I will convert your sketch, old drawing or photo into a 3D CAD model and STEP file
About this service
Need a spare part rebuilt from an old drawing, a hand sketch or a few photos? I model it as a clean 3D CAD solid and give you a STEP file plus a dimensioned 2D drawing you can send to the workshop.
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) with sections and main tolerances
- Unclear dimensions listed on the sheet as assumptions, never guessed silently
Best for: machine parts, flanges, brackets, pump and engine spare parts, marine fittings, old inch drawings converted to mm.
Please message me before ordering and send your drawings or photos (with a ruler or key dimensions): I will confirm scope and price. Files in neutral formats; no stamped or certified drawings.
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) with sections and main tolerances
- Unclear dimensions listed on the sheet as assumptions, never guessed silently
Best for: machine parts, flanges, brackets, pump and engine spare parts, marine fittings, old inch drawings converted to mm.
Please message me before ordering and send your drawings or photos (with a ruler or key dimensions): I will confirm scope and price. Files in neutral formats; no stamped or certified drawings.
Need a spare part rebuilt from an old drawing, a hand sketch or a few photos? I model it as a clean 3D CAD solid and give you a STEP file plus a dimensioned 2D drawing you can send to the workshop.
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) with sections and main tolerances
- Unclear dimensions listed on the sheet as assumptions, never guessed silently
Best for: machine parts, flanges, brackets, pump and engine spare parts, marine fittings, old inch drawings converted to mm.
Please message me before ordering and send your drawings or photos (with a ruler or key dimensions): I will confirm scope and price. Files in neutral formats; no stamped or certified drawings.
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) with sections and main tolerances
- Unclear dimensions listed on the sheet as assumptions, never guessed silently
Best for: machine parts, flanges, brackets, pump and engine spare parts, marine fittings, old inch drawings converted to mm.
Please message me before ordering and send your drawings or photos (with a ruler or key dimensions): I will confirm scope and price. Files in neutral formats; no stamped or certified drawings.
Need a spare part rebuilt from an old drawing, a hand sketch or a few photos? I model it as a clean 3D CAD solid and give you a STEP file plus a dimensioned 2D drawing you can send to the workshop.
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) wit... read more
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) wit... read more
Need a spare part rebuilt from an old drawing, a hand sketch or a few photos? I model it as a clean 3D CAD solid and give you a STEP file plus a dimensioned 2D drawing you can send to the workshop.
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) with sections and main tolerances
- Unclear dimensions listed on the sheet as assumptions, never guessed silently
Best for: machine parts, flanges, brackets, pump and engine spare parts, marine fittings, old inch drawings converted to mm.
Please message me before ordering and send your drawings or photos (with a ruler or key dimensions): I will confirm scope and price. Files in neutral formats; no stamped or certified drawings. read less
What you get:
- Solid 3D model checked against every dimension on your drawing
- STEP file that opens as one valid solid in any CAD (IGES or STL on request)
- 2D manufacturing drawing (PDF and DXF) with sections and main tolerances
- Unclear dimensions listed on the sheet as assumptions, never guessed silently
Best for: machine parts, flanges, brackets, pump and engine spare parts, marine fittings, old inch drawings converted to mm.
Please message me before ordering and send your drawings or photos (with a ruler or key dimensions): I will confirm scope and price. Files in neutral formats; no stamped or certified drawings. read less
Service offer categories
3D Models of Machine Parts
Reverse Engineering
3D Design Services
Software & skills
2d to 3D CAD Modeling
3D Modeling
Reverse Engineering
STEP Files
Technical Drawings
+2 more
This service includes
| Service tiers | Simple $80 | Standard $160 | Advanced $320 |
|---|---|---|---|
| Summary | Single part | Complex part or 3 parts | Small assembly |
| Details | One simple part: 3D solid, STEP file and one dimensioned PDF drawing. | One complex part or up to 3 simple parts: STEP files and PDF/DXF drawings with main tolerances. | Assembly up to 10 parts: STEP, drawings, exploded view with bill of materials. |
| Delivery time | 4 days | 6 days | 10 days |
| Number of revisions | 1 | 2 | 2 |
Member since
November 2026
Languages
Italian,
English
Avg. response time
1 hour
Mechanical engineer: fair Rhino hull models from lines plans and 3D CAD parts with 2D drawings
I turn lines plans, offset tables, sketches and 2D drawings into accurate 3D models, and I show you how accurate they are. Every hull or part comes with a short check report: maximum deviation from your data, plus volume and basic hydrostatics when useful.
I am a mechanical engineer (MSc, 110/110 cum laude, Italy; State Exam for engineers passed). I work in the technical office of an Italian mari... read more
I am a mechanical engineer (MSc, 110/110 cum laude, Italy; State Exam for engineers passed). I work in the technical office of an Italian mari... read more
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More from Mattia G.
More similar services
From
$7/hr
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 3D CAD Design services
- 2D & 3D Design services
- CAD Modeling services
- 3D CAD Modeling services
- 2D & 3D Modeling services
- Engineering Design services
- 2D & 3D CAD Design services
- Drafting services
- AutoCAD services
- 3D Models services
- Mechanical Design services
- Mechanical 3D Design services
- 2D Drawing services
- Design for Manufacturing services
- 2D Drafting services
- 2D AutoCAD services
- Product Design services
- Rendering services
- Architectural Design services
- SolidWorks services
- Mechanical Engineering services
- 3D Rendering services
- 3D Solidworks services
- Manufacturing Drawings services
- 2D/3D AutoCAD services
- Assembly Design services
- 2D & 3D Modeling Solidworks services
- Engineering Drawing services
- Design Engineer services
- Mechanical Engineer services
- Industrial Design services
- Interior Design services
- AutoCAD Mechanical services