Hire the best freelance Embedded Systems expert designers for your company

I am an experienced electronics design and development specialist with a strong hands-on background in circuit design, PCB layout, prototyping, testing, troubleshooting, and product development. My e... Read more

I am an experienced electronics design and development specialist with a strong hands-on background in circuit design, PCB layout, prototyping, testing, troubleshooting, and product development. My experience includes switch-mode power supplies, motor controls, analog and digital electronics, embedded systems, PCB design/layout, surface-mount electronics, and electronic test systems. I have previous professional experience with Altium Designer and currently work with Fusion 360 for mechanical CAD and electro-mechanical integration. I am particularly effective at troubleshooting difficult hardware problems and improving existing designs. My background includes developing power electronics, designing automated test equipment, building prototypes, performing board-level troubleshooting, and creating technical documentation and test procedures. I also develop ESP32-based embedded and IoT projects, including low-power wireless systems, sensors, and e-paper displays. I am available for PCB design and modification, electronics troubleshooting, prototype development, design review, testing, CAD/electromechanical integration, and technical documentation.

I help product developers and small businesses turn electronic concepts into practical, manufacturing-ready PCB designs. My capabilities include schematic capture, component selection, PCB layout, de... Read more

I help product developers and small businesses turn electronic concepts into practical, manufacturing-ready PCB designs. My capabilities include schematic capture, component selection, PCB layout, design review, and production-file preparation using KiCad, EasyEDA, and Fusion 360 Electronics. I specialise in ESP32 and microcontroller-based hardware, IoT devices, sensor interfaces, communication circuits, control systems, and power-supply integration. I have hands-on experience taking designs beyond the CAD stage, including ordering assembled PCBs, testing prototypes, troubleshooting hardware, and improving designs based on real test results. My services include: • Schematic capture and PCB layout • ESP32 and embedded-hardware design • PCB review and design improvement • Component selection and BOM preparation • Gerber, drill, pick-and-place, and assembly files • Design-for-manufacturing checks • Prototype troubleshooting and revision I prioritise clear communication, practical engineering decisions, component availability, manufacturability, and organised project documentation. If you have a product idea, existing schematic, or PCB that needs improvement, send me your requirements and I will assess the most effective path forward.

Need a PCB that passes DRC the first time and is ready to order from JLCPCB? I design 2- and 4-layer boards and write the ESP32/STM32 firmware that runs on them, so you work with one engineer from sch... Read more

Need a PCB that passes DRC the first time and is ready to order from JLCPCB? I design 2- and 4-layer boards and write the ESP32/STM32 firmware that runs on them, so you work with one engineer from schematic to working prototype. What I can do for you: - Schematic capture and PCB layout in KiCad, EasyEDA or Altium Designer (2 and 4 layers) - Custom symbols and footprints from datasheets - Manufacturing files: Gerber, drill, BOM and pick-and-place for JLCPCB or PCBWay - PCB review and DFM check before you order - Breadboard or Arduino prototype to a custom PCB - 3D board model (STEP) for your enclosure design - ESP32 and STM32 firmware in C/C++ (FreeRTOS, PlatformIO, STM32CubeIDE) - LTspice simulation of power and analog circuits Recent work: - Round 4-layer ESP32-S3 health smartwatch board (PPG, skin temperature, IMU, LiPo charging, haptics) with 0 DRC errors - Curved 4-layer wearable alarm-band PCB delivered to a client with Gerbers, BOM, pick-and-place, schematic PDF and a 3D enclosure model - USB-C PD multi-channel power board with STM32 control and current sensing - STM32 line-follower robot whose main PCB doubles as the chassis (Champion, Auto Grand Prix V6.0) I am a final-year EEE student at Shahjalal University of Science and Technology, an EasyEDA Official Certified Campus Ambassador and an IEEE EICT 2025 co-author. Send me your schematic, sketch or idea and I will tell you the layer count, timeline and cost.

Hello, Everyone! I am an embedded systems engineer, PCB designer, and firmware developer with over 10 years of professional experience. I provide complete, end-to-end solutions for a wide range of ele... Read more

Hello, Everyone! I am an embedded systems engineer, PCB designer, and firmware developer with over 10 years of professional experience. I provide complete, end-to-end solutions for a wide range of electronic device designs, supporting clients from initial concept and schematic design to PCB layout, prototyping, assembly, and full system testing. I have strong expertise in high-speed PCB design, including PCIe and DDR4 routing, as well as precise impedance matching for reliable performance at high frequencies. I also specialize in RF and antenna design for modern IoT devices, ensuring optimal signal integrity and system efficiency. In addition, I have deep experience in ultra-low power design, achieving microamp and sub-microamp current consumption for battery-operated and wearable systems. I specialize in firmware development for LTE-GPS-LoRa-BLE-based embedded systems (nRF52 series), including low-power optimization and high-precision sensor acquisition. My focus is on delivering robust, production-ready solutions with high reliability and performance. 🔥 Main Skills 👉Embedded Systems 👉Schematic Circuit Design(Low Power consumption Design) 👉Firmware Development(All Microcontrollers-STM32, TMS320, ESP32, FPGA, nRF52, Raspberry PI) 👉PCB Design(High speed signal routing, PCIe, DDR4, 18 multi-Layers Design, RF antenna Design,) using Altium Designer, KiCad, EasyEDA, Fusion 360(No problem in DFM-JLCPCB) 👉IoT with nRF52(BLE), LoRa(for example, SX1262), LTE(SIM card interface), GPS and other variety of sensors 🛠️Tools & Technologies: 👉 nRF5 SDK / nRF Connect SDK 👉SEGGER Embedded Studio + J-Link debugging 👉 C/C++ (bare-metal & RTOS) 👉 BLE GATT, LTE AT commanders, custom wireless protocols 👉SPI / I2C / UART / ADC integration 👉Low-noise measurement systems (nA level) 👉STM32CubeIDE, Cube MX, Keil, CCS, Arduino, ... 👉MQTT, Free RTOS, Zephyr RTOS 🚀 I can support your project from concept to production.

I am a Mechanical Engineer with a specialization in Mechatronics and Product Development, focused on turning ideas into functional prototypes and technology products. My work combines CAD design, Fus... Read more

I am a Mechanical Engineer with a specialization in Mechatronics and Product Development, focused on turning ideas into functional prototypes and technology products. My work combines CAD design, Fusion 360, 3D printing, electronics, embedded systems and software development. I enjoy working across disciplines, from designing functional mechanical parts and electronic enclosures to integrating ESP32 microcontrollers, sensors, batteries and connected applications. I have developed complete prototypes involving ESP32-based electronics, Hall and PVDF sensors, Bluetooth Low Energy (BLE), custom 3D-printed components and Flutter mobile applications. I have also designed functional CAD parts including electronic enclosures, threaded assemblies, modular systems and components optimized for FDM 3D printing. My main areas of work include: • Product development and prototyping • Fusion 360 and parametric CAD • Electronic enclosures and functional parts • Design for 3D printing / FDM • Mechanical fit, tolerances and assemblies • ESP32, sensors and embedded electronics • IoT and BLE-connected products • Flutter mobile and desktop applications I am particularly interested in projects where a client has an idea, sketch, electronic prototype or PCB and needs help transforming it into a practical, well-designed physical product.

I am an electrical professional and product developer from Switzerland with experience in electrical project planning, KNX building automation, and system integration. I have completed advanced profes... Read more

I am an electrical professional and product developer from Switzerland with experience in electrical project planning, KNX building automation, and system integration. I have completed advanced professional modules in electrical project management (Elektroprojektleiter). Alongside my professional electrical work, I design and build practical electromechanical systems and prototypes. My work combines Fusion 360 CAD, 3D printing and CNC, embedded electronics, ESP32, sensors, and stepper/servo systems. I focus on turning technical problems and ideas into practical, manufacturable solutions — from electrical planning and automation to mechanical design and functional prototypes. Core skills: Electrical planning · KNX · Building automation · Fusion 360 · CAD · 3D printing · CNC · ESP32 · Embedded systems · Electromechanical design · Prototyping

Mechatronics Engineer with hands-on experience in industrial machinery design, embedded systems integration, and FPGA hardware validation. Skilled at bridging physical mechanics and digital control, w... Read more

Mechatronics Engineer with hands-on experience in industrial machinery design, embedded systems integration, and FPGA hardware validation. Skilled at bridging physical mechanics and digital control, with practical expertise in reverse engineering, parametric CAD modeling (SolidWorks), sheet metal & weldment design, GD&T, and design automation. Professional highlights: reverse-engineered and redesigned ~15 industrial production machines using SolidWorks, built VBA/API macros that cut a manual engineering workflow from hours to minutes, and led multidisciplinary robotics projects end to end (mechanical design, embedded control, and field testing). Available for freelance CAD/mechanical design, technical drawings & GD&T documentation, reverse engineering, and embedded/FPGA prototyping projects. Clear communicator, reliable on deadlines, and comfortable working directly with clients in English, Arabic and Turkish.

I'm an electronics engineer in Ho Chi Minh City, Vietnam, finishing an M.Eng. in electronics. I design PCBs in KiCad and do 2D CAD drafting, and I work in writing: clear questions up front, written de... Read more

I'm an electronics engineer in Ho Chi Minh City, Vietnam, finishing an M.Eng. in electronics. I design PCBs in KiCad and do 2D CAD drafting, and I work in writing: clear questions up front, written design notes, and files you can open and check yourself. What I can show you: - A four-layer RP2040 board with USB-C and a 90 ohm USB differential pair, delivered as JLCPCB fabrication files (Gerbers, drill, BOM, CPL), with a 2x2 panel and a DFM check against the fab's published limits. - A two-channel phantom-powered microphone preamp in KiCad, with the schematic checked against the TI datasheet and hand-routed inputs. - An open-source Eagle board migrated to KiCad 10, with every net and copper segment compared against the original. - 2D drafting delivered as DXF, DWG and PDF: a dimensioned mechanical part drawing, a 1:50 floor plan, and a scanned 1921 drawing redrawn to its printed dimensions and overlaid on the original. Good fits: schematic capture and layout for small and medium digital/analog boards, Eagle-to-KiCad conversions, fab-ready output and DFM review, BOM cleanup, and converting sketches, scans or PDFs into clean CAD drawings. I'm also a computer-vision engineer (Python, OpenCV, camera calibration, embedded Linux), so boards that carry cameras or sensors are familiar ground. What I won't claim: I have not taken a product through mass production or certification (FCC/CE/UL), and I do not stamp architectural or structural drawings.

I am a Robotics Engineer, Systems Architect, and CTO of General de Maquinaria Tecnoindustrial, with over 15 years of experience in applied engineering, machinery development, and industrial automation... Read more

I am a Robotics Engineer, Systems Architect, and CTO of General de Maquinaria Tecnoindustrial, with over 15 years of experience in applied engineering, machinery development, and industrial automation. I hold the Certified SOLIDWORKS Professional (CSWP) certification in Mechanical Design. I also passed Workana’s Design Patterns skills assessment on September 18, 2026, with a score of 90%. I design and build functional systems that connect mechanical design, electronics, control, and software. My experience includes machinery developed from scratch and retrofits that modernize existing equipment with new controls, connectivity, and monitoring. I can help you with: • Mechanical design in SolidWorks: parts, mechanisms, assemblies, and custom machinery; structural analysis, material selection, fit tolerances, and technical drawings for manufacturing or 3D printing. • Product development: translating concepts, sketches, and functional requirements into CAD designs, considering ergonomics, assembly, manufacturing processes, and maintenance. • Industrial automation and CNC retrofits: PLCs, HMIs, control panels, motor drives, sensors, and modernization of obsolete equipment. • Embedded systems and software: firmware for ESP32, STM32, and Arduino; data acquisition, communications, telemetry, and interfaces for operation and diagnostics. My hands-on manufacturing and field experience informs every design decision, from component fit and fabrication methods to installation, troubleshooting, and serviceability. I work with Python, C++, and industrial communications, including Modbus RTU/TCP, Wi-Fi, and LoRa. Earlier field work included industrial electrical installations, power systems, substations, transformers, control panels, and maintenance, with participation in NAIM and AIFA infrastructure projects. At Universidad Autónoma Chapingo, I developed solutions for sensors, monitoring, data processing, predictive models, and agricultural process optimization. In an electrical-panel manufacturing line, I identified bottlenecks and improved the workflow, increasing output from approximately one to three completed panels per person per week without increasing headcount. I define requirements, scope, and deliverables before development and can contribute from initial diagnosis and concept design through detailed engineering, fabrication, programming, testing, and commissioning. Explore my portfolio to see machinery, mechanisms, and control systems I have designed and built, connecting engineering decisions with practical results.

Thank you for visiting my profile. I'm Engr. Muhammad Uzair, a hardware and firmware engineer with 6+ years of experience delivering production-ready electronic solutions. I specialize in: - Multil... Read more

Thank you for visiting my profile. I'm Engr. Muhammad Uzair, a hardware and firmware engineer with 6+ years of experience delivering production-ready electronic solutions. I specialize in: - Multilayer PCB design (up to 8 layers) — signal integrity, RF, IoT, and power electronics - Power electronics design — DC-DC and AC-DC conversion circuits - Firmware development for STM32, dsPIC, ESP32/ESP8266 with UART, SPI, I2C, CAN, USB, and MODBUS - RF circuit design — filters, antenna tuning, and wireless systems From schematic capture to Gerber files and working prototype — I manage the full design cycle with precision and on-time delivery. Let's bring your ideas to life!

Founder of Made By Robot (SHER Automations), a Tokyo-based engineering studio specializing in end-to-end hardware product development — from concept to factory-ready assembly. I design mechanical syst... Read more

Founder of Made By Robot (SHER Automations), a Tokyo-based engineering studio specializing in end-to-end hardware product development — from concept to factory-ready assembly. I design mechanical systems, embedded electronics, and automation solutions for clients across Japan and internationally. My work spans PCB layout and firmware, 3D-printed prototypes, robotic mechanisms, and IoT devices. Past projects include a 6-DOF robotic arm, solar tracking robot, mechanical gripper, autonomous lawn mowing robot, and a 360° video booth — all built in-house with full-stack control from hardware to software. I work in C++ and Python on the software side, and handle CAD, PCB design, and 3D printing for physical deliverables. If you need a reliable engineer who can own the full product pipeline, I'm your person.

Hardware Engineering Supervisor with end‑to‑end consumer smart hardware development background. I specialize in smart pet and aquarium electronic product development, covering solution assessment, sch... Read more

Hardware Engineering Supervisor with end‑to‑end consumer smart hardware development background. I specialize in smart pet and aquarium electronic product development, covering solution assessment, schematic & PCB review, component selection, BOM cost optimization, DFM, hardware‑mechanical co‑design, prototype debugging, enclosure integration and mass‑production troubleshooting. I am experienced in power circuit design, EMC debugging, signal integrity, reliability validation and alternative component evaluation. I closely collaborate with firmware, mechanical and supply‑chain teams to control project risks, reduce board revisions and deliver stable, production‑ready hardware. I provide full‑chain hardware consulting for overseas startups and product teams, covering hardware‑structure matching and complete whole‑machine product implementation.

I am an Electronics Engineer specializing in Embedded Systems, PCB Design, Firmware Development, FPGA Design, and MATLAB/Simulink. I help startups, companies, and researchers transform ideas into reli... Read more

I am an Electronics Engineer specializing in Embedded Systems, PCB Design, Firmware Development, FPGA Design, and MATLAB/Simulink. I help startups, companies, and researchers transform ideas into reliable electronic products from concept to production. My expertise includes schematic design, multilayer PCB layout, embedded firmware development, circuit simulation, IoT systems, sensor interfacing, and prototype development. I work with ESP32, STM32, Arduino, AVR, FPGA (Verilog/VHDL), MATLAB, KiCad, Altium Designer, EasyEDA, Proteus, and Multisim. I can assist with: • PCB Design & Layout • Schematic Design • Embedded C Programming • ESP32 & STM32 Firmware • FPGA Development • MATLAB & Simulink • Circuit Simulation • IoT Product Development • Hardware Debugging • Prototype Development I focus on delivering production-ready designs with clear communication, attention to detail, and reliable technical support throughout every project.

Hello Everyone! I help businesses and innovators design and develop reliable IoT and Embedded Systems solutions that automate processes, enhance efficiency, and bring smart devices to life. As an E... Read more

Hello Everyone! I help businesses and innovators design and develop reliable IoT and Embedded Systems solutions that automate processes, enhance efficiency, and bring smart devices to life. As an Electrical Engineer specializing in Embedded Systems, IoT, and Microcontroller Programming, I provide end-to-end hardware and firmware solutions tailored to your project’s needs. I turn complex electronics concepts into practical, scalable, and robust devices. I have hands-on experience with microcontrollers such as ESP32, STM32, and Arduino. My expertise covers sensor integration, real-time embedded systems, and seamless hardware–software communication. I also implement communication protocols like UART, SPI, I2C, and MODBUS to ensure reliable and efficient data exchange across your devices. In addition to electronics design, I also create **2D and 3D designs using AutoCAD** for PCB enclosures, product housings, and mechanical components—helping you visualize and build complete, ready-to-manufacture solutions. **My core skills include:** • Embedded C/C++ Programming • ESP32, STM32, Arduino Development • Sensor Integration and Data Acquisition • IoT System Development • PCB Prototyping and Hardware Debugging • Serial Communication Protocols (UART, SPI, I2C, MODBUS) • AutoCAD 2D & 3D Design (PCB Enclosures & Mechanical Parts) I focus on delivering clean, efficient, and reliable solutions that meet your exact requirements. Whether it’s building custom IoT devices, automating processes, designing enclosures, or developing smart electronics, I help you bring your ideas to reality. Let’s collaborate to create systems that perform flawlessly and add real value to your project.

Electronics & Embedded Systems Engineer specializing in PCB design, embedded firmware, and reverse engineering. I take hardware projects from schematic and PCB layout to firmware, prototyping, and tes... Read more

Electronics & Embedded Systems Engineer specializing in PCB design, embedded firmware, and reverse engineering. I take hardware projects from schematic and PCB layout to firmware, prototyping, and testing. Tools: Altium Designer, Eagle, STM32/AVR and other MCUs, Autodesk Inventor. Experienced in industrial control, RF, SMPS, and custom embedded systems. Available 48 hrs/week. Let’s discuss your project.

I help clients with PCB design, PCB revisions, manufacturing files, and embedded systems development. I work with KiCad, Altium Designer, ESP32, STM32, and Arduino on practical electronics projects.... Read more

I help clients with PCB design, PCB revisions, manufacturing files, and embedded systems development. I work with KiCad, Altium Designer, ESP32, STM32, and Arduino on practical electronics projects. My services include schematic and PCB design, small PCB revisions, Gerber and Drill file preparation, BOM and Pick-and-Place files, and simple embedded firmware development in C/C++. I have hands-on experience with electronic product development, manufacturing processes, troubleshooting, testing, and quality control. I focus on clearly defined scope, organized deliverables, and practical communication. Before starting a project, I review the requirements carefully and confirm the deliverables, timeline, and project scope.

I am a software engineer specializing in IoT, embedded systems, and .NET-based backend development. I work on both: ✔ Vehicle & telemetry systems (CANbus, IoT, real-time data) ✔ Web & backend applica... Read more

I am a software engineer specializing in IoT, embedded systems, and .NET-based backend development. I work on both: ✔ Vehicle & telemetry systems (CANbus, IoT, real-time data) ✔ Web & backend applications (.NET, APIs, dashboards) I can help you with: - .NET Web API development - Real-time systems (SignalR, live dashboards) - IoT data pipelines (device → cloud → UI) - CANbus data processing and telemetry systems - Mobile-integrated backend systems I have real-world experience in electric vehicle projects, building telemetry and monitoring systems from hardware to cloud. Tech stack: C#, .NET, ASP.NET Core, React, Python, Azure, SignalR, CANbus, Linux I combine hardware-level understanding with modern software development — which allows me to build complete end-to-end systems.

Advanced Mechanical Engineering student (Mechatronics) with hands-on experience designing industrial control and automation systems. I recently led the conceptual engineering design for an automated f... Read more

Advanced Mechanical Engineering student (Mechatronics) with hands-on experience designing industrial control and automation systems. I recently led the conceptual engineering design for an automated firefighting-foam production process, including a full Purdue-model (ISA-95) control architecture with PLC, VFDs, and SCADA — reducing process deviation to under ±5% and removing dependency on manual operator judgment. My core strength is translating a mechanical or process problem into a complete, working system: from 3D modeling and technical drawings (CATIA, NX, SolidWorks) to control logic and simulation (MATLAB, EcoStruxure). Currently finishing my capstone project, an electric wheelchair with an active rowing mechanism. Available for CAD modeling, technical documentation, and automation/control design work.

I am an Electrical & Electronics Engineer with hands-on experience in embedded systems, firmware development, electronics, and engineering design. I work with STM32, ESP32, C, Python, Verilog, Altium... Read more

I am an Electrical & Electronics Engineer with hands-on experience in embedded systems, firmware development, electronics, and engineering design. I work with STM32, ESP32, C, Python, Verilog, Altium Designer, and AutoCAD. My projects include STM32-based embedded systems, ESP32 IoT applications, FPGA/Verilog designs, electronic circuit and PCB development, Python-based data processing, and electrical CAD drawings. I also have experience with communication interfaces such as UART, SPI, and I2C, as well as network traffic analysis and software development using Python and Java. I graduated as the top-ranked student in my department with a 3.63/4.00 GPA and High Honor distinction. I focus on clear communication, reliable delivery, and practical engineering solutions. I can help with embedded firmware, Python scripts and automation, electronic circuit design, Altium projects, Verilog modules/testbenches, IoT prototypes, and AutoCAD electrical drawings.

Senior Engineering Consultant with 25+ years of experience specializing in the design and development of microprocessor-based M2M and IoT products. I hold an M.S. in Control Engineering from Kuwait Un... Read more

Senior Engineering Consultant with 25+ years of experience specializing in the design and development of microprocessor-based M2M and IoT products. I hold an M.S. in Control Engineering from Kuwait University and lead MazikUSA, a specialized firm focused on Smart City infrastructure, low-power electronic circuits, and advanced hardware instrumentation. My expertise includes taking complex industrial requirements from theoretical control models to high-fidelity PCB layouts and functional prototypes.

Mechatronics Engineering student (4th year, Bowen University, CGPA 4.49/5.00) who designs electronic circuits and mechanical CAD as one system rather than two jobs. I take a requirement and carry it t... Read more

Mechatronics Engineering student (4th year, Bowen University, CGPA 4.49/5.00) who designs electronic circuits and mechanical CAD as one system rather than two jobs. I take a requirement and carry it through schematic, simulation, PCB layout, and manufacturable 3D design with clear engineering documentation at every step. Electronics: analog and digital circuit design, microcontroller-based circuits (Arduino/AVR family), sensor circuits and signal conditioning, power circuits and regulation. I simulate before I build: Proteus (circuit + embedded simulation), Multisim and MATLAB/Simulink, and I validate control behavior in simulation before committing to hardware. I have produced complete schematics and PCB layouts, including component rating and thermal checks (e.g., a regulated LM317 bench supply validated to ±2% under load). CAD & mechanical: SolidWorks part and assembly modelling, engineering drawings, and stress/vibration simulation. I designed and validated a battery holder in CAD with stress and vibration simulation under operational loading, and I ran end-to-end 3D printing production workflows (Cura slicing, nozzle/bed/feed settings) for flying hardware. Embedded & control: closed-loop PID control, sensor integration, embedded C/C++/Arduino, and SCADA (I interned at the Transmission Company of Nigeria National Control Centre, monitoring national grid telemetry and doing disturbance root-cause analysis). I have MATLAB/Simulink OnRamp certificates. I am honest about scope: I state clearly what I can deliver directly and what needs a partner, so timelines don't slip. Available for remote, project-based work worldwide.

I design electronic circuits, PCBs, and embedded systems for prototyping and product development. My experience includes schematic capture, PCB layout, circuit simulation, and digital hardware design... Read more

I design electronic circuits, PCBs, and embedded systems for prototyping and product development. My experience includes schematic capture, PCB layout, circuit simulation, and digital hardware design using modern engineering tools. I assist clients with transforming ideas into practical electronic designs, from schematic capture to PCB layout and simulation. My areas of expertise include: • PCB Design (KiCad) • Schematic Capture • Multi-layer PCB Layout • LTspice Circuit Simulation • Analog & Digital Circuit Design • ESP32 & AVR-based Embedded Systems • Verilog RTL Design • Basic FPGA Development • Component Selection & Bill of Materials (BOM) • Gerber File Generation • PCB Manufacturing Preparation I emphasize clear communication, organized documentation, and timely project delivery. I focus on clean PCB layouts, manufacturable designs, clear documentation, and prompt communication throughout each project. I look forward to collaborating on electronics and embedded system projects.

I am a Mechatronics Engineering student with a strong interest in mechanical design, CAD modeling, DIY engineering projects, and electromechanical systems. I use Autodesk Fusion 360 to develop practi... Read more

I am a Mechatronics Engineering student with a strong interest in mechanical design, CAD modeling, DIY engineering projects, and electromechanical systems. I use Autodesk Fusion 360 to develop practical 3D models, mechanical components, assemblies, and design concepts. My engineering background allows me to approach projects from multiple perspectives, including mechanical structure, load distribution, motion systems, electronics, and control. I am particularly interested in projects that combine mechanical design with electronics and automation. My areas of interest and experience include: 3D CAD modeling and mechanical design using Fusion 360 DIY product and prototype development Gear systems and mechanical transmission mechanisms Structural reinforcement and mechanical frame design Load distribution and practical structural considerations Hydraulic system concepts and mechanisms Electrical and electromechanical systems Control systems and automation Remote-control systems Microcontroller-based projects ESP32-based control and IoT applications Integration of sensors, motors, actuators, and mechanical components Designing parts and assemblies for prototyping and fabrication I enjoy solving practical engineering problems and transforming ideas, sketches, and concepts into functional designs. My approach is based on understanding how the complete system works—not only how individual parts look. This allows me to consider mechanical movement, forces, structural support, electronics, control, and component integration during the design process. I am continuously developing my engineering skills through university studies, personal projects, and hands-on DIY experimentation. I am open to working on prototypes, mechanical mechanisms, automation projects, custom machines, robotic systems, and electromechanical product concepts. If you have an idea that needs to be transformed into a practical CAD design or engineering concept, I would be happy to discuss your project.

Computer Engineering and embedded systems developer focused on CubeSat and IoT systems. I design and integrate hardware + firmware end-to-end, from requirements and architecture to testing and deploym... Read more

Computer Engineering and embedded systems developer focused on CubeSat and IoT systems. I design and integrate hardware + firmware end-to-end, from requirements and architecture to testing and deployment. Strong in C/C++ and real-time firmware on ESP32/STM32/AVR, plus reliable communication links and telemetry pipelines. I also build backend services in Python, integrating MQTT and databases for logging, monitoring, and control dashboards.

I am an Electronics and Embedded Systems Engineer with strong experience in microcontrollers, PCB design, and electronic system prototyping. I specialize in developing embedded systems using ESP32 an... Read more

I am an Electronics and Embedded Systems Engineer with strong experience in microcontrollers, PCB design, and electronic system prototyping. I specialize in developing embedded systems using ESP32 and Arduino, as well as designing and simulating electronic circuits for real-world applications. My experience includes robotics systems, sensor integration, power electronics simulation, and PCB design. I have worked on projects involving motor control, ultrasonic sensors, IMU sensors (MPU6050), and real-time embedded programming. Technical Skills: • Embedded Systems Development (ESP32 / Arduino) • PCB Design (KiCad / Altium) • Circuit Design and Debugging • Power Electronics Simulation (PLECS / LTspice) • MATLAB / Simulink Modelling • Sensor Integration (Ultrasonic, IMU, IR Sensors) • Control Systems (PID) Example Projects: • Autonomous robot using ESP32 with ultrasonic obstacle avoidance and PID line-following • PCB design and hardware debugging for embedded systems • Power electronics simulation and analysis • Sensor-based control systems I focus on delivering reliable, well-documented solutions and clear communication throughout the project. If you need help with embedded systems, electronics design, or simulations, feel free to contact me.

Mechatronics with a strong foundation in embedded systems, digital electronics, and mechanical design. Skilled in developing microcontroller-based applications and designing components using SolidWork... Read more

Mechatronics with a strong foundation in embedded systems, digital electronics, and mechanical design. Skilled in developing microcontroller-based applications and designing components using SolidWorks.

IoT & Embedded Systems Design Engineer specialized in motion control, stepper motors, and embedded programming. I develop smart, reliable prototypes focused on real-world performance and clean enginee... Read more

IoT & Embedded Systems Design Engineer specialized in motion control, stepper motors, and embedded programming. I develop smart, reliable prototypes focused on real-world performance and clean engineering.