Hire Mechanical Engineering Designers near New Jersey, United States

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plum... Read more

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plumbing systems that pass plan review the first time. Expertise: Mechanical Engineering Design HVAC load calculations (Elite Software) – Ducted & ductless systems – VRF, split, rooftop, air-source heat pumps Plumbing Design for residential and commercial Buildings Electrical Design for residential and commercial Buildings Energy modeling – Title 24 energy estimation report COMcheck, REScheck, MEP coordination – clash-free Revit models, Fire protection – sprinkler hydraulic calcs, standpipe layouts (NFPA 13/14) Low-voltage – fire alarm, security, AV, nurse-call (NICET-ready) What I Deliver Fully stamped MEP sets (PDF + editable CAD/Revit) Code-compliant designs (IBC, IMC, IPC, NEC, IECC, state amendments) Fast 5–7 day turnarounds on most residential & light-commercial projects Two revision round included; additional at fixed rates Typical Projects Single-family & multi-family residential Retail shells, restaurants, offices < 20,000 sf MEP Tenant improvements & Renovations Data centers, warehouses, medical offices Software & Standards Revit 2025 | SolidWorks 2025 | RHVAC and CHVAC from Elite Software Why Clients Hire Me Since my plans are approved by the city on the first submission, I cover all the city amendments at no additional fee. One-stop stamping – no juggling multiple state PEs Very cost-effective pricing – flat fees or Hourly Zero surprises – I flag code conflicts before submittal Let’s get your plans approved. Upload your architectural set or sketch; I’ll return a firm quote within 24 hours.

I am Satyajeet Pawar, a mechanical engineering student at DY Patil College of Engineering and Technology with a strong interest in vehicle design, CAD modeling, and engineering analysis. I currently... Read more

I am Satyajeet Pawar, a mechanical engineering student at DY Patil College of Engineering and Technology with a strong interest in vehicle design, CAD modeling, and engineering analysis. I currently lead the Design Department of Team DYPCET Vectors for the SAEINDIA mBAJA competition, where I work on the design and development of our All-Terrain Vehicle (ATV). I use tools like SolidWorks and ANSYS to design, analyze, and improve mechanical systems. I enjoy learning new technologies, working on practical projects, and collaborating with teams to build better engineering solutions.

Hello! I am a senior mechanical engineering student at Stevens Institute of Technology. I am proficient in Solidworks and Creo (Pro-Engineer) and have had professional experience using both as well as... Read more

Hello! I am a senior mechanical engineering student at Stevens Institute of Technology. I am proficient in Solidworks and Creo (Pro-Engineer) and have had professional experience using both as well as in my academics. I have worked in the medical device industry both in manufacturing and in research and development.

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves,... Read more

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves, Pneumatic/Hydraulic Cylinder and Linear Sensors using CAD, FEA and Engineering analytical tools. My work include 3D Design / Modeling of parts and assemblies, 2D Manufacturing Drawings (close fit tolerances, geometric tolerances, stack up analysis), Developing / Evaluating / Optimizing Prototypes, Selecting suppliers. My project management, communications and engineering skills will be a great asset to complete your projects with high quality service in a timely manner.

I am a Mechanical Engineering student with 8+ years of experience in CAD/3D design. I can create 3D models with accompanying renders, engineering drawings, and technical documentation. I am heavily ex... Read more

I am a Mechanical Engineering student with 8+ years of experience in CAD/3D design. I can create 3D models with accompanying renders, engineering drawings, and technical documentation. I am heavily experienced in various software tools such as Onshape and SolidWorks, where I am a certified CAD Design Associate. Most of my design work is in robotics, UAVs, and automotive parts. I am in expert in rapid engineering prototyping with FDM 3D printing.

I have over 10 years of 3D modeling experience. I have worked on highly complex projects that made use of thermal and stress analysis. I have experience with solidworks, creo, inventor, NX, autocad, a... Read more

I have over 10 years of 3D modeling experience. I have worked on highly complex projects that made use of thermal and stress analysis. I have experience with solidworks, creo, inventor, NX, autocad, ansys, etc. I work on embedded electronics and have some knowledge of electrical safety and considerations to implement in my designs. I also keep in mind designing for manufacturability. I currently work on a lot of complex sheet metal designs creating high power power supplies mainly for the semiconductor industry.

Strong communication, organization, and analytical skills. Designed, rendered, and animated a 2 Stroke Internal Combustion Engine.

Strong communication, organization, and analytical skills. Designed, rendered, and animated a 2 Stroke Internal Combustion Engine.

I am a mechanical engineering professor with 15+ years in advanced manufacturing and CAD, including work at NASA and the DoD.

I am a mechanical engineering professor with 15+ years in advanced manufacturing and CAD, including work at NASA and the DoD.

Hello, I am a mechanical engineering professional, have 20 years of experiences in mechanical design, design, simulation. I worked for many different types of clients in various industries, where I su... Read more

Hello, I am a mechanical engineering professional, have 20 years of experiences in mechanical design, design, simulation. I worked for many different types of clients in various industries, where I successfully completed jobs. I could Drives multiple product development projects through to completion with a successful hand-off to manufacturing. I can provide leadership and direction on a variety of projects as needed. Performs or guides designers on highly complex Probe Card designs, creates engineering documentation and helps with CAD files from ambiguous or open-ended instructions to satisfy order requirements. Performing feasibilities on complex design & technical compliance requirements and comes up with innovative ideas to resolve various constraints. Works with designers through the completion of the design process is another thing of my skill AlSo I have Design experiments for the product or component testing Assists manufacturing whenever required on process issues concerning new or existing products. Supports sales and field applications on technical questions cause to better design and gaining DFM rewards. I Took my responsibility for form, fit, function, ease of manufacture, and cost-effectiveness of designs.

Extensive design work since 1990, BS in Mechanical engineering, 9 US patents

Extensive design work since 1990, BS in Mechanical engineering, 9 US patents

Experienced Project Engineer working in the cosmetic packaging and plastics industry. Skilled in Computer-Aided Design (CAD), design of plastic injection molded parts, Microsoft Office suite, and proj... Read more

Experienced Project Engineer working in the cosmetic packaging and plastics industry. Skilled in Computer-Aided Design (CAD), design of plastic injection molded parts, Microsoft Office suite, and project management. Strong engineering professional with a Bachelor of Science (B.S.) focused in Mechanical Engineering from New Jersey Institute of Technology.

Logan Zogby Technical Design Engineer, New Product Development BSME Mechanical Engineering, Temple University

Logan Zogby Technical Design Engineer, New Product Development BSME Mechanical Engineering, Temple University

Mechanical engineering professional currently working as a program engineer for a hydrogen integrator startup. Daily duties include procurement, inventory management, system integration, HAZOPS/FMEA,... Read more

Mechanical engineering professional currently working as a program engineer for a hydrogen integrator startup. Daily duties include procurement, inventory management, system integration, HAZOPS/FMEA, system schematic management.

Senior Mechanical Designer with over 25 years of experience in mechanical engineering, hydro-mechanical equipment, industrial structures, and manufacturing documentation. Expert in SolidWorks and Aut... Read more

Senior Mechanical Designer with over 25 years of experience in mechanical engineering, hydro-mechanical equipment, industrial structures, and manufacturing documentation. Expert in SolidWorks and AutoCAD, providing 3D modeling, mechanical design, assembly design, fabrication drawings, and reverse engineering services. My experience includes hydro-mechanical equipment for dams, steel structures, industrial machinery, procurement documentation, technical specifications, and site supervision. I focus on practical engineering solutions and production-ready designs.

* Machines and Products Research, Development and Designing * Reverse Engg, Re-Engg etc including Detailed Design Documentations, Weldment Details, Tolerances etc * Tools and Mould Designing etc. *... Read more

* Machines and Products Research, Development and Designing * Reverse Engg, Re-Engg etc including Detailed Design Documentations, Weldment Details, Tolerances etc * Tools and Mould Designing etc. * Finite Element Analysis: Static, Dynamic, Thermal, Vibration, Fatigue, Impact, Contact, Simulations etc * Mechanical Systems Designing such as Pressure Vessels, Storage Tanks, Pipings, Supports and Flanges * MEP Designing and Installation Supervision for buildings from G+1 Villas to Hotels and Amenities and Commercial Buildings upto G+24 such as Drainage, Piping, HVAC, Fire Fighting & Prevention Systems etc * Structural Designing and Construction Supervision: EDUCATION * Masters of Science (M.S) in Computer Aided Designing (CAD/CAM) with minor in Engineering Management, 1998, Northern Illinois University, USA 3.45/4 g.p.a * Bachelor of Engineering (B.E) in Mechanical Engineering, N.E.D University of Engineering and Technology, Karachi, 1992, 3.95/4 g.p.a COMPUTER EXPERTISE MathCAD, Pro-E or Creo (14000 hours), Catia upto V5R6 (3300 hours), AutoCAD (10000 hours), Unigraphics, Solid Works(5000 hours), Inventor(3000 hours Abacus(2500 hours), Ansys (15000 hours), Pro-Mechanica(5000 hours) LS-Dyna( 2800), E-Cad, HAPS(3000 hours), PV-Elite, Compress, MS Project, Ms Office, SAP, Primavera and other softwares