engineering tools include KiCad, Altium Designer, openEMS, Python, EasyEDA Pro, and ParaView. I also maintain my own electronics bench with an oscilloscope, spectrum analyzer, soldering equipment, and rework tools for prototype assembly, bring-up, troubleshooting, and validation. My objective is not simply to complete a PCB layout, but to deliver hardware that is electrically robust, manufacturable, testable, and ready for the next stage of product development. If you have a new hardware design, a PCB approaching fabrication, or an existing board that is not performing as expected, I can review the requirements and recommend the most effective path forward.

Mechatronics engineer with hands-on experience in CAD, circuit design, embedded systems, and system design. I have successfully designed and built projects such as a maize milling machine and a plane... Read more

Mechatronics engineer with hands-on experience in CAD, circuit design, embedded systems, and system design. I have successfully designed and built projects such as a maize milling machine and a plane tire lifting system, managing them from concept to completion. Skilled in delivering standalone, fully functional mechanical and electrical systems, I combine practical engineering knowledge with innovative solutions to create meaningful, high-quality projects.

PCB designer specializing in embedded systems and industrial IoT hardware with 2+ years of hands-on experience and 100+ completed projects. I work beyond schematics, contributing to system architectur... Read more

PCB designer specializing in embedded systems and industrial IoT hardware with 2+ years of hands-on experience and 100+ completed projects. I work beyond schematics, contributing to system architecture, power design, and platform selection to build reliable, manufacturable products. Experienced in mains-powered and battery-backed designs, low-power systems, cellular IoT, and compact, safety-aware PCB layouts. I design with DFM in mind, iterate based on real-world testing, and communicate clearly throughout the project.

I am an Electronics & Communication Engineer specializing in Analog IC Design, VLSI, mixed-signal circuits, semiconductor engineering, and hardware development, with additional experience in technical... Read more

I am an Electronics & Communication Engineer specializing in Analog IC Design, VLSI, mixed-signal circuits, semiconductor engineering, and hardware development, with additional experience in technical research, project execution, and engineering documentation. My primary expertise is transistor-level analog circuit design and simulation using Cadence Virtuoso and CMOS technologies. I have worked with differential amplifiers, current mirrors, common-source amplifiers, cascode and folded-cascode architectures, biasing circuits, current sources, CMOS operational amplifiers, two-stage op-amps, and DAC-integrated analog systems. I am comfortable with transistor sizing, bias analysis, circuit optimization, and simulation-driven design. I have experience evaluating gain, bandwidth, GBW, phase margin, gain margin, slew rate, ICMR, CMRR, PSRR, noise, power consumption, stability, DC operating point, transient response, and PVT/corner performance. I can assist with circuit debugging, performance analysis, architecture comparison, and optimization. My VLSI and mixed-signal interests also include PLLs, Phase Frequency Detectors (PFDs), VCOs, frequency-synthesis concepts, feedback systems, and high-speed semiconductor architectures. I have worked on research-oriented exploration of PFD architectures and technical circuit concepts, with interest in research-paper development and patent-oriented innovation. I also have exposure to CMOS layout and physical-design concepts, including device matching, parasitic considerations, layout optimization, and implementation-oriented design. In hardware engineering, I can contribute to PCB design, electronic circuit development, component selection, prototyping, debugging, and system-level hardware projects. My broader technical background includes digital electronics, CMOS logic, RTL concepts, FPGA architecture, semiconductor design methodologies, RTL-to-GDSII flow concepts, basic C and Python, Linux, data analysis, and technical documentation. I can contribute to projects involving Analog IC Design, CMOS Circuit Design, VLSI, Mixed-Signal Design, Cadence Virtuoso, Circuit Simulation, PLL, PFD, VCO, CMOS Layout, PCB Design, Hardware Engineering, Semiconductor Research, Technical Research, and Engineering Documentation. I approach every project systematically: understand specifications, select an appropriate architecture, implement the design, simulate and validate performance, identify limitations, and optimize the final solution. My additional experience in project coordination, stakeholder communication, documentation, and startup operations enables me to contribute effectively to multidisciplinary engineering projects. I am particularly interested in challenging projects involving analog and mixed-signal ICs, VLSI, semiconductor innovation, PLL/PFD/VCO architectures, PCB and hardware development, research, and circuit design.

PCB Design Engineer with over 8 years of experience with strong expertise in multilayer, high-speed, and mixed-signal board design. Skilled in tools such as Cadence Allegro 17.2 X, OrCAD Capture. Pr... Read more

PCB Design Engineer with over 8 years of experience with strong expertise in multilayer, high-speed, and mixed-signal board design. Skilled in tools such as Cadence Allegro 17.2 X, OrCAD Capture. Proficient in schematic capture, component placement, routing, and DFM/DFT compliance. Hands-on experience in ATE boards, test interface boards, and industrial control PCBs. Strong understanding of signal integrity, impedance control, and thermal management. Committed to delivering reliable, manufacturable designs that meet quality and timeline requirements.

I’m a Mechanical Designer with a strong focus on 3D printing, 3D scanning, and reverse engineering. I enjoy taking ideas from concept to reality—whether that means creating precise CAD models, designi... Read more

I’m a Mechanical Designer with a strong focus on 3D printing, 3D scanning, and reverse engineering. I enjoy taking ideas from concept to reality—whether that means creating precise CAD models, designing parts for manufacturing, or developing functional prototypes. I’ve worked across different areas, from automotive reverse engineering to consumer product design, and I like combining both mechanical and electronic skills to solve problems. Alongside CAD and design work, I’ve been building up my experience in electronics, circuits, and embedded systems (Arduino, microcontrollers, and prototyping). Right now, I’m focused on expanding into product development and prototyping while continuing to grow my side projects in 3D scanning, CAD services, and custom fabrication.

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

I have designed a 3d printable electric motor, small robotic arm, and other educational designs. I focus on small scale mechanical designs.

I have designed a 3d printable electric motor, small robotic arm, and other educational designs. I focus on small scale mechanical designs.

College student interest in PCB designing , So that start gain knowledge, skill set regrading the PCB design

College student interest in PCB designing , So that start gain knowledge, skill set regrading the PCB design

My team and I specialize in end-to-end product development across hardware, wireless, and software domains: - Electronics Hardware: From Arduino-based prototypes to industrial-grade STM32, TI, ARM So... Read more

My team and I specialize in end-to-end product development across hardware, wireless, and software domains: - Electronics Hardware: From Arduino-based prototypes to industrial-grade STM32, TI, ARM SoCs, and FPGA-based critical control systems. - Wireless & IoT: Custom RF systems, protocol development, IoT product design, and integration with mobile/web applications. - Software & Cloud: Firmware, custom drivers, backend servers, and data platforms designed specifically for embedded and IoT systems. - Compliance & Safety: Designs following CISPR standards, and application-specific standards for reliable and certified products. - Power Systems: Low-power electronics, SBC development, as well as high-power inverter and converter design with safety standards. We work with startups, R&D teams, and OEMs who want a single partner to handle hardware + firmware + wireless + software seamlessly. Whether you need a rapid prototype or a production-ready, certified solution, we can take you there. If you’re working on your next product idea and want to reduce complexity by working with one partner for the entire stack, let’s connect.

I am an Electronics Engineer specializing in Embedded Systems, PCB Design, Firmware Development, FPGA Design, and MATLAB/Simulink. I help startups, companies, and researchers transform ideas into reli... Read more

I am an Electronics Engineer specializing in Embedded Systems, PCB Design, Firmware Development, FPGA Design, and MATLAB/Simulink. I help startups, companies, and researchers transform ideas into reliable electronic products from concept to production. My expertise includes schematic design, multilayer PCB layout, embedded firmware development, circuit simulation, IoT systems, sensor interfacing, and prototype development. I work with ESP32, STM32, Arduino, AVR, FPGA (Verilog/VHDL), MATLAB, KiCad, Altium Designer, EasyEDA, Proteus, and Multisim. I can assist with: • PCB Design & Layout • Schematic Design • Embedded C Programming • ESP32 & STM32 Firmware • FPGA Development • MATLAB & Simulink • Circuit Simulation • IoT Product Development • Hardware Debugging • Prototype Development I focus on delivering production-ready designs with clear communication, attention to detail, and reliable technical support throughout every project.

I am a Portuguese Electrical Design Engineer with more than eight years of professional experience in industrial automation, intralogistics, generator systems, custom machinery, electrical power infra... Read more

I am a Portuguese Electrical Design Engineer with more than eight years of professional experience in industrial automation, intralogistics, generator systems, custom machinery, electrical power infrastructure, and low-voltage control systems. I prepare accurate electrical documentation using EPLAN, SolidWorks Electrical, and AutoCAD. My services include: • Electrical power and control schematics • Single-line diagrams • Wiring and interconnection diagrams • Terminal plans and cable schedules • Electrical panel layouts • PLC I/O documentation • Bills of materials and component selection (BOM) • Drawing revisions, redlines, and as-built documentation • Conversion of sketches and PDF drawings into editable CAD documentation My professional experience includes electrical design and commissioning support for large automated material-handling systems, including installations with 55 rail-guided vehicles, custom industrial machinery, and generator systems with two medium-voltage generating sets operating in parallel. In addition to design work, I have practical experience with panel verification, I/O checkout, functional testing, FAT/SAT activities, commissioning, and troubleshooting. This field experience helps me create drawings that are clear and practical for panel manufacturing, installation, operation, and maintenance. I am familiar with Siemens automation equipment, SICK sensors, AS-i systems, NORD and Lenze drives, and DEIF, Deep Sea, and ComAp generator controllers. I am available for remote, project-based assignments and ongoing electrical design support. I work professionally in English and Portuguese and can collaborate effectively with European and international engineering teams. My priorities are technical accuracy, organized documentation, responsive communication, realistic deadlines, and professional deliverables in both editable source format and PDF.

I am a Mechatronics Engineering student with a strong interest in PCB design, embedded systems, and electronics product development. I specialize in schematic design, PCB layout, circuit analysis, and... Read more

I am a Mechatronics Engineering student with a strong interest in PCB design, embedded systems, and electronics product development. I specialize in schematic design, PCB layout, circuit analysis, and microcontroller-based systems using platforms such as ESP32, STM32, and Arduino. I am committed to delivering clean, manufacturable PCB designs with attention to performance, reliability, and industry best practices. My technical interests include embedded hardware, IoT systems, robotics, automation, and drone technologies. I am continuously expanding my skills in PCB design tools, embedded programming, and hardware development while working on practical engineering projects. Whether you need assistance with schematic capture, PCB layout, prototyping, or embedded system integration, I am eager to help transform ideas into functional electronic solutions. Skills: • PCB Design & Layout • Schematic Capture • KiCad • Altium Designer • ESP32 & STM32 Development • Arduino Programming • Embedded Systems • Electronics Prototyping • Circuit Debugging • Mechatronics Engineering

Experienced Electronics Engineer/Technician with over 20 years in electronics design, development, repair, and troubleshooting, and more than 10 years specializing in microcontroller firmware developm... Read more

Experienced Electronics Engineer/Technician with over 20 years in electronics design, development, repair, and troubleshooting, and more than 10 years specializing in microcontroller firmware development. Skilled in schematic capture, PCB design, electronic prototyping, and research, with strong expertise across power electronics, optoelectronics, industrial electronics, digital electronics, and analog electronics. Proficient in microcontroller firmware development and well-versed in using electronic CAD tools and simulators including OrCAD, Tango PCB, and PSpice for Windows.

I specialize in PCB design, schematic capture, PCB layout optimization, and architectural CAD drafting for startups, businesses, engineers, and construction professionals. My goal is to deliver clean... Read more

I specialize in PCB design, schematic capture, PCB layout optimization, and architectural CAD drafting for startups, businesses, engineers, and construction professionals. My goal is to deliver clean, manufacturable, and production-ready designs that combine technical precision, functionality, and professional presentation. I work on both electronics and architectural projects, helping clients transform concepts into practical real-world solutions. My PCB design services include: • Schematic Capture • PCB Layout & Routing • Gerber & Drill File Generation • BOM Preparation • Multi-layer PCB Design • 3D PCB Rendering • DFM & Manufacturing Optimization My architectural CAD services include: • Floor Plans • Architectural Drafting • 2D & 3D CAD Modeling • Elevations & Sections • Construction Drawings • Permit Drawings • Space Planning • Rendering & Presentation Drawings Software experience includes KiCad, Altium Designer, EasyEDA, AutoCAD, Revit, SketchUp, and Blender. I focus on clear communication, accuracy, attention to detail, and delivering high-quality work that is ready for manufacturing or construction.

I am an Electronics Engineer specializing in PCB design, embedded systems development, and complete product development from concept to production. My expertise includes schematic design, multilayer... Read more

I am an Electronics Engineer specializing in PCB design, embedded systems development, and complete product development from concept to production. My expertise includes schematic design, multilayer PCB layout, MCU firmware development, hardware debugging, and CAD modeling for enclosures and mechanical integration. I have experience reviewing and optimizing existing designs as well as developing fully custom solutions tailored to technical and business requirements. I support projects across the full development cycle: Requirements analysis and system architecture Schematic capture and PCB layout Microcontroller firmware development Prototyping and validation Design review and optimization Preparation for manufacturing I focus on building reliable, production-ready designs with strong attention to signal integrity, power management, EMI considerations, and manufacturability. My goal is to deliver efficient, robust, and scalable electronic solutions that meet both technical specifications and real-world application needs.