Jowalla Konnekt

in 3D Modeling Design held by Jowalla
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
we are looking to design a casing that will hold a BLE chip and NFC tag the product will be adhered to or clamped onto the likes of entrances to malls, bus stops , inside of taxi cabs, on board trains and buses and adhered to ATM machines.
Wants:
we are looking for a striking design that will draw people to the device. clear channel currently have a concept here www.clearchannel.ie/products/Connect-Mobile-Platform

this does not have a BLE chip inside but does have NFC and QR. This is a perfect example of a product that is durable and cannot be tampered with easily such as being pulled off or stolen

I want to have the files sent to me so that we can print here at a local 3d printers so all the files i need to do this are required

The device will need to accessible at the back , front or side so that battery can be changed in BLE chip (it is a coin battery)
Don't Wants:
i don't want a product that is not durable
Ask for Sample:
yes
Software:
  1. .VRML (x.wrl) .STL (astl, ast) .IGES .3DS .rvt .dgn .skp .3dm .Ply .Obj .Fbx
Additional Information
* I would like to get a concept ready without the integration of the BLE chip, this means that i want our designer to design an updated version of the clear channel concept www.clearchannel.ie/products/Connect-Mobile-Platform

It doesn't have to be the same shape all it needs to have is:

1. an NFC tap here
2. a qr code with "add to apple passbook & "add to google wallet icons
3. the centre piece to allow people read about what this device will do for them

Lets get this done today , i want and need to print off a demo of the design

Entries

= Buyer's Rating
#12 nfc by vinya
May 2, 2014 15:03
#14 nfc by vinya
May 6, 2014 11:19
#2 JUST A PRE MODEL ONLY by Zest !3laster
Apr 18, 2014 4:43
#22 nfc by vinya
May 16, 2014 14:58
#19 design 1 by ezer153
May 8, 2014 5:59
#18 nfc by vinya
May 8, 2014 5:09
#17 Code reader by AntonCatalin
May 7, 2014 17:36
#16 NFC by vinya
May 7, 2014 14:52
#15 NFC by vinya
May 7, 2014 8:40
#5 BLE box by yrraf
Apr 22, 2014 18:34
#1 BLE chip inserting case by selva
Apr 16, 2014 9:51
#10 NFC by vinya
May 1, 2014 11:06
#4 Jowalla Konnekt by Keep
Apr 18, 2014 22:39

Discussion

Zest !3laster

Designer

Fri, 18 Apr 2014 14:51:14 +0000
Otherwise i can make screw locking instead of keyhole

Jowalla

Buyer

Fri, 18 Apr 2014 12:29:18 +0000
Too clunky

Zest !3laster

Designer

Fri, 18 Apr 2014 10:59:59 +0000
How about Lock&Key Mechanism ?

Jowalla

Buyer

Fri, 18 Apr 2014 09:32:40 +0000
The dimensions for the ble chip are 30,5 x 30,5 x 10,2 mm

Jowalla

Buyer

Fri, 18 Apr 2014 08:20:59 +0000
there may also be an opportunity to incorporate a small solar panel on front to power the 3v BLE chip for the outdoor unit

Jowalla

Buyer

Fri, 18 Apr 2014 07:58:25 +0000
in terms of the NFC chip we are simply for prototype using an NFC sticker http://rapidnfc.com/item/182/on_metal_nfc_tags_tab_tap_here_ntag203

This will be adhered to the face of the plate, so the only integration into the backside of the plate will be the BLE chip. Engineers will need a way to replace the battery in this chip so the challenge here is how do we make something that can't be tampered with but can be opened by staff

Jowalla

Buyer

Fri, 18 Apr 2014 07:43:46 +0000
Material will be PLA and file should be an .stl file

Zest !3laster

Designer

Fri, 18 Apr 2014 03:22:02 +0000
just tell nfc chipset size and overall size of the case you want

Zest !3laster

Designer

Fri, 18 Apr 2014 02:58:08 +0000
material ?

Jowalla

Buyer

Thu, 17 Apr 2014 17:52:07 +0000
i am open to either, but we need to remember it will need to be opened to change the batteries each few months

Zest !3laster

Designer

Thu, 17 Apr 2014 17:47:42 +0000
How you are going to adhere it ? Screw or gum ?

Jowalla

Buyer

Wed, 16 Apr 2014 18:53:09 +0000
Will be printing final job on a Cubify 381000 2nd Generation Cube 3D Printer so please ensure files are created for the formats this printer uses

Jowalla

Buyer

Wed, 16 Apr 2014 17:46:35 +0000
The ble chip is 2 inch x 2 inch square and 1 inch in thickness so it's not the size of a SIM card but of course could be slid in like a SIM card

Jowalla

Buyer

Wed, 16 Apr 2014 17:40:25 +0000
Yes for the casing which will incorporate the BLE chip and battery the NFC chip , the front facing panel will need to have color print showing the different call to actions

selva

Designer

Wed, 16 Apr 2014 09:53:07 +0000
you want only the casing design right?

Jowalla

Buyer

Wed, 16 Apr 2014 08:16:23 +0000
The most important thing for this product is how it is going to be adhered to a fixed object. If you think about this being fixed to a bus stop or an ATM machine it needs to be clear to a passer by that may want to break it or steal it that it is futile.

There will also be situations where this product will be inside , such as inside an Uber cab or on board a bus or train so think about both scenarios .

It may also be good to think about landscape and portrait versions.

The info contained all the front will need to be legible

The NFC section will need to have a Call to action the same as clear channels (tap your device) the QR code will have add to Apple Passbook or Google Wallet

Similar Contests on Cad Crowd

Angled Keyboard Slide
The design requires a clean simple method with minimized parts and manufacturing costs. Product is low volume, 250 to 500 pieces per year. We are interested in minimizing capital tooling costs. Design challenge is to design a keyboard slide platform that sits at a 32.5 degree angle (see attached documents). Keyboard slide needs to easily lock in upward position when not in use, and needs to easily be released and slide downward when in use. The keyboard slide is on a cart platform, so when the cart is being moved around, if it gets bumped, we do not want the keyboard slide to dislodge and slip into the down position.
Hydro-cooler bath CONVEYOR project
Project is to design a conveyor system to transfer a range a products into a hydro-cooling bath, and then transfer the product through the bath and out the other end. Attached is a some more notes of the project and images of the products. The contents of the Pails and Bladder is hot Jams and Sources etc. Currently we don't know the thickness of the bladders when fill of the products but we can find this out once we have awarded the project. The attached files are only ideas from our customer, they would prefer to have the maximum time of immersion in the bath. Max floor space available is 8m, so as close to 8m of immersion would be ideal. Someone that has done work with Hydro-cooling bath conveying or works for a company that builds this type of equipment will be a great help. Please let us know if you require more information from us before taking on this project.
Large 3D bookshelf backstop
Inspired by the historical visual progression of mainboards, we are looking for an innovative design to use as the back of a large shelving unit. We are looking for a design to go in a display case. The display case will then be used as a holder for glass shelves. Think of it almost like a glass bookshelf. Except, instead of the back being a cheap piece of board held on with tack nails like a shelf from IKEA, the back will be the design you come up with. Dimensions: 8ft wide 3ft high 1-3in deep The case is being used to display tech items. So we would like the design to reflect technology. Think mother board but on our scale. The original thought was to collect old motherboards, including ram and cpus. We were then going to lay them out on a 8x3 piece of plywood and glue them. Instead of this, we now want to get a design that a CNC machine can make. Material used: Wood and old metal. The design should induce a feeling of technological progression. So from left to right the design should transition from old circuit board tech, to current tech, to possible future tech (this part is open for interpretation) As an example, in the attached picture, the green part is what we want to replace with our 3D circuit board idea. Please note that the picture is just one from google and does not represent the actual shelf we are building The entire shelf will sit on top of a table, meaning that it will be at eye level for the average person.
The Gift Box
I'd like to have several tuck and fold boxes designed to look like elegantly wrapped gifts with nothing but the printed box and I would tie a ribbon around the box. The box in and of itself will have a glossy finish - but it should not look so much like a typical branded box - but should make the recipient feel like it is a beautiful gift. The use of simplicity and bold graphics to achieve a striking effect is key. It would be nice if the inside of the lid had a color and graphic when the user opens it. Inside the box will be a green and white marbled tissue paper (file attached). So the box needs to compliment this tissue paper and work with brand assets. I will be printing with Packlane.com so you can see how their box prints look. I have attached a sample of what a "tuck and fold" box looks like.
IEM True Wireless Earbud Design
We want a simple, firm, premium design for our wireless earbud with a case to charge them. It should represent all-in-one, solid, strong, high tech, formal, vintage style. Type: In Ear true wireless earbuds Target Audience: 20- 40 year olds Competitors: Enclosed in attachments Design: No wire, All-in one button, Volume Button Material: Plastic and Partially Metal Dimensions: Maximum 15 X 25 X 25mm Specification: Bluetooth: 4.1 Driver unit: Maximum 9mm Any software is acceptable, if STL format file can be provided. Any further questions, please feel free to comment.