Hire the best Analog Electronics Design experts for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I'm electronic engineer specialized in high perfomance PCB design and embedded programming. I have fifteen years of experience in PCB designs for high performance boards. The last four and half yea... Read more

I'm electronic engineer specialized in high perfomance PCB design and embedded programming. I have fifteen years of experience in PCB designs for high performance boards. The last four and half years I was working in naval equipment design as echosounders and autopilots applying rigurous EMI standards. In my portfolio you can find pictures of same of my works. I know how mix digital microcontrolers, small signal conditionning and high power in same board without interfering. I use design rules recomended for manufacturers as Analog Devices, Texas Instruments, ST, etc. I have a knowlegments in net sensors area and PCB design for RF applications (2.4GHz) like Zigbee, Bluethoot and WiFi. I can work by tasks or for hour, like you prefer.

Lifelong electronics nerd, formal education in physics and TV production. Informal education in fine art, photography, music. Career mainly focused on 2D and 3D graphics, image processing, working wit... Read more

Lifelong electronics nerd, formal education in physics and TV production. Informal education in fine art, photography, music. Career mainly focused on 2D and 3D graphics, image processing, working with EEs, MEs, physicists, astronomers, medical doctors on devices, calibration, computer vision, R&D. Picked up Blender way back in BeOS days, got good at it. Now I use it, if not directly for work, for making illustrations or motion graphics for reports, user manuals, or advertising. Background in physics, electronics, expertise in simulations for electronics (ngspice etc) and optics (goptical), or others as needed.

I am currently working full time as an electrical engineer for a Fortune 500 company in R&D. Using Upwork for additional income on the side. Past projects include full infrared camera designs, hig... Read more

I am currently working full time as an electrical engineer for a Fortune 500 company in R&D. Using Upwork for additional income on the side. Past projects include full infrared camera designs, high speed automotive SERDES, and medium power/medium voltage (less than 50V, less than 50 watt) DC/DC, AC/DC, DC/AC power supply designs. Strong proficiency in OrCAD/Allegro, some experience designing in Eagle as well. Proficient with programming for Arduino - if you're looking for a quick proof of concept I can help get you there.

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and contr... Read more

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and control theory to make superb applications and products. The name of the game is successful integration between different domains, which is a missing skill searched by many engineers, and needed by many Start-ups. I am new here, but I have finished more than 60 freelancing tasks and missions in other sites. I have used PIC microcontroller and Arduino to implement so many projects, and I have even used them to make commercial products. I have the talent of integrating embedded systems with electronics and GUI interface to make a complete application. I used microcontrollers in applications like: Sensors Interfacing (GPS-Motion-Encoder-Light-Temperature-Level-Pressure-Vibration-Position) - CNC machine control - Proportional and on/off temperature controllers - Level controller - Power metering IC interfacing (Experience with ADE7953) - Wifi & IoT - GSM - SD card interfacing. Moreover, I have experinece in making integrated system between Raspberry pi and Arduino for applications that need so. Moreover, I have made many projects that involve signal electronics, power electronics, sensors and measuring systems, and signal conditioning. In addition, I and my team can give you support if you want a PCB design and soldering for your circuit. Regarding control and automation, I am finished master study in automatic control theory, and I have experience in designing embedded controllers - automatic control theory and applications - adaptive control - autotuners - system modeling & simulation- system Identification and parameters estimation - system dynamic response analysis - pole placement controllers - PID controllers - Scilab & Matlab software packages . In addition, I can give you support in PLC systems and ladder diagram programs for controlling industrial processes. In addition, I am using Java as GUI interface for my applications, so I have experience in how to make a java GUI program and to control an embedded system using it. I made several projects where I used Java to monitor sensor values, or to send control commands to electronic circuits. ِAlso I have worked before with Java libraries that serve scientific applications, like EJML matrix algebra library, JArduino (java for arduino) library, JFreeChart plotting library, ImageJ image processing libary, RXTX serial communication library, etc...

10 years+ of experiences in electronics hardware/software area. Read more

10 years+ of experiences in electronics hardware/software area.

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Specia... Read more

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Special Mastery in ALTIUM. Executed more than 500 projects 2. Proficient in using industry-standard design tools such as Altium Designer, EAGLE, KICAD, EASYEDA and PROTEUS, ensuring accurate and efficient circuit development. 3. IPC Certified Symbols and footprints Creation, High Speed PCB Design upto 5GHz 4. Multilayer PCB Design experience upto 32 Layers, Impedance Control, Length Matching, Antenna Tuning, Blind Vias, Buried Vias, Through Hole Vias 5. DFX(Design for Excellence) - DFA, DFM and DFT. First Time Right PCB - 98% 6. Compact PCB Design, Signal Integrity, Power Integrity, Single Sided, Double sided placement 7. Design Verification through Design Checklists ensuring robust, reliable and quality design 8. Applications- IOT, Consumer, Medical, Industrial, Defense etc 9. Microcontroller Interfacing - STM32, STM8S, ESP32, ESP8266, NXP, TI chipsets etc 10. Wireless Products, Battery Operated, Low Power, Low cost 11. Design Optimization - Could optimize design of any product by at least 25% 12. Design for Quality, Design Review 13. PCB Prototyping, Contract Manufacturing 14. Firmware Development - ARDUINO, C, C++ etc 15. Enclosure Design, 3D Printing, Sheet Metal, 16. Production Support 17. EMI EMC Compliant Design - RE, EMHF, Surge, EFT, Burst, Impulse, 35KV 18. Standards Experience - UL, CISPER, CE, Please contact me if you would like to develop a robust and reliable product If you are looking to bring your idea to life, contact me :)

I am an electrical engineer with industry design experience from prototyping to manufacture. I will specify components, design the circuitry, write the code, capture the schematic and generate PCB fil... Read more

I am an electrical engineer with industry design experience from prototyping to manufacture. I will specify components, design the circuitry, write the code, capture the schematic and generate PCB files for manufacture. Any feature (hardware or software) you would like to add can be incorporated - make it easy for yourself! I have a good deal of experience in motion control applications, as well - brushed/brushless DC motors, stepper motors, linear DC motors, gearheads, encoders, motion controllers, etc... I can help properly size a motor assembly for your application and integrate it into your system. I truly look forward to having a conversation with you about your needs and I am very flexible in how I can help. I will respond to your messages promptly. Thank you, Chris

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and So... Read more

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and Software developments, Commercial Interior / Exterior Lighting product design and manufacturing. We possess following technical domain expertise. · Multi layer PCB Design and development · Flexible PCB Design for Wearable electronics · Customize boards for GPS, Time of Flight (ToF) sensors. · Customize boards for Langmuir Probe biasing, Ramp Generator,Pulse power circuits. · Customize high speed ADC boards for various scientific experiments · Customize Data Logger and Data Acquisition system. · Embedded Software/Hardware system development for an application area like Robotics, Instrumentation,Automation and Aviation. · Fiber Optic based data links for analog and digital signal for instrumentation · Customized micro controller like AVR,Cortex,PIC, based development board design · Circuit design and development of various applications for accurate measurement of time/frequency/pulses. · Customized Embedded Software, Circuit designs and development for various sensors like temperature (RTD/TC), ultrasonic, capacitive, acoustic, optical,ToF etc. · Customized Embedded Software, Circuit designs and development for IMU sensor's Magnetometer, Gyroscope , Accelerometer etc. · Power supply design like Linear or SMPS (buck/boost) etc. · Analog and Digital Circuits design and development · Wearable electronics product design · LED Lights and Driver circuit design · Wireless/ RF circuits design · Electronic Component Supplier

Dynamic Electrical Engineer specializing in nuclear instrumentation systems, skilled in programming, and experienced in QA. Expertise in designing and implementing neutron instrumentation systems for... Read more

Dynamic Electrical Engineer specializing in nuclear instrumentation systems, skilled in programming, and experienced in QA. Expertise in designing and implementing neutron instrumentation systems for nuclear reactors. Proficient in Python (pandas, matplotlib, numpy, tkinter) and C++, enabling efficient development of plugins, firmware, data analysis, and data visualization. Demonstrated ability to lead teams and manage budgets as a Semi Senior Engineer, overseeing projects with budgets of approximately USD 500,000 and around 25,000 man-hours. Committed to delivering high-quality solutions that make a meaningful impact. Adept at problem-solving and collaborating in team environments.

Half of my life - is technology, engineering and gadgets. I've found my way when I was 15 years old - I've made my first PC case with led/fan control unit. My second lovve - cars and motorsport. That... Read more

Half of my life - is technology, engineering and gadgets. I've found my way when I was 15 years old - I've made my first PC case with led/fan control unit. My second lovve - cars and motorsport. Thats why I start studiyng in MADI (STU).

1. Embedded Hardware Skills - Eagle,Orcad schematic and PCB Design 2. VLSI Design - Analog Design using Cadence virtuoso 3.RF and Antenna Design using ADS, HFSS 4. Four Years of Experience With Master... Read more

1. Embedded Hardware Skills - Eagle,Orcad schematic and PCB Design 2. VLSI Design - Analog Design using Cadence virtuoso 3.RF and Antenna Design using ADS, HFSS 4. Four Years of Experience With Masters Degree 5. Several Embedded,RF,VLSI Industrial Projects successfully driven

Electronic Design Engineer with over 20 years experience in PCB design for production, covering multiple fields including power electronics, RF, medical, embedded systems, IoT and more... Read more

Electronic Design Engineer with over 20 years experience in PCB design for production, covering multiple fields including power electronics, RF, medical, embedded systems, IoT and more...

Senior India-based freelance consultant with several delighted clients across the globe, several published design ideas, and a track record of taking products from concept to completion as well as ree... Read more

Senior India-based freelance consultant with several delighted clients across the globe, several published design ideas, and a track record of taking products from concept to completion as well as reengineering / resurrecting poorly designed or born-dead product designs. Happy to help with large as well as small designs. I am truly turnkey - I handle part selection, architecture, schematic design, PCB design, assembly, firmware programming and end-to-end testing. What you get is a fully tested, manufacturing-ready prototype, from someone who has done it himself. I have several published articles on analog and digital electronics in respectable magazines like Electronics Design, Linear Audio and Elektor.

I have gained experience as an Electronics Engineer trained in analog and digital signal processing, I have 7 years of experience with multiple applications, including communications and RF power elec... Read more

I have gained experience as an Electronics Engineer trained in analog and digital signal processing, I have 7 years of experience with multiple applications, including communications and RF power electronics. I have skills developed within a number of computer-aided design packages, these include Autodesk Inventor, Autodesk Fusion 360, SolidWorks, AutoCAD, Visual Basic & C. In addition, I have gained experience using 3D printers & designed and developed a number of parts in both my spare time and in a professional environment. I have also produced a number of PCBs using the Autodesk Eagle and OrCAD software packages.

✅ Lead Electrical Engineer with 5 years' experience developing high-volume electronics devices. Track record of 40 IoT and Electronics products with 300,000+ devices used in Consumer, IoT, and Wearabl... Read more

✅ Lead Electrical Engineer with 5 years' experience developing high-volume electronics devices. Track record of 40 IoT and Electronics products with 300,000+ devices used in Consumer, IoT, and Wearable industries 🚀 Providing FULL-CYCLE design from Idea to Mass Production: Electronics, Firmware, Product Design, Mobile Software, Prototyping, Manufacturing. HARDWARE: - Schematic capture: Digital, Analog, Power electronics. EDA: Altium Designer. - PCB Layout: Altium Designer, 1 - 10 layers; - Component selection, BOM generation, manufacturing documents; PRODUCT DESIGN: - Conceptual industrial design. - Mechanical design in SolidWorks; Molded Plastic and Sheet Metal. FIRMWARE: - FPGA firmware in VHDL and Verilog for Altera/Actel/Xilinx FPGAs and SoCs; - MCU firmware in C/C++ for ARM, TI, NXP, Atmel, PIC, Arduino; - Bluetooth, Bluetooth Low Energy (BLE), and wireless modules programming. SOFTWARE: - Mobile apps: native apps for Android (Java) and iOS (Swift) - Frontend: Web interface (React, AngularJS) - Backend: Python with frameworks (Django) and Databases (PostGre /MySQL) - User interface (UI, UX) PROTOTYPING: - PCB Prototype manufacturing, debugging, and validation; - Consultation on any aspect of design and manufacturing. HIGHLY SPECIALIZED IN: CONSUMER electronics: - IoT projects, sensors, wearable electronics, Smart-home systems; - Computer peripheral devices (HID and custom devices); INDUSTRIAL electronics: - High-reliability systems for critical applications (Robotics, Oil and Gas, Automation); - Micro-controller and FPGA-based Control systems; - Power Supplies (AC/DC/AC) and Electric Drives (240/480VAC); WIRELESS communication: - Bluetooth and BLE-enabled devices (Bluetooth 4.0/4.2/5.0, BLE. GATT, A2DP); - 2.4Ghz radio transmitters (WiFi, Bluetooth, Radio); - 300/400 Mhz Custom analog and digital radio; AUTOMOTIVE / ELECTRIC VEHICLES: - On-Board Chargers (OBC) - Battery-management systems (BMS) ************************************************** TOOLS AND DEVICES: *PCB* : Altium Designer, Cadence OrCad. *FPGA and SoC* : VHDL, Verilog, ModelSim, Quartus, Xilinx ISE, Libero Soc. Altera Cyclone 2, Cyclone 4, Max 9, Max 10. Xilinx Spartan, Zynq, Virtex, Kintex. *BLUETOOTH* : CSR8670 / BC04 / BC05. TI: CC2640, CC2650, CC2541, CC3220. *MCU* : ARM Cortex A, ARM Cortex M. NXP LPC4370; TI C2000 (Piccolo, InstaSpin), MSP430, MSP432; Atmel: Atmega2650, Attiny; ********* Position: Lead Electrical Engineer Education: MS in Electrical Engineering ********* Tags: Electrical Engineer, Electrical Engineering, Electronics, Hardware, Firmware, PCB, PCB layout, Board layout, Schematics, Altium Designer, IoT, Internet of Things, Power Electronis, Bluetooth, BLE, TI, Texas Instruments, FPGA, SoC, VHDL, Verilog, Xilinx, Altera, VHDL, C, C++, MCU, RTOS, Microcontroller, prototype, validation, Enclosures, BMS, SolidWorks, Android, iOS, Java, Swift, Mobile Apps, Database, React, PostGre, AWS, Python.

I am formally educated in many fields of design drafting including mechanical, piping, architectural, electrical, and industrial design. I am also educated in descriptive geometry, fluid dynamics, pow... Read more

I am formally educated in many fields of design drafting including mechanical, piping, architectural, electrical, and industrial design. I am also educated in descriptive geometry, fluid dynamics, power distribution, electronics, machine tools, product development and workflow, materials sciences, safety, supervision, engineering codes, and more. I have eight years of professional experience as a piping/mechanical designer with a focus in 3D design. I have over 15 years of experience with AutoCAD software and have professionally designed complex high pressure tubing systems, offshore and onshore piping systems, unique mechanical/structural supports, electrical pipe heat tracing circuits, commercial and residential buildings, valves, eyewash stations, tanks, vessels, and heat exchangers. I enjoy learning new software and pursuing other fields of design including audio, security, outdoors/survival, pet/animal, farming, tools, and hobbies. In my spare time I design and prototype analog electrical circuits such as portable power applications, musical sound effects, amplifiers, preamplifiers, speaker cabinets, and portable music applications.

We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of... Read more

We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical(3D print, CNC and molds). Our key skills are IoT, Embedded KIT, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, Flash, DDRx, PCIEx, SATA, Ethernet, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TEST services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. We provide Service & Support even after completion of the projects,when ever necessary. Please contact me & we can discuss more.

I graduated as an architect in 2014 in Mérida - Venezuela. I worked as an artist at Fuga Muralista (IG: @fugamuralista) for 5 years, having the privilege to collaborate with people as Juvenal Ravelo;... Read more

I graduated as an architect in 2014 in Mérida - Venezuela. I worked as an artist at Fuga Muralista (IG: @fugamuralista) for 5 years, having the privilege to collaborate with people as Juvenal Ravelo; and be one of the 7 pre-selected Venezuelan artist groups to BIENALSUR in 2017. Currently, I work part-time in my own coffee shop that me and two friends opened in 2017 (IG: @heliconias_merida / @heliconias_choc) and now we have our own brand of 'bean to bar' chocolate; and the rest of the time I'm working as an architect and interior designer for a private studio (EQUILATEROS). I don't really label my style as an architect, but I think that my main skills are being very efficient with the design, costs, materials, and execution; always keeping a perfect balance in the result as the most important factor visually and functionally (and of course, as an artist, it has to be beautiful in every single way). I'm looking forward to gain more experience and be productive.

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing... Read more

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing company and in a reputable engineering consultancy doing work for many of their international clients and always subjected to high quality standards. I'm offering my expertise and skills to help you develop your projects from concept to reality. Client satisfaction is my priority.

DN Design is an interior design studio, experienced in every aspect of interior design. We offer our customers a wide range of services tailored to each individual client’s needs. Our customers are... Read more

DN Design is an interior design studio, experienced in every aspect of interior design. We offer our customers a wide range of services tailored to each individual client’s needs. Our customers are always at the center of attention, and we are focused on creating interiors that perfectly express their own style. Our team of passionate and committed interior designers guide and manage your design project, providing clear communication on budgets, timelines, aesthetic, and quality to meet and exceed client expectations. Our goal is to create a beautiful and comfortable spaces that brings lasting pleasure to its owners. DN Design Team

+5 years of experience using solidworks and inventor. +5 years of experience in mechanical industry. (design. maintenance, manufacture) +5 years of experience using shop tools. (lathe, mill , c... Read more

+5 years of experience using solidworks and inventor. +5 years of experience in mechanical industry. (design. maintenance, manufacture) +5 years of experience using shop tools. (lathe, mill , cnc, plasma, waterjet) Knowledge of design codes. (API, CEMA, NEMA, ASME, AWS, ANSI, and others.) Areas of experience: Workshop. Mining. Concrete industry.

Hi There, This is Mathi. Freelance 3D Visualizer & Motion Graphic Designer. 8 years of experience for any types of ndustrial 3D Design Animation and Motion Graphics. Detailed 3D Model & Photo-realisti... Read more

Hi There, This is Mathi. Freelance 3D Visualizer & Motion Graphic Designer. 8 years of experience for any types of ndustrial 3D Design Animation and Motion Graphics. Detailed 3D Model & Photo-realistic rendered image output is GUARANTEED..... Our service are Simple 3D model, Exploded view, correction in 3D model, 3D model into 2D drawing, Image into 3D model (without detail), sketch into 3D model, Idea or invention into 3D model (with detail), Complex Model (with detail), sketch up, 3D model animation video(HD). Aircraft, Automobile, mechanism, Pump, Structures, buildings, automation, machines, shafts,fabrication,sheet metal,Tooling,and Molding,Press component I often provide clients with 2D design and 3D model animation in SolidWork, AutoCAD and Pro/e softwares.

A well informed and highly skilled Mechanical Design Engineer with a Marine Engineering background. I am capable of providing Engineering design services in a wide range of industries. Read more

A well informed and highly skilled Mechanical Design Engineer with a Marine Engineering background. I am capable of providing Engineering design services in a wide range of industries.

◘ Mechanical engineer ◘ 7+ years experience in industry ◘ Product Designer ◘ 5-axis CNC programmer ◘ Project engineer for various clients such as Burberry, Harrods, Versace ◘ SolidWorks expert ✔... Read more

◘ Mechanical engineer ◘ 7+ years experience in industry ◘ Product Designer ◘ 5-axis CNC programmer ◘ Project engineer for various clients such as Burberry, Harrods, Versace ◘ SolidWorks expert ✔ ◘ Inventor expert ✔ ◘ AutoCAD expert ✔ ◘ CEO at Internet Marketing Agency ◘ and much more...

18 year experience in various mechanical design such as Heating, Ventilation and Air-Conditioning (HVAC), Fire Protection systems (includes fire sprinkle system and FM-200), Plumbing, Drainage systems... Read more

18 year experience in various mechanical design such as Heating, Ventilation and Air-Conditioning (HVAC), Fire Protection systems (includes fire sprinkle system and FM-200), Plumbing, Drainage systems, Irrigation systems, Water Supply Systems, Piping system and Lifting equipment.