Hire Mechanical Engineer Designers in South Africa

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I have significant experience in mechanical engineering and manufacturing principles and have owned and operated by own mechanical engineering business which involved manufacturing and fabrication. I... Read more

I have significant experience in mechanical engineering and manufacturing principles and have owned and operated by own mechanical engineering business which involved manufacturing and fabrication. I produce 3d mechanical designs and drawings utilising strict engineering principles and experience gained from working as a mechanical engineer for 16 years+. Additionally I have a formal mechanical engineering honours degree with very good academic results and was inducted in the Golden Key international academic honours society.

Hello and thanks for reading my Bio. I'm a mechanical engineer with 2D drafting, 3D modelling and CAE experience. My drafting experience include product, prototype and machine design. I design vari... Read more

Hello and thanks for reading my Bio. I'm a mechanical engineer with 2D drafting, 3D modelling and CAE experience. My drafting experience include product, prototype and machine design. I design various products for the Aerospace, Defence, Commercial, Medical, Marine and Industrial sectors. I basically involved in the ideation/conceptual phase, design, prototype and testing of the product. I also have project management experience and often work with startups. Software that I use are AutoCAD, Inventor, SolidWorks, SketchUp, ANSYS, SimScale, FreeCAD, Keyshot, Meshmixer and 3D builder. My curriculum vitae is available on request. Available for any questions. My time zone is GMT+2, South Africa. Thanks for reading.

Rene Kruger is interested in a wide range of mechanical engineering. This love for mechanics and drawings developed through getting employed at a gutter company about 4 years ago. Rene's first major p... Read more

Rene Kruger is interested in a wide range of mechanical engineering. This love for mechanics and drawings developed through getting employed at a gutter company about 4 years ago. Rene's first major project was designing, drawing and assembling a fascia roll forming machine, which was followed by a molding machine as well as a downspout machine. After getting his first freelance request done and paid for, Rene is now setting himself up as a freelance designer on AutoCAD and Solidworks. Rene uses time effectively and works precise. You are sure to be satisfied with his work. Rene Kruger: for all your custom design needs, in a blink of an eye.

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes... Read more

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes working as an Apprentice Fitter and Turner in a Steel Manufacturing Company for over 2 years and then as a Junior Engineer at a Consulting Company for more than 6 years. Currently, I am employed as a Mechanical Draughtsman with MV Switchgear manufacturer starting June 2022. I am a lifelong learner and use my free time to acquire new skills through personal projects. My areas of interest include Mechanical Design, CAD Draughting, Finite Element Analysis, Structural Design, Scripting, and Automation. I am proficient in Autodesk Inventor, AutoCAD, Nastran, ANSYS, VB.NET(i-logic) and Microsoft Office

As a mechanical engineer with over 3 years of experience in NX, Solid Edge, Autodesk Inventor, and ANSYS (FEA and CFD), I excel in CAD design and engineering considerations. I am skilled in manufactur... Read more

As a mechanical engineer with over 3 years of experience in NX, Solid Edge, Autodesk Inventor, and ANSYS (FEA and CFD), I excel in CAD design and engineering considerations. I am skilled in manufacturing processes like casting, 3D printing, laser cutting, welding and machining. I can deliver files in formats such as STEP, DXF, and more.

I am a skilled Mechanical Design Engineer with strong experience in CAD modelling, product design, and 3D visualization. I work confidently with SolidWorks, AutoCAD, and Fusion 360, creating accurate... Read more

I am a skilled Mechanical Design Engineer with strong experience in CAD modelling, product design, and 3D visualization. I work confidently with SolidWorks, AutoCAD, and Fusion 360, creating accurate technical drawings, assemblies, and prototypes. I have completed advanced studies in Mechanical Engineering and Technical Project Management, and have experience across R&D, education, 3D printing, and engineering support. I’m detail-driven, reliable, and deliver high-quality work on time. My past projects include mechanical assemblies, product designs, architectural components, and manufacturing-ready models. I always aim for precision, clear communication, and designs that solve real-world problems.

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory... Read more

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.

With about 10 years experience in Mechanical Engineering Design, I have been involved in manufacturing process design as well as component design for the mining ventilation, utilities, HVAC, and proce... Read more

With about 10 years experience in Mechanical Engineering Design, I have been involved in manufacturing process design as well as component design for the mining ventilation, utilities, HVAC, and process cooling industries. I have the capability of not only designing, but also engineering with finite element analysis and ensuring manufactuarability of the design.

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any par... Read more

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any particular project and help you deliver Projects on time. - My main Field of stronghold is Mechanical Engineering, Architectural and Fire Protection and have 4 fulltime skilled inhouse draughtsman. - I also have a network of skilled draughtsman in different disciplines of Draughting ready to be engage with your projects. - I also have capacity to Plot drawings in large format paper size (A0) which makes it easy if you need to submit drawings in hard copy.

3D Modeling Design and 3D Printing Mechanical engineering undergraduate (2010 - 2014) and Entrepreneurship postgraduate (2015).

3D Modeling Design and 3D Printing Mechanical engineering undergraduate (2010 - 2014) and Entrepreneurship postgraduate (2015).

Experienced Mechanical Engineering Draughtsman and Plater-Welder / Boilermaker with 13+ years in the mining sector and 4 years in FMCG. Skilled in Autodesk Inventor (sheet metal), 3D modelling, fabric... Read more

Experienced Mechanical Engineering Draughtsman and Plater-Welder / Boilermaker with 13+ years in the mining sector and 4 years in FMCG. Skilled in Autodesk Inventor (sheet metal), 3D modelling, fabrication, and laser scanning. Proven leadership as Acting Head of Draughting, with strong safety, compliance, and innovation focus. Seeking opportunities in underground mining and long-term growth into a Mechanical Design Engineer role.

I am a Mechanical Design Draughtsman with a strong technical foundation and over three years of hands-on experience in mechanical design, drafting, and engineering support. I hold a National Diploma (... Read more

I am a Mechanical Design Draughtsman with a strong technical foundation and over three years of hands-on experience in mechanical design, drafting, and engineering support. I hold a National Diploma (2016–2020) and an Advanced Diploma (2021–2023) in Mechanical Engineering, as well as Multidisciplinary Draughting N4 & N5 certifications. Since 2022, I have worked extensively with crushers, wear parts, screens, modular crusher systems, spare parts, and heavy machinery, developing a deep understanding of mechanical components and plant equipment. My expertise includes: 3D modeling and detailed manufacturing drawings Reverse engineering and design modifications Converting 3D scans into production-ready CAD models Development and optimization of wear liners, feed hoppers, and crusher assemblies Providing on-site technical support and design advice to improve equipment performance and efficiency I am passionate about delivering high-quality, precise, and functional CAD designs that meet client requirements and industry standards. I combine technical accuracy with practical engineering insight to produce solutions that enhance performance, durability, and maintainability. Whether it’s a new product design, equipment modification, or reverse engineering project, I bring attention to detail, reliability, and a results-driven approach to every project I take on.

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing a... Read more

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing at a competition class Sailplane factory I'm knowledgable with turbojet and turbofans system analysis and design with focus on centrifugal compressors

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast... Read more

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast industry. Everything I design I try to make aesthetically pleasing, practical and mechanically strong enough for the job!

My name is Marco Lopes and I am a Mechanical Design Engineer, with 4 years of experience. I am a young and enthusiastic mechanical engineer passionate about problem solving, design engineering and tec... Read more

My name is Marco Lopes and I am a Mechanical Design Engineer, with 4 years of experience. I am a young and enthusiastic mechanical engineer passionate about problem solving, design engineering and technology, capable of designing mechanical systems from first principles through to working prototypes. My greatest strengths include the ability to apply my engineering knowledge to real world problems, actively within the work space and the ability to take the initiative in a project environment. with experience in; • 3D modelling (Autodesk Inventor) • 2D drafting (AutoCAD) • Mechanical design • Component design • Product design I have 4 years of engineering experience in the fast-paced automotive production industry and recently the heavy rigging and construction industry. I work well under pressure and always ensure work is completed in a timely manner at an impeccable standard. Working in the automotive production industry, I was tasked with the design and simulation of automotive tooling components for companies such as Ford, Opel and BMW. The tooling components formed part of the complete production process line. Working in the heavy rigging construction industry I am tasked with designing specialized lifting equipment for unique engineering lifts. I work in and among all types of industries, giving me broad spectrum of basic engineering understanding in all engineering disciplines. I am capable of bringing your design ideas to life and producing working prototypes. In addition to design and modelling services, I can provide other engineering services such as, technical communication, report writing and project management. Please feel free to contact me with any questions or project inquiries, I am more than willing to discuss ideas and potential projects.

Accomplished Mechanical Engineer with over 12 year’s invaluable experience of successfully overseeing and completing projects from conception to completion. Comfortable working in a fast-moving manufa... Read more

Accomplished Mechanical Engineer with over 12 year’s invaluable experience of successfully overseeing and completing projects from conception to completion. Comfortable working in a fast-moving manufacturing environment and ability to interact with departmental teams at all levels, customers and other stakeholders while possessing the skill to handle change and adapt to new situations. Knowledge of SolidWorks, Autodesk Inventor Mold Design Jigs and Tools design Steel Fabrication

Muhammad Irshaad Sabi is an accomplished Mechanical Design and Development Engineer with over 10 years of experience spanning the automotive, motorsport, and overland equipment industries. He has a pr... Read more

Muhammad Irshaad Sabi is an accomplished Mechanical Design and Development Engineer with over 10 years of experience spanning the automotive, motorsport, and overland equipment industries. He has a proven track record in product design, prototyping, testing, and manufacturing optimization, with hands-on involvement across all stages of the product development lifecycle. Currently serving as an Engineer at Tenneco Ride Control in Port Elizabeth, South Africa, Muhammad develops and refines shock absorbers for the Aftermarket industry, focusing on performance, durability, and cost efficiency. His role involves product design, testing, and continuous improvement initiatives to enhance ride quality and manufacturing efficiency across a range of vehicle platforms. Previously, he worked as a Design Engineer at Racing Force International (Bahrain) until May 2025, where he specialized in the design and additive manufacturing of racing helmets and safety equipment for globally recognized motorsport brands. There, he produced detailed CAD models, managed prototype development, and collaborated closely with R&D teams to meet stringent FIA certification standards. Earlier in his career, Muhammad served as a Development Engineer at Gabriel SA (Pty) Ltd, leading multiple shock absorber development projects for OEM and aftermarket clients. He also held engineering leadership roles at Alu-Cab Africa, overseeing design and production of 4×4 accessories and off-road campers. His diverse background combines design innovation, hands-on manufacturing experience, and strong project management capabilities. Muhammad holds a BTech in Mechanical Engineering from the Cape Peninsula University of Technology (CPUT). He is proficient in a range of engineering tools including SolidWorks (CSWA certified), Creo Parametric, AutoCAD, Solid Edge, and 3D scanning (VX Elements). His expertise also extends to Finite Element Analysis (FEA), reverse engineering, CNC machining, and composite manufacturing. Known for his technical leadership, problem-solving ability, and passion for innovation, Muhammad consistently delivers high-quality, cost-effective engineering solutions that enhance product performance and manufacturing efficiency.

I am Ndumiso, I am currently doing my last year in Mechanical Engineering at University of the Witwatersrand, Johannesburg South Africa. I have been using autodesk my whole life, from high school. I a... Read more

I am Ndumiso, I am currently doing my last year in Mechanical Engineering at University of the Witwatersrand, Johannesburg South Africa. I have been using autodesk my whole life, from high school. I am really good at it and i really want to make something out of it. I have drawn a couple of Mechanical components to show my great work.

2d & 3d Autocad and Inventor designer/draughtsman . 32 years experience in mechanical engineering/manufacturing/draughting/design -Drawing Board (3 yrs) --Cad (28 yrs) ---Cadkey (4 yrs) ---Auto... Read more

2d & 3d Autocad and Inventor designer/draughtsman . 32 years experience in mechanical engineering/manufacturing/draughting/design -Drawing Board (3 yrs) --Cad (28 yrs) ---Cadkey (4 yrs) ---AutoCAD 2d & 3d (16 yrs) ---Inventor (4 yrs) ---Autocad and Inventor Simultaneously (4 years) ---(and recently Autocad/Inventor Customisation) . Mining & Processing - 4 years Electrical Schematics & layouts - 1 1/12 years Aircraft Ground Support - 1 1/2 years Trailers, Tankers, Bus & Van Bodies - 6 1/2 years Diesel Engine Repower/Assy/Localisation - 7 years Formwork Scaffolding - 5 years High speed train civil works - 3 1/2 years Other miscellaneous mechanical/manufacturing - 3 years . Higher Diploma Mechanical Engineering Member SouthAfrican Institute of Mechanical Engineers Technician Member Engineering Council of South Africa Collaborator (Rank 9) on Autodesk Autocad & Inventor Forum Certified Autocad & Inventor Professional Certified Autocad & Inventor Trainer . Autodesk Product Design Suite Ultimate 2018 Autocad 2018, Inventor Pro 2018 (personal licensed copy) . Johannesburg, South Africa

I am a Mechanical Engineering graduate with strong skills in CAD design and analysis, proficient in SolidWorks, AutoCAD, and ANSYS. I have a keen eye for detail and problem-solving, with experience in... Read more

I am a Mechanical Engineering graduate with strong skills in CAD design and analysis, proficient in SolidWorks, AutoCAD, and ANSYS. I have a keen eye for detail and problem-solving, with experience in creating precise 3D models, technical drawings, and engineering simulations. My background includes academic projects focused on product design, structural analysis, and manufacturing processes. I am dedicated, adaptable, and eager to apply my knowledge to deliver accurate and efficient engineering solutions.

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electron... Read more

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electronic hardware and control systems to film-quality robotic arms. I have also been responsible for multiple products from their concept phase all the way to production and integration. I have always had a love for electronics and creating and for Mechatronics or Robotic projects. I am a good communicator with a wealth of knowledge and ample CAD experience (Autodesk Inventor and Fusion 360, SolidWorks, Siemens nX).

Autocad Mechanical Engineering Drafting Revit Architectural Drafting Fire Detection Design Fire Sprinkler Design

Autocad Mechanical Engineering Drafting Revit Architectural Drafting Fire Detection Design Fire Sprinkler Design

mechanical engineer with 5 years of experience specializing in building services. I has a proven track record in the design and draughting of wet services, fire protection systems, and HVAC (heating,... Read more

mechanical engineer with 5 years of experience specializing in building services. I has a proven track record in the design and draughting of wet services, fire protection systems, and HVAC (heating, ventilation, and air conditioning) solutions for a variety of commercial and residential projects. My expertise includes creating efficient, sustainable, and compliant designs, collaborating with multidisciplinary teams, and ensuring smooth project delivery from concept to completion. Known for my attention to detail and problem-solving skills, I am committed to providing innovative and cost-effective engineering solutions in the construction industry.

Finished my artisan training (Certified Machinist) after high-school. Studied Mechanical Engineering (B.Eng. Mech) after my trade training. Experienced in sheetmetal parts and the manufacturing sector... Read more

Finished my artisan training (Certified Machinist) after high-school. Studied Mechanical Engineering (B.Eng. Mech) after my trade training. Experienced in sheetmetal parts and the manufacturing sector. Training in Catia, SolidWorks, Creo and Inventor. Currently working with Inventor.

Professional manner with a Masters degree in Mechanical Engineering. I have over 10 year of experience in various fields including design engineering, industrial electric heating and control, plastic... Read more

Professional manner with a Masters degree in Mechanical Engineering. I have over 10 year of experience in various fields including design engineering, industrial electric heating and control, plastic molding, medical devices and technical sales. I have been a key team member in projects taking products from concept to production as well as value engineering projects in the manufacturing space.