kick scooter

in CAD Design held by Alberto Rey
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
I am looking to create an elegant and standout kick scooter that is ultralight and foldable, ( easy to carry on Subway/Bus ).
This product is to be marketed towards young adults and working proffessionals as a legitimate and sleek transportation tool. Getting you quikly and with very little effort from your house to the subway, grocery store or for a spinn with your dog. Both, the handlebars and the mast should be retractable and/ or foldable. The deck should be able to handle up to 250 pounds. The scooter should have propper brakes with calibers or disks rather than a simple step-on system. It should also feature a set of lights that will be powered by the wheels rather than a battery and needs to have a light and simple suspension in front and rear. The wheel design needs to be hubless.
Main competitors:
www.globber.com/en/scooters/my-too-kleefer
www.microkickboard.com/suspension-scooter
goped.com/scooters/push/know-ped/
Wants:
Approx measurements
Width of deck: 6 - 8 inches
Lenght of deck: 14 - 17 inches
Wheel diameter: 7 - 8 inches
Wheel width:1 - 1,5 inches
Handlebar width: up to 18 Inches
Handebar height: adjustable up to 46 inches from ground.
Colors are up to you. Keep in mind that most competitors offer only one or two boring choices. Be creative.
Don't Wants:
Anything that looks clunky or as if it were designed for children. Visible brake cables.
Ask for Sample:
Brief samples would help me gauge each designer's skills. I plan on working on a fully electric version at a later point with same designer.
Software:
  1. SolidWorks
  2. AutoCAD
Additional Information
Hi there everyone.

A quick heads-up to all you talented designers.
Considering that I've had now so many great designs and that time is of the essence, I will cut the contest short by one week. Wednesday the 30th will be the last day anyone can send in drafts.
Until then, thanks to all of you for the amazing amount of hard work!

Best of luck, Alberto Rey

Entries

= Buyer's Rating
2nd Winner
#63 Kick scooter #5 by Aminegn
Nov 30, 2016 2:29
3rd Winner
#81 kick scooter v2 by MR. CAD DESIGNS
Dec 1, 2016 4:04
4th Winner
#7 Scooter V2.1 by ODBDesign
Nov 9, 2016 21:39
#16 Kick Scooter by ;lzsvpja-] bja]=
Nov 12, 2016 18:01
#24 Kick Scooter by Concadd
Nov 15, 2016 17:56
#26 Kick scooter #2 by Aminegn
Nov 15, 2016 21:45
#28 Kick Scooter by Concadd
Nov 16, 2016 15:42
#33 Kick scooter #3 by Aminegn
Nov 21, 2016 0:00
#34 Kick scooter by Aminegn
Nov 21, 2016 21:50
#39 Kick Scooter by Concadd
Nov 25, 2016 6:59
#51 Kick scooter #4 by Aminegn
Nov 28, 2016 1:48
#47 Kick Scooter V3 by REDA
Nov 27, 2016 0:53
#21 Kick scooter #1 by Aminegn
Nov 14, 2016 1:46
#4 Scooter by ODBDesign
Nov 9, 2016 14:01
#5 Scooter V2.0 by ODBDesign
Nov 9, 2016 17:19
#73 kich scooter 3 by REDA
Nov 30, 2016 13:48
#79 Kick Scooter REV.5 by Michael Dimou
Nov 30, 2016 21:07
#12 Scooter V2.2 by ODBDesign
Nov 11, 2016 11:15
#57 kick scooty by shantanu
Nov 29, 2016 2:05
#85 Kick Scooter - 2 by sadzip
Dec 1, 2016 14:59
#52 Draft1a by jnatzic
Nov 28, 2016 10:14
#53 Draft1b by jnatzic
Nov 28, 2016 12:30
#54 kick scooty by shantanu
Nov 28, 2016 15:46
#55 Kick Scooter REV.4 by Michael Dimou
Nov 28, 2016 21:57
#75 kick scooter by budiawan
Nov 30, 2016 16:06
#56 K Scooter by REDA
Nov 29, 2016 1:26
#66 kick scooty by shantanu
Download Files
Nov 30, 2016 7:32
#74 Kick Scooter - 1 by sadzip
Nov 30, 2016 15:34
#61 Kick Scooter by Otto Katz
Nov 29, 2016 23:11
#62 BlueBird Kickscooter by Oleksiy
Nov 29, 2016 23:25
#69 kick scoot by shantanu
Nov 30, 2016 11:04
#68 kick scooter by budiawan
Nov 30, 2016 10:02
#67 kick scooter by budiawan
Nov 30, 2016 8:27
#64 kick scooty by shantanu
Nov 30, 2016 2:47
#29 Kick Scooter by SaketCad
Nov 18, 2016 9:53
#13 Revision of the previous model by Creative Paul
Nov 11, 2016 18:45

Discussion

Showing last 20 comments - View All

;lzsvpja-] bja]=

Designer

Thu, 01 Dec 2016 17:09:51 +0000
Any aspect of my design must not be used and or manufactured in any way and any cad files also must be deleted.

Alberto Rey

Buyer

Thu, 01 Dec 2016 16:53:20 +0000
Hello there everyone,

I would like to thank every single one of you for all your hard work and patience.
It was a pleasure to get to experience the commitment and talent all of you displayed.
I know some of you wanted a bit more time. Due to a time constraint and the amount of participants I had to cut it short.
There were more impressive designs I would have wanted to give a prize to but I'm on a tight budged.
I will certainly keep many you as contacts - by invite only - for any future projects.
Feel free to contact me for any additional questions, suggestions and even criticism.

Thank you again for everything and good luck.

Best, Alberto Rey

REDA

Designer

Thu, 01 Dec 2016 16:48:35 +0000
Hi,
Congratulations to all winners

Michael Dimou

Designer

Thu, 01 Dec 2016 16:44:42 +0000
Congratulations to all designers of cadcrowd and particularly the winners of the competition, was a very interesting project for all of us

Gibbo

Designer

Thu, 01 Dec 2016 13:02:41 +0000
Hi alberto Rey,

Is it possible obtain the feedback for the last two entries?
I think we worked both all night to make them!

Thank you in advance.

All the best,
Gibbo

edward m barnes

Designer

Thu, 01 Dec 2016 12:49:33 +0000
Why was my Declined?
Wed, 30 Nov 2016 20:22:58 +0000
Sorry. just saw additional remarks. :D
Wed, 30 Nov 2016 20:10:15 +0000
Hi Alberto,

Contest page says it will end on 7 Dec. But some guys mentioning it will end tomorrow. Please can you clarify this.

I'm also working on my concept. But still I need time. Thought I have 7 more days :D.
Anyway good luck guys.

Thanks,

praveen_designs

Designer

Wed, 30 Nov 2016 20:04:23 +0000
Got to know about this contest very late. The competition will end tomorrow; submitted only one design. I wish I could submit more. :/

Gibbo

Designer

Wed, 30 Nov 2016 18:06:04 +0000
I hope that you are going to close this contest at midnight, I am about to finish my project.

Michael Dimou

Designer

Sat, 26 Nov 2016 20:03:46 +0000
check the renderings here https://www.cadcrowd.com/gallery/project/kick-scooter%20-%206436

Alberto Rey

Buyer

Wed, 23 Nov 2016 17:19:31 +0000
Hello Ankit,

At this point it can be only a concept, although funtionality should be kept in mind. Once I have a winner, I'll be working with him/her on a manufacturable prototype.
Also, a quick headsup: This contest will end 1 week early - the 30th.

Thanks!

praveen_designs

Designer

Wed, 23 Nov 2016 16:00:21 +0000
Hey Alberto!
You need a concept or a manufacturable design with analysis as well?
Tue, 22 Nov 2016 00:32:36 +0000
Hello, what an interesting theme!, unfurtunatly I can offer only Rhino 3d native or converted file for Solid Works with an translator. Thank you!

Alberto Rey

Buyer

Tue, 15 Nov 2016 19:24:38 +0000
Hi there handsketcher,

I appretiate your comment and will look into it.

Thanks, Alberto
Tue, 15 Nov 2016 19:10:31 +0000
It might be better to pay attention about existing patents of folding bikes. I have seen some folding concepts used here are patented (Priority date 1999 Aug). So this means you can't use the same idea without paying to the original patent holder within 20 years of its validity period.

Alberto Rey

Buyer

Mon, 14 Nov 2016 18:22:55 +0000
Hi fadli,

Asolutely. Go ahead.

Best, Alberto

fadli

Designer

Mon, 14 Nov 2016 14:32:33 +0000
is it allowed to use Autodesk Inventor? FYI, Autodesk inventor is very similar with Solidwork and can be opened directly in Autocad

Alberto Rey

Buyer

Fri, 11 Nov 2016 16:52:57 +0000
Hi Kurniawan,

Thanks for the input.
To answer your question, since this is still a relatively early stage in the contest, I'm more interested in a solid concept rather than a fully functional design.
In regards to the bearing for the wheels, I would certainly prefer a cost contious choice even though the scooter itself will be marketed as a higher end product within my competitors.
Please feel free to contact me anytime and good luck.

Best, Alberto
Fri, 11 Nov 2016 15:19:25 +0000
Hi Alberto Rey.
Are you looking for concept only or fully functional design also? Biggest challenge here is to find cheap and light weight bearing for the wheel. Are you prefer to use custom bearing (need long development with high cost) or want to use off the shelf bearing (for lower development cost).
Thanks,

Best,
Kurniawan

Similar Contests on Cad Crowd

Adjustable Serving Tupperware
In theory, this is very basic. Although I am just a law student and by no means an engineer of any sort. My idea is to create a tupperware that has slits in a grid like form on the bottom and sides. Additionally there would be slits under the lid. With the grid-like slits, one would be able to put inserts in order to separate there food. with the insert going into the bottom, sides and the lid, there would be a nice seal from any liquids or foods mixing with the others. Obviously, the point of the grid is to be able to create different sized servings and adjust them from bouncing around. Basically, one could put a perfect compact cup of rice, another for veggies etc. The preserving tupperware current on the market do not allow this and one has to purchase a thousand of them. My vision is for it to be able 10 inches in length with a 5 inch witch and about 2.5 inches tall. The top of the tupperware and lid should look similar to your standard rubbermaid tupperware. the walls of the tupperware should not be less or more than 90 degrees. The corners and need to be rounded. The slits them selves should not be to shallow, for that would defeat the purpose of them. My estimation is that they would be about .5 centimeters. Because of the slits, the bottom and sides could/maybe/should form a ridge like surface. (think of ruffles) Lastly, the ridges, or slits should be continuous, at least in my mind around the entirety of the tupperware, which means the lid will need to account for vertical ridges along the walls of the tupperware and still be able to seal it. Although I will not prepay, being the cautious man of law that I am, payment will be given upon the winner being chosen. AND, in the event that my price is significantly low balled and outrageous I will increase it if no one in their right mind would accept it. Thank you.
Multi units
Four story wood frame townhouse style development with parking garage under. 62 x 250 with spans above garage 14 foot with max 19. Floor joists Eng. LBL beams, Exterior stone, have exterior rendering and elevations to start with. Interior layouts already 95%.
Modular sUAS Design
Sub 350mm Foldable, Modular Arm, Battery Pack, and Payload agnostic mounting point UAV. Frame design requires consideration of minimal to no tool required to field assemble. If tools are required, fasteners etc must revolve around capacity of regular multi tool. Design should also approach sub 2 minute field assembly, in a zero lighting environment. Design should be based on additive manufacturing capabilities with carbon fiber as the preferred material for production.
JavanScience Footwear
We are interested in hiring someone who has experience or capability in creating CAD for footwear and footwear-related projects.
Remodelling of sofa-designs & Work-drawings / CAD
- Remodelling of sofa-designs - Renderings - CAD/technical drawings - 3D - Product designer I'll send the models.