Hire Construction Engineering & Inspection Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

- Mechanical engineer with manufacturing background - SolidWorks, Creo, Simulation, Ansys, FEA - New product concept design - Fixture design for automation, manufacturing, testing or inspection -... Read more

- Mechanical engineer with manufacturing background - SolidWorks, Creo, Simulation, Ansys, FEA - New product concept design - Fixture design for automation, manufacturing, testing or inspection - Machined, sheet metal, or plastic parts - Medical, semi-conductor, aerospace and consumer products

I have been in the architectural and engineering project management business for over 35 years. My experience includes residential, commercial, educational, religious, retail, and aviation projects. I... Read more

I have been in the architectural and engineering project management business for over 35 years. My experience includes residential, commercial, educational, religious, retail, and aviation projects. I have an accomplished career in completing projects on time and within budget constraints.

I am a moderately experienced CAD Designer, Engineer, and Drafter. I have regularly practiced drafting for close to 5 years. I'm fluent in many software suites, including AutoCAD, Inventor, Revit, Sol... Read more

I am a moderately experienced CAD Designer, Engineer, and Drafter. I have regularly practiced drafting for close to 5 years. I'm fluent in many software suites, including AutoCAD, Inventor, Revit, Solidworks, Creo, and Solid Edge. I primarily work on manufacturing projects but have also worked on a variety of others, such as a pier set to go up in New York in the next 2 years, and an electric cart that I designed and lead a team of 4 to fabricate and race the cart as part of the 2018 National Electric Cart Association Race. As part of the CAD II program, I designed and drafted floor plans for a modular house that was to be built by the 2018-2019 Construction class. I currently work as an independant contractor doing both design work and drafting work, primarily support for clients including Bissel, Steelcase, and large military contractors in the past.

With more than ten years in the manufacturing and technical fields I deliver quality cost effective product designs. I provide 3-D modeling, drafting and design engineering services to support your pr... Read more

With more than ten years in the manufacturing and technical fields I deliver quality cost effective product designs. I provide 3-D modeling, drafting and design engineering services to support your project. Project success is something that I strive for because the sense of accomplishment it brings. It drives me to deliver the most practical and cost effective solutions that customers need. With a vast experience in manufacturing methods I can ensure that a cost effective design solution will be developed. I have experience with manufacturing methods such as Machining, Plastic Injection Molding, 3-D printing (FDM, SLS, Polyjet, DMLS), Laser Marking, and Hydro-Forming. I can deliver sound and practical concepts tailored to a specific manufacturing method making it as inexpensive as possible.

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling,... Read more

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling, storm water management planning, water supply systems and modeling, non-revenue water reduction strategies, subsurface utility engineering, municipal engineering, urban planning, transportation and project management. He has been involved as Civil Engineering Lead and Utility Design Lead on a number of projects, having extensive project cycle experience, from front-end studies to full EPCM / EPC mandates as well as P3 Design Build Projects, including planning, design, construction, and installation phases in complex, time-sensitive environments.

Senior Lead Piping/Senior Lead Checker/Instrumentation Design Drafter/CAD Administration with extensive multi-discipline design and drafting competence, information management technology administrator... Read more

Senior Lead Piping/Senior Lead Checker/Instrumentation Design Drafter/CAD Administration with extensive multi-discipline design and drafting competence, information management technology administrator, technical publication editor, adjunct community college instructor, and professional WEB graphics expert. Providing successful managerial, supervisory, lead, and job production performance. A team-oriented forward thinking mediator for progressive solutions with a proven ability to successfully analyze an organization's critical support requirements, recognizing deficiencies, potential opportunities, and develop leading-edge solutions for increasing reliability and improving productivity. A dynamic consummate student with expedient learning capabilities coursing the constant evolution in industry standards, production tools, and requirements needed to maintain highly effective final product presentations. Completed PMP. Advanced Energy PMP, and PLM certification designations. Worked with various project management tools throughout the years PRIMAVERA, SmartSheet, LOTUS NOTES, Merlin, SAP, SOAP, Share Point software. Trained and competent in many of the industry’s leading intelligence gathering software i.e. Total Station, FARO, Leica, Quantapoint, various point cloud software. CURRENT: TWIC, ISTC W/ BASIC, HASC W/ BASIC, PASSPORT, DRIVER’S LICENSE.