Small Kitchen Device / Safety Seal OpenerBlind
in
3D Modeling Design
held by
alexg7504
Last seen:
TIME REMAINING: 18 days, 14 hours
-
Open
-
Choosing Finalist
-
Ended
Description:
Project Overview: We’re seeking a skilled freelance 3D product/industrial designer to create a prototype for an innovative kitchen device. The product is designed to simplify opening the safety seal found on the INSIDE of mainstream brand seasoning containers by placing the device on top of the bottle (DOES NOT CUT THE WRAPPER ON THE SIDE OF THE BOTTLE). The device should be user-friendly and ergonomic. Please use the provided mock up as a foundation. This prototype will be used for future mass scale production. Our team doesn’t have a product design background, so we appreciate guidance turning this idea from concept to reality.Description:
The product is a grinder look alike item that attaches to a seasoning bottle cap to break the safety seal. While some devices have an “e-z peel seal” most are left at user discretion to open. The blade positioning is still flexible in concept. While the initial idea shows horizontal blades, we're open to other configurations as long as the design is practical and easy to use.
Wants:
Wants:The device should accommodate for the most general size seasoning bottles (McCormick & Nature Made). Please verify our measurements, example below:
McCormick/ Natures Made lids fit a 1-3/4” diameter top
Neck size of jar without lid 1-1/2” or 43m
Please message us if you have any questions for more specifics.
Don't Wants:
Don't Wants:Items that stray too far from the original design mock up.
PLEASE REFER TO MOCK UP ATTACHED BEFORE ADDING ENTRIES.
Prepaid PrizeEntries
#22 Watchme-062125
by CUONGNGUYENVANDUY
Hidden design
Download Files
#21 Safety Seal Opener
by sherifelsheikh
#20 Small Kitchen Device / Safety Seal Opener
by Kzswara
#19 Safety Seal Drawing
by LankyFellow
Hidden design
#18 Small Kitchen Device Safety Seal Opener
by AsadAlishar
Hidden design
#17 Safety seal opener
by Sena
Hidden design
#16 Small Kitchen Device / Safety Seal Opener
by Kzswara
Hidden design
Download Files
#15 Small Kitchen Device / Safety Seal Opener
by Kzswara
Hidden design
#14 Seal Opener - Entry 1
by Inerapello
Hidden design
#13 Safety Seal Opener
by Manning
Hidden design
Download Files
#12 Safety Seal Opener
by sherifelsheikh
Hidden design
Download Files
#11 Smale Device Proty
by Manp
Hidden design
Download Files
#10 SealSlicer
by sonuc2
#9 Seal Opener
by KennethK
Hidden design
Download Files
- 3D Solidworks 2025 — SO ASSY
- 3D Solidworks 2025 — BODY MOLD
- 2D & 3D Modeling Solidworks 2025 — GRIP
- 2D & 3D Modeling Solidworks 2025 — TRING
- 2D & 3D Modeling Solidworks 2025 — SO BODY
- 2D & 3D Modeling Solidworks 2025 — SO ASSY
- 3D Solidworks 2025 — GRIP
- 3D Soildworks 2025 — TRING
- 3D Solidworks 2025 — SO BODY
#8 Small Kitchen Device / Safety Seal Opener
by randym3
Hidden design
#7 Safety Seal Opener
by sherifelsheikh
Hidden design
Download Files
#6 Seal opener
by MécaCim
Hidden design
Download Files
#5 safety seal opener
by clintsar
Hidden design
#4 Safety Seal Opener
by Sujit_Karmakar
Hidden design
Download Files
#3 spice bottle
by bahrid
Hidden design
Download Files
#2 Safety seal opener
by yashwant
Hidden design
Download Files
#1 Lid cutter with adjustable cutting dia and a folding blade for safe storage
by Madcat_29
Discussion
Is this design intended to be 3D-printed, or injection molded? Also should it consist of one single part, or is an assembly of 2-3 parts sufficient?
Are you wanting to utilize an actual cap from the bottles? So a blade insert then a silicone piece that goes over it? Or are you going to mold your own body?
We decided to go a different direction and will not be pursuing an option that&
;s adjustable like the last contest. The dimensions and specifics have been listed. If you have any additional questions please let us know.
;s adjustable like the last contest. The dimensions and specifics have been listed. If you have any additional questions please let us know.
You already held the same contest 2-3 months ago. Then why this? or If I am wrong then please explain the difference between both contest.
Hi, i was wondering you want one product to fit different size jars right? and do you have a particular cutting blade/razor in mind you&;re planning to use?
;re planning to use?
Similar Contests on Cad Crowd
SuperSuv to be hand built for personal use
Off/On Road Super SUV, 3 seater Central driving position like a Mclaren. Rear engined, removable roof which when not in use goes over engine bay. 26 inch rims. Very clean lines. Will use donor lights (pictures included in files). Car must be dramatic with very clean simple lines. Interior must be very simple and clean lines.
I have uploaded many files for inspiration. Countach for rear. Corvette for door treatment. White lotus for air vents. Diablo for roof and body lines.
Jowalla Konnekt
we are looking to design a casing that will hold a BLE chip and NFC tag the product will be adhered to or clamped onto the likes of entrances to malls, bus stops , inside of taxi cabs, on board trains and buses and adhered to ATM machines.
3D Modeling and Roof Design
I would like an exterior and roof designed based on my floor plans. Project MUST be done in Chief Architect. Looking for a modern style home, shed roofs, similar to the contemporary home on our website http://www.inartifex.com/#!untitled/zoom/cqxa/image1ido
Material can be a mix of stucco, board and batten, limit the use of stone as the home is budget conscious.
Feel free to be creative. You do not need to use the existing material etc.
KLEIN 2-Way Radio
This is a small desktop 2-way radio. Instead of having it on your hip, or a big bulky dispatch radio, this is the size of a portable radio in a desktop box.
Bas Relief Panels
Create bas relief panel models to be CNC routed from MDF sheet. I will provide exact panel dimensions, sketches of the design and images to be modeled. Photos of similar examples attached.
khriss