Hire the best Bolted Connections experts for your company

• 16 Years of full-time, professional experience as a mechanical engineer. • Proficiency with Onshape, SolidWorks, Creo, and a variety of other 3D CAD programs (Onshape preferred). • Clarkson Universi... Read more

• 16 Years of full-time, professional experience as a mechanical engineer. • Proficiency with Onshape, SolidWorks, Creo, and a variety of other 3D CAD programs (Onshape preferred). • Clarkson University graduate (B.S. Mechanical Engineering, 2009) • Reside in NY State.

I've been interested in structural strength since I was a child, later choosing to become a mechanical engineer, learning how to achieve high-quality products with optimized shape and light weight. I... Read more

I've been interested in structural strength since I was a child, later choosing to become a mechanical engineer, learning how to achieve high-quality products with optimized shape and light weight. I have a lot of experience from many different areas of engineering, like equipment for transformers (tap-changers and bushings), power towers and masts, machines, mechanisms, cranes and much more. As could be seen from the numbers of softwares I have used, I am a very quick learner which also means that I most often can understand a project or problem and start my work on it very quick. But I always try to have an open mind, knowing that good quality often comes from assessing several alternativs before choosing, An important goal is to give my customers early indications when finding room for improvement of a product/project. Many have been astonished by the speed of my work, but quality is more important for me than speed. Of course, high speed often means lower costs in the end.

I have over a decade of experience in mechanical design & tooling engineering for aerospace and induction motor manufacturing. I own my projects from concept through design, modeling, drafting, struc... Read more

I have over a decade of experience in mechanical design & tooling engineering for aerospace and induction motor manufacturing. I own my projects from concept through design, modeling, drafting, structural analysis, and release. These designs incorporate Design for Manufacture and Assembly (DFMA) best practices in order to achieve not just optimized performance, but producibility as well. My strengths include 3D modeling and 2D drafting, extensive GD&T experience and training, structural analysis, FEA in Ansys, part renderings, and interdisciplinary collaboration.

As a structural engineer, I have worked on many projects in the US over 8 years and have gained experience in obtaining building permits in multiple states. I have connections with many US professiona... Read more

As a structural engineer, I have worked on many projects in the US over 8 years and have gained experience in obtaining building permits in multiple states. I have connections with many US professional engineers and licensed architects and work as their team manager. Not only have I mastered the US building codes, I also find joy in solving challenging problems that get approve from building permits. Here are the states in the US where I can provide licensed architect and professional engineer reviews and stamps for building permits: Arkansas, California, Colorado, Connecticut, Delaware, Georgia, Hawaii, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New jersey, New York, Ohio, Oregon, Pennsylvania, Rhode Island, Utah, Virginia, Washington I have also worked with professional engineers in Canada and given them many jobs. The provinces where I can provide reviews and stamps of professional engineers in Canada are as follows: Alberta, British Columbia, Manitoba, Ontario, Quebec I will provide the following documents for building permit: ? 1. Cover Sheet Project information (address, parcel number, owner, designer) Sheet index Code references (CBC, zoning codes, etc.) Project summary (use, occupancy, construction type, etc.) ? 2. Architectural Plans Site plan (property lines, setbacks, driveway, structures) Floor plans (existing and proposed) Roof plan Exterior elevations Building sections Door/window schedules Interior layouts (for kitchens, baths, etc.) ? 3. Structural Plans Foundation plan Framing plans (floor/roof) Structural details and sections Structural notes and specifications Structural calculations (stamped by a licensed engineer) ? 4. Energy Compliance Documentation (Title 24 California only) Title 24 energy forms and reports CF1R documents Envelope, lighting, and mechanical compliance details ? 5. MEP Plans (if required) Mechanical (HVAC layout, equipment schedules) Electrical (lighting, receptacles, panel schedules) Plumbing (fixture layout, pipe sizing, riser diagrams) ? 6. Supporting Documents Soils/geotechnical report (if required) Survey/topo map (for new construction or additions) Truss calculations (if using prefabricated trusses) Fire sprinkler plans (if applicable) Green building checklist (e.g., CALGreen) Special inspection form (if needed) My skills: I have experience with USA Design codes for structural design and working with the help structure analysis software like Risa 3d, Ram structure, Robot structure analysis, Revit Structure, Tekla Tedds. I am confident that my background in Structural design and my passion make me a strong candidate. Thank you for visiting my profile!

have overall 15 Years’ experience in mechanical & structural design and the manufacturing industry including 8 years of experience in product development comprising of hydraulics, geared motors & elec... Read more

have overall 15 Years’ experience in mechanical & structural design and the manufacturing industry including 8 years of experience in product development comprising of hydraulics, geared motors & electronics for automation.

Chartered structural engineer from the UK with strong knowledge of reinforced concrete, masonry, and steel design. I graduated from the University of Leeds in 2015 with a masters in civil and structur... Read more

Chartered structural engineer from the UK with strong knowledge of reinforced concrete, masonry, and steel design. I graduated from the University of Leeds in 2015 with a masters in civil and structural engineering. Since then I have designed and led projects up to £200 million in value. Including N08, East Village and Greenwich Peninsula in London.

The company was started in 1996 by BP Nel, a graduate mechanical engineer. We have since complete more than a 1000 projects in a very diverse field of design for manufacture. Our experience are wit... Read more

The company was started in 1996 by BP Nel, a graduate mechanical engineer. We have since complete more than a 1000 projects in a very diverse field of design for manufacture. Our experience are within Product and Tool Design for plastic injection molding, vacuum forming, rotational molding, pressure die casting and blow molding. We also have extensive experience in design for metal fabrication, mechanisms, gears, cams, shafts, springs and bolted connections. We optimize machines and products with Finite Element Analysis and Generative Design. We use LEGAL software ONLY: Autodesk Inventor Professional and Fusion 360 Design software. We work with clients all over the world and communicate using ▒▒▒▒▒▒▒▒, ▒▒▒▒▒ and Zoom.

I'm John - Amateur photographer and musician, professional Draughstman and 3D Detailer. I studied Industrial Design, and from that point foward my career has been all around mechanical steel constr... Read more

I'm John - Amateur photographer and musician, professional Draughstman and 3D Detailer. I studied Industrial Design, and from that point foward my career has been all around mechanical steel construction and industrial maintenance - In +12 years I was a Mechanical fitter, a CNC programmer, a Draftsman, a 3D Detailer, then a Project Manager, and now a Technical dpt. Manager for a Multinational corporation. I've participated in various imposing jobs for well known clients over the years, dispersed all around the globe; from developing belt conveyor solutions for Portugal's cement industries, to detailing crystal boilers for France; from designing liquid waste burn installations in Egypt, to modeling dust filters structures to Mozambique. Im good and fast at working with Tekla and Inventor, and better and faster working with AutoCad. My area of expertise is structural steel 3D design and detailing, and due to a better cost/effective management of my resources and your satisfaction, that is exclusively what I'm purposing to sell in here. I can provide you with: - 3D models (.dwg or .step files); - Basic renderings of 3D models (.jpg); - 2D shop drawings - general/assembly/parts (.dwg or .pdf); - CNC files for cnc cuting; - Listings for materials, parts, bolted connections, weights, etc (.txt or .xls). Lets get work done!

I provide high-precision structural detailing services to bridge the gap between design and construction. Whether working from architectural blueprints or hand-drawn sketches, I deliver: 1) Reinforce... Read more

I provide high-precision structural detailing services to bridge the gap between design and construction. Whether working from architectural blueprints or hand-drawn sketches, I deliver: 1) Reinforcement Solutions: Detailed formwork and rebar plans featuring optimized Bar Bending Schedules (BBS) to minimize material waste and streamline on-site fabrication. 2) Multi-Material Connections: Custom design and detailing for structural steel joints (welded/bolted) and timber/wood connections, ensuring structural integrity and easy installation. 3)Fabrication-Ready Sets: All deliverables are formatted for immediate use by contractors and fabricators, including precise cutting lengths, bending dimensions, and quantity take-offs.

my name is omar iam a mechanical engineer ...and member at formula car racing team resbonsible of design chassis ....my exp in solidworks 2 years ...i made many projects ..engine v6...fidget spiner..... Read more

my name is omar iam a mechanical engineer ...and member at formula car racing team resbonsible of design chassis ....my exp in solidworks 2 years ...i made many projects ..engine v6...fidget spiner...formula chassis...baja chassis ...enko runner shoe ...you can check all this projects in my profile prototypes

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsda... Read more

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsdale, AZ. ► Designed & Engineered WORLD'S most advanced luxury wallet, medical equipment, industrial components, products & more at: ♦VIEW PORTFOLIO & EXHIBIT:♦ w w w . lovesobhani . c o m From napkin-sketch to fully-functional final prototype, he's been there every step of the way. He's designed & engineered entire products (electrical, software & mechanical aspects) for nearly a decade on a contractual basis with prophetic proficiency. This created a multi-specialty Prototype & Design Engineer that is a super talented, professional expert with many intricacies of: ► Product Design & Engineering ► CAD Modeling ► ElectroMechanical Design & Engineering ► Realistic Rendering ► DFM (Design for Manufacture) Techniques ► Component Design ► Circuit & PCB Design ► Product Development & Optimization ♦ FULL PROFESSIONAL EXPERIENCE: ♦

Stephen Lemayan is the principal and owner of Masra Engineering Inc., and is a licensed professional Technician engineer in Kenya . Mr. Stepehn holds a Higher National Diploma Construction Structura... Read more

Stephen Lemayan is the principal and owner of Masra Engineering Inc., and is a licensed professional Technician engineer in Kenya . Mr. Stepehn holds a Higher National Diploma Construction Structural Engineering Option from Kenya Institute Of highway and Building Technology emphasis in advanced structural engineering and design, and foundations engineering; and a Diploma in Civil Engineering from the same Institution Mr. Stephen has worked for five years in the construction industry as a Technician engineer . He next spent about three with a Material Firm working as a material Technician engineer and has worked jointly with Leading architectural firms in kenya in Various projects as a Cad operative Stephen l sairo formed Masra Engineering in 2016 , and has subsequently consulted on a broad range of structural areas. These range from general civil and structural engineering to specific forensic failure investigations of foundations and Super Structures, to specialized stress analysis, testing and product design of manufactured structural products, encased buckling analysis of buried structures, composite sandwich structures,

Tijani Oluwafemi Muhydeen is my name. A graduate of electrical engineering. A professional designer. Am a citizen of Nigeria.Hobbies are reading, CAD design, traveling and gaming. I am the CEO of TOM-... Read more

Tijani Oluwafemi Muhydeen is my name. A graduate of electrical engineering. A professional designer. Am a citizen of Nigeria.Hobbies are reading, CAD design, traveling and gaming. I am the CEO of TOM-e automation and consultant .

Hello, my name is Kimberley Robinson and have been drafting with AutoCAD for 20 years. I’ve drafted numerous sketches, plans, and maps, mostly in the legal land surveying industry. I was a project man... Read more

Hello, my name is Kimberley Robinson and have been drafting with AutoCAD for 20 years. I’ve drafted numerous sketches, plans, and maps, mostly in the legal land surveying industry. I was a project manager for Southern SK of As-Built Maps of almost 800 flowlines and shapefiles created. I ran this project and successfully kept on the assigned budget per area, for large Oil & Gas company. My communication skills are honed by my experience as a Drafting Supervisor while living in northern Alberta. Microsoft Office knowledge with Excel and Word to assist tasks. Specializing in AutoCAD 2D drafting, I do work with AutoCAD Civil 3D. I understand the importance of detail and have the discipline skill of the Alberta Land Surveys Act, Alberta Land Titles Office and Crown Lands strict procedures. As part of urban design, I was involved in various stages of drafting for engineering design, as well as all survey plans, of an 88 lot subdivision in AutoCAD Civil 3D. I’ve also worked on a massive plant construction project which had to be in imperial measurements. With my knowledge, I played the key role in template requirements for AutoCAD setup. When you hire me, here’s what we would do: 1. Click the message button to invite me to your job. 2. Once everything is accepted, we would talk. 3. We’ll go over all the details, how things need to be laid out, functionality, deliverables expected, etc. If that all sounds good, click the “message” button and let's get your project completed. I look forward to hear from you.

I am a Civil Engineer of over 3 years of working experience cutting across structural analysis and structural designs of infrastructures.

I am a Civil Engineer of over 3 years of working experience cutting across structural analysis and structural designs of infrastructures.

BIM Interior Architect/Designer Profile • Experience and Skills: o Expert in Building Information Modeling (BIM) with a focus on ArchiCAD. o Proficient in creating detailed 3D models and accurate pr... Read more

BIM Interior Architect/Designer Profile • Experience and Skills: o Expert in Building Information Modeling (BIM) with a focus on ArchiCAD. o Proficient in creating detailed 3D models and accurate project documentation. o Skilled in coordinating with architects, engineers, and construction professionals to ensure project success. o Strong understanding of architectural design principles and construction processes. o Adept at managing project timelines and delivering high-quality results under tight deadlines. • Strengths and Skillsets: o Advanced knowledge of ArchiCAD and BIM workflows. o Excellent problem-solving abilities and attention to detail. o Strong communication and collaboration skills. o Ability to integrate and manage various project data efficiently. o Proficiency in visualizing and presenting complex architectural concepts. • Projects and Accomplishments: o Successfully completed multiple large and small scale residential and commercial projects. o Recognized for delivering innovative design solutions that meet client requirements. o Consistently met project deadlines while maintaining a high standard of quality. • Education: o Bachelor's Degree in Interior Architecture - France. o Master Degree in Retail Design and Visual Merchandising - Barcelona. o Master Degree in Design Management - Barcelona. o Continuing education in BIM technology and ArchiCAD advancements.

I am a Freelancer CAD designer and Graduate Mechanical Engineer with a vision to create a more sustainable environment by creating efficient designs & products. Having good experience in Mechanical en... Read more

I am a Freelancer CAD designer and Graduate Mechanical Engineer with a vision to create a more sustainable environment by creating efficient designs & products. Having good experience in Mechanical engineering principles & Mathematics, Also well versed with 2D, 3D CAD modeling designing & drafting using software like AutoCAD, Solidworks & Fusion 360. A self-learner who believes in improving myself on a daily basis.

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different proje... Read more

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different projects with Robert Bosch GmbH company. I have a broad range of skills in Computer-Aided Design (CAD), Computational Fluid Dynamics (CFD), and Finite Element Analysis (FEA). I am proficient at COMSOL, ANSYS, Abaqus, SolidWorks, CATIA V5, Inventor, AutoCAD MEP, Revit, Pro/E [Creo], Matlab, Simulink, Python, Matlab LiveLink, Mathematica, and Dualfoil. SolidWorks Certifications: -Associate and Professional in Mechanical Design (CSWA and CSWP). Please Visit My Portfolio: https://drive.google.com/file/d/1mIvxhUFDAw-8TxiUwuxsUn_8ZLm3oECV/view?usp=sharing

Architectural Design | Floor Plan | 3D Modeling | Interior | Walkthrough | Top Cut | Elevation | Structural Drawing

Architectural Design | Floor Plan | 3D Modeling | Interior | Walkthrough | Top Cut | Elevation | Structural Drawing

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie... Read more

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.

I worked with SH Engineering & Mfg. for 8 years. I drafted for steel fabrication for 4 years. 2 of the 4 years were spent heading the product department which focused on piping and pipe supports and m... Read more

I worked with SH Engineering & Mfg. for 8 years. I drafted for steel fabrication for 4 years. 2 of the 4 years were spent heading the product department which focused on piping and pipe supports and misc. fabricated items. We fabricated from Steel, Stainless Steel, and Aluminum. Now I own the Delightful Neighborhood Market, a neighborhood grocery store. I miss doing design work and would like to do extra work to earn extra money to save for my children’s college.

BIO-DATA NAME : Biprodas Roy DATE OF BIRTH : 2nd March, 1978 EDUCATION : Diploma in Mechanical Engineering, 2001 from Malda Polytechnic Engg. College SPECIALISATION Installation of BOP, AHP, C... Read more

BIO-DATA NAME : Biprodas Roy DATE OF BIRTH : 2nd March, 1978 EDUCATION : Diploma in Mechanical Engineering, 2001 from Malda Polytechnic Engg. College SPECIALISATION Installation of BOP, AHP, CHP, DM Plant and auxiliary equipment in power plant including installation of critical piping. EXPERIENCE : Project Name Duration Responsibility EXPERIENCE WITH DEVELOPMENT CONSULTANTS PVT LTD. Thermal Power Plant (6X150 MW) of Aditya Aluminum Plant (HINDALCO LIMITED) at Lapanga, Odisha (6X150 MW). From No’11 to till date As RCM responsible for overall construction Supervision and quality Control, Project Monitoring, review and approval of Field Quality Plan, Co-ordination with Client, Contractors and DCPL design office, Clarification in drawing and Specification, Interpretation of Contract and ensure compliance of all activities by the contractor as per contract for the Project work. Site Observation Report, Also Experience in Autocad, Staad and Tekla, Ms Project, Ms Acess and Ms Office Nagarjuna Construction Company Ltd,as an Asst.Engineer- Mechanical Burnpure, W.B From May 2008 to Nov 2011. As Assistant Construction Engineer responsible for supervision of erection of Structural Steel and Equipment, Quality Control, planning and Progress monitoring, coordination, Project Planning Quantity Survey, Client Bill (RA Bill) preparation and Subcontractor bill Checking Etc . STEWARTS AND LLOYDS OF INDIA LTD as from Nov 2006 to May 2008. From Nov 2006 to May 2008. As Project Officer (Mech.) responsible for supervision of erection of Piping and Quality Checking, Project Planning Quantity Survey, Client Bill (RA Bill) preparation and Subcontractor bill Checking Etc Soft page Data Conversion Pvt. Ltd, CBD Belapur as From April 2002 to Nov 2006 Project Leader. Data Conversion, XML, HTML, Data Management etc Technical Skills • Software: AutoCAD, Staad, Tekla, MS Project, MS Access, MS Office • Project Tools: Primavera P6 • Other Skills: PQR Qualification, FQP Approvals, 3D modeling Common Job Responsibilities • Creating AutoCAD drawings (GA, isometric, layout, structural) • Checking Staad files for design and GA • Staad to Tekla 3D modeling and fabrication drawing • Data control using MS Access • Daily progress monitoring and client coordination • Bill certification in reference to the billing schedule

I have experience in a broad range of IT and digital graphics production skills. Since childhood, I've had an interest in creating digital/virtual environments.

I have experience in a broad range of IT and digital graphics production skills. Since childhood, I've had an interest in creating digital/virtual environments.

B.E. in Mechanical Engineering having 12+ year experience Project Management, Layout finalization, Structural Detailing, RCC Design, Project Scheduling.

B.E. in Mechanical Engineering having 12+ year experience Project Management, Layout finalization, Structural Detailing, RCC Design, Project Scheduling.

A Student at the Faculty of Engineering Alexandria University, Mechanical Engineering Department with A Semi-Professional knowledge of "SolidWorks" and Cad Design, And a 4 Years Experience and working... Read more

A Student at the Faculty of Engineering Alexandria University, Mechanical Engineering Department with A Semi-Professional knowledge of "SolidWorks" and Cad Design, And a 4 Years Experience and working on "SolidWorks" Software.

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surrounding... Read more

I am a hardworking and dedicated individual who strives to ensure that all work is completed to the best of my ability within the stipulated deadlines. I am a fast learner and adapt to new surroundings quickly. I am always ready for new and exciting challenges that will allow me to apply my knowledge and abilities that I have gained through my studies and work experience. I strive for personal skill development and ensure that I keep improving my existing skills while constantly learning new skills. In my current position I am greatly exposed and experiencing the engineering aspect of providing functional products to international clients. I am heavily involved in research and development of new innovative products as well as working on the improvement of current products, utilizing testing results and simulations to enhance the performance and reliability of the products. Our products performing vital roles in the safety and protection of equipment and people we have to adhere to strict codes, regulations and procedure, each teaching me essential skills required in any engineering field. In my previous position I specialize in metrology solutions, undergoing training in GOM precision scanning as the main field of expertise. I also have come to terms with dealing with clients and providing them with solutions that satisfy their needs and requirements. Throughout my course work at the University and concurrent part time work, I have acquired a sound and overall knowledge accompanied with several professional skills related to leading edge engineering principals, tools and practices with emphasis on designing, building and testing of mechanical systems. I am proficient in the use of various automated solutions including current releases of Solidworks, Ansys and Star CCM+ as well as a variety of engineering machining tools.

We are a group of mechanical engineers capable of providing 2D and 3D design. We have worked as engineers in the industrial sector and in product development.

We are a group of mechanical engineers capable of providing 2D and 3D design. We have worked as engineers in the industrial sector and in product development.