I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

I have studied drafting for 3 years and specialize in the following fields: 3D rendering 3D modelling Sheet metal drawings CAD drawings Shop drawings etc. For more information, you can visit m... Read more

I have studied drafting for 3 years and specialize in the following fields: 3D rendering 3D modelling Sheet metal drawings CAD drawings Shop drawings etc. For more information, you can visit my website on www.madcaddesigns.co.za

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie... Read more

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.

With over a decade of specialized experience as a mechanical designer in the water treatment industry, I focus exclusively on delivering high-precision designs for ultrafiltration (UF) and reverse osm... Read more

With over a decade of specialized experience as a mechanical designer in the water treatment industry, I focus exclusively on delivering high-precision designs for ultrafiltration (UF) and reverse osmosis (RO) systems — including brackish water RO (BWRO) and seawater RO (SWRO). My expertise spans the full design lifecycle: • Creating detailed 2D process flow diagrams (PFDs) and P&IDs • Managing design offices and implementing standardized design procedures and documentation to ensure consistency, efficiency, and compliance across projects • Extensive 3D modeling of custom components, parts, pump skids, CIP systems, and complete plants within steel frame structures or containerized setups • Optimized pipe routing for high-pressure systems, ensuring minimal pressure drops and ease of maintenance • Producing meticulous manufacturing drawings, detailed bills of materials (BOMs), and fabrication-ready packages • Delivering photorealistic 3D renderings for client presentations, proposals, and marketing I have successfully supported numerous water treatment projects by turning conceptual requirements into production-ready designs that reduce manufacturing errors, speed up assembly, and lower overall project costs. My work emphasizes accuracy, manufacturability, and adherence to industry standards (e.g., ASME, ISO where applicable). Whether you need a full containerized RO/UF plant layout, skid-mounted system redesign, detailed piping isometrics, or standardized templates for your team — I’m ready to deliver reliable, high-quality CAD work on time. Let’s discuss your project — upload your specs or sketches, and I’ll provide a quick proposal with timelines and approach.

Efficiency and optimization focused CAD Designer with experience creating fully parametric, optimized for manufacturing ready designs and production drawings. With over 7 years experience designing p... Read more

Efficiency and optimization focused CAD Designer with experience creating fully parametric, optimized for manufacturing ready designs and production drawings. With over 7 years experience designing products of different niches, I have become a versatile CAD designer with expertise in multiple sectors including sheet metal, fibre laser cutting, sheet metal bending, CNC milling and CNC turning as well as 3D printed enclosures for outdoor applications. Software that I've worked with: - Autodesk Inventor - Autodesk Inventor CAM Suite - AutoCAD - Autodesk Fusion 360 - Ultimaker Cura - Keyshot Tasks / roles that I can fulfil: - Drafter / Drafting Tasks - Product Design - Sheet metal and bending designer - Reverse Engineer / Reverse Engineering - CAD Design - DFM / Design For Manufacturing - Design for 3D printing - Design for CNC Machining and CNC Turning - Design for Injection Moulding I was involved in: - Creating flat patterns for laser cutting, - Bend drawings for the bending team, - Assembly instructions for the assemblers - Steel tube cut list's for the manufacturing team, - Designing parts and then programming and running them on our CNC milling machine, - Designing optimised parts for 3D printing - Keeping an eye open for design optimisations in general I refined my skills further with my time working hands on with the production process, seeing and deeply understanding the processes involved in building your final product. This has taught me to always imagine the assembly process and keep an eye out for any design choices that could make manufacturing more difficult or downright impossible. My hands on experience comes from spending time working on a Sheet Metal Fibre laser, producing the flat parts for assembly as well as hand on assembly in an IoT device that was manufactured using 3D printing.

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an appro... Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an approach in hand drawn sketching and illustration skills. I’m very experienced with CAD programs such as Revit Architecture, Sketch-up, Zbrush, Substance Painter & Designer, Megascane, Solidworks, 3ds Max, Keyshot & Vray

Murdoch Tough (MT) MEP Design & Consulting Specialist offers expert MEP design and consulting services with a strong focus on electrical engineering, renewable energy systems, and building services. W... Read more

Murdoch Tough (MT) MEP Design & Consulting Specialist offers expert MEP design and consulting services with a strong focus on electrical engineering, renewable energy systems, and building services. With over two years of experience, we specialize in electrical load management, solar PV system integration, BESS solutions, and system optimization. Our expertise extends to MEP procurement, equipment setup, installation, and designing systems such as STP and WTP. We take pride in delivering precise, efficient designs that meet both budgetary and technical requirements, with an emphasis on sustainability and reliability. Let’s collaborate to optimize your next project and ensure it’s future-ready!

As an experienced architectural visualiser with a passion for creating images and walkthroughs so good that your client is guaranteed to be sold on your designs, I am confident in my ability to meet a... Read more

As an experienced architectural visualiser with a passion for creating images and walkthroughs so good that your client is guaranteed to be sold on your designs, I am confident in my ability to meet and exceed your expectations. After realising just how powerful well executed renders can be in selling homes and projects to clients, I have made it my aim to make renders so good that they cannot be said no to. To date, I have successfully had $150 million of total project value get the yes to commence building as the result of my renders. For the last few years I have specialized in bespoke and private holiday island visualisations in the Seychelles and Mauritius. I have also done a wide range of residential and commercial images and walkthrough renders. Before that, I have knowledge in successfully drawing up and passing plans through the council, creating construction plans as well as project managing many projects in my local area. I am now focusing on creating a more interactive experiences between clients and their projects through the power of technology and my expertise. This is being done by being the lead designer of the virtual real estate company “Superworld” Digital Twin Studio’s. Additionally, I am creating real time interactive architectural experiences using Unreal Engine 5. One of my greatest strengths is my ability to understand that the client uses these renders as their advantageous tool to sell their designs. I understand the importance of working closely with my client to ensure your project is agreed upon, and I pride myself on my ability to listen to your needs and deliver renderings that exceed your expectations. I am also able to work efficiently under tight deadlines, ensuring that your project stays on schedule and within budget. Please view my full portfolio in the Google Drive link below: https://drive.google.com/drive/folders/1l7bu50U626jMGRXkklpSbX_OeUApKUds?usp=sharing

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management

Professional manner with a Masters degree in Mechanical Engineering. I have over 10 year of experience in various fields including design engineering, industrial electric heating and control, plastic... Read more

Professional manner with a Masters degree in Mechanical Engineering. I have over 10 year of experience in various fields including design engineering, industrial electric heating and control, plastic molding, medical devices and technical sales. I have been a key team member in projects taking products from concept to production as well as value engineering projects in the manufacturing space.

I am a passionate designer with a keen eye for detail and a love for all things design. With 6 years of experience in the industry, I have had the opportunity to work on a diverse range of projects, f... Read more

I am a passionate designer with a keen eye for detail and a love for all things design. With 6 years of experience in the industry, I have had the opportunity to work on a diverse range of projects, from art-orientated projects to structured client-orientated design projects, personally and collaboratively. My goal is to create innovative and visually stunning designs that meet clients’ objectives, evoke emotion, and engage the audience. I believe that design has the power to transform the world. I am constantly inspired by the intersection of art and functionality, and I strive to create designs that are not only aesthetically pleasing but also purposeful and user-centric. I am a firm believer in the importance of research and understanding the target audience, as it allows me to tailor my designs to their needs and aspirations. When it comes to approaching design projects, I believe in a collaborative and iterative process. I enjoy working closely with clients, understanding their goals and aspirations, and translating them into visually compelling designs. Throughout the project, I prioritize effective communication and feedback to ensure that the final result aligns with the client's vision and exceeds their expectations. Areas of Expertise: - Concept Development - Research & Development - Sketching - 3D Modeling (CAD) - Prototyping - Basic Electronics & Coding - Mould Design - Digital Rendering - Brand Design & Development - Technical/Manufacturing Drawings

I am a mechanical engineer who studied at Stellenbosch University in South Africa. I have experience in product design in the agricultural and weapons manufacturing sector.

I am a mechanical engineer who studied at Stellenbosch University in South Africa. I have experience in product design in the agricultural and weapons manufacturing sector.

I am an industrial designer with 3 years of experience specializing in SolidWorks. With a strong background in mechanical engineering, I bring a technical and creative approach to design, focusing on... Read more

I am an industrial designer with 3 years of experience specializing in SolidWorks. With a strong background in mechanical engineering, I bring a technical and creative approach to design, focusing on functionality and innovation. My expertise in CAD modeling and product development allows me to efficiently transform ideas into practical, manufacturable solutions.

I have been designing jewellery using CAD software for the past 10 years. I have worked on bespoke and mass production projects using 3D printers. My experience has taught me the casting and manufactu... Read more

I have been designing jewellery using CAD software for the past 10 years. I have worked on bespoke and mass production projects using 3D printers. My experience has taught me the casting and manufacture process of various types of jewellery. I use, Rhinoceros, Magics, Matrix, Keyshot and Vray for producing 3D models and photo-realistic renderings. Please contact me for more details

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Art... Read more

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Arts Gallery (AVA) in Cape Town as well as at the University of Johannesburg Art Gallery, in addition to featuring in the Visi Magazine.