Hire the best freelance HVAC and Plumbing expert designers for your company

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentrati... Read more

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentration in Mechanical Systems at California Baptist University. Outside of school, I am heavily involved in the collegiate design competition Formula SAE where I lead a team of six engineering students in designing, fabricating, and validating the chassis and ergonomic systems of Cal Baptist Racings' sixth competing internal combustion racecar. In the past, I have worked in a variety of roles in multiple fields, including electrical, warehouse, and student life, where I have gained experience in teamwork and the execution of engineering solutions. My plan for the future is to continue gaining engineering experience through Formula SAE, summer internships, and scholastic projects.

Summary: With 9.5 years of experience, I specialize in Mechanical Engineering, Fire Protection, HVAC, and Project Management. My expertise spans across MEP system design, utility system design, fire d... Read more

Summary: With 9.5 years of experience, I specialize in Mechanical Engineering, Fire Protection, HVAC, and Project Management. My expertise spans across MEP system design, utility system design, fire detection and protection systems, and seismic load calculations. I hold certifications in Autodesk AutoCAD, Lean Six Sigma, and various fire safety systems. Memberships and Affiliations: NFPA: Technical Committee Member (Principal, Special Occupancies) Society of Fire Protection Engineers (SFPE) American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) The American Society of Mechanical Engineers (ASME) Institution of Mechanical Engineers The Institution of Engineers Bangladesh (IEB) International Association of Engineers (IAENG) Society of Petroleum Engineers (SPE) Employment History: Fire Protection Specialist at ADC: Commissioned new airport fire systems. Project Manager at HeptaTech Limited: Led MEP design for LEED projects. Design Manager at China Construction Third Engineering Bureau Co Ltd: Oversaw HSIA Expansion Project design. Engineer at Bangla Trac Limited: Designed fire detection systems and managed project planning. Engineer at Prokausholee Designers and Researchers: Specialized in fire safety and HVAC system design. Academic Qualification: Professional Masters in Applied Statistics and Data Science, Jahangirnagar University M.Sc. in Engineering (Mechanical Engineering), Bangladesh University of Engineering and Technology Bachelor of Science (B.Sc.) in Mechanical Engineering, Ahsanullah University of Science and Technology Publication: Published a paper on "Prototype Smart Home Environment with Biofeedback" in IEEE TENSYMP 2020. Professional Certifications: Autodesk Certified Professional: AutoCAD® (ACP) Lean Six Sigma Black Belt (LSSBB) Fire System (Fire Detection and Alarm) Certification ISO 9001:2015 Google Digital Marketing Certification Training Summary: Received extensive training in areas such as industrial automation, boiler plant energy management, fire safety, HVAC system design, and leadership skills. Specialization: Proficient in mechanical detailing, NFPA codes, fire detection and protection, HVAC systems, Six Sigma methodologies, design engineering, energy simulation, and project management. Completed notable projects including foam water suppression system design, MEP system designs for various commercial buildings, and data center design using FM-200. Additional Information: Completed over 250 projects, demonstrating a track record of excellence and reliability in delivering engineering solutions. For further details or inquiries, please feel free to contact me.

I am good in design 3D also 2D in mechanical engineer, i was experienced at this field about 7 years, using autodesk inventor, Autocad and solidworks software

I am good in design 3D also 2D in mechanical engineer, i was experienced at this field about 7 years, using autodesk inventor, Autocad and solidworks software

I am a Professional Electrical Design Engineer with 4+ years of expertise in Electrical Panel Design, layout, and project execution. I hold a Bachelor's degree in Electrical Engineering and possess st... Read more

I am a Professional Electrical Design Engineer with 4+ years of expertise in Electrical Panel Design, layout, and project execution. I hold a Bachelor's degree in Electrical Engineering and possess strong technical skills in AutoCAD Electrical and EPLAN, ZW CAD with proven experience in developing accurate electrical schematics, panel layouts, and detailed design documentation. Additionally, I have completed a course in Revit MEP, where I gained practical knowledge through project work, enhancing my BIM modeling capabilities for MEP systems. With a solid background in electrical panel design, procurement, and project handling, I bring a strong combination of technical knowledge, software proficiency, and hands-on industry experience to deliver efficient, reliable, and client-focused engineering solutions.

I’m a MEP Design Engineer with 8+ years of experience specializing in HVAC, plumbing, and firefighting systems for residential, commercial, and industrial projects. I deliver efficient, code‑compliant... Read more

I’m a MEP Design Engineer with 8+ years of experience specializing in HVAC, plumbing, and firefighting systems for residential, commercial, and industrial projects. I deliver efficient, code‑compliant designs from concept to construction, including HVAC load calculations, ductwork layouts, plumbing schematics, and fire protection systems. Alongside engineering, I’m an AutoCAD Drafting Specialist skilled in 2D/3D architectural drawings, site plans, and permit‑ready documentation. Using tools like AutoCAD, HAP, & Elite. I provide precise, coordinated, and construction‑ready outputs that ensure accuracy, speed, and reliability for clients worldwide.

Hello, Customers, With our team's extensive experience and skills, we will successfully complete your project. Our team consists of professional engineers licensed in several states of U.S. We hav... Read more

Hello, Customers, With our team's extensive experience and skills, we will successfully complete your project. Our team consists of professional engineers licensed in several states of U.S. We have already completed many projects for many clients and have received great reviews from them. Our services cover all areas of civil engineering, architecture and structures and we have earned the trust of our clients by providing high-quality results within a short period of time. We will do our best to ensure that those who use this platform will not regret working with our team and will eagerly look forward to working with us. Best Regards,

Ingénieur MEP & Modeleur BIM spécialisé en Revit MEP (CVC, Plomberie, Électricité) avec plus de 4 ans d’expérience. Je maîtrise la modélisation 3D MEP et la production de maquettes numériques fiables,... Read more

Ingénieur MEP & Modeleur BIM spécialisé en Revit MEP (CVC, Plomberie, Électricité) avec plus de 4 ans d’expérience. Je maîtrise la modélisation 3D MEP et la production de maquettes numériques fiables, conformes aux standards BIM. Compétences clés : ✅ Modélisation 3D MEP (HVAC, Plomberie, CFO/CFA) ✅ Élaboration de plans d’exécution et livrables BIM exploitables ✅ Coordination 3D entre les différents corps d’état

I specialize in product design, 3D modeling, rendering, and simulation. I am passionate about transforming concepts into high-quality, manufacturable products using advanced CAD software like SolidWor... Read more

I specialize in product design, 3D modeling, rendering, and simulation. I am passionate about transforming concepts into high-quality, manufacturable products using advanced CAD software like SolidWorks, AutoCAD, and Autodesk fusion 360. My expertise extends to FEA (Finite Element Analysis) and CFD (Computational Fluid Dynamics) simulations, ensuring that designs are not only visually appealing but also optimized for performance and efficiency. I have a keen eye for detail, enabling me to create realistic renders that bring designs to life and communicate ideas clearly. Whether it's creating complex assemblies, designing mechanical components, or conducting virtual testing and analysis, I am dedicated to delivering solutions that meet both aesthetic and functional requirements. Let’s collaborate to turn your ideas into reality with precision and creativity!"

✨ Mechanical Engineer | CAD • Simulation • MEP Specialist ✨ With 12+ years of cross-functional engineering experience, I bring a strategic blend of design, analysis, and execution. I turn ideas int... Read more

✨ Mechanical Engineer | CAD • Simulation • MEP Specialist ✨ With 12+ years of cross-functional engineering experience, I bring a strategic blend of design, analysis, and execution. I turn ideas into manufacturable, performance-validated, and field-ready solutions—whether it’s a product, a system, or a full-scale building workflow. ⭐Tools: SolidWorks | Fusion 360 | AutoCAD | Revit | ANSYS | SAP2000 | STA4CAD | Inventor | Excel | MS Project Core Expertise: ⭐Design & Product Development End-to-end design of mechanical parts, plastic components, and industrial products—ready for real-world production. ⭐Simulation & Analysis FEA & CFD-based structural, thermal, and fluid flow validation for optimized, reliable performance. ⭐MEP & Project Coordination HVAC, plumbing (clean, waste, fire), BIM clash control, BOQ/BOS documentation, and interdisciplinary integration. Why Work With Me? ⭐Holistic project vision—from concept to execution ⭐Field-tested, buildable solutions ⭐Precision-driven and detail-focused ⭐ Strong communicator across all disciplines ⭐ Fast, focused, and quality-oriented delivery Let’s connect and make your vision real—with results that are engineered to perform.

I am a mechanical engineer with more than ten years of experience in the field. (You can see my portfolio below). In the last 14 years, I've been designing different types of machines, parts, and asse... Read more

I am a mechanical engineer with more than ten years of experience in the field. (You can see my portfolio below). In the last 14 years, I've been designing different types of machines, parts, and assemblies. Additionally, I have "hands-on" experience assembling those designs in real life. I am an expert in Autodesk Inventor modeling and have experience working in Solidworks. I'm strongly familiar with different manufacturing technologies and know how to prepare blueprints from preliminary design up to full- detail design, including plans for welders, CNC, lathe, and more. I read, write, and speak Ukrainian, Russian, and English. For the last 5 years, before the war came to my home country, I had been building my own fish cannery. In addition to my engineering design skills, I know computer programming at a level that was sufficient to launch an e- commerce business that has been working for the last 6 years (www.tushe.od.ua). I'm a self-taught individual, and I have no issue learning new technical skills and am not afraid of new challenges. Skills • Mechanical Engineering, Product Development, Machines and Parts Assemblies (14 years of experience. Portfolio available below). • Autodesk Inventor (18 years of experience; first version used was Autodesk Inventor 9.0, 2005). • SolidWorks (2 years of experience). • 3-axis CNC milling machine operation (Some experience in creating G-codes and milling parts from steel, aluminum, plastic, and wood). • Manual Lathe and Milling Machines (Some experience). • TIG and MIG welding (5 years of experience). • JavaScript, CSS, SQL, PHP (Basic/Moderate. In 2019, created an online store from scratch for my brand of canned food "Tushe" at www.tushe.od.ua). • Adobe Photoshop, Illustrator (Created designs for my brand "Tushe"). • Microsoft Project (Some experience). • Other Skills (Food Machinery, Sheet Metal Fabrication, Electrical Design, Conveyor Systems, 2D Drawings, Hand Tools, Burning Torch, Prototyping, Plumbing, Air and Water Piping Systems).

BIM MEP specialist with over 10 years of experience in mechanical, electrical, and plumbing (MEP) engineering design and coordination using Autodesk Revit. I have worked on large-scale commercial, res... Read more

BIM MEP specialist with over 10 years of experience in mechanical, electrical, and plumbing (MEP) engineering design and coordination using Autodesk Revit. I have worked on large-scale commercial, residential, and industrial projects across Switzerland and Europe, delivering detailed BIM models, clash detection, construction documentation, and MEP coordination. Currently working as a freelance BIM consultant, primarily serving Swiss engineering firms with full MEP modeling, Revit family creation, template standardization, and multi-discipline coordination. Proficient in Revit MEP, AutoCAD, Navisworks, and related BIM workflows. Strong background in IFC-based open BIM processes and collaboration with architectural and structural teams. I deliver high-quality, precise models on time and adapt quickly to project-specific standards and workflows.

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential bu... Read more

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential buildings, C-Store, Fuel System, frames, plumbing -piping, fixtures, etc. I can work on plumbing and Fire protection drawings and MEP coordination. Aware of Plumbing design codes like IPC UPC, have used NFPA. I can do COMcheck, HVAC load calculations, plumbing pipe sizing, grease interceptor calculations, and permit plans.

Highly-motivated Revit Mep 3D Model & AutoCAD drafting professional with 11+ years of experience in managing multiple HVAC design/drafting projects HVAC equipment. Expertise in managing project acti... Read more

Highly-motivated Revit Mep 3D Model & AutoCAD drafting professional with 11+ years of experience in managing multiple HVAC design/drafting projects HVAC equipment. Expertise in managing project activities from conceptualization to execution including technical specifications, stage inspections, progress monitoring, vendor management, and manpower planning. Demonstrated strength in reviewing consultant’s design plans and drawings to develop an overview of the project and gain a complete understanding of both civil/structural and MEP construction activities

Hello everybody, welcome to my profile and I hope to be able best design for your project I'm mostafa anber from Egypt , I'm Mechanical Engineer Specialized in Design (HVAC,PLUMBING,FIREFIGHTING,SOL... Read more

Hello everybody, welcome to my profile and I hope to be able best design for your project I'm mostafa anber from Egypt , I'm Mechanical Engineer Specialized in Design (HVAC,PLUMBING,FIREFIGHTING,SOLIDWORKS) Systems with all available software (AUTOCAD , REVIT, SOLIDWORKS) And All Calculations -- MY Skills 1- HVAC design and software (Preparation & review of design, construction/execution and shop drawings, Design reports, Project Specifications and any other necessary documents pertaining to the design and construction of HVAC (Heating Ventilating and Air Conditioning) System,Create layout for equipment, ducting and piping of Heating, Ventilating and Air Conditioning (HVAC) System including sizing of pipes and ducts) - I use all international codes such as ( Ashrae , NFPA, UPC, IPC, UPC ,ASPE, SMACNA other International design codes) 2- Plumbing & Fire Fighting ( Designing, Shop Drawing, As Built drawing and Supervision services related to Plumbing, Firefighting systems ) 3- Duct and All HVAC , MEP Take off and Estimating 4- Simulation (Ventilation Using Ventsim Software , Hydraulic and Pneumatic Using FluidSim Software) 5-digital logic design 6- Convert PDF , JPG,Sketch to dwg or Rvt (AUTOCAD , REVIT) 7- Technical Reports (Cooling and Heating Loads reports , Ventilation Reports , External static pressure ,heat transfer , fluid mechanics , thermodynamics) 8- tutorial (HVAC , FIREFIGHTING , PLUMBING , DESIGN DRAWING , SHOP DRAWING , AUTOCAD , MEP , ARCH , REVIT , PHYSICS ,THERMODYNAMICS , HEAT TRANSFER , FLUID MECHANICS , MATHS,Dynamics,Hydraulics and Pneumatics,Calculus I- II,Differential Equations) ---- My Software Skills 1- Autodesk AutoCAD 2- Autodesk AutoCAD MEP ,ARCH 3- Autodesk Revit 4- Mechanical Ventilation Simulator (VentSim) 5-Hap program 6- Ductsizer 7- Elite programs 8-Pump Selection Software ( Dp selector , and Grundfos , KSP online selection) 9- Pump Sizing and pump Calculator 10- Autofluid 11- pipesizer 12- Microsoft office Software 13- Bluebeam 14 - SOLIDWORKS

We offer top-tier expertise in Construction Project Management, Architectural Plans and Designs, MEP plans and layout documentation, Building Cost Estimations, Bill of Quantities, and Work Program Sch... Read more

We offer top-tier expertise in Construction Project Management, Architectural Plans and Designs, MEP plans and layout documentation, Building Cost Estimations, Bill of Quantities, and Work Program Scheduling.

I'm Nurudeen, a skilled mechanical and piping engineer. Proficient in AutoCAD and Revit, I've successfully completed various design projects for residential and commercial spaces. A proud graduate of... Read more

I'm Nurudeen, a skilled mechanical and piping engineer. Proficient in AutoCAD and Revit, I've successfully completed various design projects for residential and commercial spaces. A proud graduate of Kwara State University Malete(KWASU), my expertise lies in precision and innovation. Ready to contribute to your engineering needs.

Scanotrek is a prominent company that specializes in providing outsourcing services across diverse fields. We are driven by a team of young and dynamic professionals who leverage innovative ideas to s... Read more

Scanotrek is a prominent company that specializes in providing outsourcing services across diverse fields. We are driven by a team of young and dynamic professionals who leverage innovative ideas to solve complex problems and deliver efficient services with quick turnarounds.

MEP Engineer | Skilled in HVAC, Electrical & Plumbing Systems|Skilled MEP Engineer with hands-on understanding of HVAC, electrical distribution, plumbing layouts, and fire-fighting systems, focused on... Read more

MEP Engineer | Skilled in HVAC, Electrical & Plumbing Systems|Skilled MEP Engineer with hands-on understanding of HVAC, electrical distribution, plumbing layouts, and fire-fighting systems, focused on ensuring quality, safety, and smooth project exec

I am a Graduate Electrical Engineer with strong expertise in MEP design and drafting and professional experience in Architectural 2D drafting using AutoCAD. I specialize in delivering precise, high-qu... Read more

I am a Graduate Electrical Engineer with strong expertise in MEP design and drafting and professional experience in Architectural 2D drafting using AutoCAD. I specialize in delivering precise, high-quality technical drawings that meet industry standards and client requirements. With a solid engineering background, I bring both technical accuracy and practical design understanding to every project. My focus is on creating clear, detailed, and constructible drawings that streamline project coordination for architects, contractors, and engineering teams. What I Offer MEP Drafting & Design Electrical layout plans, lighting layouts, power distribution, single line diagrams (SLD), and coordinated MEP drawings (Plumbing layouts, HVAC drawings and Fire protection and detection drawings) Architectural Drafting (2D AutoCAD) Floor plans, sections, elevations, site plans, furniture layouts, and detailed construction drawings. Professional CAD Services Redrawing from sketches/PDFs, updating existing drawings, and preparing documentation for permits or construction. Why Work With Me Strong engineering foundation—ensures accuracy and practical solutions Fast and reliable delivery with excellent attention to detail Clear communication and full commitment to client satisfaction Experienced AutoCAD specialist with consistent, professional output I am dedicated to helping you bring your architectural and MEP concepts to life with clean, organized, and technically sound drawings.

Hello!! 👏 I'm Babu Ahamed. I am an expert Architect and ( Interior & Exterior) designer, Landscape Architect with more than 12 years of professional experience, carrying out highly creative and high... Read more

Hello!! 👏 I'm Babu Ahamed. I am an expert Architect and ( Interior & Exterior) designer, Landscape Architect with more than 12 years of professional experience, carrying out highly creative and high-quality Residential and Commercial projects. I am highly creative and detail-oriented, with extensive experience in the programs I use which include: - AutoCAD - SketchUp - D5 Render - Photoshop -Revit -V-ray, Nxt Render, Corona render -Visualization My expertise allows me to deliver high-quality work with a quick turnaround time. I look forward to the opportunity to collaborate with you soon! ⏯ Services I Offer : ~ Interior & Exterior Design ~ Architectural Visualization ~ CAD plans & Elevation ~ Concept Design ~ Dining, Living, Bedroom, Kitchen & Bath Design ~ Furniture Arrangements & Lightning plan ~ Office room design & decorator ~ Landscape Design, Landscape Architect ~ PDF drawing convert to CAD ~ Re-Design, drawing any Architectural Floor Plan. *** Design is my passion and my work and I will be happy to create the best version of your project. You just need to roll up to the top of this page and click on" Invite to job ". Send me a brief description of what you need and I will be in touch with you right after that. Thanks Babu

I am a Professionally Registered Chartered Mechanical Engineer with expertise in designing Building Services Engineering, Public Health, Fire Protection, Primary, Secondary, Tertiary and Drip Irrigati... Read more

I am a Professionally Registered Chartered Mechanical Engineer with expertise in designing Building Services Engineering, Public Health, Fire Protection, Primary, Secondary, Tertiary and Drip Irrigation, Natural and LPG Gas and HVAC Systems Design and Engineering. I have worked on various projects such as Airports, Metro, Stadiums, Residential Townships, Thematic Pavilions, Ports, Residential accommodation, and high-rise buildings.

I am a seasoned MEP Design Engineer with over 15 years of experience in delivering top-notch MEP (Mechanical, Electrical, and Plumbing) solutions for a wide array of projects including commercial, res... Read more

I am a seasoned MEP Design Engineer with over 15 years of experience in delivering top-notch MEP (Mechanical, Electrical, and Plumbing) solutions for a wide array of projects including commercial, residential, hospitals, hotels, and educational facilities. My expertise, combined with a dedicated team of professionals, ensures comprehensive and tailored MEP services to meet your project needs. My Expertise: ★ Mechanical Engineering: Efficient HVAC and fire protection systems. ★ Electrical Engineering: Innovative lighting and power systems. ★ Plumbing Engineering: Reliable water supply and drainage systems. Services Offered: Electrical: ★ Lighting Layout ★ Small Power Layout ★ Lightning Protection & Earthing Layout ★ IT Layout ★ Security, CCTV & Access Control System Layout ★ Fire Alarm & Emergency Lighting Layout ★ Public Address System Layout, ACS control system ★ Load Schedule & Single Line Diagram ★ One Line Diagrams ★ Solar System Design ★ Helioscope Simulation ★ PVSyst Simulation Mechanical: ★ Cooling and heating system designs per standards ★ Ducting design and sizing ★ Load calculations using HAP software ★ Ventilation and exhaust design ★ Equipment scheduling ★ Schematic design ★ HVAC Layout ★ Manual J ★ Manual D ★ Manual S ★ Ventilation Layout ★ Smoke Ventilation Layout ★ Fire Fighting Layout Plumbing: ★ Drainage and water supply layouts (hot and cold) ★ Vent and gas supply systems ★ Isometric/riser diagrams for plumbing ★ Pump calculations ★ Fixture scheduling ★ Stormwater calculations ★ Septic tank design Fire Suppression System: ★ Sprinkler design ★ Hydraulic calculations ★ Pump scheduling and capacity planning ★ Pipe sizing Why Choose Me? ★ 100% Satisfaction Guaranteed: Striving for perfection in every project. ★ Unlimited Revisions: Commitment to revisions until full satisfaction. ★ Precision and Accuracy: Detailed and precise designs. ★ Quick Turnaround: Deliverables within 24 to 48 hours without compromising quality. My Team: ★ 2 Mechanical, Plumbing, and Fire Engineers ★ 1 Structural Engineers ★ 2 Senior MEP Engineers ★ 1 Electrical Engineer ★ 4 Draftspersons ★ 2 Architects We provide expert MEP services for residential buildings, apartments, and villas, ensuring your project's success. Contact me today to discuss your requirements and bring your vision to life with professional, reliable MEP solutions. #draftsman #draughtsman #drafter #cad #autocad #draftsmen #draughtsmen #electrical #MEP #revit #PDMS #autocad #draftsman #drafting #cad #drafter #caddesign #Electrical #Instrument #Instrumentation #oilandgas #marineindustry #shipbuilding #remote #virtual #interim #remotedraftsman #virtualdraftsman #interimdraftsman #KB #oleg #helpme #Covid19 #draughtsman #draftsmen #draughtsmen #electricaldraftsman #electricaldrafter #lookingforjob #maritimeindustry #maritime #marine #activelylooking #marineengineering #freelance #gulf #Qatar #Doha #Oman #Dubai #AbuDhabi #UAE #SaudiaArab #KSA

Senior Mechanical Engineer with 10 years of experiance in building services industry. Expert in AutoCad and Revit

Senior Mechanical Engineer with 10 years of experiance in building services industry. Expert in AutoCad and Revit

Experienced HVAC Design Engineer with 14 years of professional experience in HVAC load calculations, ductwork design, system optimization,Hydronic Balancing-System Balancing-Water and Termal Balancing... Read more

Experienced HVAC Design Engineer with 14 years of professional experience in HVAC load calculations, ductwork design, system optimization,Hydronic Balancing-System Balancing-Water and Termal Balancing. I deliver accurate HAP load reports, efficient duct layouts (AutoCAD/Revit), and fully compliant ASHRAE-based solutions, including Manual J / S / D documentation. I also develop Python automation tools for engineering workflows, reporting, and data processing. Let’s improve your building performance and reduce energy costs with precise, code‑compliant design.

Degree-holding Computer Engineer with experience in robotics manufacturing, facilities automation, and much more. Familiar with all facilities mechanical systems including industrial and commercial eq... Read more

Degree-holding Computer Engineer with experience in robotics manufacturing, facilities automation, and much more. Familiar with all facilities mechanical systems including industrial and commercial equipment.

As a Projects Engineer, I am skilled in project planning, operations management, stakeholder engagement, technical expertise and team leadership with keen commitment to excellence. I am adept at manag... Read more

As a Projects Engineer, I am skilled in project planning, operations management, stakeholder engagement, technical expertise and team leadership with keen commitment to excellence. I am adept at managing budgets, mitigating risks, and ensuring effective communication throughout the project lifecycle. Working with diverse teams, expats, and cultures, I am confident in my ability to drive successful project outcomes and exceed client expectations.

I’m a BIM engineer with over 4 years of experience in HVAC and MEP system design and modeling. At Ventusus Kft., I’m responsible for managing and optimizing BIM workflows across various project types.... Read more

I’m a BIM engineer with over 4 years of experience in HVAC and MEP system design and modeling. At Ventusus Kft., I’m responsible for managing and optimizing BIM workflows across various project types. My work includes model coordination, clash detection, report generation, and quality control throughout all project phases. I’m also familiar with automating repetitive modeling tasks using Dynamo to increase efficiency and consistency. I’m proficient in Autodesk Revit and Navisworks, and have hands-on experience working in Autodesk Construction Cloud (ACC) and Dalux CDE environments. I’m detail-oriented, reliable, and passionate about delivering accurate and well-coordinated BIM models that support efficient project delivery.