Description:an iphone 5 / 5s case that will display a secondary screen on the back
approximate dimensions: .5" x 5.5" x 2.4"
Wants:-has to be reminiscent of apple design
-must incorporate a shiny plastic screen "cover" over the back screen . see attached photo for inspiration
-looking for clean design
#1 iPhone 5s case by Buwanguzi Yusuf
Similar Contests on Cad Crowd
NoGoer - 3D Printing friendly Design for Kickstarter Project
Designed a product which is planned on being launched on Kickstarter. Electronics are complete, but an enclosure 3D model needs to be designed so a prototype can be 3D printed. Finally, the 3D model would need to be create with draft, fillets, and other injection molding requirements.
Parametric 3D Industrial Design
The item that will be called “pin” from now on in this document, should work as a fashionable hook to be attached to both a towel an the sand of the beach, so we ensure that the towel will keep its perfect position despite the wind or any other common adversity. There are already similar objects in the market that fulfill this objective as it can be seen in the images below (the technology to fix/tie/hook the towel to the sand could be different than the one shown in the images, we are opened to develop a new/different ways to fix the pin. That is the key point of this project.)
Toy siren whistle modeling in Autodesk Inventor
Existing pneumatic mouth-blown siren whistles need a large volume of air at a fairly high pressure in order to produce a noise. Project Goals: Create a siren whistle model assembly (rotor, stator(s), housing) in Autodesk Inventor that that I can 3D print (I have Inventor myself, so I can modify part/assembly constraints and export STL for 3D printing) and I can experiment with the effect of changing constraints such as: different part/assembly sizes, number of rotor vanes, angle of rotor vanes, position and number of stator openings, etc. Ideally, the provided model with the default constraints produces a siren noise that uses less volume and pressure when blown through than existing products (such as those depicted at http://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=whistle+lips and on attached image). The model should also be moldable and assemble-able using conventional plastic production manufacturing methods. Provide constrained Inventor files upon completion. It is anticipated that reduction in size of the existing approach should produce the desired result. Higher pitched frequency than that produced by current commercial versions is OK. I've also included 2 photos of a: 1) stator/retention element (with round holes), 2) rotor and 3) stator/housing (red) from a "lip whistle" siren toy.
This is an industrial design for a hospital wall sensor with display, lights, and a button. The description of the project is contained in the attached file.
I do not have experience with this but I need to create a small in store display that represents my brand and relays information on how our personalization/ monogramming process works. This is something that you would find in boutiques sitting on a shelf or small table. (around 13" wide and 20" tall) There needs to be a section that can hold a set of plastic sheet cards (about 8.5 x 8.5 inches) that will have monogramming font examples. The customer would use these plexiglass sheets and hover them over the actual products that are in the store to help them visualize what their monogram will look like. It would also have an area that can show a single representative product that can be updated. I am thinking either a shelf where the store can place a small item such as a luggage tag or small cosmetic bag that is already stamped for viewing (no larger than 8" x 5" x 3: The item needs to be free standing and able to be easily shipped.