Hire the best CST Studio experts for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

Over 28+ years of experience in the creative world. I am a product designer, 3D modeler, brand identity & branding specialist, corporate identity creator & and do as well corporate profiles. Currently... Read more

Over 28+ years of experience in the creative world. I am a product designer, 3D modeler, brand identity & branding specialist, corporate identity creator & and do as well corporate profiles. Currently, I own a creative agency in Lebanon called "web and media" Portfolio on Behance: https://www.behance.net/webandmedialb

Hi ! I'm an Electronics Design Engineer holding a Master's degree in Electrical Engineering with +2 years of experience. I had some experience in designing PCBs and RF/microwave and millimeter-wave c... Read more

Hi ! I'm an Electronics Design Engineer holding a Master's degree in Electrical Engineering with +2 years of experience. I had some experience in designing PCBs and RF/microwave and millimeter-wave components (filters, antennas, diplexers...). Most of my experience comes using the following software: Kicad, EasyEDA, Altium, ADS, CST, and HFSS. --------- Recently, I have worked on the design of an RF transmitter (PCB board) for RFID reader; The broad consist of: Antenna; Bandpass Filter; Power Amplifier; Oscillator... I also participated in working on a development of new charger. I have experience in using measurement tools for RF components such as VNA and oscilloscope. I have published three book chapters and two articles in international journals. - Programming: C++, VHDL, Java, MATLAB, Familiar with Python.

Antenna designer -Circuit Design -PCB Designer -ARDUINO IDE 3D Modelling AutoCAD -javascript -python -mobile app develpment (android , IOS) -solidworks - CST Microwave Studio -ANSYS HFSS -Sonar equip... Read more

Antenna designer -Circuit Design -PCB Designer -ARDUINO IDE 3D Modelling AutoCAD -javascript -python -mobile app develpment (android , IOS) -solidworks - CST Microwave Studio -ANSYS HFSS -Sonar equipment Operation and maintenance -Radar operator and maintenance maintenance . -MATLAB , Simulink , GUI -Multisim, Kicad -C++C++ -Logo Design -Adobe Photoshop -Radar System Engineer and underwater acoustic -Microwave

I can create the mathematical model of mechanical systems, including fluid flow, electromagnetic fields, and mechanical elements, using MATLAB. After modeling, I will optimize the system and plan the... Read more

I can create the mathematical model of mechanical systems, including fluid flow, electromagnetic fields, and mechanical elements, using MATLAB. After modeling, I will optimize the system and plan the general architecture of the machine. Next, I will generate the ideal model(parameterized) in computer simulation tools such as ANSYS, COMSOL, and MSC Adams, and then simulate and optimize them. Finally, I will design the complete machine using CAD software like SolidWorks and AutoCAD. I have solid experience with all of these tools and processes. Using this workflow, I have designed various projects, including mechanical gyroscopes(whole design), HVAC systems(for building and vehicles), graders(for corn and gold), and packaging machines. Throughout these tasks, I have gained a deep understanding of various CAD, CAM, CAE tools, as well as MATLAB.

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

Greetings, As an Engineer with a deep passion for 3D modeling and CAD design, I am dedicated to delivering precise and innovative results. What You Can Expect: 1. Flawless Execution of Your Vision:... Read more

Greetings, As an Engineer with a deep passion for 3D modeling and CAD design, I am dedicated to delivering precise and innovative results. What You Can Expect: 1. Flawless Execution of Your Vision: - Complex engineering designs realized with precision, meeting functional and aesthetic goals. 2. Optimized for Real-World Applications: - Models ready for 3D printing, CNC machining, and manufacturing processes. - Seamlessly integrated designs for robotics, mechanical components, and industrial systems. 3. Efficient and Functional Products: - Practical solutions for industrial equipment, furniture, and custom machinery. Proven Expertise in Delivering Results: - Engineering Excellence: Designs that improve product performance and solve engineering challenges. - End-to-End Solutions: From concept sketches to 3D models and detailed 2D drafts, your ideas are realized with unmatched accuracy. - Tailored Solutions: Every design is optimized for its purpose, ensuring it fits your specific requirements. I use advanced tools like SolidWorks, Fusion 360, and AutoCAD to achieve precision and efficiency in every project. Let’s bring your vision to life and create designs that work flawlessly in the real world. 🌟🚀 Best regards, Abed

We work with passion and We love what we do. We will complete your work with our given deadline and maintaining the work quality. We’re offering: » Architecture planning, 3D Visualization & Interior/... Read more

We work with passion and We love what we do. We will complete your work with our given deadline and maintaining the work quality. We’re offering: » Architecture planning, 3D Visualization & Interior/Exterior Designing: » Architectural Design service , MEP work » BOQ for both interior and exterior » Autocad Floor plan, Elevation, section, and City Permit Drawings & Drafting. » Construction drawings, Building permit, Landscaping » 3D Architectural Visualizations - Exterior / Interior » 3D Modeling & Rendering, 3D Floorplan » Furniture Design and 3D Visualization » Walkthrough or Flythrough 3D Animation. » 3D modelling for 3d printing

- I am a mechanical engineering undergraduate and have a passion for Mechanical and Automotive Engineering. - Possessing a solid foundation in 3D designing and analysis, PowerPoint, team management a... Read more

- I am a mechanical engineering undergraduate and have a passion for Mechanical and Automotive Engineering. - Possessing a solid foundation in 3D designing and analysis, PowerPoint, team management and basics of business management and finances, I am eager to apply my theoretical expertise to practical challenges and make a positive impact in the professional world. - Demonstrating excellent communication, analytical, and problem-solving skills, I have honed my ability to quickly learn new concepts and adapt to dynamic environments. - A resourceful and detail-oriented individual, I am adept at working both independently and collaboratively, fostering productive relationships with diverse teams. -With a proactive attitude, a strong work ethic, and a commitment to continuous growth, I am poised to contribute my talents and drive to an organization ready to invest in a motivated and enthusiastic entry-level professional.

Hi, I am a 3D artist who is newer to the industry and I am looking for some small projects to work on outside of my regular (Monday-Friday) job hours.I have been working as a 3D scanning assistant fo... Read more

Hi, I am a 3D artist who is newer to the industry and I am looking for some small projects to work on outside of my regular (Monday-Friday) job hours.I have been working as a 3D scanning assistant for the past year. My tasks include scanning products through photogrammetry and helping to polish the 3D models before they are uploaded to my work’s website. I graduated with a diploma in digital animation in 2018 and I have particular strengths in modeling and rigging. I am a very hard worker, I’m honest and I love what I do. I would be more than happy to help you with your next project!

I'm a second year aerospace engineering student at TU Delft faculty, through different group and personnel project i have been able to slowly gain experience in CAD. My main project has been the desi... Read more

I'm a second year aerospace engineering student at TU Delft faculty, through different group and personnel project i have been able to slowly gain experience in CAD. My main project has been the design and full modelling of a space orbiter. With a creative open-mind, i strive to continue improving in my work.

I am Automobile engineer and having good designing experience. I can design parts, components for mechanical and automobile systems. Software skills i. MS Office software – MS Word, MS Excel & Powe... Read more

I am Automobile engineer and having good designing experience. I can design parts, components for mechanical and automobile systems. Software skills i. MS Office software – MS Word, MS Excel & PowerPoint ii. CAD software – CREO, SolidWorks iii. Simulation Software – ANSYS & MATLAB - SIMULINK

I am an architect having good architect, interior designer and drafting team. I have a 8 years of experience and start my firm from last 3 year. We are a quality and creativity seekers. We enjoy our w... Read more

I am an architect having good architect, interior designer and drafting team. I have a 8 years of experience and start my firm from last 3 year. We are a quality and creativity seekers. We enjoy our work with client happiness as well.

I am a Mechanical & Design Engineer with a passion for creative & Innovative design. I have 10 years of experience as a designer/engineer in DUBAI, currently working full time for running my business... Read more

I am a Mechanical & Design Engineer with a passion for creative & Innovative design. I have 10 years of experience as a designer/engineer in DUBAI, currently working full time for running my business managing a team of engineers and designers. We are Mostly covering the Gulf & US Companies currently & providing them the best quality assurance of work. I actively participate in every project we take on as my true passion is in design.I have a background in Mechanical Engineering degree as well as master Diploma in Design and try to apply Creativity principles into my designs. As a Designer I am expert l in most aspects of design and am highly proficient in 3d modeling and CAD design. I try to be realistic with my timelines and bidding projects. When I commit to do a project I am make sure that it is completed on time. I will not finish any assignment until the client is 100% satisfied. As an engineer I have expertise in: Product Design & Industrial Design, Interior Design, Decorative Design, 3D Design, Modelling & Rendering, Furniture Design, Web design & Development Including Graphic Design & Automotives Design.

Creation is both complex and exciting when confronted to "Real Life Applications". This is a second life career based on a longtime love and passion for computer based design and creations.

Creation is both complex and exciting when confronted to "Real Life Applications". This is a second life career based on a longtime love and passion for computer based design and creations.

2d drafting AutoCAD. 3d modelling SketchUp and 3d max rendering using v ray 6 photoshop shape design Catia v5

2d drafting AutoCAD. 3d modelling SketchUp and 3d max rendering using v ray 6 photoshop shape design Catia v5

I'm a Mechanical Engineer with 20+ years of experience in the energy industry with emphasis in the oil and gas sector. Experienced with the management of product portfolios, commercial services, proje... Read more

I'm a Mechanical Engineer with 20+ years of experience in the energy industry with emphasis in the oil and gas sector. Experienced with the management of product portfolios, commercial services, project management and field and engineering operations. As part of global operations of the Engineering, Manufacturing & Sustaining division of SLB (former SCHLUMBERGER OILFIELD SERVICES) gained experience with CAD on several worldwide product lifecycle projects supported from Aberdeen and Pune, from fixing NPD projects, deploying custom JIGs tools for problem solving during field operations, to creating customized products for specific client needs.

Being from BAJA SAE background I have in-hand experience of tackling problems proficiently. I successfully design fixed ratio gearbox for 2 seasons. lead the team as manufacturing head( jigs and fixtu... Read more

Being from BAJA SAE background I have in-hand experience of tackling problems proficiently. I successfully design fixed ratio gearbox for 2 seasons. lead the team as manufacturing head( jigs and fixture design ). I also developed a cooling system for the Transmission system. have keen interests in motorcycle dynamics and as a part of my final year project, I have engineered a motorcycle frame( on CAD) for an electric powertrain. I have experience working on freelance projects( from baking molds to medical equipment) with short timelines and high skill requirements.

We are a civil engineering studio "Krasteff and Aykoff Engineering" Ltd. We are situated in Bulgaria and we are engaged in the design of residential and administrative buildings. Our specialty is re... Read more

We are a civil engineering studio "Krasteff and Aykoff Engineering" Ltd. We are situated in Bulgaria and we are engaged in the design of residential and administrative buildings. Our specialty is reinforced concrete structures. The team consists of: Dipl. Eng. Todor Krastev - 6 years as a civil engineer Dipl. Eng. Kristian Aykov - 5 years as a civil engineer We develop our projects using BIM modeling in REVIT environment .This helps us with project coordination, reduces the risk of errors, eases the workflow and reduces the amount of work. We can offer you: -FULL 3D structural model of the building -Reinforcement of structural elements in REVIT - slabs,stairs,wall and columns -Structural shop drawings using both Revit and AutoCAD -Full material take off - based on the model -Statics and Dynamics using ETABS and ROBOT STRUCTURAL ANALYSIS Our company also offers consulting services in BIM design for structural engineers. We excel at using Dynamo based scripts to automate the process of the structural engineer and REVIT design.You can see my linkedin page for more references about dynamo scripts. More information on the style of work and some of the projects we have worked on through the years can be found in our portfolio: https://www.slideshare.net/KristianAykov/krasteff-aykoff-engineering

Jad graduated from Temple University and The University of Dayton. Jad’s career in construction began by starting a home building company Jad’s Energy Efficient Homes. Which built and designed cust... Read more

Jad graduated from Temple University and The University of Dayton. Jad’s career in construction began by starting a home building company Jad’s Energy Efficient Homes. Which built and designed custom homes for 35 years until founding Jad’s Home Design & and Drafting Service. His hands on experience & knowledge has been of great value in the success of the business. Jad resides in Hanover with his wife and has two daughters and 6 grandchildren. Jad has help with projects for Habitat for Humanity. In his spare time Jad enjoys being a Ham radio operator, also electronics and computers. He also likes camping and spending time with family and friends.

Hi there! I’m Himani, an Architect and Interior Designer dedicated to transforming everyday spaces into modern, functional, and visually stunning environments. I specialize in creating residential, c... Read more

Hi there! I’m Himani, an Architect and Interior Designer dedicated to transforming everyday spaces into modern, functional, and visually stunning environments. I specialize in creating residential, commercial, and office interiors that balance beauty and practicality. From concept to execution, I ensure every design reflects your personality, enhances usability, and meets your budget. What I Can Do for You: Interior Design: Residential, Commercial & Office Spaces Architectural Design: Floor Plans, Elevations & Layouts 3D Visualization: Realistic Renders that bring your ideas to life Construction Drawings: Detailed and precise for seamless execution Renovations & Makeovers: Reimagine existing spaces with modern aesthetics 🔸 Why Clients Choose Me: ✅ Creative yet practical design approach ✅ Clear communication and timely delivery ✅ Collaborative process ensuring your satisfaction 🔸 Design Tools: 3ds Max | AutoCAD | SketchUp | Photoshop | V-ray Let’s collaborate to visualize your ideas and create spaces that truly inspire.

I can make 2d autocad drawings from rough sketch provided. I can make 3d models using revit architecture from the autocad drawings. I can deliver the projects on time with full satisfaction.

I can make 2d autocad drawings from rough sketch provided. I can make 3d models using revit architecture from the autocad drawings. I can deliver the projects on time with full satisfaction.

I am a mechanical engineer, I have 3 years experience in Automation Robotic Mechanical Design and manufacturing.

I am a mechanical engineer, I have 3 years experience in Automation Robotic Mechanical Design and manufacturing.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.