Lahore,
Pakistan
Global rank:
1,137
/
152,618
Skill pts: 36
About
I'm a PEC-registered mechanical design engineer working in SolidWorks and AutoCAD. I design mechanisms, enclosures, sheet-metal parts and moulded consumer products, and I hand them over as manufacturing-ready models and drawing sets.
Some of the work behind that:
- Wall-mount control enclosure, seven parts in 1.5 mm steel, built as real sheet metal at K 0.44 so every part unfolds to a laser-cut blank. The wrapper develops to 936.57 mm, matching my hand calculation, and the two side panels share one flat pattern.
- 21-component V8 assembly where bore, stroke, rod length and bore spacing drive the block, crankshaft, rods and all eight pistons, so one input change regenerates the assembly. The piston went through a coupled thermal and structural run in ANSYS: 317 °C at the crown, 237 MPa peak von Mises.
- 10-component rigid flange coupling with a full production drawing set: BOM, section views and dimensioned sheets a shop can work straight from.
- Four-part hand press designed to come off an MJF printer working, in PA12: buttress thread, three-tab bayonet lock and a sliding piston at 0.20 mm radial clearance.
- Parametric planetary gearbox where tooth counts, ratios and carrier geometry regenerate from the input parameters.
What you get: native SolidWorks files (SLDPRT, SLDASM, SLDDRW), STEP and IGES, DWG and DXF for AutoCAD, STL for printing, flat-pattern DXF for sheet metal, and PDF drawing sheets with GD&T, tolerances and a BOM. Models are parametric, so a size change is a dimension edit rather than a rebuild.
I also rebuild parts from a sketch, photo, scan or worn sample into editable CAD, modelled to nominal dimensions rather than traced, so the wear doesn't end up in your production files.
Tell me what the part has to do and how it'll be made, and I'll come back with how I'd take it to production files.
... more »
« less
Some of the work behind that:
- Wall-mount control enclosure, seven parts in 1.5 mm steel, built as real sheet metal at K 0.44 so every part unfolds to a laser-cut blank. The wrapper develops to 936.57 mm, matching my hand calculation, and the two side panels share one flat pattern.
- 21-component V8 assembly where bore, stroke, rod length and bore spacing drive the block, crankshaft, rods and all eight pistons, so one input change regenerates the assembly. The piston went through a coupled thermal and structural run in ANSYS: 317 °C at the crown, 237 MPa peak von Mises.
- 10-component rigid flange coupling with a full production drawing set: BOM, section views and dimensioned sheets a shop can work straight from.
- Four-part hand press designed to come off an MJF printer working, in PA12: buttress thread, three-tab bayonet lock and a sliding piston at 0.20 mm radial clearance.
- Parametric planetary gearbox where tooth counts, ratios and carrier geometry regenerate from the input parameters.
What you get: native SolidWorks files (SLDPRT, SLDASM, SLDDRW), STEP and IGES, DWG and DXF for AutoCAD, STL for printing, flat-pattern DXF for sheet metal, and PDF drawing sheets with GD&T, tolerances and a BOM. Models are parametric, so a size change is a dimension edit rather than a rebuild.
I also rebuild parts from a sketch, photo, scan or worn sample into editable CAD, modelled to nominal dimensions rather than traced, so the wear doesn't end up in your production files.
Tell me what the part has to do and how it'll be made, and I'll come back with how I'd take it to production files.
Experience
- Freelance Mechanical CAD Designer CADCROWD · Freelance Jul 2026 – Present 3 mos Lahore, Punjab, Pakistan Deliver paid SolidWorks and FreeCAD design contracts for international clients: scale collectibles, 3D-printable enclosures and industrial cell layouts. Own each engagement end-to-end without supervision, from brief interpretation and DFM decisions through client revision rounds to verified STEP/STL hand-off within agreed milestones.
- Freelance Mechanical Design Engineer Self-employed · Self-employed Jan 2026 – Jul 2026 6 mos Lahore, Pakistan Delivered independent SolidWorks, FreeCAD and AutoCAD design work for private clients before moving onto Cad Crowd: reverse engineering from photos, sketches and scans into parametric models, production drawing sets with GD&T, and 3D-printable enclosures. Handled each project end-to-end, from brief and DFM decisions through revision rounds to verified STEP/STL and native file hand-off.
- Technical Sales Engineer Minimax Corporation Pvt. Ltd · Full-time May 2025 – Aug 2025 3 mos Lahore, Punjab, Pakistan Owned the full technical-to-commercial cycle for industrial manufacturing clients, from first site assessment through proposal, negotiation and after-sales engineering support. Converted plant requirements into engineered solutions, AutoCAD layouts and bills of quantity, verifying technical accuracy before any quotation was issued. Authored and defended technical and commercial proposals in client meetings, coordinating with OEMs and local vendors to validate scope and pricing.
- HSE Engineer Multi Electromechanical Services Pvt. Ltd · Full-time Oct 2024 – Feb 2025 4 mos Lahore, Punjab, Pakistan Administered Permit-to-Work (PTW) and JSA/TRA across multi-building facilities, holding zero lost-time incidents for the full tenure. Supervised fire and life safety across public areas: extinguisher inspection, emergency egress checks and fire-system surveillance. Ran contractor compliance audits and led routine site inspections, tracking every finding to documented closure. Investigated incidents and near-misses, authored root-cause reports and drove corrective/preventive actions to completion.
- Design Intern - Switch-Gear Design Pak Elektron Limited (PEL) · Internship Jun 2022 – Jul 2022 1 mos Lahore, Punjab, Pakistan Produced switch-gear component designs, layout drawings and assembly views in AutoCAD and SolidWorks, released into the design team's prototype iteration cycle. Compiled technical drawing packs to the team's documentation standard, freeing senior designers from drawing-preparation work during the prototype phase.
Education
- University of Engineering & Technology (UET), Lahore MPhil, Engineering Management 2025 – 2026
- University of Engineering & Technology (UET), Lahore BSc, Mechanical Engineering 2020 – 2024
- KIPS College, Faisalabad FSc, Pre-Engineering 2018 – 2020
Licenses & Certifications
- Registered Engineer Feb 2025 – Present
- Occupational Safety & Health Aug 2024 – Present
- IOSH Jul 2024 – Present
Verified info
- Email address
Stats
1 follower, 0 following
Age: 24
Joined: July 24, 2026
Last seen: October 23, 2026
Area of Expertise
Languages
English Full professional proficiency
Urdu Native or bilingual proficiency
Location
Lahore, Pakistan