Hire 3D Assembly Drawings Designers in South Africa

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

Good Day My Name is Pieter Specialize in 3D Modeling and realistic photo renders. I have been working for two years as a graphic designer and for three years as a product designer. I have been workin... Read more

Good Day My Name is Pieter Specialize in 3D Modeling and realistic photo renders. I have been working for two years as a graphic designer and for three years as a product designer. I have been working on Inventor for four years and worked in the trailers industry for two years making truck trailers, for example, semi-trailers, abnormal trailers, low beds. Then switch to machine designs like plastic welders, vacuum formers, which also included electric diagrams. Can write CNC programs and NC programs. I Believe the customer comes 1st in all projects, and I aim to supply the best quality of work I can provide to the customer.

Hello and thanks for reading my Bio. I'm a mechanical engineer with 2D drafting, 3D modelling and CAE experience. My drafting experience include product, prototype and machine design. I design vari... Read more

Hello and thanks for reading my Bio. I'm a mechanical engineer with 2D drafting, 3D modelling and CAE experience. My drafting experience include product, prototype and machine design. I design various products for the Aerospace, Defence, Commercial, Medical, Marine and Industrial sectors. I basically involved in the ideation/conceptual phase, design, prototype and testing of the product. I also have project management experience and often work with startups. Software that I use are AutoCAD, Inventor, SolidWorks, SketchUp, ANSYS, SimScale, FreeCAD, Keyshot, Meshmixer and 3D builder. My curriculum vitae is available on request. Available for any questions. My time zone is GMT+2, South Africa. Thanks for reading.

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing a... Read more

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing at a competition class Sailplane factory I'm knowledgable with turbojet and turbofans system analysis and design with focus on centrifugal compressors

My name is Pieter Steinberg and I am an industrial designer and qualified artisan with a strong eye for detail, excellent communication skills, and a goal-driven approach to problem solving. With exte... Read more

My name is Pieter Steinberg and I am an industrial designer and qualified artisan with a strong eye for detail, excellent communication skills, and a goal-driven approach to problem solving. With extensive experience in the plastic conveyoring and packaging industry, he has successfully completed hundreds of machine designs, managing projects from initial concept and design through to detailed manufacturing drawings and comprehensive bills of materials. I combine practical hands-on knowledge with technical design expertise, enabling him to develop efficient, reliable, and production-ready solutions. His ability to translate ideas into functional designs, while collaborating effectively with engineering, production, and manufacturing teams, ensures that projects are delivered accurately and efficiently.

I have been involved with piping, structural and mechanical equipment in mining & process plant most of my working life. From concept to detail design through to fabrication and construction. My exp... Read more

I have been involved with piping, structural and mechanical equipment in mining & process plant most of my working life. From concept to detail design through to fabrication and construction. My experience as an artisan enhances my abilities to do design of process plants. My experience includes construction supervision of plant where I also were part of the design team. I have experience in the complete workflow, from surveying pipeline routes, calculation of pipe sizes, friction losses, pump station design, pump selection and incorporating all this into a 3D model using either Inventor, AutoCAD or AutoCAD. From this I produce fabrication drawings for use in a workshop, and construction/assembly drawing to facilitate the construction phase.

DeBeers Venetia Mine. My position was as a senior design draughtsman at a project support office for DeBeers. My duties included the following : Drafting of structural drawings : Drafting of civi... Read more

DeBeers Venetia Mine. My position was as a senior design draughtsman at a project support office for DeBeers. My duties included the following : Drafting of structural drawings : Drafting of civil drawings : Drafting of mechanical drawings : Drafting of piping drawings : Drafting of plate work drawings With the aid of AutoCAD and Inventor. Drawings was all done in 3D Site measurements and inspections. Structural drafting included : 1. Location / Site Plans - Relation to other structures, roads, boundaries, ect. 2. General arrangements - Plans, sections and elevations for leading dimensions Of floors, rooms, machinery, cranes, ect. 3. Marking plans - Location and mark numbers of steelwork in floors, roof and elevations. 4. Detail drawings - Details of structural members showing size, materials, drilling and welding for fabrication. Civil drafting included : 1. Location / Site Plans - Relation to other structures, roads, boundaries, ect. 2. Plans and elevations - Re and unreinforced concrete structures, foundations, floor slabs, pits, drain trenches, ect. Architectural plans and elevations. Details of of office buildings, control room, workshops, ect. 3. Detail drawings - Details of unreinforced concrete and reinforced steel layout and details. Sections, enlarged details and anchor bolts. 4. Bending Schedule - Details of all reinforced steel, codes material, lengths, ect. 5. Sewer and drainage - Layout and longitudinal sections. Details of sewer boxes, grating plans, sloping floors, trenches, ect. Mechanical drafting included : 1. Location / Site Plans - Relation to other structures, roads, boundaries, ect. 2. General arrangements - Plans, sections and elevations for leading dimensions Of floors, rooms, machinery, cranes, ect. 3. Marking plans - Location and mark numbers of steelwork in floors, roof and elevations. 4. Detail drawings - Details of structural members showing size, materials, drilling and welding for fabrication. Piping drafting included : 1. General arrangement - Plans, sections and elevations for leading dimensions Of piping. Pipe accessories, eqeupment, structures, Foundations, ect. 2. Isometric drawings - Details of pipes, valves, ect and all material required. ( pipe, bolts, valves, ect. ) Plate work drafting included : 1. General arrangements - Plans, sections and elevations for leading dimensions Of shutter panels, chutes, ect. 2. Detail Drawings - Details of plate work members showing size, materials, Drilling and welding for fabrication. 3. Material lists - Providing material lists for ordering of steel, plates and Bolts. Faro 3D Scanning of all equipment and buildings as required for work load. Accident and incident scene scanning for investigation and presentation purposes. Processing and working with 3D point clouds using Faro scene, Autodesk Recap and Autodesk Naviswork. 3D modeling from point clouds using Autodesk Inventor and AutoCad. New Equipment installation and as build drawings done from pint clouds and 3D Model.

I am a well rounded individual, that finishes given work in the shortest time possible. With extreme attention to detail and accuracy I work well alone aswell as in a team. I worked my way up fairly... Read more

I am a well rounded individual, that finishes given work in the shortest time possible. With extreme attention to detail and accuracy I work well alone aswell as in a team. I worked my way up fairly fast from single component drawings for a sheet metal fabrication company, to heading up my own projects always ensuring my projects are done in time.

I am a 34year old natural talented artist that has a sharp eye when it comes to cutting edge modern & futuristic 3D designs.

I am a 34year old natural talented artist that has a sharp eye when it comes to cutting edge modern & futuristic 3D designs.

Hi there, My name is Kesavan Chetty. I am currently working as Draughtpersons for an engineering company in South Africa that manufacturer Saturated Diving systems that are being built in Dubai & Indi... Read more

Hi there, My name is Kesavan Chetty. I am currently working as Draughtpersons for an engineering company in South Africa that manufacturer Saturated Diving systems that are being built in Dubai & India. I am currently trying to step out of this field and start freelancing as draughtsperson fulltime. So I am able to assist and help companies around the world with design and draughting remotely. My ideal goal is not to remain stationery but gain experience all over the world in the industrial of design and draughting. I am also currently furthering skills in product designing & architectural renderings. I am looking forward and it will be a pleasure and privilege if you choose as a draughtperson to work on your projects.