Hire the best freelance 3D PCB LAYOUT expert designers for your company

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

As a DAE in Electronics with 03 years at the Pakistan Navy's Naval Precision Electronics Complex (NPEC), I specialize in precision multi-layer PCB design, ensuring optimal signal/power integrity and D... Read more

As a DAE in Electronics with 03 years at the Pakistan Navy's Naval Precision Electronics Complex (NPEC), I specialize in precision multi-layer PCB design, ensuring optimal signal/power integrity and DFM/DFT adherence. My experience in mission-critical systems, including advanced radars and sonars, demonstrates a strong capability in complex electronic troubleshooting and problem-solving, making me adept at delivering robust and reliable designs for diverse projects.

I am an Electrical Engineering student at NUTECH Islamabad with hands on experience in PCB design and embedded systems I design custom PCBs in KiCad from scratch — starting from schematic all the way... Read more

I am an Electrical Engineering student at NUTECH Islamabad with hands on experience in PCB design and embedded systems I design custom PCBs in KiCad from scratch — starting from schematic all the way to Gerber files ready for manufacturing. My designs are clean DRC verified and optimized for real world manufacturing at fabs like JLCPCB and PCBWay Projects I have designed: Arduino Nano Breakout Board with full pin breakout screw terminals reset button and reverse polarity protection Custom ESP32 development board Custom Arduino Nano board Bidirectional Visitor Counter Smart Irrigation System Line Follower Robotics What I bring to your project: Complete KiCad workflow from schematic to layout to Gerbers 2-layer pr multi-layer PCB design optimized for low cost manufacturing Proper design rules clearances and DRC verification and EMI verification as well before delivery Clean silkscreen labelling and 3D verification of every board I take your idea and turn it into a manufacturable board ready to order

Precise. Technical. Manufacturing-Ready. I specialize in turning complex concepts into high-quality 3D models and photorealistic renders. With a focus on Design for Manufacturing (DfM), I ensure your... Read more

Precise. Technical. Manufacturing-Ready. I specialize in turning complex concepts into high-quality 3D models and photorealistic renders. With a focus on Design for Manufacturing (DfM), I ensure your parts are optimized for 3D printing, CNC, or injection molding. Top Services: • 3D Part & Assembly Design (SolidWorks/Fusion 360) • Technical 2D Drawings & Patent Drafting • High-End Product Rendering (KeyShot) • STL Optimization for Rapid Prototyping I deliver clean files, clear communication, and fast turnarounds. Let’s bring your project to life.

I am a multidisciplinary engineer specializing in the integration of mechanical design, electronics, and software development to deliver complete, real-world engineering solutions. With a strong found... Read more

I am a multidisciplinary engineer specializing in the integration of mechanical design, electronics, and software development to deliver complete, real-world engineering solutions. With a strong foundation across these domains, I bring a systems-level perspective that allows me to design, prototype, and implement projects from concept to deployment. On the mechanical side, I have extensive experience in CAD design, product development, and manufacturing-ready solutions. I focus on creating efficient, practical designs that consider real-world constraints such as materials, fabrication methods, and cost optimization. In electronics, I work with embedded systems, PCB design, and hardware integration. I am comfortable developing schematics, selecting components, and ensuring reliable communication between hardware and control systems. On the software side, I develop firmware and control logic for embedded devices, as well as higher-level applications for automation, data acquisition, and system monitoring. I have experience working with microcontrollers, PLCs, and industrial communication protocols, enabling seamless integration between hardware and software systems. What sets me apart is my ability to bridge these disciplines. Instead of treating mechanical, electrical, and software components separately, I design them as a unified system—resulting in more robust, efficient, and scalable solutions. I have worked on projects ranging from industrial automation and embedded systems to custom machinery and prototyping. I collaborate effectively with cross-functional teams, including mechanical engineers, electrical engineers, and software developers, ensuring smooth communication and successful project delivery. If you are looking for someone who can take ownership of a project end-to-end, reduce complexity, and deliver practical engineering solutions, I would be glad to help bring your ideas to life.

* Am able to mentally envision how a new piece of electronic gear is put together and then by using both the SolidWorks Premium and the CADENCE/OrCAD "OrCAD X" programs, can then perform both the mech... Read more

* Am able to mentally envision how a new piece of electronic gear is put together and then by using both the SolidWorks Premium and the CADENCE/OrCAD "OrCAD X" programs, can then perform both the mechanical and PCB-designs required to create either a prototype and/or a "First-Article-Build" of a new product designs. * Able to -- convert/translate -- a schematic diagram into a BOM of "actual physical reality components" which can be sourced by multiple suppliers and vendors and/or fabricated as a "custom" designed part as is necessary. * Able to both specify and source multiple outside vendors for all purchasing requirements. * Can easily communicate and interface with multiple outside suppliers and vendors and also be the "contact person" for all of these external/outside companies. * Have also acted as an "Electronics Purchasing Agent" and have personally purchased over $3,000,000.00+ worth of electronic components, hardware and outside vendor services (i.e. cable & wiring assemblies & sheet-metal and PCB fabrication services). * Under the correct conditions and leeway, it is possible for me to take a schematic diagram and do -- ALL -- that is necessary to provide a client company with a completely finished physical product of which they can either hold in their hands or be mounted into a 19" equipment rack. I've done this before!!! /

I am Md. Sanowar Hossin, an Electrical and Electronic Engineer with 13+ years of experience in electronics R&D. I specialize in high-quality PCB design and embedded systems development. My expertise i... Read more

I am Md. Sanowar Hossin, an Electrical and Electronic Engineer with 13+ years of experience in electronics R&D. I specialize in high-quality PCB design and embedded systems development. My expertise includes advanced PCB layout using Altium Designer, KiCad, EasyEDA, and Eagle. i was completed more then 1000 PCB Design for my clients. I work with Analog, Digital, Power Electronics and Microcontroller based systems. I have a deep background in microcontroller programming, having successfully completed numerous projects using AVR and PIC architectures, specifically the PIC16F, ATmega8, and ATmega16 series. Additionally, I am highly proficient in developing IoT and wireless solutions using Arduino, ESP8266, and ESP32 microcontrollers. I provide for client: * PCB Design (Single-layer, Double-layer, Multi-layer) * Reverse Engineering * Schematic Design from physical boards or images * Gerber, BOM, and Pick & Place File * Arduino and Embedded Hardware and programming. * PIC/AT-Mega Microcontroller Based Embedded system Hardware and programming. * DFM (Design for Manufacturing) * Component Placement and Routing Optimization * Silkscreen, Drill Files, and Layer Stackups * ESP32 Design * Gerber Files I provide unlimited reviews for my client.

I’m a PCB Design Engineer with over 10 years of professional experience in electronic hardware development. Throughout my career, I have successfully designed and delivered numerous industrial control... Read more

I’m a PCB Design Engineer with over 10 years of professional experience in electronic hardware development. Throughout my career, I have successfully designed and delivered numerous industrial control systems, IoT modules, communication boards, power electronics, and mixed-signal circuits From schematic conception and component selection to PCB layout, Gerber generation, DFM review, and prototype testing.

I am a skilled PCB design specialist with extensive experience in creating high-quality, reliable, and efficient printed circuit board layouts for a wide range of applications, including consumer elec... Read more

I am a skilled PCB design specialist with extensive experience in creating high-quality, reliable, and efficient printed circuit board layouts for a wide range of applications, including consumer electronics, IoT devices, industrial systems, and embedded solutions. My expertise spans the entire PCB design process—from schematic capture and component selection to layout optimization and design verification—ensuring your product meets both functional and manufacturing requirements. I work with industry-leading tools such as Altium Designer, KiCad, Eagle, and OrCAD, and I strictly follow DFM (Design for Manufacturing) and IPC standards to guarantee precision and cost-effectiveness. Whether you need single-layer, multi-layer, or high-speed PCB designs, I can deliver tailored solutions that prioritize performance, durability, and compliance with regulatory standards.

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

Electrical & Mechanical Design Engineer with 6 years of experience in the field(s). Offering B2B and B2C solutions through my company EM Engineering Solutions. CAD/ECAD design and manufacturing soluti... Read more

Electrical & Mechanical Design Engineer with 6 years of experience in the field(s). Offering B2B and B2C solutions through my company EM Engineering Solutions. CAD/ECAD design and manufacturing solutions.

Graduated BS EE at a renowned Boston University. Extensive lab experience in both low and high voltage/power/and frequency applications. Experienced in Military grade circuit board design, fabrication... Read more

Graduated BS EE at a renowned Boston University. Extensive lab experience in both low and high voltage/power/and frequency applications. Experienced in Military grade circuit board design, fabrication, and documentation

Hii, I am Deepan from Chennai. I work in PETROSERVE INTERNATIONAL for the past 8months as a Mechanical Draughtsman. My work is to make detail drawing for Skids that are used in oil & gas industry, And... Read more

Hii, I am Deepan from Chennai. I work in PETROSERVE INTERNATIONAL for the past 8months as a Mechanical Draughtsman. My work is to make detail drawing for Skids that are used in oil & gas industry, And also i have worked on 3Dmodels also.

A reliable electronics engineer and PCB designer with 15+ years of experience (trusted by clients worldwide) in PCB design, schematic capture, hardware development, and manufacturing support. I delive... Read more

A reliable electronics engineer and PCB designer with 15+ years of experience (trusted by clients worldwide) in PCB design, schematic capture, hardware development, and manufacturing support. I deliver production-ready designs that reduce risk, shorten development cycles, and work right the first time. My PCB designs are not only functional but manufacture able, testable, and scalable. With my 100% Job Success Score, I help clients turn ideas into robust, production-ready electronic products. My specialization is in circuit design, schematic capture, multilayer PCB layout, embedded systems, power electronics, RF and microwave circuits and analog circuits. I can do design reviews, hardware development, hardware debugging, reverse engineering, design optimization, troubleshooting and ensure your project is delivered with precision and attention to detail. ⭐ Core Expertise ⭐ ✅ Multilayer PCB designing ✅ PCB design with high speed interfaces, such as LVDS, HS-CAN, CAN FD, RS-422, RS-485, USB 3.0, FPGA high speed SerDes, PCIe, LVPECL, LPDDR4 clock, HDMI ✅ High power PCB design up to 4 layers, 3.2 KW, 320V output at 10A load current ✅ Design for Manufacturing (DFM) & Design for Assembly (DFA) using JLC PCB and PCB way services ✅ EMC / EMI aware PCB design practice using industry standards such as IPC-2221, IEC61188, DO-254 ✅ JLC PCB and LCSC parts selection, finding in-stock components, creating BOM with updated and available parts, finding alternate parts with similar technical specifications ✅ Generating Gerber files, NC Drill files, CPL files, BOM files for production, prototyping & mass manufacturing ✅ Schematic and PCB design review ✅ Circuit Designing, analog, digital, RF, microwave, embedded, high power circuit designing ✅ Circuit Simulation & Analysis ✅ Microcontroller Programming in C language ✅ Reverse engineering from given Gerber files, PCB images, BOM ✅ Problem solving, hardware development, troubleshooting, hardware debugging, design optimization for power, thermal, mechanicals constraints ⭐ PCB Design Software ⭐ ✅ Altium Designer v24 ✅ KICAD v9 ✅ DIP TRACE ✅ EasyEDA ⭐ Circuit Simulation Software ⭐ ✅ LTspice ✅ Proteus ✅ Multisim ✅ Keysight ADS ✅ Ansys HFSS ⭐ Programming ⭐ ✅ MPLAB X IDE ✅ C Language ✅ MATLAB SIMULINK ⭐ 3D Mechanical Design ⭐ ✅ SolidWorks ✅ PTC Creo ✅ Flow Therm ⭐ Power & analog circuit Projects ⭐ Power electronics, op-amp circuits, ADC/DAC interfaces, signal conditioning, piezo electric transducer driver, flyback converter, buck boost converter, laser diode driver, LED light driver, constant current and PWM control of LED lights, Switch Mode Power Supply (SMPS) design, linear power supply design, switching transformer magnetics design, AC load control using TRIAC, DC load control using SCR, H-Bridge driver for BLDC motor control using high power MOSFETS, gate driver circuit, multivibrator circuit using 555 timer, counter circuits, relay control, IGBT circuit for DC to AC inverter, bridge rectifier circuit for AC to DC converter ⭐ Industrial Projects ⭐ Temperature, humidity, weight, pressure sensors circuit design for instrumentation electronics, data logging, real time telemetry monitoring, signal conditioning circuit, feedback control circuits, robotics and actuator control, solenoid valve for flow control, PLC, DCS, SCADA for industrial automation, ⭐ RF Projects ⭐ X-Band and S-Band microwave RF power amplifier using GaN and GaAs devices, preamplifier, Directional coupler, band pass filter, Wilkinson divider, diplexer, microstrip transmission lines impedance matching, Low Noise Amplifier (LNA), mixer, microstrip patch antenna, electronic beam steering T/R modules, I/Q modulator, phased array circuits ⭐ Audio Projects ⭐ Audio Electronics: Amplifiers, filters, DSP-based audio processing, low-noise analog design, analog crossover network, equalizer, stereo and mono dual channel amplifier, phono preamplifier, hydrophone amplifier, MEMS based microphone array design, electret microphone amplifier, CODEC, RCA to XLR converter, phantom power supply, audio power amplifier for 8 and 4 ohm loud speakers, ⭐ Digital Electronics Projects ⭐ Digital logic circuits using discrete ICs, sequential circuit, NAND Flash memory circuit, mixed signal circuit using RF transceiver blocks with SMA connectors, FMC HPC connectors, high speed signaling with FPGA Actel, Xilinx, DSP controller from microchip, microcontrollers from Silabs, PIC, ATMEL C8051, ATMEGA, TMS320F28335, ESP32-C5, ESP32-S3, STM32, RPI, ARDUINO ⭐ Why Clients Choose Me ⭐ ✅ End-to-End Capability — from concept → schematic → PCB → firmware → prototype. ✅ High-Speed PCB Specialist —Impedance controlled routing and EMC/EMI aware designs ✅ Strong Communication — clear documentation, regular updates, and fast responses. ✅ Proven Track Record — 15+ years of hands-on design experience. ✅ Client Satisfaction — long-term ▒▒▒▒▒▒ client relationships, repeat contracts, and 5⭐⭐⭐⭐⭐ feedback

I'm a professional PCB Design Engineer with a strong background in electronics, robotics, and electrical system design. I help clients transform their ideas into real, working hardware — from schemati... Read more

I'm a professional PCB Design Engineer with a strong background in electronics, robotics, and electrical system design. I help clients transform their ideas into real, working hardware — from schematic to production-ready PCBs. With a strong command of both hardware and firmware, I bring full-stack electronics development under one roof. My Core Services: PCB Design & Layout (Single, Double, Multilayer) Schematic Capture & Circuit Design High-Speed & Compact PCB Layouts Robotics System Design & Control Electrical Drawing and Layout Design (AutoCAD Electrical) Tools & Platforms I Work With: Altium Designer, EasyEDA Proteus, Multisim for simulation Autodesk AutoCAD for electrical schematics Why Choose Me? Clear communication & timely delivery Expertise across both hardware and embedded firmware Strong problem-solving skills and attention to detail Focused on building long-term working relationships Whether you're a startup, engineer, or company looking for a reliable PCB and embedded systems expert, I’m here to bring your electronic projects to life. Let’s connect and discuss how I can help with your next project!

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industr... Read more

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industrial projects

Proficient in Altium Designer, Cadence Allegro, OrCAD Schematic, and PADS Layout. Experienced in high-speed design, multilayer PCB layouts, and signal integrity analysis. Skilled in multilayer board d... Read more

Proficient in Altium Designer, Cadence Allegro, OrCAD Schematic, and PADS Layout. Experienced in high-speed design, multilayer PCB layouts, and signal integrity analysis. Skilled in multilayer board design and high-speed signal routing. An effective communicator with experience in design documentation and design reviews. Successfully designed and delivered numerous load board and burn-in PCB projects from concept to production.

I am Devesh Kumar Patel and I am a fresher in the field of Electronics and want to leverage my knowledge in the real world problems. In this Era of Ai, I am able to implement Ai in my role.

I am Devesh Kumar Patel and I am a fresher in the field of Electronics and want to leverage my knowledge in the real world problems. In this Era of Ai, I am able to implement Ai in my role.

Bilingual Mechanical Engineer pursuing a double degree in Electronic Engineering with professional experience in the design and manufacturing of mechanical components for unmanned aerial vehicles (UAV... Read more

Bilingual Mechanical Engineer pursuing a double degree in Electronic Engineering with professional experience in the design and manufacturing of mechanical components for unmanned aerial vehicles (UAVs) in the aerospace industry. Skilled in the integration of mechanical and electrical systems for the development of electric vehicles and their electronic speed control. Proficient in 3D modeling for manufacturing purposes, product design, and has extensive knowledge in the creation and interpretation of mechanical drawings. Experienced in FEA analysis, competent in Autodesk CAD, CAE, and CAM software, and well-versed in fluid mechanics and heat transfer analysis. Additionally, skilled in the use of Microsoft Office productivity tools.

Antenna designer -Circuit Design -PCB Designer -ARDUINO IDE 3D Modelling AutoCAD -javascript -python -mobile app develpment (android , IOS) -solidworks - CST Microwave Studio -ANSYS HFSS -Sonar equip... Read more

Antenna designer -Circuit Design -PCB Designer -ARDUINO IDE 3D Modelling AutoCAD -javascript -python -mobile app develpment (android , IOS) -solidworks - CST Microwave Studio -ANSYS HFSS -Sonar equipment Operation and maintenance -Radar operator and maintenance maintenance . -MATLAB , Simulink , GUI -Multisim, Kicad -C++C++ -Logo Design -Adobe Photoshop -Radar System Engineer and underwater acoustic -Microwave

Mechatronics engineer specializing in product design, robotics, and embedded systems with strong hands-on experience in CAD, rapid prototyping, and fabrication. Experienced in developing functional en... Read more

Mechatronics engineer specializing in product design, robotics, and embedded systems with strong hands-on experience in CAD, rapid prototyping, and fabrication. Experienced in developing functional engineering solutions from concept to physical implementation using Arduino, ROS, SolidWorks, and digital manufacturing tools. Interested in R&D, robotics, automotive systems, and mechanical product development.

Works I had done:- A. Solidworks experience:- 1. CADed crank and piston arrangement of inline 4 engine. 2. CADed very basic rotating configuration of jet engine. 3.CADed a monocoque chassis 4.CADed ma... Read more

Works I had done:- A. Solidworks experience:- 1. CADed crank and piston arrangement of inline 4 engine. 2. CADed very basic rotating configuration of jet engine. 3.CADed a monocoque chassis 4.CADed main hoop bar similar to the one used in formula student. 5.CADed various mounts used in a car. 6.CADed a toothbrush (quite complex design). b. Autodesk Fusion 360 work:- 1.CADed a complete remote controller for a drone. 2.CADed drone landing gears in a team. 3. CADed a sapas12(gun) in a team of two. 4.CADed a lot of driving mechanisms used in mechanical engineer operations. 5.CADed a lot of 2d sketches. c. Ansys work :- 1. Ran various structural analysis simulations for the CAD designed.

As a highly driven electronics design engineer, I bring a sophisticated approach to the full spectrum of product development—from initial circuit modeling and simulation through to professional-grade... Read more

As a highly driven electronics design engineer, I bring a sophisticated approach to the full spectrum of product development—from initial circuit modeling and simulation through to professional-grade PCB layout. With a strong command of KiCad’s advanced feature set and a sharp focus on functional precision and manufacturability, I deliver polished solutions that stand out.

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Specia... Read more

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Special Mastery in ALTIUM. Executed more than 500 projects 2. Proficient in using industry-standard design tools such as Altium Designer, EAGLE, KICAD, EASYEDA and PROTEUS, ensuring accurate and efficient circuit development. 3. IPC Certified Symbols and footprints Creation, High Speed PCB Design upto 5GHz 4. Multilayer PCB Design experience upto 32 Layers, Impedance Control, Length Matching, Antenna Tuning, Blind Vias, Buried Vias, Through Hole Vias 5. DFX(Design for Excellence) - DFA, DFM and DFT. First Time Right PCB - 98% 6. Compact PCB Design, Signal Integrity, Power Integrity, Single Sided, Double sided placement 7. Design Verification through Design Checklists ensuring robust, reliable and quality design 8. Applications- IOT, Consumer, Medical, Industrial, Defense etc 9. Microcontroller Interfacing - STM32, STM8S, ESP32, ESP8266, NXP, TI chipsets etc 10. Wireless Products, Battery Operated, Low Power, Low cost 11. Design Optimization - Could optimize design of any product by at least 25% 12. Design for Quality, Design Review 13. PCB Prototyping, Contract Manufacturing 14. Firmware Development - ARDUINO, C, C++ etc 15. Enclosure Design, 3D Printing, Sheet Metal, 16. Production Support 17. EMI EMC Compliant Design - RE, EMHF, Surge, EFT, Burst, Impulse, 35KV 18. Standards Experience - UL, CISPER, CE, Please contact me if you would like to develop a robust and reliable product If you are looking to bring your idea to life, contact me :)

I am a dedicated CAD and PCB design specialist with a strong background in creating precise, functional, and innovative solutions. I help clients transform their ideas into reality through professiona... Read more

I am a dedicated CAD and PCB design specialist with a strong background in creating precise, functional, and innovative solutions. I help clients transform their ideas into reality through professional 2D/3D CAD modeling, product development, and PCB layout design. With expertise in industry-standard tools such as AutoCAD, SolidWorks, and Altium Designer, I ensure that every project meets high standards of accuracy, manufacturability, and efficiency. My focus is always on delivering high-quality designs on time while maintaining clear communication throughout the project.

Scanotrek is a prominent company that specializes in providing outsourcing services across diverse fields. We are driven by a team of young and dynamic professionals who leverage innovative ideas to s... Read more

Scanotrek is a prominent company that specializes in providing outsourcing services across diverse fields. We are driven by a team of young and dynamic professionals who leverage innovative ideas to solve complex problems and deliver efficient services with quick turnarounds.

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-effic... Read more

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-efficiency SMPS designs (buck/boost converters, GaN/SiC integrations) and mixed analog/digital circuits, like ADC/op-amp interfaces for sensors and IoT prototypes. I’ve routed dozens of boards where EMI control and thermal management aren’t just checkboxes—they’re what keeps your device reliable from prototype to pilot run.