CAD Modelling Expert | Mechanical System Design | Product Design
I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise... Read more
I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.
Experienced Design Engineer / Draughtsman
I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD,... Read more
I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.
General CAD Drafting, Mechanical Engineering & Mechanical Assemblies Specialist
Component Design & Manufacture
Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and... Read more
Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and become a fully integrated partner in your development project. Project Engineering Our involvement is entirely centered around the clients requirements. We are able to handle the product from start to finish Reverse Engineering Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. One type of reverse engineering involves producing 3-D images of manufactured parts when a blueprint is not available in order to re-manufacture the part. Re-Engineering Re-engineering of the existing engineered components and systems. Modifications of the existing design are done in order to enhance the look & feel, improve material usage and productivity.
Mechanical Designer
Wearables, Yacht & Marine, and Engineering Design Professional
BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services.... Read more
BMEC is a Cape Town based multidisciplinary engineering consultancy. We provide our global network of clients with a one-stop-shop for project management, design and manufacture services. Quality: BMEC has a no-compromise approach to quality and safety. Ethical, elegant engineering is the cornerstone of our business. BMEC's multidisciplinary team specialises in using the latest technologies and manufacturing methods to provide insightful solutions quickly and affordably Time: Our dedicated team coupled with our partner-network of suppliers means we can guarantee the shortest development time. Cost: Our professional design and manufacturing services are highly competitive. Scope: Our experienced team is here to help you find balanced solutions that fit your budget and your timeline.
Masters in engineering student with extensive experience in Autodesk Inventor and mechnical design
I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing. Read more
I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.
Yacht & Marine, SolidWorks, and Aerospace Professional
Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht... Read more
Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast industry. Everything I design I try to make aesthetically pleasing, practical and mechanically strong enough for the job!
Mechanical designer with extensive Design and Machining Experience, CNC programming and Autodesk Pro
Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing... Read more
Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.
Engineering Director in 3D printing, Autodesk AutoCad, Fusion360, and SolidWorks
Design Support to the Marine Industry
I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled... Read more
I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.
CorelDRAW, AutoCAD Architecture & Digital Rendering Expert
25 years experience in the Civil Engineering Industry providing AutoCAD support and 15 years as a GIS Technician (ArcMap) support. I have recently become full time freelancer providing the above... Read more
25 years experience in the Civil Engineering Industry providing AutoCAD support and 15 years as a GIS Technician (ArcMap) support. I have recently become full time freelancer providing the above support services.
Design & Drafting, AutoCAD, and SketchUp Designer
DraftSight, Construction & Design Professional
As a qualified structural technician I bring over 6 years of experience in a wide variety of fields. These include structural concrete and steel design and draughting . I am dedicated, hardworking,... Read more
As a qualified structural technician I bring over 6 years of experience in a wide variety of fields. These include structural concrete and steel design and draughting . I am dedicated, hardworking, and conscientious. I enjoy working in a team environment but am equally capable working on my own. I like to deliver quality work on time consistently During these 8yrs my duties as a structural technician have included: Detailing structural concrete layout and reinforcing (incl. bending schedules) using AutoCad & Pads, Designing structural concrete and reinforcement. Training staff regarding general office practice and how to deliver and prefer engineering drawings. Working with the Engineers and attending site meetings and inspections. Spending a year working in the Sheet Metal Industry, drawing and designing Communication Towers' components in 3d Autocad. Currently, I am seeking to be employed on a part-time or contractual basis that would allow me to work from home. Relevant qualifications: National Diploma: Civil Engineering ECSA Registered Candidate Technician
Mechanical Engineer with 10+ years experience in design.
I'm a mechanical engineer with 10 years machine design experience. I'm specialized in material handling equipment, sheet metal and structural designs. I'm proficient in finite element analysis and... Read more
I'm a mechanical engineer with 10 years machine design experience. I'm specialized in material handling equipment, sheet metal and structural designs. I'm proficient in finite element analysis and stress analysis theory and software. No job is too big or small!
HVAC DESIGN TECHNOLOGIST
In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and... Read more
In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventually becoming a Senior Contracts Manager taking charge of large HVAC installations. My Job description: • Duct design and workshop drawing plantroom layout. • Liase with client / consultants and architect on mechanical building services co-ordination and planning. • Workshop, site co-ordination and supervision. • Air-conditioning chilled, hot water piping schematics and layout details. • Tendering and estimating of jobs • Attend site and co-ordination meeting • Procurement of equipment • Monthly invoicing of contracts • Chilled water pipe calculations using the carrier design program. • Writing and compiling air conditioning maintanace manuals. • Design and manufacture of custom built chilled water air handling units for southern air conditioning contracts After 25 years I moved to a HVAC Design Consultancy Company as a Senior Design Engineer. My Job description • Budget proposal reports • Preliminary design reports • Hvac design. • Liase and architect on mechanical building services coordination and planning. • Attend plannining, site and co-ordination meetings. • Financial control up to final account. • Supervision of contract construction to final completion. • Suppervision of the hvac commissioning
Mechanical Engineering professional with Inventor experience
AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting. Read more
AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.
Professional Civil Engineering Technologist
I've been working on AutoCad since 2007 and Autodesk Civil 3D since 2008. I have a BTech Degree in Civil Engineering. In my 14 years of experience I've completed many design, drawing and detailed... Read more
I've been working on AutoCad since 2007 and Autodesk Civil 3D since 2008. I have a BTech Degree in Civil Engineering. In my 14 years of experience I've completed many design, drawing and detailed drawings. I have any eye for completing drawings to great detail and a high standard of quality for printing and submission to Clients.
3D modeler & Draughtsman
Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management Read more
Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management
Structural steel and reinforcement detailing
Mechanical Engineering Professional
Industrial Design Professional
Last updated: Apr 25, 2024
Hire a freelance General CAD Drafting expert in Cape Town! Find remote experts from our list of General CAD Drafting professionals.