Hire Oil and Gas Designers near Texas, United States

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical drafte... Read more

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical drafter and design engineer. He's held the titles of Designer, Drafter, Project Designer, and Sr. Designer. Tripp also serves on the School board in his community as the Board President. Tripp has been married for 20 years and though he and his wife have no children, they have two dogs and a cat that they consider their children. He enjoys taking his wife and dogs camping in their RV whenever he gets the chance.

I'm a long time drafter and designer who has worked in several industries, including oil and gas, turbo machinery, and packaged energy. I've worked for small companies and large, in various capacities... Read more

I'm a long time drafter and designer who has worked in several industries, including oil and gas, turbo machinery, and packaged energy. I've worked for small companies and large, in various capacities. I've served as a senior designer for a Fortune 500 corporation and a lead designer for a small independent engineering design services company.

Over 25 years of experience working on time sensitive, critical path, highly confidential projects for industry leaders. Servicing Oil & Gas, Commercial, Industrial & Medical Industries. Product Desi... Read more

Over 25 years of experience working on time sensitive, critical path, highly confidential projects for industry leaders. Servicing Oil & Gas, Commercial, Industrial & Medical Industries. Product Design & Development, 3D CAD Modeling, 2D Detailed Drawings and Assemblies, Proof of concept, Prototyping, Fabrication, Manufacturing, Construction, As Built, Simulation, FEA, Animation, Rendering, Bill of Materials, Material take-offs, Weight take-offs & Cost Management.

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater treatme... Read more

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater treatment, marine, automotive, machining, process piping, building & structural design.

I have 25 years experience providing Cad and design services using AutoCad, Microstation, Revit, and Cadworx for plumbing, fire protection, irrigation, HVAC, electrical, strcutural, civil, oil and gas... Read more

I have 25 years experience providing Cad and design services using AutoCad, Microstation, Revit, and Cadworx for plumbing, fire protection, irrigation, HVAC, electrical, strcutural, civil, oil and gas, structural systems.

My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIO... Read more

My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic and control narratives for coke drum sequence control system, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system - SAUDI ELASTOMER PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic, cause and effect, control and safeguarding narratives of the whole EPC project, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system as a SENIOR INSTRUMENT & CONTROL ENGINEER - SOUTH PARS PHASEs (Phase 12, Phase 17 and 18) as an INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT: o Responsibilities: Principal detail design work for several related Demin water, waste water and polishing water units as a INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT. My skills can be summarized as in developing required detail instrument and control documents for EPC projects (Control narratives, C&E, S.G. Narrative, Logic, Index, Cable routing, etc., package or detail design review, design leadership and highly qualified in working with Autocad, and M.S. Office, programming and etc. The key strengths and achievement that I possess for success which make me very competitive candidate for the above position are as follows: • Receiving Award of Excellence of Year 2014 as the best instrument engineer in a reputable EPC Company, due to EPC project cost saving of more than 5,000,000 USD. • Leading package design works for more than 39 packages for SAUDI Elastomer project and more than 20 packages for OMAN SRIP project. Those packages include Utility boilers and water, air and oil utilities, several gas and air reciprocating and centrifugal compressors and etc. • Leading the design work for the Vibration monitoring and condition monitoring system of above projects • Developing the control and safeguarding narrative and logic works of SEP project (SAUDI Elastomer Project) • Leading the instrument database works for above projects • Being involved in various turbine control scenarios and I believe myself as a turbine control specialist. • Promotion from principal to senior to lead instrument engineer and finally to vice of deputy of engineering management in a process package vendor company within short period of time due to the high technical and leading skills • Leading detail design works of packages in vendor companies with variety of abilities including detail design, PLC programming and etc. • Leading and also carrying out the detail design, procurement and some parts of the constructions steps of more than four EPC process and utility units in Oil and Gas Industries worldwide as a vendor package detail designer and reviewer. • My strong analytical and forward looker mind, punctuality, perseverance, excellence and development seeking characters have led to more accurate, efficient and cost saving designs • Cost effectiveness along with better efficiency is one of the aims is being sought and I believe that engineering is a trade-off between the cost and the efficient design With a BS degree in Instrument and Control Engineering, I have a very good knowledge of process control and instrumentation, high leadership potential and energy levels, very strong analytical mind and deep detail-oriented skills, multitask handling abilities, responsible, creative and strong technical experience, very motive, super active and highly efficient and all this is owing to my educational backgrounds and absolutely my past experience in research then in detail design, then design review of small to enormous EPC project as well as conducting detail design leadership as a senior instrument and control engineer. Attached, you can find my resume for your kind consideration. I can be reached anytime via email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or my ▒▒▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

“I bet you can’t do that Brian….” This is been a phrase that has driven me since I was a kid. I was gifted with mechanical aptitude, creativity, a great desire to learn. Through my upbringin... Read more

“I bet you can’t do that Brian….” This is been a phrase that has driven me since I was a kid. I was gifted with mechanical aptitude, creativity, a great desire to learn. Through my upbringing, I was encouraged to work hard, never give up, serve others, and give all the glory to God. This work ethic has allowed me to continue to refine my skills and gain knowledge in many industries. When a problem arises, most people look around to see who is going to fix it, while I am chomping at the bit to develop a solution for the problem. While I do have a natural ability to fix things, I am also Creative & Artistic, which has given me the ability to provide better solutions to complex problems. This has also helped me to provide feasible/functional solutions for Architectural Projects that maintain the overall artistic touch that a customer/client may be looking for. I have 20+ years of experience in developing solutions, products, and systems in the Oil Field Industry, Agriculture Industry, Firearms, and General Consumer Products. I am the Inventor of 2-Patents for Oil Production Technology, and have developed other patented product designs for my customers. Through Process Development, I have helped numerous companies increase revenue, and expand their Product/Technology capabilities utilizing a logical, creative approach. Product Design - Product Development - 3D CAD Modeling - Prototyping/Proof of Concept - Patent Drawings - System Design - Pump Sizing - Automation/Controls - Branding Development - Architectural Design - Artistic Features - Furniture - Gates/Entries - Fountains - Light Features…….

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentat... Read more

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentation for midstream & downstream systems. I currently am a partner at ENI Drfting & Design providing 2D,3D Design & Drafting services. We look forward in working with you.

In my previous role as MSME, engineer, and manager with 30+ years of R&D involvement, I gained the knowledge and experience I need to hit the ground running and start making an immediate contribution.... Read more

In my previous role as MSME, engineer, and manager with 30+ years of R&D involvement, I gained the knowledge and experience I need to hit the ground running and start making an immediate contribution. The following are just a few highlights of my professional skills and achievements that I hope to bring to your company: • The adept user of most popular 2D and 3D CAD modeling applications (SolidWorks, CreO, Inventor, SolidEdge...) • FEA and CFD analyst with solid experience using several most widespread packages (Ansys, Abaqus, CFD, Fluent, IcePak…) • Team lead responsible for testing and analyzing the feasibility, design, and performance of equipment, components, and systems. • Project manager liable for the development, coordination and monitoring all aspect for several $10 million production projects, including a selection of manufacturing methods, fabrication, and operations of product designs. In addition to all the above, I possess experience in designing innovative complex equipment and possess the aptitude needed to work with abstract system design concepts.

I have 20 years of experience as a tool and diemaker, mechanical designer, draftsman and CAD/Documentation Manager. I specialize in Mechanical Engineering using AutoCAD and Solidworks to bring ideas t... Read more

I have 20 years of experience as a tool and diemaker, mechanical designer, draftsman and CAD/Documentation Manager. I specialize in Mechanical Engineering using AutoCAD and Solidworks to bring ideas to reality. Whether it's the automotive, oil and gas, aerospace or fiber optic industry let me help your company reach it's highest potential. Whether it's 2D to 3D conversion, detail drawings, assemblies, bill of materials, design consulting or just large format scanning, I help you meet your goals.

A little about myself I have worked in engineering as a CAD Designer for a little over a decade. My experience includes working in municipalities, utilities, renewables and oil and gas sectors. I prid... Read more

A little about myself I have worked in engineering as a CAD Designer for a little over a decade. My experience includes working in municipalities, utilities, renewables and oil and gas sectors. I pride myself in accurate and efficient design. My skills include 3D modeling, 2D architectural design, plan and profile design and pipe networks. Proficient in AutoCAD, Civil 3D, ArcMap and ArcPro software. Always up for a challenge look forward to working on more innovative projects.

I'm a Design/Manufacturing Engineer that specializes in Design for Manufacture in industries ranging from jewelry to oil and gas.

I'm a Design/Manufacturing Engineer that specializes in Design for Manufacture in industries ranging from jewelry to oil and gas.