Hire Mechanical Engineer Designers near New Jersey, United States

Mechanical Engineer with a lot of experience with 3D printed Designs, tight tolerances, and precision kinematic mechanics. Designing is a hobby and a profession for me.

Mechanical Engineer with a lot of experience with 3D printed Designs, tight tolerances, and precision kinematic mechanics. Designing is a hobby and a profession for me.

I am a mechanical engineer with over 15 years experience in the design and manufacturing of different parts and products of automotive and automatic door industries. I am enthusiasm to learn more and... Read more

I am a mechanical engineer with over 15 years experience in the design and manufacturing of different parts and products of automotive and automatic door industries. I am enthusiasm to learn more and more and be a member of new team in new industries. I have worked for small to extra large companies and achieved a wide variety of skill sets, including design and development of various components and systems, 3D modeling and drawing, manufacturing methods, quality control and software skill of Inventor, cimco, solid works, etc. in the meantime i have several industrial design patents for some new designed parts.

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plum... Read more

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plumbing systems that pass plan review the first time. Expertise: Mechanical Engineering Design HVAC load calculations (Elite Software) – Ducted & ductless systems – VRF, split, rooftop, air-source heat pumps Plumbing Design for residential and commercial Buildings Electrical Design for residential and commercial Buildings Energy modeling – Title 24 energy estimation report COMcheck, REScheck, MEP coordination – clash-free Revit models, Fire protection – sprinkler hydraulic calcs, standpipe layouts (NFPA 13/14) Low-voltage – fire alarm, security, AV, nurse-call (NICET-ready) What I Deliver Fully stamped MEP sets (PDF + editable CAD/Revit) Code-compliant designs (IBC, IMC, IPC, NEC, IECC, state amendments) Fast 5–7 day turnarounds on most residential & light-commercial projects Two revision round included; additional at fixed rates Typical Projects Single-family & multi-family residential Retail shells, restaurants, offices < 20,000 sf MEP Tenant improvements & Renovations Data centers, warehouses, medical offices Software & Standards Revit 2025 | SolidWorks 2025 | RHVAC and CHVAC from Elite Software Why Clients Hire Me Since my plans are approved by the city on the first submission, I cover all the city amendments at no additional fee. One-stop stamping – no juggling multiple state PEs Very cost-effective pricing – flat fees or Hourly Zero surprises – I flag code conflicts before submittal Let’s get your plans approved. Upload your architectural set or sketch; I’ll return a firm quote within 24 hours.

I am a mechanical engineer with extensive knowledge in electrical controls design. Services I provide... - Mechanical Design and Documentation - Electrical Control Panel Design & Assembly - Robot Pr... Read more

I am a mechanical engineer with extensive knowledge in electrical controls design. Services I provide... - Mechanical Design and Documentation - Electrical Control Panel Design & Assembly - Robot Programming (ABB, RobotStudio) - Robotic workcell design Please feel free to contact me for any assistance on projects.

Hello! I am a senior mechanical engineering student at Stevens Institute of Technology. I am proficient in Solidworks and Creo (Pro-Engineer) and have had professional experience using both as well as... Read more

Hello! I am a senior mechanical engineering student at Stevens Institute of Technology. I am proficient in Solidworks and Creo (Pro-Engineer) and have had professional experience using both as well as in my academics. I have worked in the medical device industry both in manufacturing and in research and development.

I am Satyajeet Pawar, a mechanical engineering student at DY Patil College of Engineering and Technology with a strong interest in vehicle design, CAD modeling, and engineering analysis. I currently... Read more

I am Satyajeet Pawar, a mechanical engineering student at DY Patil College of Engineering and Technology with a strong interest in vehicle design, CAD modeling, and engineering analysis. I currently lead the Design Department of Team DYPCET Vectors for the SAEINDIA mBAJA competition, where I work on the design and development of our All-Terrain Vehicle (ATV). I use tools like SolidWorks and ANSYS to design, analyze, and improve mechanical systems. I enjoy learning new technologies, working on practical projects, and collaborating with teams to build better engineering solutions.

Degreed mechanical engineer and certified Solidworks professional. Passion for creating new things and turning ideas into reality. I specialize in 3D modeling, simulation, rendering, technical drawin... Read more

Degreed mechanical engineer and certified Solidworks professional. Passion for creating new things and turning ideas into reality. I specialize in 3D modeling, simulation, rendering, technical drawings, mechanical design, and FDM prototyping solutions.

I am a Purdue engineer with experience in AutoCAD design and modeling. I'm known for delivering innovative solutions and strong results even within tight deadlines, I combine technical expertise with... Read more

I am a Purdue engineer with experience in AutoCAD design and modeling. I'm known for delivering innovative solutions and strong results even within tight deadlines, I combine technical expertise with strong communication skills to drive successful outcomes for my clients

Senior Mechanical Engineer with 8+ Years of Experience specializing in SolidWorks, AutoCAD, parametric 3D modeling, and production drawings for mechanical products and engineered systems. Experienced... Read more

Senior Mechanical Engineer with 8+ Years of Experience specializing in SolidWorks, AutoCAD, parametric 3D modeling, and production drawings for mechanical products and engineered systems. Experienced developing manufacturing documentation, interpreting engineering and construction drawings, performing quantity takeoffs, and supporting product development from concept through production. Proven ability to collaborate with engineering, manufacturing, and vendors while delivering accurate, high-quality CAD models and technical documentation.

I am a Mechanical Engineering student with 8+ years of experience in CAD/3D design. I can create 3D models with accompanying renders, engineering drawings, and technical documentation. I am heavily ex... Read more

I am a Mechanical Engineering student with 8+ years of experience in CAD/3D design. I can create 3D models with accompanying renders, engineering drawings, and technical documentation. I am heavily experienced in various software tools such as Onshape and SolidWorks, where I am a certified CAD Design Associate. Most of my design work is in robotics, UAVs, and automotive parts. I am in expert in rapid engineering prototyping with FDM 3D printing.

Mechanical engineer with experience in CAD design, 3D modeling, and product development, focused on practical, manufacturable engineering solutions.

Mechanical engineer with experience in CAD design, 3D modeling, and product development, focused on practical, manufacturable engineering solutions.

I am a Mechanical Engineer with proficient skills in both Solidworks and AutoDesk AutoCAD. I have used AutoCAD on 2D development as a Solar PV engineer for the past 7 years. I have been using AutoCAD... Read more

I am a Mechanical Engineer with proficient skills in both Solidworks and AutoDesk AutoCAD. I have used AutoCAD on 2D development as a Solar PV engineer for the past 7 years. I have been using AutoCAD in general since 2002. My Solidworks experience is with Sheet Metal Parts and other mechanical parts and assemblies. I have been using SolidWorks since 2002 as well, with a majority of my work being done over the past 6 years. I am constantly working with both SolidWorks (2016) and AutoCAD (2014) currently. I have been working as a Freelancer for the past year and a half and I have found I am overall more productive than when I was chained to a desk. I have been involved with projects that ranged in size from a few hours worth of work through multi-month long projects. I am also very verse in the Microsoft Office Suite (Word, Excel, Power point, Project) and can develop reports to accompany parts or other tasks within the suite. I take pride in the final products of my work and always meet my deadlines. I am flexible with working hours being known to work into the early hours of the morning to complete a task.

I have over 10 years of 3D modeling experience. I have worked on highly complex projects that made use of thermal and stress analysis. I have experience with solidworks, creo, inventor, NX, autocad, a... Read more

I have over 10 years of 3D modeling experience. I have worked on highly complex projects that made use of thermal and stress analysis. I have experience with solidworks, creo, inventor, NX, autocad, ansys, etc. I work on embedded electronics and have some knowledge of electrical safety and considerations to implement in my designs. I also keep in mind designing for manufacturability. I currently work on a lot of complex sheet metal designs creating high power power supplies mainly for the semiconductor industry.

Hello, I am a mechanical engineering professional, have 20 years of experiences in mechanical design, design, simulation. I worked for many different types of clients in various industries, where I su... Read more

Hello, I am a mechanical engineering professional, have 20 years of experiences in mechanical design, design, simulation. I worked for many different types of clients in various industries, where I successfully completed jobs. I could Drives multiple product development projects through to completion with a successful hand-off to manufacturing. I can provide leadership and direction on a variety of projects as needed. Performs or guides designers on highly complex Probe Card designs, creates engineering documentation and helps with CAD files from ambiguous or open-ended instructions to satisfy order requirements. Performing feasibilities on complex design & technical compliance requirements and comes up with innovative ideas to resolve various constraints. Works with designers through the completion of the design process is another thing of my skill AlSo I have Design experiments for the product or component testing Assists manufacturing whenever required on process issues concerning new or existing products. Supports sales and field applications on technical questions cause to better design and gaining DFM rewards. I Took my responsibility for form, fit, function, ease of manufacture, and cost-effectiveness of designs.

• Mechanical Engineer with 3+ years experience in Fortune 500 company settings working as a CAD designer, drafter, and 3D Printing expert • Capable of designing and developing custom products and con... Read more

• Mechanical Engineer with 3+ years experience in Fortune 500 company settings working as a CAD designer, drafter, and 3D Printing expert • Capable of designing and developing custom products and concepts for companies, startups, and entrepreneurs • Pharmaceutical device design experience (4+ years) • Manufacturing and custom bottling services experience (2+ years) • AutoCAD 2D experience with floorplans and layouts

I'm Travis Maynard, a Mechanical Engineer with extensive experience designing low-voltage switchgear systems and custom electrical enclosures that meet demanding performance and regulatory standards.... Read more

I'm Travis Maynard, a Mechanical Engineer with extensive experience designing low-voltage switchgear systems and custom electrical enclosures that meet demanding performance and regulatory standards. Whether it's NEMA 1 for indoor simplicity or NEMA 4X for corrosion resistance in harsh environments, I’ve engineered enclosures across the full spectrum—including NEMA 1, 3R, 4, 4X, 6, and 12—to ensure safety, reliability, and durability in real-world conditions. My work includes: - Designing switchgear components to UL 891 and UL 508 standards - Applying Finite Element Analysis (FEA) to validate enclosure strength and resilience under dynamic loads - Leading the transition from 2D AutoCAD to 3D Autodesk Inventor and Vault, streamlining workflows - Engineering seismic-rated enclosures for high-performance use in earthquake-prone zones - Reverse engineering legacy enclosures using 3D photogrammetry, ensuring accurate digital documentation With tools like SolidWorks, AutoCAD, Creo Parametric, Inventor, and Epicor PLM, I bring precision, scalability, and manufacturability to every project. Whether you need full product development, reverse engineering, or specialized CAD modeling, I’m ready to help bring your concept to life with integrity and innovation.

-Have worked a mechanical engineer designing wiring harnesses for four years. -Work as a part time design engineer drafting lighting fixtures.

-Have worked a mechanical engineer designing wiring harnesses for four years. -Work as a part time design engineer drafting lighting fixtures.

I am a mechanical engineering professor with 15+ years in advanced manufacturing and CAD, including work at NASA and the DoD.

I am a mechanical engineering professor with 15+ years in advanced manufacturing and CAD, including work at NASA and the DoD.

Professional Mechanical Engineer and CAD Expert - experience in Medical Device and Automotive Engineering.

Professional Mechanical Engineer and CAD Expert - experience in Medical Device and Automotive Engineering.

A mechanical engineer with a particular liking for system designs, modelling and analysis. Areas of interest are mechanics, thermodynamics and automotive. Command over AutoCAD, Solidworks, Pro-E f... Read more

A mechanical engineer with a particular liking for system designs, modelling and analysis. Areas of interest are mechanics, thermodynamics and automotive. Command over AutoCAD, Solidworks, Pro-E for modelling. ANSYS, ABAQUS, NASTRAN, PATRAN, ADAMS, SIMSCALE and SIMPACK. In addition, adequate skills in MATLAB, C++, JavaScript and web development. Control, Automation and Interfacing using Arduino and LabView Have worked with companies like SHELL in the past. Projects done include Formula Student, Human Powered Vehicle, Hyperloop, Solar Still etc

I’m a Mechanical Engineer with experience in CAD modeling, simulation, and 3D design. Whether you need detailed mechanical designs, analysis, or custom 3D models, I can help. Skilled in SolidWorks, A... Read more

I’m a Mechanical Engineer with experience in CAD modeling, simulation, and 3D design. Whether you need detailed mechanical designs, analysis, or custom 3D models, I can help. Skilled in SolidWorks, AutoCAD, Autodesk Inventor, Creo Parametric, ANSYS, MATLAB, and Python Expertise in product design, FEA simulations, and 3D printing I value clear communication and collaboration, so let’s work together to bring your ideas to life!

Extensive design work since 1990, BS in Mechanical engineering, 9 US patents

Extensive design work since 1990, BS in Mechanical engineering, 9 US patents

Experienced Project Engineer working in the cosmetic packaging and plastics industry. Skilled in Computer-Aided Design (CAD), design of plastic injection molded parts, Microsoft Office suite, and proj... Read more

Experienced Project Engineer working in the cosmetic packaging and plastics industry. Skilled in Computer-Aided Design (CAD), design of plastic injection molded parts, Microsoft Office suite, and project management. Strong engineering professional with a Bachelor of Science (B.S.) focused in Mechanical Engineering from New Jersey Institute of Technology.

Logan Zogby Technical Design Engineer, New Product Development BSME Mechanical Engineering, Temple University

Logan Zogby Technical Design Engineer, New Product Development BSME Mechanical Engineering, Temple University

Mechanical Engineer with experience in designing plastic parts and machinery with Autodesk Inventor and AutoCAD. Experienced in CAD/CAM/Simulation

Mechanical Engineer with experience in designing plastic parts and machinery with Autodesk Inventor and AutoCAD. Experienced in CAD/CAM/Simulation

American born and educated mechanical engineer seeking product development projects and opportunities.

American born and educated mechanical engineer seeking product development projects and opportunities.

Mechanical engineering professional currently working as a program engineer for a hydrogen integrator startup. Daily duties include procurement, inventory management, system integration, HAZOPS/FMEA,... Read more

Mechanical engineering professional currently working as a program engineer for a hydrogen integrator startup. Daily duties include procurement, inventory management, system integration, HAZOPS/FMEA, system schematic management.