Horvitz residence front yard

in Other Services held by Kurt Karl Designs
Contest Closed
Description:
I am submitting this plan to the county for permits for entry pilasters and electrical and need to remove any items that are not in scope. Please trace/add the following:
1. House
2. Property lines with dimensions
3. Hardscape outlines ( no need to fill in with stone detail)
4. show dimensions of pilasters street to pilaster face
5. show street names
6. re label Koi pond. New label, "Fountain with 18" pond"
7. create new scope of work
a. 6' stone pilasters with gate
b. misc. electrical outlets for fountain and creek pump
8. show sediment and erosion control
9. add handouts to plan.

ELIMINATE:
1. All scope of work other than 6' stone pilasters at drive and pedestrian gate
3. All plant material
4. Koi pond

I will also need a cover page
Wants:
simple cad drawings
Software:
  1. not sure...

Entries

#4 Horvitz residence front yard by Bodhayan
This Plan drawing is made by Autocad 2016 with adobe pdf format
more
Sep 26, 2016 13:41
#3 Hovitz residence front yard layout by Tariq72
Horvitz residence front yard layout plan as per instructions
more
Sep 25, 2016 9:25
#2 horvitz residence front yard by USLANDS2CAD
Hello~
The Cadcrowd.com customer service has cleared the issue.
Please find attached, revised PDFs of the Horvitz Residence Front Yard per your recent comments and changes.
Should you need anything else, do not hesitate to ask.
Regards,
Mark
more
Sep 14, 2016 12:56
#1 2-Dimensional by USLANDS2CAD
Hello~
Please see the attached PDFs, drawn per your comments and sketch (filename: HPSC1162), as requested.
Should you have any question, do not hesitate to ask.
Sincerely,
Mark
more
Sep 11, 2016 4:41

Discussion

Sat, 10 Sep 2016 14:13:48 +0000
I can do it for you, but what is the exact price? first I see: under 799 $ and then 120 $. that is to low for technical CAD drawing.
680 $ is the price. I will check it and maybe there are further questions.
Sat, 10 Sep 2016 10:32:22 +0000
hi,
is it a 2D cad project?
Fri, 09 Sep 2016 20:56:42 +0000
sir, do you have other sketches to or is this the only one?

Similar Contests on Cad Crowd

The Aurora Borealis Ranch Project’s floor plan and interior design contest
Hello. I am going to build my 20 acre large luxurious palace with a 10 acre Water Park, a 200 acre Retail Dining district, Farm, Ski Resort, 5 guest houses, A Entertainment/Recreation Complex, And a farm animal petting zoo, and it's all topped off with a Neverland Style Resort with a train station and a playground and treehouse for children. We Definitely need the best we can get to build this Ranch. I will need prople with a Creative Mindset, and With 10+ Years Experience in the Architecture and Engineering to help me out with this project. We need people who can commute to our house so we can discuss the project. if you are interested in helping us out. please let me know Noah J Boyd
BOQ for procurement from existing CAD / drawings
I have an existing CAD drawings for a building consist of 15 floor: we need to list a detailed BOQ from the CAD drawings for all needed fittings , cables , conduits , pipes , accessories ( deep details ) and not the main equipments Electrical drawing: https://www.dropbox.com/sh/x2oqmtutwlzlln2/AAC1RBDzryvYq_rXiT02Ii7Oa?dl=0 HVAC drawing: https://www.dropbox.com/sh/1vgydg266ew415u/AABqOaJr2XclfzBaEy8DS4RNa?dl=0 Plumbing : https://www.dropbox.com/sh/h8xls44k4smo4lp/AABO8IgJA_Tzrpy5qX4K1onua?dl=0 BOQ needed in Excel format
Advice
I just got my drafting and Design associates from ITT-Tech and I'm wondering would it, if at all, be possible for me to start freelancing and if so how? Any advice would be a great help.
Need Licensed Structural Engineer w/ Drafting Skills ASAP
Our current structural engineer is out on emergency medical leave and we are in the middle of construction on a new residential home. Recently during the framing we noticed that the trusses were done incorrectly due to steel erection is part of the building process. Based on that the truss builder has explained that the 2nd and 3rd floor trusses were edited to 24" deep in order for them to work. The steel drawings show the steel is set up for the 2nd and 3rd floor trusses to be 16" deep per building plans. However due to the truss changes, we need the steel set up for the floors edited as the height of the home has changed. Currently the home is at the code maximum height, so the steel has to match up to the truss exactly. This will affect the height of the steel columns as well as the mounting flanges. Need a structural engineer to review and revise what our current structural engineer who is in the hospital has done to ensure steel fabrication and erection plans with connection details are drawn up. We will need all final items in the actual source file, DWG as well as PDF so that they can be printed. Engineer will need to have the ability to update the plans in DWG file for the manufacture and steel fabricators. The updated plans will need to include the steel supply list as well as the connection details of the truss to steel and steel to the truss. This project is on a tight deadline due to we are already in the last framing construction phase. The steel erection is next. All other material is wood on the home. We have the steel files completed by our team which includes the Architect, Architect's Company Structural Engineer and our company Structural Engineer in DWG and PDF to help with this project. The steel is only being used to support the front glass windows on floor 2 & 3 as well as the deck on floor 3, steel is not being used anywhere else. Our files are 2018 DWG and we do not have the ability to change it to any other version.
new designs
When your contest is live, you will see many designs are coming from designers where you can easily preview, give feedback and choose the best design that you need.