Industrial Design of a Hand Pulse Detector
in
3D Modeling Design
held by
lesterngbp
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We are looking for a industrial design (outlook) of a hand pulse detector. This device will consist of the following.1) Two metal plates on the device that will come in contact with hand when grip on it. This will form a closed circuit between the plates and thereby detect the electrical pulse from the hand (refer to attached for the existing device). Ideally the area of each contact surface of the metal plate should be more than 2000 square mm.
2) A micro USB port for charging the battery.
3) Power Indicator
4) ON/OFF switch.
Internal design of the device is not necessary but must cater enough room to house the below
1) 1500 square mm X 1mm (thickness) PCB
2) 750 square mm X 4mm(thickness) battery.
The design shall be in 3D CAD.
Wants:
- Think out of the box, and open to any type of style. No need to follow the existing design (see attached)- Ergonomics, easy of hold and cater to all sizes of hand.
- Aesthetics pleasing in term of form & color, and originality are to be valued. Visual design is important here. IT MUST BE COOL !! - we want to evoke a visceral reaction to the device
Don't Wants:
- No sharp or clunky edges.- Non-manufacturable designs and complex designs
- Cheap plastic look & feel
Software:
- Any 3D CAD
Additional Information
There will not be a cable connecting to the device, only the USB port for charging. The size of the device need to be portable.Please note that we are looking for something that think out of the box, and open to any type of style. No need to follow the existing design. It can be like a shape of pebbles stone or something ergonomically friendly that can grab around. Important thing is it must look cool - we want to evoke a visceral reaction to the device.
It would be good to have an illustration to show that the size of PCB and Battery can fit into the device.
Prepaid PrizeEntries
#91 Onigiri
by Ridwan Sept
Download Files
#98 Amana V2
by REDA
Download Files
#103 3pulse
by Yanu
Download Files
#104 Hand pulse device
by kiome_GM
Download Files
#111 Hand Pulse Detector V1
by DeBasstyan
Download Files
#112 Hand pulse Detector
by SaketCad
Download Files
#113 Industrial Design of a Hand Pulse Detector
by sherifelsheikh
Download Files
#117 Pulse Detector
by Concadd
Download Files
#118 Pulse Detector
by Concadd
Download Files
#120 Hand pulse Detector
by SaketCad
Download Files
#122 Hand pulse detector
by Jodi
Download Files
#123 Hand pulse detector
by Jodi
Download Files
#127 CONCEPT 2
by KP HARISANKAR
Download Files
#129 Hand pulse detector
by DeBasstyan
#2 Hand Pulse Detector
by NabilZer
Download Files
#4 thermoHand Pulse Detector
by NabilZer
Download Files
#8 Pulse Detector
by Concadd
Download Files
#11 Pulse Detector by Hassaan v1.0
by hassaan
Download Files
#12 Hand Pulse
by Liviu_B
Download Files
#29 Hand Pulse Detector
by JoelL99
#39 RAW
by Adam
Download Files
#43 pulse detector
by Nikhil Katkar
Download Files
#89 Hand Exercising Type Hand Pulse Detector with Maximum Contact Surface to Plates
by PRANOY K P
Download Files
#92 HPD
by Zulfadzryl
Download Files
#114 HPD Final Stone
by REDA
Download Files
#6 PULSE DETECTOR
by Adam
Download Files
#14 Hand Pulse Detector Concept 1
by Pablo Gosso
Download Files
- Luxion KeyShot — Hand Pulse Detector Conept 1 Panel 1
- Luxion KeyShot — Hand Pulse Detector Conept 1 Panel 2 Button Detail
- Luxion KeyShot — Hand Pulse Detector Conept 1 Panel 3 Bottom USB Lid detail
- Luxion KeyShot — Hand Pulse Detector Conept 1 Panel 3 Bottom USB Lid detail 2
- Solidworks 2D drawings — Hand Pulse Detector Concept 1- Pablo Gosso
#22 Pièrre
by REDA
Download Files
#107 hand pulse detactor
by divyang patel
Download Files
#124 Pulse Detector KPK
by Praty
Download Files
#135 Hand Pulse Detector V03.0
by N-Design
Download Files
#136 EGGY
by Ridwan Sept
Download Files
#137 Industrial Design of a Hand Pulse Detector
by sherifelsheikh
Download Files
#138 Not For Sale
by REDA
Download Files
#139 Dan2JCad Hand Pulse Detector 1.0
by dan2jcad
#140 Dan2JCad Hand Pulse Detector 2.0
by dan2jcad
#141 detailing entry 125 - by Adriano Ordoz Barissa
by Adriano Ordoz Barissa
#143 Concept 100#
by Pablo Gosso
Discussion
Showing last 20 comments - View All
Congrats to Winner& Cadcrowd
Apologies, no more new submission will be considered.
Those with Nominate or with 4 stars are qualify for the final round selection and you are welcome to refine your design with more details like the manufacturing consideration or material selection.
Those with Nominate or with 4 stars are qualify for the final round selection and you are welcome to refine your design with more details like the manufacturing consideration or material selection.
How do we know the shortlisted candidates.Will the client PM them?
Thanks for all your submission and appreciate your time and effort put in.
As of now, I have shorted listed for the winner. No new submission will be considered as the contest is closed. The reason for the extension is to let the short listed designer to have the time to refine their design as this content start till now is very short, only weeks till now.
Let me know if you have any question or concern. Thanks
As of now, I have shorted listed for the winner. No new submission will be considered as the contest is closed. The reason for the extension is to let the short listed designer to have the time to refine their design as this content start till now is very short, only weeks till now.
Let me know if you have any question or concern. Thanks
and 
is exactly a same one find the mistake
![;lzsvpja-] bja]=](https://cdn.cadcrowd.com/avatars/31/40/13140.1502398653.jpg)
I agree with Adriano 135 entries surely one of them is good enough to be selected. Cadcrowd should be charging money for an extended contest..after all, time is money.
I do not think it's right to postpone the challenge again.
Everyone here has put a lot of effort into their designs, based on a predetermined deadline.
If a desired product did not appear yet, you should give better feedback as to what you are really looking forward to seeing.
I bet everyone here agrees with what I'm talking about.
Everyone here has put a lot of effort into their designs, based on a predetermined deadline.
If a desired product did not appear yet, you should give better feedback as to what you are really looking forward to seeing.
I bet everyone here agrees with what I'm talking about.
Looking forward to your feedback to develop the concept
Hi
Please rate my last design so i can improve
Please rate my last design so i can improve
Nice Cristiano, really unique design.
Good try. Put more profile detail and enhance blending of the components in the device if possible
() Complicate profile and need to put more thought on the details - e.g no metal plates
Hi Adam,
The thickness of battery and PCB is petty much fixed as stated. The area is given as a guide for you to cater enough room for the component, so it can be any size as long as it is within the area (sq. mm) specified.
The thickness of battery and PCB is petty much fixed as stated. The area is given as a guide for you to cater enough room for the component, so it can be any size as long as it is within the area (sq. mm) specified.
Would it be possible to get the width, height, and depth of the battery and the width and height of the PCB, or can it be any size as long as it is within the sq. mm's specified ?
Size and detail need to improve.
Ergonomics is a concern when griping due to the profile. Aesthetics need to improve.
Ergonomics is a concern when griping due to the profile. Aesthetics need to improve.
Redundant features is undesirable, make simple. The purple portion if removed will look better.
& 17, good try but aesthetics still not there yet.
Need to work on aesthetics, no clock please.
Similar Contests on Cad Crowd
Digital LCD Name Tag for wine glass
We are developing a digital “Name Tag” (LCD screen) for wine glasses that will communicate with a mobile app. so people will be able to communicate with the tag via their smartphone and find their glass in case they can’t tell which wine glass is theirs...etc.
We are looking for few design concept options for a prototype 3D design that we will print.
ecig design
we need a ecig design, now all ecigs design are boring, all MOD looks the same, ego style all looks the same.we need a unique one,
Where there's muck there's brass
An alternative to picking up dog dropping with plastic bags.
A cheap, easy to build, bio-degradeable design.
It should, with a minimum of moving parts, (ideally 1-2 piece cardboard structure), pick up and enclose droppings. Should also include built in handle (reasonably distanced from holding section)
Simplicity is key. As will need to be able to produce cheaply in large volumes.
MUST BE MASS PRODUCEABLE for cost in the region of $1-2.
Chocolate Melangeur
I need a stone mill grinder powered by an electric motor. There will be two granite stones weighing circa 10 kg each that will spin on top a granite base, which weighs 15 kg. The base will be at the bottom of a stainless steel pan, which will also contain the 2 stones inside it. The pan will spin by the action of an electric engine/reductor, as its base will be locked on top a metal spinning disc connected to the engine/reductor shaft. The two stones will spin in opposite directions by the action of the spinning base. The stones need to apply a force on the base in order for them to fine ground cocoa bits. In order to that, a system of coils needs to be built so that a force can be applied on each stone. The stones and coil system will have to be easily detachable from the pan, as well as, the pan itself from the disc that holds it, so that chocolate can poured in another recipient.
Leaside Project
I am building a new home and require innovative interior architectural design options ( kitchen, family room, living room and powder room) that will accommodate an exterior elevation that is already defined. One of the most important aspects to this assignment is the location of the interior foyer relative to the location of stairs that go up to the 2nd floor and down to the basement. The desired design of the foyer is to be defined in terms of its presence but not in a manner that it takes away from the interior space in a significant manner. Once a 1st floor layout is approved, the need to prepare a modern and eye catching interior design (with furniture, crown holding, tray ceilings, wainscotting, etc. ) with photo like renderings will be required. I have attached the exterior elevation (which is reversed to the actual location of the garage) but it provides a sense of the foyer location. I have also provided a PDF of the ground floor footprint that we have to work with. The dimensions of the foot print is fixed. This ground floor plan design is not the optimal in terms of the foyer so we are looking for innovative designs that will fit within the plan dimensions and our needs..
REDA
Designer