Hire Schematic Design Designers in United States

My name is Robert Holden and I find the right balance for successful project design. Projects begin with ideas. Ideas convert to goals. Attaining goals often require a physical environment to acco... Read more

My name is Robert Holden and I find the right balance for successful project design. Projects begin with ideas. Ideas convert to goals. Attaining goals often require a physical environment to accomplish. ►This is the point where I join the conversation. I begin with a detailed scope of work based on a legacy of successful projects. ►Next, schematic design is an iterative process where investigation compiles constraints. ►Constraints are documented in a program. Once approved, the program is the basis for graphic representations of conceptual designs. ►With a selected design concept, design development begins, documented methods, materials and components are incorporated into the program. ►A completed program is melded into a construction model. The model is carved into construction documents. ►Construction documents are divided by trade. Each trade submits a proposal for construction. ►With accepted proposals, construction administration begins with site mobilization and kickoff. This is the point where conversations that I initiated have been expressed, work now delegated to trades, I remain available for clarifications and change orders, only as required. The aforementioned steps have successfully attained many goals. At times I'm a team member on large complex projects. The largest projects may take months of work to complete. Sometimes I work alone on small projects. On very small projects these steps may be accomplished within hours. Trackball in hand, Revit subscription, on the 11th floor of Plaza Asturias in beautiful Maringá Paraná, with a black pug, Noah, and my husband, Joaõ, I am ready to discuss your goals. Except when I'm in my morning AcquaPower class at the gym. ▓ Please emall, text, call or message me about what I may do to help. ▓

I am a Certified Professional Building Designer with 7 years of hands on Architectural Design and Drafting experience. I am highly proficient in using Sketchup Pro and Layout, as well as AutoCAD to... Read more

I am a Certified Professional Building Designer with 7 years of hands on Architectural Design and Drafting experience. I am highly proficient in using Sketchup Pro and Layout, as well as AutoCAD to produce construction and design documents. My experience pertains to producing design drawings for residential and light commercial projects, and for all phases including Conceptual Design, Schematic Design, Design Development, and Construction Documents. I maintain my title as Certified Professional Building Designer with the National Council of Building Designer Certification, Which requires at least 6 years of Drafting Experience to qualify to take the exam. Upon successfully passing the exam it then requires 8 credit hours of continuous education per year to maintain certified status.

I have over 17 years of experience in commercial and residential floor plans. I am a highly trained and resourceful Design expert that thinks independently and works collaboratively to promote client... Read more

I have over 17 years of experience in commercial and residential floor plans. I am a highly trained and resourceful Design expert that thinks independently and works collaboratively to promote client success collectively. WHAT I OFFER: • Schematic Design • Drawings • Floor Plans Design • Elevation • Section View • Details • Reflected Ceiling Plan • Interior Plan Development • Graphic Design • Site Plan Development • Shop Drawing • As-Built Drawing Quality Renderings 100% Guaranteed I specialize in Realistic 3D Renderings, Floor plans, and any type of modeling service related to Architecture and Engineering. I provide you with the highest quality product at a great value. Renderings we offer: • Exterior Renderings • Interior • Floor Plan • Areal View • Site Plan • Landscape Process: 1. Inquiry 2. Agreement 3. Proof Rendering 4. Final Rendering SOFTWARE: AutoCAD, Revit, Sketchup, Rhino, Adobe Illustrator, InDesign, Photoshop, ArchiCAD and much more! I am a taskmaster at every level. The fears of most clients stem from lack of transparency, slipping time frames and rising budgets. I provide transparent quotes and reliable, predictable timelines.

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept design... Read more

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept designs and installation, start-up, acceptance testing, and electrical safety Panel modifications and upgrades. Specialties: - Controls Engineering - Machine Safeguarding Electrical & Hard Guarding - Arc Flash Safety PPE Requirements - Power/Control Panel Design - Engineering Administration - Panel/Control System Upgrades - AutoCAD Electrical (2011-2013) - PLC Programming (Allen Bradley Micro, 500, Studio 5000) - Microsoft Office (Word, PowerPoint, Excel) - SCADA HMI Design (Wonderware, Panelview, C-More) - Wireless, Broadband network communication - Industrial Low Voltage Grounding and Short-circuit Protection - Arc Flash Panel Assessments (Easy Power) - Design Electrical Safety Controls - Interpret Electrical Single Line Drawings - Mange Small Capital Projects (< 150K) - Working Knowledge of NEC, NFPA 70E and NFPA 79 - Machine Guarding Team Leader - Root Cause Problem Solving - Supply Chain Management

Designer with 15 years experience, I have worked in multiple design principles including, Electrical schematic designs, Piping & instrumentation Documents, Structural designs, cabinetry, Space plannin... Read more

Designer with 15 years experience, I have worked in multiple design principles including, Electrical schematic designs, Piping & instrumentation Documents, Structural designs, cabinetry, Space planning, 3D design and renderings, the list continues. I am here for any of your design needs.

I am a CAD Designer with 3 years of experience in the Telecom world. I designed as-built fiber layouts for MDU on various projects in the Southeast and West Cost regions of the country. I have a good... Read more

I am a CAD Designer with 3 years of experience in the Telecom world. I designed as-built fiber layouts for MDU on various projects in the Southeast and West Cost regions of the country. I have a good understanding of what is needed in the field, and I can communicate very well with engineers. I have experience in AutoCAD, ARAMIS, and Byers programs, and I'm self-taught REVIT. I'm an illustrator/graphic designer by trade, and that comes in very handy when I need to go into CAD to design concepts or draft engineering layouts. I'm very easy to get along with, and I have a great sense of humor. I'm a Navy veteran, so hard work and attention-to-detail are hardwired into me.

Hello, it’s Daniel Ferndale a professional circuit specialist with experience in PCB design, embedded systems, schematic capture, and PCB layout. I specialize in developing reliable and efficient ele... Read more

Hello, it’s Daniel Ferndale a professional circuit specialist with experience in PCB design, embedded systems, schematic capture, and PCB layout. I specialize in developing reliable and efficient electronic designs using platforms such as ESP32 and STM32, with a strong focus on functionality, performance, and manufacturability. I work on everything from custom circuit development and prototyping to complete hardware solutions for audio, IoT, automation, and embedded applications.

I am an Interior Designer with over 5 years of experience supporting residential and commercial projects from concept development to technical documentation. I specialize in space planning, 3D modelin... Read more

I am an Interior Designer with over 5 years of experience supporting residential and commercial projects from concept development to technical documentation. I specialize in space planning, 3D modeling, and the preparation of construction drawings that translate design ideas into buildable solutions. Throughout my experience in Latin America, I have worked on single-family homes, apartment interiors, and commercial spaces such as retail and offices. My role has involved developing layout proposals, creating mood boards and visual presentations, and producing detailed drawings using AutoCAD, SketchUp, and Revit. I enjoy transforming ideas into functional and aesthetically cohesive spaces, always balancing creativity with technical precision. I am detail-oriented, highly collaborative, and comfortable working in multidisciplinary and remote environments. My professional goal is to continue growing within international teams, contributing strong technical documentation skills, design sensitivity, and a proactive mindset to international based interior design projects.

I am passionate about design and creating environments that are aesthetically appealing while enhancing&nbsp;human experience and function. I both Bachelor's and Master's degrees in Interior Architect... Read more

I am passionate about design and creating environments that are aesthetically appealing while enhancing&nbsp;human experience and function. I both Bachelor's and Master's degrees in Interior Architecture that are CIDA accredited. I have over 10 years working professionally and consulting with interior designers, architects, landscape architects, set and production designers on their projects by taking their sketches and reference images and translate them into construction documents and renderings. My specialties include: Interior Architecture Space Planning Schematic Design Set Design Production Design

Skillful project architect with more than fifteen years of experience and knowledge of architectural practices, construction design, and technology. • Outstanding skills in project design, coordinat... Read more

Skillful project architect with more than fifteen years of experience and knowledge of architectural practices, construction design, and technology. • Outstanding skills in project design, coordination, cost estimating and scheduling. • Strong knowledge of architectural and building materials, codes and construction methods. • Exceptional knowledge and proficiency with architectural and modeling software. Autodesk Revit Architecture, AutoCAD Architecture,

Professional Profile – CAD Crowd (Restaurant & QSR Specialist) Jhonray Madrelejos Virtual Architect | Restaurant & QSR Design Specialist | 10+ Years Experience I am a BS Architecture graduate with o... Read more

Professional Profile – CAD Crowd (Restaurant & QSR Specialist) Jhonray Madrelejos Virtual Architect | Restaurant & QSR Design Specialist | 10+ Years Experience I am a BS Architecture graduate with over 10 years of professional experience delivering high‑quality architectural design and drafting services, with a strong specialization in restaurant and quick‑service restaurant (QSR) projects, including Pizza Hut–style free‑standing and fit‑out developments. I provide end‑to‑end architectural support—from schematic design and design development to shop drawings, permit sets, and construction details. My work is focused on producing branding‑compliant, operationally efficient, and construction‑ready drawings tailored to QSR standards and local code requirements. In addition to restaurant projects, I also handle residential, commercial, rentable spaces, condominium units, and monumental structures with the same level of technical precision and design clarity. Restaurant & QSR Expertise Pizza Hut–style free‑standing and fit‑out restaurant design Quick‑service restaurant (QSR) layouts and branding compliance BOH (back‑of‑house) and FOH (front‑of‑house) planning Kitchen zoning and operational workflow optimization Dine‑in, take‑out, and delivery‑focused layouts Permit drawings and landlord coordination sets Construction drawings, shop drawings, and technical details General Architectural Services Schematic design and design development Construction documents and shop drawings Space planning and layout optimization 3D modeling and client‑ready visualizations Redline revisions and as‑built documentation Software Proficiency AutoCAD SketchUp Enscape Canva Microsoft Office (Word, Excel, PowerPoint) Google Workspace (Docs, Sheets, Slides) What I Bring to Your Project 10+ years of hands‑on architectural drafting and design experience Proven specialization in restaurant and QSR projects Branding‑compliant and permit‑ready documentation Strong attention to detail and construction accuracy Clear communication and dependable turnaround times Full remote availability as a Virtual Architect Career Objective I am seeking long‑term remote opportunities and ongoing collaborations with restaurant brands, developers, architects, and contractors who need a reliable Virtual Architect for restaurant and QSR design projects. My goal is to support business growth through efficient documentation, high‑quality design output, and consistent project delivery.

Here at imagine Reality we believe that each & every 'space' has the potential to become unique yet harmonious, beautiful yet functional, & most importantly, all yours. We specialize in the followin... Read more

Here at imagine Reality we believe that each & every 'space' has the potential to become unique yet harmonious, beautiful yet functional, & most importantly, all yours. We specialize in the following: Architectural Design | Space Planning | Design Consultation | Concept Development | Visualization Our goal is to ensure that you are completely satisfied with the way your 'space' looks, feels & functions. From full-scale projects to small renovations & face-lifts, we are here to help you envision your 'space' . . . to imagine your own Reality. Please visit us at www.iRdesignCreate.com and follow our social media (FB & IG) @iR.design.create

I am an electrical engineer with experience in designing electronic solutions for rugged robotic applications. This includes PCB designs, cable harnesses, motor and feedback selection, and overall sys... Read more

I am an electrical engineer with experience in designing electronic solutions for rugged robotic applications. This includes PCB designs, cable harnesses, motor and feedback selection, and overall system architecture. I also have experience designing mechanical components such as rugged enclosures, heat sinks, etc. My skills span the full design process, from initial concept and requirement generation to final product design and manufacturing.

I help startups and product teams develop IoT hardware products from concept to prototype and manufacturing. My services include schematic design, PCB layout, ESP32 / STM32 hardware design, sensor in... Read more

I help startups and product teams develop IoT hardware products from concept to prototype and manufacturing. My services include schematic design, PCB layout, ESP32 / STM32 hardware design, sensor integration, power circuit design, enclosure integration support, BOM, Gerber, Pick & Place files, and prototype debugging. I can also work with mechanical CAD designers to ensure the PCB fits correctly inside the product enclosure.

With over 20 years of design, and 5+ years of automation experience, I am a perfect, versatile option for contract work! I specialize in machine design using the SolidWorks environment. I have bee... Read more

With over 20 years of design, and 5+ years of automation experience, I am a perfect, versatile option for contract work! I specialize in machine design using the SolidWorks environment. I have been using SolidWorks for 6 years, with all previous years utilizing the 2D AutoCAD environment. I have designed machines of varying size and complexity. I have also worked on the automation side of the machine building process, for both schematic design and programming of the machine. I have written programs for motion controlled machines using both Allen Bradley and Schneider Electric Software. I take pride in having a tireless work ethic, good communication skills, and providing quality customer satisfaction with every project.

Experienced Architectural Designer with a Bachelor of Science in Architectural Engineering from Missouri University of Science and Technology. Demonstrated history of working on renovation projects in... Read more

Experienced Architectural Designer with a Bachelor of Science in Architectural Engineering from Missouri University of Science and Technology. Demonstrated history of working on renovation projects in the healthcare industry, and most recently a variety of new build projects in the transportation and public works industries.

I have been working in an award-winning architecture firm located in Florida for two years after I received my Master of Architecture from Virginia Tech. I am participating in all design phases from s... Read more

I have been working in an award-winning architecture firm located in Florida for two years after I received my Master of Architecture from Virginia Tech. I am participating in all design phases from schematic design to construction administration for high-end single-family residential projects. And I am a licensed architect in Floridan and also a Leadership in Energy and Environmental Design Accredited Professional (LEED AP). You will be able to save 75% schematic design fee by working with me as a freelancer, comparing to a traditional architectural firm. Everyone deserves good design and let's make full use of the internet!

With 30 years of experience in robotics automation and engineering design, I bring my knowledge and expertise with me. I specialize in the fields of Medical Devices, Automotive and Injection Molding.

With 30 years of experience in robotics automation and engineering design, I bring my knowledge and expertise with me. I specialize in the fields of Medical Devices, Automotive and Injection Molding.

I am a Mechanical HVAC Engineer currently working and residing in southern California. I graduated from Rensselaer Polytechnic Institute in 2013, and have worked for various construction, design-build... Read more

I am a Mechanical HVAC Engineer currently working and residing in southern California. I graduated from Rensselaer Polytechnic Institute in 2013, and have worked for various construction, design-build, and consulting engineering firms. I am an Autodesk Certified Professional in Revit Mechanical (https://www.youracclaim.com/users/jeremy-coyle). In my current position, I focus on small to large commercial projects, including office buildings, restaurants, laboratories, and higher education.

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentat... Read more

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentation for midstream & downstream systems. I currently am a partner at ENI Drfting & Design providing 2D,3D Design & Drafting services. We look forward in working with you.

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of th... Read more

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of the areas of I&E Design, including basic knowledge of UL Industrial Control Panel fabrication standards for non-hazardous (UL 508A) and hazardous locations (UL 1203, 698A). Assist in conducting field audits and investigations of customer facilities and manufacturing plants. I try to identify opportunities for improvement and make constructive suggestions for change. Comply with company standard policies and procedures. I have experience and Technical Training in Instrument and Electrical Design for the Industrial, Commercial, Manufacturing, or Oil and Gas industries. iOccasional travel to client offices and construction sites will be required.

Registered PE in VA, MD, DC. Able to get resiprocity in most states. Prepare detailed MEP design/construction documents. Prepare schematic design narratives. Perform QC/QA of designed work. Perfo... Read more

Registered PE in VA, MD, DC. Able to get resiprocity in most states. Prepare detailed MEP design/construction documents. Prepare schematic design narratives. Perform QC/QA of designed work. Perform load/capacity studies. Perform power and signals, lighting, fire alarm systems analysis, calculations and design in compliance with local code requirements. Experience working with residential, commercial, and government projects.

I have over 5 years of experience with AutoCAD (From 2007-2017 Versions) doing 2D Schematic/ layout & 2D/3D detail drawings for a flooring contractor in the NY/NJ area. I have about 2 years of experie... Read more

I have over 5 years of experience with AutoCAD (From 2007-2017 Versions) doing 2D Schematic/ layout & 2D/3D detail drawings for a flooring contractor in the NY/NJ area. I have about 2 years of experience using Revit & Revit Architecture for BIM Coordination Purposes. I can dedicate 5 hours on weekdays along with whatever time is required on Saturdays and Sundays.