Hire the best freelance ID Construction Details expert designers for your company

Licensed Architect with 14+ years of professional experience across the United States and Europe. Founder of YTARCH, delivering residential and commercial projects with a focus on BIM modeling, constr... Read more

Licensed Architect with 14+ years of professional experience across the United States and Europe. Founder of YTARCH, delivering residential and commercial projects with a focus on BIM modeling, construction documentation, and permit-ready drawing sets. Experienced in transforming 2D drawings into structured 3D building information models and managing projects from design development through approval. Fluent in English and French. Available for project-based and long-term collaboration.

As an architect, I am passionate about design, creativity, and problem-solving. I aim to learn from inspiring professionals, grow through collaboration, and push boundaries in architecture and related... Read more

As an architect, I am passionate about design, creativity, and problem-solving. I aim to learn from inspiring professionals, grow through collaboration, and push boundaries in architecture and related creative fields. With a strong foundation in architectural design and a drive to experiment and innovate, my goal is to contribute meaningful, practical, and imaginative solutions by transforming ideas into built realities.

Technical Drafter with hands-on experience in AutoCAD, Archicad and SketchUp, producing 2D technical drawings, 3D models, floor plans, sections, elevations and construction details. Experienced in ar... Read more

Technical Drafter with hands-on experience in AutoCAD, Archicad and SketchUp, producing 2D technical drawings, 3D models, floor plans, sections, elevations and construction details. Experienced in architectural project documentation, site surveys and measurements, drawing revisions, quantity take-offs and technical documentation. I can assist with CAD drafting, drawing modifications, PDF or sketch to CAD conversion, architectural drawings, technical documentation and SketchUp 3D modelling. I am detail-oriented, adaptable and focused on delivering clear and accurate drawings according to project requirements.

Architect with hands-on experience producing technical documentation for real residential and institutional projects. I work across the full project lifecycle — from Schematic Design through Constru... Read more

Architect with hands-on experience producing technical documentation for real residential and institutional projects. I work across the full project lifecycle — from Schematic Design through Construction Documents — delivering accurate floor plans, sections, elevations, details, and specification schedules. Proficient in AutoCAD 2D, Revit, SketchUp, Twinmotion, V-Ray, and the Adobe Suite. I approach every project with attention to detail and a focus on understanding the full scope before touching the drawings — which translates into cleaner documentation and fewer coordination issues down the line. Available for part-time and freelance projects. Fast turnaround, independent work style, and clear communication in English.

Designing and executing technical drawings to support the design vision is a passion of mine as proficiency in technical drawing is crucial in making our designs come to life. As a licensed interior... Read more

Designing and executing technical drawings to support the design vision is a passion of mine as proficiency in technical drawing is crucial in making our designs come to life. As a licensed interior designer, my role involves assisting in creating comprehensive drawing packages for various projects, versed in both metric & imperial units. These packages include documentation for permits, tender submissions, and construction sets. My projects span a wide range, from private residential spaces and townhouses to condominiums, sales offices, and commercial offices. Whether it’s new construction or renovating existing spaces, my focus is on meticulously executing drawing sets & FF&E specification schedules to minimize errors and requests for information (RFIs) during the construction phase. Once a design receives client approval, I play a key role in developing a working drawing set. This set encompasses plans and elevations. As the drawing package transitions to a Construction Set, I analyze the plans and elevations in crafting millwork and construction details to effectively convey the design intent. As part of my role, I provide technical support for both AutoCAD and Microsoft Excel. Specifically for AutoCAD, I leverage the Sheet Set Manager to manage drawing sets. I create parametric CAD blocks for drawing templates, blocks with annotative scale for drawing symbols, establish data connections using fields, and generate tables for drawing legends. In my work with Microsoft Excel, I utilize formulas such as VLOOKUP and XLOOKUP to create FF&E (Furniture, Fixtures, and Equipment) specification schedules. I maintain an up-to-date supplier list by linking it to the FF&E specification for accurate sales representative information. Additionally, I leverage Pivot Tables to manipulate data, allowing me to generate FF&E specifications organized by room or material. These specifications can include pricing and square footage calculations for procurement and quantity take-offs. This is a game-changer for managing specification schedules. I assist designers in customizing drawing setups for each project, recognizing that a one-size-fits-all approach falls short. My dedication to workflow efficiency enables the designers to focus more on creativity and less on troubleshooting CAD drawings and specifications.

I’m a registered architect in Brazil (CAU/BR) with nine years of experience in architecture and interior design, plus a postgraduate specialization in BIM. I take residential and commercial interior p... Read more

I’m a registered architect in Brazil (CAU/BR) with nine years of experience in architecture and interior design, plus a postgraduate specialization in BIM. I take residential and commercial interior projects from concept through construction documents in Revit and AutoCAD: floor plans, elevations, reflected ceiling plans, finish layouts, and custom millwork details. I also create photorealistic interior and exterior renderings with Enscape, Lumion, D5, and Twinmotion. I’m detail-oriented, reliable with deadlines, and comfortable working independently with U.S. clients in English.

CURRICULUM VITAE ANEESH KARTHIK R... Read more

CURRICULUM VITAE ANEESH KARTHIK R HEBBAR CAREER OBJECTIVE: • Seeking a position to contribute my skills and abilities in the Industry that offers professional growth while being resourceful, innovative and flexible. EXPERIENCE: • Overall 10 month working as a trainee in Vision tools and design, Bengaluru. • Overall 1 year 1 month of working in Smitha Enterprises, Harihar. • Overall 7 month of work experience in GMSEL, Sangur, Haveri • Overall 6 month of work experience in Able design engineering services • Presently working in Gupta electrical industry PROFESSIONAL SKILLS: • CREO • SOLID WORKS (Sheet meatal, Part Design, Assembly and Detailing) • AUTOCAD 2D Drawings CAPABILITY: • Modelling, part drawing, sheet metal, Detailing and part assemblies using Solid works ST4. • Knowledge of GD&T, welding and Basics of jigs and fixture. • Knowledge of SLD, P&ID diagram & layout diagram in AutoCAD 2D. PREVIOUS ORGANIZATION: Vision tools and design Company profile: VISION TOOLS AND DESIGN is a Small Scale industry specializes in IT enabled services like industrial designing, product design, tool design and manufacturing solutions and Reverse engineering. Designation: Designer and quality inspection. Joining: from 3-9-2015 to 7-7-2016 Job Profile • 3D modelling, sheet metal • Part Assemblies • 3D Finishing of models. • 2D detailing for the purpose of manufacturing. • Quality Checking of model weather is it acceptable or not… Project Details Project: DESIGN OF PART MODELS USING FOR CNC MACHINES USING SOLID WORKS Client: NAGEL SPL MACHINES PRIVATE LIMITED Role: 3D finish, 2D detailing, & Sheet metal drawing using solid works. Smitha Enterprises Company profile: Smitha Enterprises is a small scale industry, specializes industrial designing, product design, tool design and sheet metal Designation: Designer and quality inspection. Joining: from 01-10-2016 to 30-11-2017 Job Profile • 3D modelling, sheet metal • Part Assemblies • 3D Finishing of models using Solid Works • 2D detailing and fabrication drawing for the purpose of manufacturing. Project Details Project: DESIGN OF SHEET METALS FOR GENERATOR USING SOLID WORKS Client: PAI KANE GROUP Role: development of mounting arrangements of Base Frame and Canopy, Creation of Part drawings, Assembly drawings, Sheet Metal with welding & with respect to its Functionalities and customer standards, 3D finish, Sheet metal, 2D detailing, & Sheet metal and fabrication drawing using solid works. Projects Handled: Yanmar 45-60 Kva Generators, 600-650 -700 kva volvo penta export Generator, 30KVA Denyo Type Generator, GM Sugars And Energy Limited Company profile: GM Sugars and Energy Limited is a sugar production industry, specializes in directional Control of steam, flue gas, air, etc. like DCS and also in AutoCAD I had drawn SLD drawing, P&ID drawing, layout drawing and manufacturing of sugars. Designation: AutoCAD draughtsman and maintenance Joining: from 25th December 2017 to 24th July 2018 Job Profile • SLD Drawing in AutoCAD 2D • P & ID Drawing in AutoCAD 2D • Layout drawing in AutoCAD 2D • 2D detailing for the purpose of construction. Project Details Project: LAYOUT OF NEW SUGAR PLANT IN TUMMINKATTI Client: GMSEL PLAN TO BUILD NEW ANOTHER SUGAR PLANT IN TUMMINKATTI Role: AutoCAD draughtsman. Able Design Engineering Services Pvt Ltd Company profile: Able Design is a Design Service Company, specializes in Bus Body Structure design, product design, and Layout Designs. Designation: Designer in Solid works and AutoCAD Joining: from 01-6-2018 till now Job Profile • 3D modelling Parts for Bus body Structures. • Part Assemblies • 3D Finishing of models using Solid Works • 2D detailing and fabrication drawing for the purpose of manufacturing. • 3D Structural Drawings Using Solid Works • LH, RH, Front, Rear, Roof and Floor Structures for new bus Body Construction Using Solid Works • Seat Layouts Using AutoCAD 2D. Project Details Project: DESIGN OF STRUCTURES FOR BUS BODY CONSTRUCTION Client: ASHOK LEYLAND, TATA, RAVI BUS BODY BUILDERS AND KMS. Role: Creation of Parts, assemblies and Detailing Using Solid Works. 3D Finishing, Drafting and Welding Symbols as per Customer Requirements. 2D Seat Layouts Using AutoCAD 2D. Projects Handled: Sleeper Buses, Luxury Buses, School Vans, mini Buses, Midi Buses, Ac Buses. CURRENT ORGANIZATION: GUPTA ELECTRICAL INDUSTRY Company profile: GUPTA ELECTRICAL INDUSTRY is a Laundry machinery manufacturing industry specializes in washing machine, washer extractor, tumble drier, flat bed press, vacuum ironing table, laundry lockers, and Laundry layout Designs. Designation: Designer in Solid works and AutoCAD Joining: from 28-1-2019 till now Job Profile • 3D part modelling, sheet metal • Part Assemblies • 3D Finishing of models. • 2D detailing for the purpose of manufacturing. • Reverse engineering of individual parts Project Details. Project 1: DESIGN OF LAUNDRY LOCKERS Client: LAUNDROKART, BANGALORE. Role: Creation of Parts in sheet metal, assemblies and Detailing Using Solid Works. 3D Finishing, Drafting and Welding Symbols as per Customer Requirements. Project 2: DESIGN OF 200KG WASHING MACHINE Client: KLE VISHWANATH KATTI INSTITUTE OF DENTAL SCIENCES, BELGAUM. Role: Creation of Parts in modeling and in sheet metal, assemblies and Detailing Using Solid Works. 3D Finishing, Drafting and Welding Symbols as per Customer Requirements. Project 3: DESIGN OF 50 TUMBLE DRIER Client: KLE VISHWANATH KATTI INSTITUTE OF DENTAL SCIENCES, BELGAUM. Role: Creation of Parts in modeling and in sheet metal, assemblies and Detailing Using Solid Works. 3D Finishing, Drafting and Welding Symbols as per Customer Requirements. ACADEMIC PROFILE INSTITUTION QUALIFICATION S.T.J Institute of Technology Ranebennur (Visvesvaraya Technolgical University, Belgaum) M.TECH IN MACHINE DESIGN (64%) (completed in July 2017) G.M. Institute of Technology Davanagere. (Visvesvaraya Technolgical University, Belgaum) Bachelor of Mechanical Engineering (59.19%) Completed in June 2013) SJVP PU College, PB road Harihar-577601 2nd PUC (55%) MRB High School Harihar-577601 S.S.L.C (74.00%) PERSONAL DETAILS • Mothers Name : Nayana Rajaram • Father's Name : DR. Rajaram K R • Date of Birth : 11th MAR 1992 • Sex : Male • Nationality : Indian • Languages Known : English, Hindi , Kannada • Address : ANEESH KARTHIK RAJARAM HEBBAR S/O DR. Rajaram K R Rajaram Clinic Shimoga Road, Harihar Harihar (T) -577601 Davangere (D) DECLARATION I hereby declare that the above furnished information is true to the best of my knowledge. Place : Harihar (ANEESH KARTHIK R H)

I am a licensed Mechanical Engineer and Senior Piping Design Engineer with over 18 years of experience in the oil and gas, petrochemical, mining, and industrial sectors. I specialize in piping design,... Read more

I am a licensed Mechanical Engineer and Senior Piping Design Engineer with over 18 years of experience in the oil and gas, petrochemical, mining, and industrial sectors. I specialize in piping design, 2D drafting, piping layouts, isometric drawings, piping supports, general arrangement drawings, and material take-offs (MTOs). I am proficient in AutoCAD and experienced in interpreting P&IDs, engineering specifications, and technical drawings. I have worked on engineering and construction projects, coordinating with multidisciplinary teams to deliver accurate, practical, and cost-effective design solutions that meet project requirements and applicable industry standards. I can develop 3D models and designs for mechanical equipment, piping systems, structural and equipment layouts, and external mechanical installations. I also prepare accurate 2D drawings, piping isometrics, general arrangement (GA) drawings, piping support details, and material take-offs (MTOs) based on project specifications and engineering requirements. My services include: -2D and 3D mechanical design and drafting -3D modeling of mechanical equipment and components -Piping layouts and isometric drawings -Industrial piping systems and external piping installations -General arrangement (GA) drawings and equipment layouts -Piping supports and mechanical detailing -P&ID interpretation and drawing updates -Material take-offs (MTOs) and bills of quantities (BOQs) -As-built drawings and engineering drawing revisions -Engineering design support for oil and gas, mining, and industrial projects I am committed to delivering high-quality work, meeting deadlines, and maintaining clear communication with clients. Whether you need assistance with a small drafting task or a larger engineering project, I am ready to help turn your requirements into accurate, professional engineering drawings.

· 15+ years of drafting experience in Land Surveying, Engineering, Architectural, and Structural. · List of Programs I am proficient in and have 5 to 10 years working with · AutoCAD LT · AutoCAD Ci... Read more

· 15+ years of drafting experience in Land Surveying, Engineering, Architectural, and Structural. · List of Programs I am proficient in and have 5 to 10 years working with · AutoCAD LT · AutoCAD Civil 3D · Autodesk · Revit · AutoCAD Architect · AutoCAD · List of Programs I have 1 to 2 years working with · AutoCAD Advanced Steel and Advanced Concrete · AutoCAD Map, Electrical, MEP, Plant 3D, P&ID · Tekla Software · I personally own and have all the above listed programs in version 2016 and Tekla 20.1 · LiDAR software used and have 3 to 5 years’ experience with · MARS a Merrick Company Post-Processing LiDAR data set software · Inertial Explore used to combine kinematic, static and IMU data of LiDAR data collection · Global Mapper · ArcGIS · Other software’s that where periptery software of a company called Digital World out of Canada · Setup jobs in AutoCAD, created point layouts, checked CAD drawings, and verified coordinate systems. Created construction base maps, in field maps for concrete, rebar, framing, steel, utilities, trenching, slab and forming measurements. Downloaded in field data collection and produced as-built, topo, and section maps. Checked and ensured details and construction sheets are free of errors and if any discrepancies are found to produce RFI’s. Excel takeoffs of materials(concrete, rebar, framing, roofing, forms, walls, steel, infill, doors, windows, trim, crown, molding, sheathing, tie downs, and any other materials needed) in a formatted manner to be sent for bids and tracked when delivered, pricing, and stored for future use in bidding. Microsoft word for contracts, RFI’s, proposals, professional letter for various circumstances. Website and database development for online store inventories and tracking along with credit card and payment processing gateways. Sage Construction Management Software for data entry of daily reports, equipment use, visitors, subcontractors, RFI’s, RFP’s, proposals, procurement log, schedule, orders, and any other tracking required on construction job. Development of personal software with C# to improve time required to complete office tasks. · Online GOTO meetings with client, architect, subcontractors, and other various professions. · Very organized and great attention to keeping records and other important files in an easy to maintain and use system depending on the current system or a revamp if desired. · Additional Computer Skills unrelated to Surveying and Drafting · Microsoft Excel, Word, Power Point, and Access · 1-2 years of web design experience in CSS, HTML, Java Script, PHP, and MySQL database · 1 year of software development(self-taught) in C#

Curriculum Vitae K.G. LEELANANDA JAYASURIYA 18, Galbindina Ela, Mirissala, N.W.P, Sri lanka Phone : 037 4737234 ; 077 2236621 National ID Number : 520344616 v D.O.B: 1952.02.03 E-mail: ▒▒▒... Read more

Curriculum Vitae K.G. LEELANANDA JAYASURIYA 18, Galbindina Ela, Mirissala, N.W.P, Sri lanka Phone : 037 4737234 ; 077 2236621 National ID Number : 520344616 v D.O.B: 1952.02.03 E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Drv Licence : B1449091 Passport #: N 3536267 Website: http://www.ljindustries.com Objectives : To offer service to the employer, to best of my abilities and experience . Education Master of Science in Technology Development—Canterbury University of UK 2002 Bachelor of Science in civil engineering –University of Sri Lanka in 1980 Membership of professional Institutions • Member of Institution of Incorporated Engineers, Sri Lanka – MIIE (SL), I.Eng.M1626 • Life member of International Cost Estimating & Analysis Association (ICEAA) • Member of Engineering council Sri Lanka Other Qualifications : Graduate ship of City & Guilds COMPUTER LITERACY High level competency MS Excel, MS Words, AutoCAD (specialized in 3D Modeling & simulations), MS Projects, 3D studio max, Matlab Present Employment : I am managing business LJ Industries for Product Ideation, Design & development. Providing services to construction companies for preparing invoices, estimates, tender biding, technical documentation and supervision of work to contracting companies engaged in engineering contacts Civil & MEP since 2011 to 2022 Summary of Experience 10 years of experience as Construction Manager, Estimator and quantity Surveyor at LJ industries for providing consultancy service to construction companies and other establishments More than 30 years experience in construction work at disciplines including Civil Engineer, Project Manager and Quantity Surveyor, - out of which 10 years in Gulf countries. My experience covers- All aspects of pre contract and post contract activities in Civil engineering projects including Multi storied buildings, On Shore Engineering Preparing Tender & Contract documents, Drafting specifications for B.O.Q. Items, Abstracting quantities from drawings and soft copies, Preparing specifications & Bills of Quantities, Estimating, analyzing rates, Project management, Project Coordination with clients, consultants, contractors and any other parties in construction work, Taking site measurements, Preparing monthly bills, subcontractor payments, variations, Documentation, Planning & programming work. Setting- out works, Supervision and Quality assurance of construction work, Tender evaluation Work Experience in details: Present Employment : • 2011 January to 2023 October Employed as Contract Manager I am managing the business LJ Industries for providing services to construction companies for technical documentation, Tendering and construction related estimating, preparing invoices for work for contracting companies engaged in civil engineering contacts Steel fabrication and MEP works • 2009 January to 2010 December Employed as a Senior Quantity Surveyor for Naas Construction Company in Bahrain for the developing the Projects: Arad Bay water front : Land fill area with landscaping with recreational facilities roads, bridges, parking, amenities, lighting and other related services. King Hamad General Hospital, Muharraq • 2007 January to 2008 December: Employed as the Leading Quantity Surveyor for International Electro Mechanical Services in Dubai Emirates, for the construction of 64 Storied Burj Dubai Lake Hotel • 2000 July to 2006 December: Employed as a Quantity surveyor at Al Reharb Contracting Company - Doha, for various projects in pre-contract and post-contract activities. Duties involved: Preparing tender documents, quantifying, tender evaluation, payment certificates, etc Projects; Dubai Sports city Stadium • 1996 September to 2000 January: in Steeltec (pvt) Ltd, in Sri Lanka as a Site Engineer Duties involved : Prizing, submitting quotations to tenders, designing and estimating, Scheduling and detailing building works used company products, programming and Monitoring the progress of works. Preparing bills of quantities. • 1995 May to 1996 August : in Lanka Trading & Contracting Co., Sri Lanka as a Quantity Surveyor Duties involved: Prizing, submitting quotations to tenders, design and Estimating, Preparing monthly bills, taking site measurements • 1993 January to 1994 August: Employed as a Civil Engineer in Al Hajji Contacting & Trading w.l.l..in Doha, Qatar. Duties involved in: Supervision of construction project such as villas, shopping Complexes, Setting out of works, valuations, preparing subcontractor quantities for payments, scheduling and detailing works, Programming of works. • 1992 to 1886 & 1980 to 1984 : Employed as a Construction Superintendent in State Engineering Corporation for construction of housing projects including multistoried buildings & cluster buildings, Playgrounds & indoor stadiums, Water treatment plants , Storage tank & supply pipe

Consulting Snr Engineering CAD Designer Drafter, Design Draughtsman, I am seeking work internationally or within African continent. I am a south African I will need sponsorship visa to work abroad.... Read more

Consulting Snr Engineering CAD Designer Drafter, Design Draughtsman, I am seeking work internationally or within African continent. I am a south African I will need sponsorship visa to work abroad. 20yrs in industry Design, Modelling Shop Detail Research & Design Projects , Prototypes , Tender designs , Reverse Engineering, Back Draft old designs , onsite work hands on. industries: Defence Armored Panzer, Mining ,Structural ,sheetmetal, Civil , architectural, as_built designs, piping isometrics hi - low pressure api, upvc, pvc / hdpe /ms/ss/ asme ,astm, iso, din, bs, plumbing heating water static-portable 20ft - 40ft , mine , filtration , industrial plant layouts equipment , telecom, container tankers, trailers ,sheet metal ,agri ,fmcg, conveyor systems , plant layouts, pid ,pfd , electronics wiring/ hookup/ loop/ wire harness diagrams 2d/3d Autodesk Autocad ,Inventor, 3d Plant, Advanced Steel, Structural Detailer, Revit, Solidworks, Solid Edge, Rhinoceros,Microstation, Draftsite, Pro Engineer, Smart Plant Foundation piping, structures, equipment,pid Designed details and prepared complete and accurate working plans for complex projects piping, electrical, structural, mechanical•Interfaced with departmental staff to identify equipment and materials requirements •Liaised with professionals and clients to agree on project brief and specifications •Determined layout of charts, strength of materials and complex engineering designs •Revised computer-aided designs and plans to comply with modified specifications •Provided technical guidance, design interpretation and direction to drafting staff •Delivered to tight deadlines and ensured strict compliance with quality standards •Coordinated with contractors and client representatives with regards to design changes •Maintained excellent working relations with all site personnel and subcontractors •Created and produced documents of all processes and procedures for the design •Managed and coordinated junior staff and trainees, providing ongoing support •Developed project briefs and monitored progress until final completion of project •Monitored quality assurance, costs and deadlines throughout construction project my contract finishes off 20 November 2021 with MWSPC in K.S.A. Turiaf. if you don't find candidate for my line of industry/work I am available from 2 months notice from period I accept job, contract offer My rates start at R385 to R485/ $25-$35 per hour Mark John Erasmus Consulting Engineering CAD Designer, Design Draughtsman Independant Contractor ,Sole Proprietor of Rockwell Design Mine Technician

Sherif Mohamed Abd El-Nour Abd El-Magid                          &nbsp... Read more

Sherif Mohamed Abd El-Nour Abd El-Magid                             Piping Designer Sr. Cad Designer  _________________________________________________________________________________  OBJECTIVE: Seeking a Challenging Career in a Petroleum (Oil & Gas) or Construction Company Whereby My Designing and Drafting Background, Previous Work Experience, and Managerial Skills can be Applied.   PERSONAL INFORMATION: Date of Birth:     17-1-1970 Address:             20 Mohamed El-Sayed Hyba from Abu El-Fadel St.,      El-Zawia El-Hamra, Cairo. Egypt. Military Status: Finished Marital Status:  Married Nationality:        Egyptian Religion:             Moslem   EDUCATION: Diploma of Industrial Technicality, Mataria Institute of Industrial Technique Department:             Mechanical Graduation Date:     May 1992 Overall Grade:         Good   LANGUAGE SKILLS: Arabic:  Mother tongue English: Very good command of both written and spoken         PROFESSIONAL SKILLS:   Familiarity with International codes & standards.   18 YEARS EXPERIENCE IN THE FIELD OF MECH. WORKS DESIGN             AND DRAFTING INCLUDES: EQUIPMENT ORIENTATION (following Data Sheets). PIPING ROUTING (following P& ID's) FOR EQUIPMENT SUCH AS PRESSURE VESSELS, TANKS, TOWERS, EXCHANGERS AND PUMPS. SITE LAYOUTS AND PLOT PLANS DRAWINGS. PLANS, SECTIONS & DETAILS DRAWINGS. SHOP DRAWINGS. ISOMETRICS AND BILL OF MATERIALS. MECHANICAL DRAWINGS FOR MACHINE ROOMS. UNDERGROUND DRAINAGE NETWORKS. TREATMENT STATIONS. ANIMATION FOR MORE DETAILS AND REPRESENTATION. ______________________________________________________________________________________   COMPUTER SKILLS:   ·         Very good Knowledge of Computer Hardware. ·         Very good Knowledge of Various Operating Systems (DOS / Windows ) ·         Very good Knowledge of Many Applications Running Under Microsoft Windows (Including Microsoft Office Applications). ·         Very good  Knowledge of PDS system. ·         Very good  Knowledge of PDMS system. ·         Very good  Knowledge of Smartplant Review. ·         Very good  Knowledge of ORTHOGEN. ·         Very good Knowledge of MICROSTATION Program (2D - 3D). ·         Excellent Knowledge of AutoCAD Program (2D - 3D). ·         Very good Knowledge of CADWorx Application. ·         Good Knowledge of AutoPLANT Application. ·         Good Knowledge of PlantSpace Application.   ______________________________________________________________________________________                     WORK EXPERIENCE:   I WORK FORCB&I Lummus L.L.C. Position: Sr. PIPING DESIGNER & LEAD CAD DESIGNER Dec. 2010 – Present Member of Reficar project design group (PDS, ORTHOGEN, MicroStation & AutoCAD). Tasks Accomplished Included: ·         Preparing 3D-Equipment Models (following Data Sheets). ·         Preparing 3D-Piping Models (following P&ID). ·         Preparing Supports in Models for Stress Analyses review. ·         Extract and Check ISO's. ·         Coordinate with Process Dep. To reroute lines according to P&ID updates. ·         Coordinate with Stress Analyses to achieve optimum supporting and routing as possible.   TEAM LEADER Tasks Accomplished Included: ·         Extract 2D by DRAWING MANAGER MODULE. ·         PRODUCE DWG & DGN FORMATS WITH ORTHOGEN. ·         FINISH AND COMPLETE 2D WITH FULL DATA AND DETAILS             by AutoCAD & MicroSTATION.     I WORKED FORCB&I Houston Position: Sr. PIPING DESIGNER July 2010 – Dec. 2010 Member of Reficar project design group (PDS, Microstation & AutoCAD). Tasks Accomplished Included: ·         Preparing 3D-Models by PDS (included P&ID and Data Sheets). ·         Clash Check Reports. ·         Extract ISO's ·         Extract 2D with DWG & DGN formats by ORTHOGEN. ·         FINISH DRAWINGS WITH FULL DATA AND DETAILS.                 I WORKED FORCB&I Lummus L.L.C. Position: Sr. PIPING DESIGNER Aug. 2007 –July 2010 Participated in NAGARJUNA project (PDMS & AutoCAD). Tasks Accomplished Included: Member of NAGARJUNA Project team, Participated in Preparing                                     the Modeling as following: - Check Conditions for lines to update from latest Line List. - Check Clashes for lines to release it from Model. - Coordinate with Stress Analyses to achieve optimum    supporting and routing as possible. - Coordinate with Process Dep. To reroute lines according to      P&ID updates. - Coordinate with Instrumentation Dep. To update Sets and    Hook-Up’s. - Coordinate with Electrical Dep. To arrange locations of    Lighting Devices. - Extract ISO’s for Checking. ______________________________________________________________________________________   I WORKED FORHEAVY ENGINEERING INDUSTRIES AND SHIPBUILDING CO. (K.S.C) Position: PIPING DESIGNER Apr. 2006 – Jun 2007 PARTICIPATE IN SEVERALJOBS FOR K.O.C Tasks Accomplished Included: ·          Preparing Equipment Orientation. ·          Preparing Equipment Piping. ·          Preparing Piping Routing. ·          Preparing Pipelines Networks. ·          Preparing Mechanical Drawings & Details. ·          Plot Plans. ·          Site Layouts. ·          Piping Plans & Sec's. ·          Piping Isometrics & MTO. ·          3D View Perspective. ·          Modeling & ISOgen. ____________________________________________________________________________________       I WORKED FORSIEMENS Industrial Solutions and Services. Position: PIPING DESIGNER Sep. 2004 – Mar. 2006 Participated in EAST DELTA piping treatment project And other Electromechanical Projects Tasks Accomplished Included: ·           Preparing Mech. & Piping Works. ·           Preparing SECTIONS & DETAILS. ·           Preparing ROUTING OF PIPING NETWORKS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ______________________________________________________________________________________   I WORKED FORSAUD CONSULT EL KHOBAR. Position: CAD SUPPORT Mar. 2003 – Feb. 2004 Participated in KHAFJI project forARAMCO Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ·           Repairing and Converting for DGN & DWG files. ·           Trainer ( MicroStation ). ______________________________________________________________________________________   I WORKED FORENPPI Position: PIPING DESIGNER May 2001 – Mar. 2003 Participated in Several Petroleum & Industrial Projects Tasks Accomplished Included: ·           Preparing Equipment Orientation & Piping (Vessels, Towers, Tanks, etc.). ·           Preparing Piping Routing for Networks. ·           Preparing Modeling. ·           Preparing Mechanical Drawings for Pump Stations. ·           Preparing Shop Drawings & Details. ·           Plot Plans. ·           Site Layouts. ·           Piping Plans. ·           Piping Isometrics & MTO. _____________________________________________________________________________________           I WORKED FORABBpetroleum Position: PIPING DESIGNER & Sr. MECH. DRAUGHTSMAN Apr. 2000 – Apr. 2001 Participated in ACPA project Jobs Accomplished Included under & above ground: ·           Preparing Underground Oily Piping Design System. ·           Preparing Details. ·           Preparing Piping General Arrangement of Tanks Farm. ·           Preparing Piping Isometrics & MTO.   ______________________________________________________________________________________     I WORKED FOR ZUHAIR FAYEZ Misr Position: MECH. DRAUGHTSMAN Jan. 98 - Apr. 2000 Participated in many of Electromechanical Projects Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing IRRIGATION SITE LAYOUTS.   ______________________________________________________________________________________     I WORKED FORSAUD CONSULT Misr Position:MECH. DRAUGHTSMAN Jan. 96 - Dec. 97 Participated in many of Electromechanical Projects Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ·           Preparing 3D-DRAWINGS.   ______________________________________________________________________________________                 I WORKED FOR GARNO Misr Position: PIPING, MECH. DRAUGHTSMAN Jan. 95 - Dec. 95 Participated in KHARGA treatment stations Tasks Accomplished Included: ·           Preparing DRAWING PLANS. ·           Preparing SECTIONS & DETAILS. ·           Preparing ISOMETRICS & MTO. ·           Preparing SHOP DRAWINGS. ·           Preparing 3D-DRAWINGS. ______________________________________________________________________   Time Before I Worked For Different Companies As a Beginner Under Training.   ______________________________________________________________________      

THE SERVICE OF COOPERATION IN MAKING THE PROJECTS OF MECHANICAL THERMO-ENERGY SYSTEMS AND INSTALLATIONS AS WELL AS MECHANICAL INSTALLATIONS / PROCESSES / EQUIPMENT AND CONSTRUCTION / MECHANISMS / ASSE... Read more

THE SERVICE OF COOPERATION IN MAKING THE PROJECTS OF MECHANICAL THERMO-ENERGY SYSTEMS AND INSTALLATIONS AS WELL AS MECHANICAL INSTALLATIONS / PROCESSES / EQUIPMENT AND CONSTRUCTION / MECHANISMS / ASSEMBLIES, ..... As an external designer / collaborator / constructor / consultant, we offer collaborative services for the development of technical and project documentation for conventional and industrial systems. I deliver technical and project documentation in the form of project assignment, conceptual / master / execution technical solution in the scope of detailed technical description, detailed technical calculation, detailed design drawings in the form of P & ID scheme diagrams, layout of equipment and installations, section, views, details, individual positions / assemblies / mechanisms / constructions / devices and a set of contract costs for the contracting with the specification of equipment and materials, specification of the necessary montage works with the overall assessment of the value of the investment, as well as projects of derived state for the realized projects and technical solutions. Form of delivered documentation in electronic form as pdf, xls and cad format. The method of cooperation according to the model of the online work as an external designer / collaborator / constructor / consultant of the designing house / office and (or) the investor and in the scope of complete technical design solutions or parts of projects as a part or external collaborative support for the design team and (or) the investor. LIST OF PROJECTED TECHNICAL SYSTEMS AND ELEMENTS: HEATING, COOLING, VENTILATION, ASPIRATION / DEDUSTING, COMPRESSED AIR, GAS (NATURAL / LPG), WATER CITY / SOFTENED / DEMINERALIZED / INDUSTRIAL, STEAM AND CONDENSATE, CANALIZATION, CONSOMABLE WARM WATER, OIL ECONOMY, TANKS FOR LPG, SOLAR, FIRE PROTECTION /SPRINKLER SYSTEMS, BOILER ROOM / POWER PLANT, HEAT CHANGE STATION, CLIMATE CHAMBER, CHILLERS, HEAT PUMPS, COMPRESSOR STATIONS, GAS STATIONS, SPRINKLER STATIONS, WARM WATER PIPELINE, HOT WATER PIPELINE, STEAM LINE, GAS PIPELINE, TECHNOLOGYES AND PROCESSES, DEVICES, STEEL CONSTRUCTIONS, MECHANISMS, ASSEMBLIES, ..... LIST OF PLANNED EQUIPMENT: ALFA LAVAL, ALGAS-SDI, AQUATHERM, ARI ARMATUREN, ARMACELL, AIR TORQUE, BOA GROUP, BOSSARD, BÜRKERT, CALEFFI, CENTROMETAL, CWG, DANFOSS, EBRO ARMATUREN, ELBI, ENDRESS + HAUSER, EUROGAMMA GROUP, FESTO, FLOWSERVE, GEMÜ, GENEBRE, GEORG FISCHER, GESTRA, GHH RAND, GOK, GRUNDFOS, HERZ, HONEYWELL, IKOM, IMI HEIMEIER, ITAP, ITRON, JACOB, KAESER KOMPRESSOREN, KLIMA OPREMA, KOVINA, LIM MONT, LIPOVICA, MAGRA, MESURA, MÜPRO, NEDERMAN, OLIMPIA SPLENDID, ORIOLIK, OVENTROP, PASTOR, PICHLER, PIPE LIFE, PIREKO, POLIX, PROKLIMA, REFLEX, REHAU, REGO, RESOL, RUCK VENTILATOREN, SCHIEDEL, SELTRON, SIEMENS, SPO, SYSTEMAIR, TECONOVA, THERMAL TREND, TROX TECHNIK, VAILLANT, VEAB HEAT TECH AB, VIESSMANN, VIVAX, WEISHAUPT, WIKA, ..... TECHNICAL CALCULATIONS: HEAT PUMPS - Dimensioning, selection and calculation of heat pumps, HEATING - Noise calculation according to VDI 2174, HEATING - chimney according to DIN EN 13384-1, HEATING - Sizing of heating generator, HEATING - selection and dimensioning of radiators according to DIN EN 442, HEATING - Floor heating according to DIN EN 1264, HEATING - calculation of annually required heating energy demand according to DIN EN 832, HEATING - operation and selection of the expansion system according to DIN EN 12828, HEATING - heating losses according to DIN EN 12831, HEATING - heating and cooling – hydraulics, COOLING - Calculation of the cooling load according to VDI 2078, GAS - Dimensioning and Calculation The pressure loss in pipelines, HOT WATER - Heating load for hot water according to DIN 4708 and 1988, SOLAR - Calculation of solar systems, VENTILATION - Calculation of ventilation systems, ..... REFERENCES: MECHANICAL ENGINEERING SHCOOL, FACULTY OF MECHANICAL ENGINEERING AND NAVAL ARCHICTETURE, ENERGETICS AND MECHANICAL INSTALLATIONS IN CIVIL ENGINEERING, METAL INDUSTRY, ASSEMBLY OF MECHANICAL / PROCESS EQUIPMENT AND INSTALLATIONS, FOOD INDUSTRY, CHEMICAL INDUSTRY, PHARMACEUTICAL INDUSTRY, ...

Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1  OBJECTIVE: To obtain a position within a large dynamic company wh... Read more

Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1  OBJECTIVE: To obtain a position within a large dynamic company where there are opportunities for growth and development. CAREER PROFILE: § Excellent interpersonal skills with an ability to work effectively with individuals at all levels. § Soft skills: Strong team work attitude and ability to motivate the team members, significant communication skills, problem solving attitude, fast and multi-task execution capabilities, strong analytical mind set and imaginative problem solving ability. PROFESSIONAL EXPERIENCE: PGESCo, Power Generation Engineering Service Company Consultant BECHTEL Partner Title : Senior Plant Design Engineer • Professional knowledge: clear and solid knowledge of all the plant design, piping engineering related activities & Interaction with Process Licensor including review of P&IDs & Preparation of Piping Design Basis. General Layout (Site Plan) & Piping Design Criteria Equipment Layout Plan (Unit Plot Plan) Piping Assembly Drawings Key Plan , U/G Piping Composite dwg.(s) Piping routing studies & Underground system routing Piping & Instrumentation Diagrams (P&IDs) , Line List Piping Specifications (e.g. supply, material, dimensional, fabrication, erection / installation, welding incl. equipment welding, testing, PMI, insulation) List of piping special components & Material take off (Bill of Material) Technical Bid Evaluation & vendor documentation for piping material 3D- Model , Piping isometric design and issue procedure Piping isometric list , drawing Pipe support specification ,summary & check . • Piping Material and Valve Material Specifications • 3-D Modeling and layout design. • Ensuring compliance with Procedures, Work-instructions and Check-lists • Arranging 3-D Model and checking dwg. And Isos • Equipment design (Tanks ,heat exchangers, Pumps, Compressors ………etc ) • Drafting composite drawings and extracting Isometrics. • Responsible Engineer for the Plant layout , Plant General Arrangement & Equipment Locations ) • Check and review Project /vendor, Contractors drawings. • Issue of Design Change Requests/Notes and Man-hour Change Orders • Site interface and support/co-ordination • Standardization (e.g. Updating of Specifications, Technical Notes) • Responsible Engineer of (waste/water treatment & desalination water) packages. • Coordination with other disciplines (Electrical, Civil, Archtiecture, Control,etc) • Coordination with Site Construction Managers/Other Responsible Engineers. Since May 2008 to Nov.2012 • Project shared in : EL-TEBBIN Power plant 2*350MW ,ABOU-QIR Power plant 2*650 MW,EL-SOKHNA “Super Critical” Power Plant 2*650 MW , El-Suez power plant 650 MW ARAB CONTRACTORS CAMEROON LTD YAOUNDI –OLAMA (ROAD CONS. PROJECT), CAMEROON Since 2007 to 2008 §Site & Tech.office Manager of (Asphalt Mixing /Concrete) Plants and Asphalt equipment &Spray bitumen tanks trucks, compactors, .etc). (Cameroon-Yaoundé 2008) §Controller and Tech.operator for all kinds of asphalt /Concrete plants ARAB CONTRACTORS “OSMAN AHMED OSMAN” Transportation projects sector (Roads and railway projects), Cairo Since 2003 to 2007 §Maintenance, Repair and Designer engineer for all No. of eleven ASPHALT MIXING PLANT. (Cairo 2003) §Manager of asphalt pavement sector. (2004) §Manager for all No. of elevens ASPHALT MIXING PLANT. (2005-2007) §Visitor lecturer in (MTI-MANAGEMENT &TECHNOLOGY INSTITUTE) (2005-2007) Sugar Industrial Integrated Co., Hawamdeya, Cairo 2002-2003 Associate Industrial and designer engineer §Learning a full description of the sugar industry techniques. § Completed studies and validations on all stations in the factory started at milling and ended at packing stations and the control stations. § Completed studies and validations on all equipment used on the production floor. § Completed studies on the processes and instrumentations diagram (P&ID) of the factory. § Dealing with the factory’s software packages which used in the design and the analysis of the piping, structure and equipment. §Learning the creation of change requests required to amend standard operating procedures. § Conducted trouble-shooting investigations prior to the start up of new production lines. §3-D Modeling and stress analysis calc. § Provided general support to the B.Sc. Project. Army Factory 909 of Engines, Helwan, Cairo Training & work 2000-2002 Engineering Assistant (Summer Placement) § Assisted with the creation of Auto-CAD drawings. § Completed evaluation forms on CNC machines as detailed by the Senior Engineers § Filed and typed up engineering data. § Devised layout drawings on Auto-CAD for the review of the Senior Engineer. § Completed studies and validations on all equipment used on the production floor. § Provided Engineering support for each production area. § Provided general support to the department. EDUCATION: Cairo University, Cairo, Egypt July 2003. BSc. in Machine design and production. Excellent degree in B.Sc. project. Headway University, California, USA, April 2012 MSc.in Mechanical Science Engineering ASME Professional member SPED Professional member PROJECT HISTORY: Project name is “Computer aided design for an industrial piping network “. The goal of my project to give a complete modeling of an evaporation station used in sugar industry techniques and to perform stress analysis on the main pipelines feeding the evaporators. From the main objectives of the project is studying the various types and features of pipe fittings and its accessories including materials, codes, design conditions, design rating and pressure &temperatures rating. Software packages used in project: • AUTOPLANT packages (STEEL_STRUCTURAL, EQUIPMENT, and PIPING). • AUTOPLANT (P&ID) PACKAGE • AUTOPIPE PLUS (stress analysis) package. • COSMOS/M package(finite element analysis) • AUTOCAD 2000 package. ADDITIONAL INFORMATION & Skills: Proficient in the use of: • Autodesk Autocad (2D-3D)2000-2002-2004 • Bentley AutoPlant 3D (STEEL_STRUCTURAL, EQUIPMENT, PIPING). • AUTOPLANT (P&ID), Material Database. • AUTOPIPE PLUS(stress analysis) • COSMOS/M package(finite element analysis) • Smart Plant 3D “Intergraph Package” • Smart Sketch 3D “Intergraph Package” • Inventor 8 ,11 • Microstation/J • 3DM “BECHTEL confidencial programe package” • Pipeflow programe package • Mechanical desktop • 3DMAX CAD 09 • Intelligent CAD 2001 • Visual basic • Microsoft Word, Excel, PowerPoint, Photoshop • Courses completed through study include Thermodynamics, Machine Design, Heat Transfer, quality control, management, CNC programming, Plant engineering, metal forming…..etc. • Familiar & Courses attended (ASME B31.1,B31.3 …etc) and ANSI ,NFPA ,API ,AWWA,OSHA,Valves Selection…………etc codes ,Specifications and standards • Many Seminars/Conferences were be attended in/out work field • Good knowledge in Electric /Control. • Languages: Fluency in spoken & written English. PERSONAL DETAILS: Date of birthday: 12 February 1980 Religion: Muslim Marital status : Married and have a Son. Military service: done Drive license: Valid INTERESTS: Football, Reading, Travel, Internet.

I have 6 years civil and structural CAD experience. I am a project engineer for a civil engineering company and have managed my own small design projects. I am highly skilled in Civil 3D, AutoCAD and... Read more

I have 6 years civil and structural CAD experience. I am a project engineer for a civil engineering company and have managed my own small design projects. I am highly skilled in Civil 3D, AutoCAD and Revit.

Industrial Designer with 14 years of experience delivering innovative transportation and product design solutions across North and South America, with a proven track record of bringing over 30 product... Read more

Industrial Designer with 14 years of experience delivering innovative transportation and product design solutions across North and South America, with a proven track record of bringing over 30 products from concept through fabrication. Trilingual professional fluent in English, advanced in French, and native in Portuguese, supported by formal education in Transportation Design, Industrial Drafting (CAD), and Information Technology (Systems Analysis). Inventor on a range of patented products and recognized Industrial Design mentor to internationally awarded students, ranked among the top 250 CAD professionals globally on CadCrowd. Expert in SolidWorks, AutoCAD, KeyShot Pro, and a broad range of design, prototyping, and visualization tools. Certified Industrial Designer (Québec Government) and experienced project leader, skilled in managing multidisciplinary projects from concept through production. Committed to delivering functional, aesthetic, and client-focused design solutions.

Namaste, iam Ashish, a passionate design engineer in aeronautical and architectural engineering. I have worked as a R&D engineer at an aerospace plant - TAAL in Hosur as an intern and employee. I was... Read more

Namaste, iam Ashish, a passionate design engineer in aeronautical and architectural engineering. I have worked as a R&D engineer at an aerospace plant - TAAL in Hosur as an intern and employee. I was responsible for ISRO, HAL, NAL projects - sheet metal, part design, assembly, rocket cones etc. After some time i worked for Mohtisham property developers at Mangalore responsible for interior design, exterior design etc.

Hi welcome! Thanks for landing to my Profile. I completed my B.Sc in Civil Engineering from World University Bangladesh. Now, I am a professional AutoCAD engineer with 10+ years of experience in draf... Read more

Hi welcome! Thanks for landing to my Profile. I completed my B.Sc in Civil Engineering from World University Bangladesh. Now, I am a professional AutoCAD engineer with 10+ years of experience in drafting and detailing such as architectural drawings, structural details, electrical drawings, plumbing drawings, any cad drawing conversion and infrastructure drawings (roads, jetties, yards, bridges). I Will Draw Any Architectural 2d Floor Plans, House Plans, Elevation, Section Cad Drawings And To Convert Any Manual Drawings, Pdfs, Hand-Drawn Sketches Blueprints To Draw On a Scale To Dwg File. My services include: 2D Floor plans AutoCAD drawings Any type of drafting work Elevation and section drawings Construction drawings Structural Detaling Redraw floor plans. CAD Conversions Pdf, jpg, image, blueprint sketch to dwg Preparing Earthwork Layout Plan, Road Marking & sign Board Layout Plan & Details, Longitudinal Profile, Earthwork Cross Section Section including all Utilities & All Structures for approval & Working My services are not limited to as mentioned. Why me??? 100% Best service and guaranteed quality work. INFINITE Revisions until your complete satisfaction. Daily update and quick turnaround. On-time delivery Feel free to contact me ! To obtain a responsible position as an AutoCAD Operator where my creative skills in the field can contribute to the growth of the organization. Highly motivated, experienced, and passionate candidate seeks to further a career in a position that can utilize my technical skills and management knowledge to benefit mutual growth and success. Thanks

I am a Computer Engineering Student and enjoy making cad models. for both cospely, props or just for fun.

I am a Computer Engineering Student and enjoy making cad models. for both cospely, props or just for fun.

Architect and Interior Designer with over 12 years of professional experience Specialized in residential, commercial, and hospitality projects Strong skills in 3D visualization and architectural dra... Read more

Architect and Interior Designer with over 12 years of professional experience Specialized in residential, commercial, and hospitality projects Strong skills in 3D visualization and architectural drawings Expert in 3Ds Max, V-Ray, D5 Render, AutoCAD, and Photoshop Proven ability to create photorealistic renders and walkthrough animations Focused on combining aesthetics with practical design solutions Track record of delivering high-quality, client-focused designs Passionate about transforming ideas into visual and functional realities

I use SolidWorks, Ansys, and Blender. Skills: CAD design Heat transfer and fluid flow analysis (CFD) Structural Analysis (FEA) Reporting Rendering Animation for marketing

I use SolidWorks, Ansys, and Blender. Skills: CAD design Heat transfer and fluid flow analysis (CFD) Structural Analysis (FEA) Reporting Rendering Animation for marketing

I am a Mechanical/Aerospace Design Engineer specialising in CAD modelling, CFD simulation, FEA analysis, and UAV propulsion systems. I design, analyse, and optimise mechanical and aerodynamic componen... Read more

I am a Mechanical/Aerospace Design Engineer specialising in CAD modelling, CFD simulation, FEA analysis, and UAV propulsion systems. I design, analyse, and optimise mechanical and aerodynamic components using industry‑standard tools such as Creo, SolidWorks, ANSYS Fluent, and ANSYS Mechanical. My core expertise includes: 1)3D CAD modelling & mechanical design 2)CFD simulations (ducted propellers, internal flow, external aerodynamics) 3)FEA structural & thermal analysis 4)UAV propulsion system design 5)Parametric modelling & optimisation I deliver complete engineering solutions including geometry creation, mesh generation, simulation setup, post‑processing, and detailed technical reports. If you need high‑quality CAD models, aerodynamic analysis, or mechanical simulations, I can support your project from concept to validated results.

Innovative Senior Architect with over 20 years of experience in architectural design and technical coordination. Currently specialized in AI-driven furniture design, leveraging advanced Generative AI... Read more

Innovative Senior Architect with over 20 years of experience in architectural design and technical coordination. Currently specialized in AI-driven furniture design, leveraging advanced Generative AI to create high-end furniture concepts and interior visualizations. Expert in translating complex conceptual ideas into high-fidelity visual assets.

Degreed mechanical engineer. Machine Design Services AutoCAD 2016 and SolidWorks 2016 see web page www.clweng.com

Degreed mechanical engineer. Machine Design Services AutoCAD 2016 and SolidWorks 2016 see web page www.clweng.com

I have greate experience in 3ds max vray and 3D designing either modelling or texturing also rendering high quality realistic rendus . I have 7 years of eperience in architectural cabinets

I have greate experience in 3ds max vray and 3D designing either modelling or texturing also rendering high quality realistic rendus . I have 7 years of eperience in architectural cabinets

13 Years of total experience as a mechanical design engineer. Expertise in Siemen's NX, solidworks, Autocad and Ansys.

13 Years of total experience as a mechanical design engineer. Expertise in Siemen's NX, solidworks, Autocad and Ansys.

Hi, I am a Certified SolidWorks Associate in Mechanical Design and a and a Lean Six Sigma professional with Mechanical/ Industrial Engineering degree and over two years of experience in Mechanical par... Read more

Hi, I am a Certified SolidWorks Associate in Mechanical Design and a and a Lean Six Sigma professional with Mechanical/ Industrial Engineering degree and over two years of experience in Mechanical part Design, Steel and Aluminum design and manufacturing. Engineering Design, Manufacturing, CFD, FEM and CNC programming, 3D printing and Design for manufacturability is my expertise. Excellent communication and utmost availability.