Hire the best freelance Fixture Design expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

We are an Engineering Product Design & Development services company having vast experience with OEM and Service Industry. We offer complete engineering solutions from Concept design to release of m... Read more

We are an Engineering Product Design & Development services company having vast experience with OEM and Service Industry. We offer complete engineering solutions from Concept design to release of manufacture drawings including , Forming, and prototype build solutions. Radiant Design has a team of experts in the following areas ​ -CAD conversions -Machine Design -Product Design -Reverse Engineering -Tools and Fixtures design -Finite Element Analysis (FEA) -CAD Rendering -Mould Design & Analysis -Enclosure/Case Design -3D Printing/Vacuum Casting -Manufacturing/Prototyping

As a Mechanical Design Engineer, I help businesses turn ideas into manufacturing-ready products using SolidWorks. Whether you need a functional prototype, a production jig, or a reverse-engineered des... Read more

As a Mechanical Design Engineer, I help businesses turn ideas into manufacturing-ready products using SolidWorks. Whether you need a functional prototype, a production jig, or a reverse-engineered design, I deliver clean, practical solutions that work on the shop floor. I’ve worked on real-world products like lighting fixtures (chandeliers, lamps), gas cooker grates, and custom sheet metal parts. I also design dies and tools for production, ensuring each part is optimized for both function and manufacturability. 🔧 Here’s how I can help your project: - 3D CAD Modeling & Assembly (SolidWorks) - Sheet Metal & Plastic Product Design - Welding Jig & Fixture Design - Tool & Die Design - Reverse Engineering & Redesign - BOM Creation, Costing & ERP Integration (Excel + Microsoft AX) - 2D Drawings with GD&T for manufacturing I don't just design for looks — I design for production, cost-efficiency, and operator usability. I also speak the language of manufacturers, which means fewer revisions and smoother handoffs. Let’s work together to bring your idea into a well-built, ready-to-manufacture design.

I am a Mechanical CAD Designer specializing in 3D modeling, mechanical part design, assemblies, engineering drawings, and machine design using SolidWorks. I can create accurate 3D CAD models, manufac... Read more

I am a Mechanical CAD Designer specializing in 3D modeling, mechanical part design, assemblies, engineering drawings, and machine design using SolidWorks. I can create accurate 3D CAD models, manufacturing-ready 2D drawings, assemblies, sheet metal components, mechanical brackets, shafts, fixtures, and custom machine components based on sketches, dimensions, reference images, or existing designs. My focus is on practical and manufacturable designs with proper dimensions, tolerances, material considerations, and assembly requirements. Services I can provide: • 3D part modeling and mechanical components • SolidWorks assemblies • 2D manufacturing drawings • Sheet metal and structural design • Machine and fixture design • Mechanical brackets, shafts, clamps and supports • Design modifications and reverse engineering • CAD conversion from sketches/images • Basic GD&T and manufacturing documentation I am detail-oriented, responsive, and focused on delivering clean, practical CAD models that are suitable for manufacturing and prototyping.

I am a Mechanical Design Engineer and Freelance CAD Designer specializing in 3D CAD Modeling, Machine Design, Jig & Fixture Design, and Manufacturing Drawings. I work with SolidWorks, AutoCAD, and CA... Read more

I am a Mechanical Design Engineer and Freelance CAD Designer specializing in 3D CAD Modeling, Machine Design, Jig & Fixture Design, and Manufacturing Drawings. I work with SolidWorks, AutoCAD, and CATIA V5 to develop practical and manufacturing-ready mechanical designs. My services include: • 3D CAD Modeling & Assembly Design • Machine Design & Development • Jig, Fixture & Tooling Design • Sheet Metal Design • Mechanical Component Design • 2D Manufacturing Drawings & GD&T • Reverse Engineering • Product Design & Development • Concept & Prototype Design • Design Modification & Optimization • BOM and Technical Documentation I focus on accurate, functional, and manufacturing-oriented designs while maintaining clear communication throughout the project. I am available for freelance, project-based, and long-term mechanical CAD design work.

New Product Development (NPD) • Research & Development (R&D) • Industrial/Fabrication Drawings (2D) • SHEET-METAL Product (2D & 3D) • Automotive Products.

New Product Development (NPD) • Research & Development (R&D) • Industrial/Fabrication Drawings (2D) • SHEET-METAL Product (2D & 3D) • Automotive Products.

(Mechanical CAD Engineer | SolidWorks | AutoCAD | Fusion 360 | Creo | Inventor | 3D Modeling | Product Design | Reverse Engineering | Manufacturing Drawings) Looking for a Mechanical CAD Engineer w... Read more

(Mechanical CAD Engineer | SolidWorks | AutoCAD | Fusion 360 | Creo | Inventor | 3D Modeling | Product Design | Reverse Engineering | Manufacturing Drawings) Looking for a Mechanical CAD Engineer who can transform your concept into a production-ready design? I provide professional Mechanical CAD and Product Design services for startups, inventors, manufacturers, engineering firms, and businesses that need precise, manufacturable CAD models and technical documentation. Whether you have a rough sketch, hand drawing, PDF, image, or an existing model that needs improvement, I can deliver accurate engineering solutions tailored to your project. Using industry-leading software including SolidWorks, AutoCAD, Fusion 360, PTC Creo, and Autodesk Inventor, I create high-quality 2D drawings, 3D CAD models, assemblies, engineering documentation, and manufacturing files that are ready for fabrication, CNC machining, laser cutting, injection molding, or 3D printing. Services I Offer: ✔ Mechanical Design ✔ 2D CAD Drafting ✔ 3D CAD Modeling ✔ Product Design & Development ✔ Reverse Engineering ✔ Manufacturing Drawings ✔ Assembly Design ✔ Exploded Assembly Drawings ✔ Engineering Drawings ✔ Technical Documentation ✔ Machine Part Design ✔ Industrial Product Design ✔ Sheet Metal Design ✔ Surface & Solid Modeling ✔ Parametric CAD Modeling ✔ Prototype Design ✔ Design for Manufacturing (DFM) ✔ Bill of Materials (BOM) ✔ CAD File Conversion ✔ PDF/Image/Sketch to CAD ✔ STL, STEP, IGES, DWG & DXF File Creation ✔ 3D Printing Files ✔ CNC Manufacturing Drawings ✔ Product Rendering & Visualization Software Expertise: • SolidWorks • AutoCAD • Autodesk Fusion 360 • Autodesk Inventor • PTC Creo • CATIA • Siemens NX • Blender • KeyShot Why Choose Me? ✔ Manufacturing-ready CAD models ✔ Accurate dimensions and GD&T where required ✔ Clean, organized engineering files ✔ Fast communication and regular updates ✔ High attention to detail ✔ Support from concept to final production ✔ Reliable turnaround and on-time delivery Whether you need a single mechanical component, a complete product assembly, reverse engineering of an existing part, or detailed manufacturing documentation, I deliver accurate, functional, and production-ready designs that meet industry standards. Let's turn your idea into a professional engineering solution.

With over 8 years of experience as a Mechanical & Planning Engineer, I've specialized in Design and Detailed Engineering for both greenfield and brownfield projects across the automotive and oil & gas... Read more

With over 8 years of experience as a Mechanical & Planning Engineer, I've specialized in Design and Detailed Engineering for both greenfield and brownfield projects across the automotive and oil & gas sectors. My project portfolio includes Production facilities, Wellheads, Pipelines, Gas Processing Plants, Refineries, Bulk Oil Terminals, and Lube Plant projects. I'm adept at managing projects from the bidding stage to commissioning while adhering to project constraints. Currently, I'm serving as a mechanical & planning engineer across multiple projects.

I am a Trim Fixture & Sheet Metal Stamping Die Specialist with 8 years hands-on experience in automotive industry (Pakistan). I design: - Trim Fixtures, Form Fixtures, Pierce Fixtures - Stamping Dies... Read more

I am a Trim Fixture & Sheet Metal Stamping Die Specialist with 8 years hands-on experience in automotive industry (Pakistan). I design: - Trim Fixtures, Form Fixtures, Pierce Fixtures - Stamping Dies for complex panels - Example: T-Panel with 39 slotted cutouts - 100% production-ready Software Expert: Delcam PowerSHAPE 2015, PowerMill, SolidWorks, AutoCAD What you get: 3D Assembly + 2D Detailed Drawings with GD&T + STEP/IGES + DXF - ready for CNC. I work 40+ hours/week, available in US night shift (PST). Let's make your tool ready for machining!

I specialize in CNC CAD/CAM design and manufacturing-ready solutions for furniture, cabinetry, and custom woodworking projects. I can turn concepts, sketches, dimensions, and existing drawings into ac... Read more

I specialize in CNC CAD/CAM design and manufacturing-ready solutions for furniture, cabinetry, and custom woodworking projects. I can turn concepts, sketches, dimensions, and existing drawings into accurate 2D/3D CAD models and CNC-ready production files. My services include: • 2D & 3D CAD design • CNC programming and CAM • Furniture and cabinetry design • Manufacturing and assembly drawings • CNC toolpaths • Sheet nesting and material optimization • DXF and production-ready files • Design for manufacturing (DFM) I focus on practical designs that can actually be manufactured efficiently, not just models that look good on screen. If you have a drawing, sketch, photo, or idea, I can help turn it into a clear and production-ready solution.

CAREER OBJECTIVES: To be a part of a growing and reputed organization, which provides sample opportunities for me to utilize my knowledge and skills thereby, contributing to the success of the orga... Read more

CAREER OBJECTIVES: To be a part of a growing and reputed organization, which provides sample opportunities for me to utilize my knowledge and skills thereby, contributing to the success of the organization, and thus leads to my professional and personal growth. STRENGTHS:  Well Regarded for inter personal, written and oral communication skill.  Can handle multiple tasks simultaneously.  Ability to acquire and apply knowledge rapidly.  Can work independently with minimal supervision and contributes to a team.  Supportive attitude.  Loyal. WORK EXPERIENCE: • Having 6 years of Experience in TOOL FIXTURE DESIGN. CURRENT WORK EXPERIENCE: • Presently Working with ONWARD TECHNOLOGIES LIMITED as a Senior Design Engineer from 29th NOV 2016 to till date. PREVIOUS WORK EXPERIENCE: • Worked with GGS ENGINEERING SOLUTIONS PVT LTD as a Design Engineer from 03rd of August 2015 To 25th November 2016(1.3 YRS) • Worked with CADTECH ENGINEERING SOLUTIONS PVT.LTD. As a CAD ENGINEER in PUNE From 09TH MARCH 2012 TO 01ST AUG 2015 (3.5 YRS) (ON SITE WORKED IN JOHN DEER INDIA PVT LTD). • Worked with LITEX ELECTRICAL PVT LTD as a PROJECT ENGINEER from 1ST AUG. 2011 to 28TH FEB 2012.(08 MONTHS) RESPONSIBILITIES IN CURRENT ORGANISATION • Concept design for welding fixtures, Assembly fixtures, Machining fixtures and Gauges for Johndeere products. • Preparing manufacturing drawing for the same. • Project Management. • Design review. • Quality check. • Simulation study for fixtures. • Check in the tools to PDM after final Review. • Leading and guiding the team members. (4 members) • Attending meetings with customer for better improvements in design. RESPONSIBILITIES IN PREVIOUS ORGANISATION (LITEX):  Receiving the work from customer.  Modeling and drafting and design of jigs and fixtures and gauges.  Submission of designs to Peer QC for final approval.  Defect Prevention and Process Improvement activity.  Software used: Pro- E wildfire 4.0 (wind chill), Auto CAD 2010.  Projects carried out:  LAMP FIXTURE & GUAGE  PRESS SEAL FIXTURE  SUPPORTING JIG AND GUAGE.  ROD WELDIND AND CUTTING FIXTURE.  DESIGNED OF CUTTING AND CRIMPING M/C  DESIGNE OF TUBE CUTTING M/C  LAMP CAP FIXTURE. • SOFTWARES USED: PRO-E WILD FIRE 4.0, AUTO CADD 2009. • OTHER TRANINING PROGRAMS:- ATTENDEND ON JOB TRAINING IN NTTF INDUSTRIES LTD. BANGALURU. DURATION: 50 DAYS. • ACTIVITIES:  KNOWING VARIOUS DEPARTMENTS & ACTIVITIES.  KNOWING PRODUCTION ACTIVITIES.  KNOWING DESIGN STANDARDS.  DETAILING OF TOOL ELEMENTS.  MODELLING AND ASSEMBLING OF PARTS. ACADEMIC DETAILS: B.TECH IN MECHANICAL ENGINEERING: Duration : 2011-2014. Institution: JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY (HYDERABAD). Result : 68.0%. POST DIPLOMA IN TOOL DESIGN: Duration : 2009-2010. Institution: NETTUR TECHNICAL TRAINING FOUNDATION (NTTF) DHARWAD. Result : 6.98 SGPA. DIPLOMA IN TOOL AND DIE MAKING: Duration : 2005-2009. Institution: NETTUR TECHNICAL TRAINING FOUNDATION (NTTF). Result : 65.06%. S.S.L.C: Duration : 2004-2005. Institution: CHALLAPALLI PUBLIC SCHOOL. Result : 78.0% SOFTWARE PROFICIENCY:  CREO  Pro-E – Wild fire 5.0.  Solid works.  Auto CAD 2009.  CATIA V5 (BASIC). SPECIALIZATION:  Mould Design Technology  Press Tool Design Technology  Jigs & fixtures Design  Material Technology  Geometrical Dimensioning & Tolerance. • HOBBIES:- Reading books, News paper, Internet browsing, listening music, cricket, chess. PERSONAL DETAILS: Name : P.V.B MURALI KRISHNA. Father’s Name : P.SATYANARAYANA. Date of Birth : 14/01/1990. Sex : Male. Nationality : Indian. Languages known : English, Hindi, Telugu. Marital Status : Single. Passport No : J6324202 Permanent Address : P.V.B MURALI KRISHNA. S/O P.SATYANARAYANA. GHANTASALA PALEM, GHANTASALA (M.D), KRISHNA (D.T) ANDHRAPRADESH-521133

I finished my education in master of mechanical engineering in 2014 from the University Technology Malaysia (UTM) with overall-score/Final-CGPA: (3.73/4). I have worked for more than 11 years in the f... Read more

I finished my education in master of mechanical engineering in 2014 from the University Technology Malaysia (UTM) with overall-score/Final-CGPA: (3.73/4). I have worked for more than 11 years in the field of mechanical engineering. Some of my duties in summary are : Working as project manager, Designing supervisor, Product Designer, injection Mold tooling designer, Control and production Fixture designer, Automatic production line designer, CNC Specialist, Mold Manufacturing process manager, Production process manager.

Greetings of the day, ● Knowledge of AUTO CAD, SOLID WORK & CATIA design software ● Many types of special precision chucks, fixture design in 2D & 3D ● Work on that software, knowledge in attachment... Read more

Greetings of the day, ● Knowledge of AUTO CAD, SOLID WORK & CATIA design software ● Many types of special precision chucks, fixture design in 2D & 3D ● Work on that software, knowledge in attachment layout with convert in std. ● Knowledge of process in manufacture part & which metal to suit part in work holding ● Precision tolerance part, tolerance & fit knowledge, symbol & where are use std. diameters. ● Conceptual and detail design of Special Hydraulic and manual fixture, Hydraulic Cylinders and other work holdings ● types of equipment for machine tools and just started with Special Purpose Machines. ● Reverse Engineering of existing mechanisms/equipment. ● 3D modeling, Detailing & preparing manufacturing drawings for key customers. ● Costing and Estimation of the Projects. ● Preparation of Process Planning and Stage wise process drawings for effective manufacturing. ● Coordinate with Production and Manufacturing departments to monitor and support the process of the project. ● Coordinate with suppliers/vendors for outsource & commercial products. ● Overall design parameter calculation, part-list generation w.r.t general assemblies and technical documentation. ● Responsible for troubleshooting of machines. ● Knowledge of control plan. I would be happy to join a work.

I am a mechanical CAD/CAM engineer specializing in reverse engineering, production-ready 3D modeling, manufacturing documentation, and CNC-oriented product development. I reconstruct accurate editabl... Read more

I am a mechanical CAD/CAM engineer specializing in reverse engineering, production-ready 3D modeling, manufacturing documentation, and CNC-oriented product development. I reconstruct accurate editable CAD models from STL files, 3D scans, technical drawings, photographs, measurements, and existing physical parts. My work is based not only on reproducing visible geometry but also on understanding how the part is manufactured. I design models according to real production processes, including turning, milling, drilling, stamping, bending, casting, injection molding, and multi-axis CNC machining. My typical deliverables include: • Editable parametric 3D models • STEP and native CAD files • CNC-ready DXF contours • Assemblies and manufacturing drawings • Geometry and tolerance verification • Design-for-manufacturing review • Preliminary manufacturing process recommendations I work with SolidWorks, TopSolid CAM, KOMPAS-3D, AutoCAD, and Geomagic Design. My experience includes industrial equipment, machining fixtures, injection-molded products, oil and gas equipment, automotive components, medical instruments, and custom mechanical products. I focus on accurate geometry, manufacturability, clear communication, and reliable delivery. Before starting a project, I review the available source data, identify technical risks, and clearly define what level of accuracy can realistically be achieved.

Mechanical Engineer with 2+ years of experience in CAD design, product development, and manufacturing engineering. Delivered production-ready designs across aerospace and automotive industries at DRDO... Read more

Mechanical Engineer with 2+ years of experience in CAD design, product development, and manufacturing engineering. Delivered production-ready designs across aerospace and automotive industries at DRDO and TATA Motors. Skills & Tools: CATIA V5 · SolidWorks · AutoCAD · Fusion 360 · GD&T (ASME Y14.5) · Sheet Metal · Fixture Design · BOM · PPAP · AS9100 Key Accomplishments: -Designed a high-pressure pneumatic valve at DRDO with 80% efficiency improvement -Managed 15+ projects with full engineering documentation at AS9100 standards -Reduced assembly line cycle time by 5% at TATA Motors -Patent-pending sustainable toothbrush design validated with FEA (ANSYS) -Delivered 30+ product design in current organisation Education: B.E. Mechanical Engineering — KLE Technological University, 2024

Skilled with incorporating design features required for most disciplines of manufacturing methods including: -Metal stamping, casting and machining -Plastic injection, vacuum and blow molding -Additi... Read more

Skilled with incorporating design features required for most disciplines of manufacturing methods including: -Metal stamping, casting and machining -Plastic injection, vacuum and blow molding -Additive manufacturing (FDM) Also skilled in product system design assembled with: -Welding (arc, resistance, laser) -Riveting -Threaded fasteners Other skills include: -Check fixture design -Weld fixture design -PowerPoint -NX CAD In-house capabilities*: CAD software: Solidworks 2026 Equipment: -3D FDM printing (ABS) 10"x10"x12" Stratasys Fortus 250MC -3D Scanning (Peel3) -Metal Fabrication (mig/tig/stick welding) plasma cutting, vertical knee mill. *Hourly rate will vary less

Result Oriented manufacturing expert with more than 30years of experience with Designing experience. Worked with some of the leading tool rooms in India as well as Singapore. Thorough knowledge of var... Read more

Result Oriented manufacturing expert with more than 30years of experience with Designing experience. Worked with some of the leading tool rooms in India as well as Singapore. Thorough knowledge of various manufacturing processes such as Injection Moulding, Sheet metal Stamping, Die Casting, Component Machining, Fabrications, Surface Treatments. Hands-on experience with manufacturing machines such as CNC Milling, Spark EDM..etc. Experienced in the fields such as DFM (Design for Manufacturing) for Plastic, Sheet metal, or machined components, Component Drawings with GD&T, Sheet Metal Design/Fabrication, Mold, Press Tool, Fixture Designing, etc. ✅ 3D Modelling, 2D Drafting ✅ Component Drawings with GD&T for Manufacturing ✅ Sheet Metal Fabrication Drawings ✅ Plastic Models/Design for Mold ✅ 3D Printing Design/Model ✅ Engineering Drawings/Technical Drawings ✅ Mold design ✅ Press tool design ✅ Fixture Design

Mechanical Design engineer / Draftsman Specialized in Mechanical Engineering (Product Design, Prototyping services), Architecture. i have 4.5 year experience in design. My services includes -Conc... Read more

Mechanical Design engineer / Draftsman Specialized in Mechanical Engineering (Product Design, Prototyping services), Architecture. i have 4.5 year experience in design. My services includes -Concept design, Product design, Engineering drawing, Mechanism Design and Prototyping services. Plastic and sheet metal parts modeling, mold and Tool design and fixture design.

Hello, I am a senior hardware engineer with over 10 years of experience in the entire product lifecycle development of electronic products, covering all aspects from initial product design and PCB dev... Read more

Hello, I am a senior hardware engineer with over 10 years of experience in the entire product lifecycle development of electronic products, covering all aspects from initial product design and PCB development to component procurement, mass production, and solution cost optimization. I am dedicated to bridging the gap between hardware engineering and supply chain management, helping global customers, hardware startups, and EMS companies bring reliable products to market while addressing component shortages and reducing overall bill of materials (BOM) costs. 🔧 Core Expertise and Skills • Hardware and Product Design: Embedded circuit design, schematic drawing, and system architecture optimization. • PCB Development: Multi-layer PCB layout, signal integrity, and design for manufacturing/assembly (DFM/DFA). • Procurement and Supply Chain: Strategic component sourcing, identification of discontinued/obsolete components, and supplier management. • Mass Production Support: New Product Introduction (NPI), test fixture design, and production line troubleshooting. • Solution Cost Optimization: Pin-to-pin IC cross-referencing (e.g., STM32 vs. GD32, TI/ADI vs. 3PEAK) saves 20%–40% of total BOM cost without impacting performance. 🏆 Key Achievements and Impact • Resolving End-of-Lifecycle and Stockout Issues: Successfully found direct domestic alternatives for critical MCUs and high-precision operational amplifiers for US/EU customers, avoiding months of redesign delays. • Cost Reduction: Optimized complex BOMs for commercial and industrial products, reducing component costs by up to 35%. • Smooth Production: Guided multiple hardware projects from prototyping to mass production, achieving zero field failures. 🎓 Education Background • Expert in Electronic/Electrical Engineering (or related fields) • In-depth understanding of the Asian and global semiconductor supply chains. Whether you need a complete PCB redesign, assistance with mass production, or urgent search for alternative ICs to circumvent supply chain bottlenecks, I can help. Please send us your project details or bill of materials immediately so we can conduct a rapid technical assessment!

I possess nearly 20 years successful experience as a Manufacturing Engineer with experience in a diverse set of disciplines including but not limited to Aerospace Manufacturing Process development, Pr... Read more

I possess nearly 20 years successful experience as a Manufacturing Engineer with experience in a diverse set of disciplines including but not limited to Aerospace Manufacturing Process development, Project management, research and development of various hydraulic and pneumatic valves and seals, airfoil manufacturing, new product design, multi-axis cnc programming using Mastercam 2017 and NX11, Fixture design, 3D modelling using solidworks, tool and die making with a focus on progressive stamping and roll design, precision grinding, multi-axis swiss style screw machine programming and the capacity to set-up and program virtually any machine in the precision manufacturing industry. I have nearly 20 years experience in aerospace manufacturing with knowledge of engineering quality management systems and first article approval processes such as CIPT, DFMEA, PFMEA, QAD, and PPAP. I am seeking to become a contracted independent manufacturing process engineer with the capacity to help with turn key manufacturing solutions that would include on-site training and CNC set-up. I am confident that my successful manufacturing engineering and process development would be an efficient and cost effective solution to all your design and engineering needs. Please feel free to contact me with any questions you may have or any scale project you may need help with.

 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fan... Read more

 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fanuc, Siemmen, Heidenhain... - Machine: Hass, Fidia, Makino, Matsuura... - Material: Aluminium, titanium, plastic... • 2D drafting • Shop document • Verify program • Fist article sheet • Maintenance old program, optimize for production  2009– 2011: CAD/CAM/CNC staff at International Corporation Trung Dung • 3D modeling from 2D drawing, sketch, picture, old model • CNC programming • Set up and operate • Inspection part

Experienced as Fixture Design and Mechanical design who used to create flow process using NX siemens, SolidWorks and Autodesk inventor.

Experienced as Fixture Design and Mechanical design who used to create flow process using NX siemens, SolidWorks and Autodesk inventor.

Given my experience of 6.5 years in BIW & Fixture Design, Project Management, Product design I pride myself in being associated with Onward Technologies Ltd. As Design Engineer for over 3 years and... Read more

Given my experience of 6.5 years in BIW & Fixture Design, Project Management, Product design I pride myself in being associated with Onward Technologies Ltd. As Design Engineer for over 3 years and implementing pure Domain knowledge to meet customers’ expectations by managing team member. During all my jobs I have performed and utilising my knowledge to Design tools (Fixture, Press Die and SPM) ergonomic and cost effective with zero error deliverables.

HI I AM MOHD SAJID I HAVE EXPERTISE IN SHEETMETAL AND FIXTURE DESIGNS I NEED UR FULL SUPPORT IN PROJECTS BECAUSE VAGUE DATA DO US BOTH NO GOOD LIKE BEND RADIUS OF MACHINE OR CUSTOM PROFILE IF USING AN... Read more

HI I AM MOHD SAJID I HAVE EXPERTISE IN SHEETMETAL AND FIXTURE DESIGNS I NEED UR FULL SUPPORT IN PROJECTS BECAUSE VAGUE DATA DO US BOTH NO GOOD LIKE BEND RADIUS OF MACHINE OR CUSTOM PROFILE IF USING ANY

VMC hydraulic &Manual fixture design, HMC fixture design, CNC turning fixture design, Receiving gauge design

VMC hydraulic &Manual fixture design, HMC fixture design, CNC turning fixture design, Receiving gauge design

I'm a mechanical engineer with 02 years of professional experience, I’m hardworking and passionate about finding efficient solutions to challenging problems. I have plenty of experience with SolidWor... Read more

I'm a mechanical engineer with 02 years of professional experience, I’m hardworking and passionate about finding efficient solutions to challenging problems. I have plenty of experience with SolidWorks, Auto-cad and UGS NX. I have designed various press tools, injection mould tools, jigs and fixtures.

Mechanical design engineer with experience in industrial equipment, fixtures, and production systems. Skilled in SolidWorks for 3D modeling, assemblies, and manufacturing drawings ready for fabricati... Read more

Mechanical design engineer with experience in industrial equipment, fixtures, and production systems. Skilled in SolidWorks for 3D modeling, assemblies, and manufacturing drawings ready for fabrication. I focus on designs that are practical, manufacturable, and reliable in real production environments. Experience includes: Fixture and jig design for production and assembly Industrial equipment and automation systems Sheet metal design and fabrication drawings 2D to 3D conversion (PDF/DWG to solid models) Manufacturing drawings with tolerances and standards I regularly work with input from production, maintenance, and quality teams to ensure designs meet functional and manufacturing requirements.